1 /* 2 * Copyright (c) 2011-2012 The Chromium OS Authors. 3 * SPDX-License-Identifier: GPL-2.0+ 4 */ 5 6 #ifndef __SANDBOX_STATE_H 7 #define __SANDBOX_STATE_H 8 9 #include <config.h> 10 #include <stdbool.h> 11 #include <linux/stringify.h> 12 13 /* How we exited U-Boot */ 14 enum exit_type_id { 15 STATE_EXIT_NORMAL, 16 STATE_EXIT_COLD_REBOOT, 17 STATE_EXIT_POWER_OFF, 18 }; 19 20 /** 21 * Selects the behavior of the serial terminal. 22 * 23 * If Ctrl-C is processed by U-Boot, then the only way to quit sandbox is with 24 * the 'reset' command, or equivalent. 25 * 26 * If the terminal is cooked, then Ctrl-C will terminate U-Boot, and the 27 * command line will not be quite such a faithful emulation. 28 * 29 * Options are: 30 * 31 * raw-with-sigs - Raw, but allow signals (Ctrl-C will quit) 32 * raw - Terminal is always raw 33 * cooked - Terminal is always cooked 34 */ 35 enum state_terminal_raw { 36 STATE_TERM_RAW_WITH_SIGS, /* Default */ 37 STATE_TERM_RAW, 38 STATE_TERM_COOKED, 39 40 STATE_TERM_COUNT, 41 }; 42 43 struct sandbox_spi_info { 44 const char *spec; 45 struct udevice *emul; 46 }; 47 48 /* The complete state of the test system */ 49 struct sandbox_state { 50 const char *cmd; /* Command to execute */ 51 bool interactive; /* Enable cmdline after execute */ 52 const char *fdt_fname; /* Filename of FDT binary */ 53 enum exit_type_id exit_type; /* How we exited U-Boot */ 54 const char *parse_err; /* Error to report from parsing */ 55 int argc; /* Program arguments */ 56 char **argv; /* Command line arguments */ 57 const char *jumped_fname; /* Jumped from previous U_Boot */ 58 uint8_t *ram_buf; /* Emulated RAM buffer */ 59 unsigned int ram_size; /* Size of RAM buffer */ 60 const char *ram_buf_fname; /* Filename to use for RAM buffer */ 61 bool ram_buf_rm; /* Remove RAM buffer file after read */ 62 bool write_ram_buf; /* Write RAM buffer on exit */ 63 const char *state_fname; /* File containing sandbox state */ 64 void *state_fdt; /* Holds saved state for sandbox */ 65 bool read_state; /* Read sandbox state on startup */ 66 bool write_state; /* Write sandbox state on exit */ 67 bool ignore_missing_state_on_read; /* No error if state missing */ 68 bool show_lcd; /* Show LCD on start-up */ 69 enum state_terminal_raw term_raw; /* Terminal raw/cooked */ 70 71 /* Pointer to information for each SPI bus/cs */ 72 struct sandbox_spi_info spi[CONFIG_SANDBOX_SPI_MAX_BUS] 73 [CONFIG_SANDBOX_SPI_MAX_CS]; 74 }; 75 76 /* Minimum space we guarantee in the state FDT when calling read/write*/ 77 #define SANDBOX_STATE_MIN_SPACE 0x1000 78 79 /** 80 * struct sandbox_state_io - methods to saved/restore sandbox state 81 * @name: Name of of the device tree node, also the name of the variable 82 * holding this data so it should be an identifier (use underscore 83 * instead of minus) 84 * @compat: Compatible string for the node containing this state 85 * 86 * @read: Function to read state from FDT 87 * If data is available, then blob and node will provide access to it. If 88 * not (blob == NULL and node == -1) this function should set up an empty 89 * data set for start-of-day. 90 * @param blob: Pointer to device tree blob, or NULL if no data to read 91 * @param node: Node offset to read from 92 * @return 0 if OK, -ve on error 93 * 94 * @write: Function to write state to FDT 95 * The caller will ensure that there is a node ready for the state. The 96 * node may already contain the old state, in which case it should be 97 * overridden. There is guaranteed to be SANDBOX_STATE_MIN_SPACE bytes 98 * of free space, so error checking is not required for fdt_setprop...() 99 * calls which add up to less than this much space. 100 * 101 * For adding larger properties, use state_setprop(). 102 * 103 * @param blob: Device tree blob holding state 104 * @param node: Node to write our state into 105 * 106 * Note that it is possible to save data as large blobs or as individual 107 * hierarchical properties. However, unless you intend to keep state files 108 * around for a long time and be able to run an old state file on a new 109 * sandbox, it might not be worth using individual properties for everything. 110 * This is certainly supported, it is just a matter of the effort you wish 111 * to put into the state read/write feature. 112 */ 113 struct sandbox_state_io { 114 const char *name; 115 const char *compat; 116 int (*write)(void *blob, int node); 117 int (*read)(const void *blob, int node); 118 }; 119 120 /** 121 * SANDBOX_STATE_IO - Declare sandbox state to read/write 122 * 123 * Sandbox permits saving state from one run and restoring it in another. This 124 * allows the test system to retain state between runs and thus better 125 * emulate a real system. Examples of state that might be useful to save are 126 * the emulated GPIOs pin settings, flash memory contents and TPM private 127 * data. U-Boot memory contents is dealth with separately since it is large 128 * and it is not normally useful to save it (since a normal system does not 129 * preserve DRAM between runs). See the '-m' option for this. 130 * 131 * See struct sandbox_state_io above for member documentation. 132 */ 133 #define SANDBOX_STATE_IO(_name, _compat, _read, _write) \ 134 ll_entry_declare(struct sandbox_state_io, _name, state_io) = { \ 135 .name = __stringify(_name), \ 136 .read = _read, \ 137 .write = _write, \ 138 .compat = _compat, \ 139 } 140 141 /** 142 * Record the exit type to be reported by the test program. 143 * 144 * @param exit_type Exit type to record 145 */ 146 void state_record_exit(enum exit_type_id exit_type); 147 148 /** 149 * Gets a pointer to the current state. 150 * 151 * @return pointer to state 152 */ 153 struct sandbox_state *state_get_current(void); 154 155 /** 156 * Read the sandbox state from the supplied device tree file 157 * 158 * This calls all registered state handlers to read in the sandbox state 159 * from a previous test run. 160 * 161 * @param state Sandbox state to update 162 * @param fname Filename of device tree file to read from 163 * @return 0 if OK, -ve on error 164 */ 165 int sandbox_read_state(struct sandbox_state *state, const char *fname); 166 167 /** 168 * Write the sandbox state to the supplied device tree file 169 * 170 * This calls all registered state handlers to write out the sandbox state 171 * so that it can be preserved for a future test run. 172 * 173 * If the file exists it is overwritten. 174 * 175 * @param state Sandbox state to update 176 * @param fname Filename of device tree file to write to 177 * @return 0 if OK, -ve on error 178 */ 179 int sandbox_write_state(struct sandbox_state *state, const char *fname); 180 181 /** 182 * Add a property to a sandbox state node 183 * 184 * This is equivalent to fdt_setprop except that it automatically enlarges 185 * the device tree if necessary. That means it is safe to write any amount 186 * of data here. 187 * 188 * This function can only be called from within struct sandbox_state_io's 189 * ->write method, i.e. within state I/O drivers. 190 * 191 * @param node Device tree node to write to 192 * @param prop_name Property to write 193 * @param data Data to write into property 194 * @param size Size of data to write into property 195 */ 196 int state_setprop(int node, const char *prop_name, const void *data, int size); 197 198 /** 199 * Initialize the test system state 200 */ 201 int state_init(void); 202 203 /** 204 * Uninitialize the test system state, writing out state if configured to 205 * do so. 206 * 207 * @return 0 if OK, -ve on error 208 */ 209 int state_uninit(void); 210 211 #endif 212