xref: /openbmc/u-boot/arch/sandbox/dts/sandbox64.dts (revision 9d466f2f) 
1/dts-v1/;
2
3#define USB_CLASS_HUB			9
4
5/ {
6	#address-cells = <2>;
7	#size-cells = <2>;
8	model = "sandbox";
9
10	aliases {
11		eth5 = "/eth@90000000";
12		i2c0 = &i2c_0;
13		pci0 = &pci;
14		rtc0 = &rtc_0;
15	};
16
17	chosen {
18		stdout-path = "/serial";
19	};
20
21	cros_ec: cros-ec@0 {
22		reg = <0 0 0 0>;
23		compatible = "google,cros-ec-sandbox";
24
25		/*
26		 * This describes the flash memory within the EC. Note
27		 * that the STM32L flash erases to 0, not 0xff.
28		 */
29		#address-cells = <1>;
30		#size-cells = <1>;
31		flash@8000000 {
32			reg = <0x08000000 0x20000>;
33			erase-value = <0>;
34			#address-cells = <1>;
35			#size-cells = <1>;
36
37			/* Information for sandbox */
38			ro {
39				reg = <0 0xf000>;
40			};
41			wp-ro {
42				reg = <0xf000 0x1000>;
43			};
44			rw {
45				reg = <0x10000 0x10000>;
46			};
47		};
48	};
49
50	eth@10002000 {
51		compatible = "sandbox,eth";
52		reg = <0x0 0x10002000 0x0 0x1000>;
53		fake-host-hwaddr = [00 00 66 44 22 00];
54	};
55
56	eth@80000000 {
57		compatible = "sandbox,eth-raw";
58		reg = <0x0 0x80000000 0x0 0x1000>;
59		host-raw-interface = "eth0";
60	};
61
62	eth@90000000 {
63		compatible = "sandbox,eth-raw";
64		reg = <0x0 0x90000000 0x0 0x1000>;
65		host-raw-interface = "lo";
66	};
67
68	gpio_a: gpios@0 {
69		gpio-controller;
70		compatible = "sandbox,gpio";
71		#gpio-cells = <1>;
72		gpio-bank-name = "a";
73		sandbox,gpio-count = <20>;
74	};
75
76	gpio_b: gpios@1 {
77		gpio-controller;
78		compatible = "sandbox,gpio";
79		#gpio-cells = <2>;
80		gpio-bank-name = "b";
81		sandbox,gpio-count = <10>;
82	};
83
84	hexagon {
85		compatible = "demo-simple";
86		colour = "white";
87		sides = <6>;
88	};
89
90	i2c_0: i2c@0 {
91		#address-cells = <1>;
92		#size-cells = <0>;
93		reg = <0 0 0 0>;
94		compatible = "sandbox,i2c";
95		clock-frequency = <400000>;
96		pinctrl-names = "default";
97		pinctrl-0 = <&pinctrl_i2c0>;
98		eeprom@2c {
99			reg = <0x2c>;
100			compatible = "i2c-eeprom";
101			emul {
102				compatible = "sandbox,i2c-eeprom";
103				sandbox,filename = "i2c.bin";
104				sandbox,size = <128>;
105			};
106		};
107
108		rtc_0: rtc@43 {
109			reg = <0x43>;
110			compatible = "sandbox-rtc";
111			emul {
112				compatible = "sandbox,i2c-rtc";
113			};
114		};
115		sandbox_pmic: sandbox_pmic {
116			reg = <0x40>;
117		};
118	};
119
120	lcd {
121		u-boot,dm-pre-reloc;
122		compatible = "sandbox,lcd-sdl";
123		xres = <1366>;
124		yres = <768>;
125	};
126
127	leds {
128		compatible = "gpio-leds";
129
130		iracibble {
131			gpios = <&gpio_a 1 0>;
132			label = "sandbox:red";
133		};
134
135		martinet {
136			gpios = <&gpio_a 2 0>;
137			label = "sandbox:green";
138		};
139	};
140
141	pci: pci-controller {
142		compatible = "sandbox,pci";
143		device_type = "pci";
144		#address-cells = <3>;
145		#size-cells = <2>;
146		ranges = <0x02000000 0 0x10000000 0 0x10000000 0 0x2000
147				0x01000000 0 0x20000000 0 0x20000000 0 0x2000>;
148		pci@1f,0 {
149			compatible = "pci-generic";
150			reg = <0xf800 0 0 0 0>;
151			emul@1f,0 {
152				compatible = "sandbox,swap-case";
153			};
154		};
155	};
156
157	pinctrl {
158		compatible = "sandbox,pinctrl";
159
160		pinctrl_i2c0: i2c0 {
161			groups = "i2c";
162			function = "i2c";
163			bias-pull-up;
164		};
165
166		pinctrl_serial0: uart0 {
167			groups = "serial_a";
168			function = "serial";
169		};
170	};
171
172	reset@1 {
173		compatible = "sandbox,reset";
174	};
175
176	spi@0 {
177		#address-cells = <1>;
178		#size-cells = <0>;
179		reg = <0 0 0 0>;
180		compatible = "sandbox,spi";
181		cs-gpios = <0>, <&gpio_a 0>;
182		firmware_storage_spi: flash@0 {
183			reg = <0>;
184			compatible = "spansion,m25p16", "sandbox,spi-flash";
185			spi-max-frequency = <40000000>;
186			sandbox,filename = "spi.bin";
187		};
188	};
189
190	spl-test {
191		u-boot,dm-pre-reloc;
192		compatible = "sandbox,spl-test";
193		boolval;
194		intval = <1>;
195		intarray = <2 3 4>;
196		byteval = [05];
197		bytearray = [06];
198		longbytearray = [09 0a 0b 0c 0d 0e 0f 10 11];
199		stringval = "message";
200		stringarray = "multi-word", "message";
201	};
202
203	spl-test2 {
204		u-boot,dm-pre-reloc;
205		compatible = "sandbox,spl-test";
206		intval = <3>;
207		intarray = <5>;
208		byteval = [08];
209		bytearray = [01 23 34];
210		longbytearray = [09 0a 0b 0c];
211		stringval = "message2";
212		stringarray = "another", "multi-word", "message";
213	};
214
215	spl-test3 {
216		u-boot,dm-pre-reloc;
217		compatible = "sandbox,spl-test";
218		stringarray = "one";
219	};
220
221	spl-test4 {
222		u-boot,dm-pre-reloc;
223		compatible = "sandbox,spl-test.2";
224	};
225
226	square {
227		compatible = "demo-shape";
228		colour = "blue";
229		sides = <4>;
230	};
231
232	timer {
233		compatible = "sandbox,timer";
234		clock-frequency = <1000000>;
235	};
236
237	tpm {
238		compatible = "google,sandbox-tpm";
239	};
240
241	triangle {
242		compatible = "demo-shape";
243		colour = "cyan";
244		sides = <3>;
245		character = <83>;
246		light-gpios = <&gpio_a 2>, <&gpio_b 6 0>;
247	};
248
249	/* Needs to be available prior to relocation */
250	uart0: serial {
251		compatible = "sandbox,serial";
252		sandbox,text-colour = "cyan";
253		pinctrl-names = "default";
254		pinctrl-0 = <&pinctrl_serial0>;
255	};
256
257	usb@0 {
258		compatible = "sandbox,usb";
259		status = "disabled";
260		hub {
261			compatible = "sandbox,usb-hub";
262			#address-cells = <1>;
263			#size-cells = <0>;
264			flash-stick {
265				reg = <0>;
266				compatible = "sandbox,usb-flash";
267			};
268		};
269	};
270
271	usb@1 {
272		compatible = "sandbox,usb";
273		hub {
274			compatible = "usb-hub";
275			usb,device-class = <USB_CLASS_HUB>;
276			hub-emul {
277				compatible = "sandbox,usb-hub";
278				#address-cells = <1>;
279				#size-cells = <0>;
280				flash-stick {
281					reg = <0>;
282					compatible = "sandbox,usb-flash";
283					sandbox,filepath = "flash.bin";
284				};
285			};
286		};
287	};
288
289	usb@2 {
290		compatible = "sandbox,usb";
291		status = "disabled";
292	};
293
294	spmi: spmi@0 {
295		compatible = "sandbox,spmi";
296		#address-cells = <0x1>;
297		#size-cells = <0x1>;
298		pm8916@0 {
299			compatible = "qcom,spmi-pmic";
300			reg = <0x0 0x1>;
301			#address-cells = <0x1>;
302			#size-cells = <0x1>;
303
304			spmi_gpios: gpios@c000 {
305				compatible = "qcom,pm8916-gpio";
306				reg = <0xc000 0x400>;
307				gpio-controller;
308				gpio-count = <4>;
309				#gpio-cells = <2>;
310				gpio-bank-name="spmi";
311			};
312		};
313	};
314};
315
316#include "cros-ec-keyboard.dtsi"
317#include "sandbox_pmic.dtsi"
318