1/dts-v1/; 2 3#define USB_CLASS_HUB 9 4 5/ { 6 #address-cells = <1>; 7 #size-cells = <1>; 8 9 aliases { 10 eth5 = "/eth@90000000"; 11 i2c0 = &i2c_0; 12 pci0 = &pci; 13 rtc0 = &rtc_0; 14 }; 15 16 chosen { 17 stdout-path = "/serial"; 18 }; 19 20 cros_ec: cros-ec@0 { 21 reg = <0 0>; 22 compatible = "google,cros-ec-sandbox"; 23 24 /* 25 * This describes the flash memory within the EC. Note 26 * that the STM32L flash erases to 0, not 0xff. 27 */ 28 #address-cells = <1>; 29 #size-cells = <1>; 30 flash@8000000 { 31 reg = <0x08000000 0x20000>; 32 erase-value = <0>; 33 #address-cells = <1>; 34 #size-cells = <1>; 35 36 /* Information for sandbox */ 37 ro { 38 reg = <0 0xf000>; 39 }; 40 wp-ro { 41 reg = <0xf000 0x1000>; 42 }; 43 rw { 44 reg = <0x10000 0x10000>; 45 }; 46 }; 47 }; 48 49 eth@10002000 { 50 compatible = "sandbox,eth"; 51 reg = <0x10002000 0x1000>; 52 fake-host-hwaddr = [00 00 66 44 22 00]; 53 }; 54 55 eth@80000000 { 56 compatible = "sandbox,eth-raw"; 57 reg = <0x80000000 0x1000>; 58 host-raw-interface = "eth0"; 59 }; 60 61 eth@90000000 { 62 compatible = "sandbox,eth-raw"; 63 reg = <0x90000000 0x1000>; 64 host-raw-interface = "lo"; 65 }; 66 67 gpio_a: gpios@0 { 68 gpio-controller; 69 compatible = "sandbox,gpio"; 70 #gpio-cells = <1>; 71 gpio-bank-name = "a"; 72 num-gpios = <20>; 73 }; 74 75 gpio_b: gpios@1 { 76 gpio-controller; 77 compatible = "sandbox,gpio"; 78 #gpio-cells = <2>; 79 gpio-bank-name = "b"; 80 num-gpios = <10>; 81 }; 82 83 hexagon { 84 compatible = "demo-simple"; 85 colour = "white"; 86 sides = <6>; 87 }; 88 89 i2c_0: i2c@0 { 90 #address-cells = <1>; 91 #size-cells = <0>; 92 reg = <0 0>; 93 compatible = "sandbox,i2c"; 94 clock-frequency = <400000>; 95 pinctrl-names = "default"; 96 pinctrl-0 = <&pinctrl_i2c0>; 97 eeprom@2c { 98 reg = <0x2c>; 99 compatible = "i2c-eeprom"; 100 emul { 101 compatible = "sandbox,i2c-eeprom"; 102 sandbox,filename = "i2c.bin"; 103 sandbox,size = <128>; 104 }; 105 }; 106 107 rtc_0: rtc@43 { 108 reg = <0x43>; 109 compatible = "sandbox-rtc"; 110 emul { 111 compatible = "sandbox,i2c-rtc"; 112 }; 113 }; 114 sandbox_pmic: sandbox_pmic { 115 reg = <0x40>; 116 }; 117 }; 118 119 lcd { 120 u-boot,dm-pre-reloc; 121 compatible = "sandbox,lcd-sdl"; 122 xres = <1366>; 123 yres = <768>; 124 }; 125 126 pci: pci-controller { 127 compatible = "sandbox,pci"; 128 device_type = "pci"; 129 #address-cells = <3>; 130 #size-cells = <2>; 131 ranges = <0x02000000 0 0x10000000 0x10000000 0 0x2000 132 0x01000000 0 0x20000000 0x20000000 0 0x2000>; 133 pci@1f,0 { 134 compatible = "pci-generic"; 135 reg = <0xf800 0 0 0 0>; 136 emul@1f,0 { 137 compatible = "sandbox,swap-case"; 138 }; 139 }; 140 }; 141 142 pinctrl { 143 compatible = "sandbox,pinctrl"; 144 145 pinctrl_i2c0: i2c0 { 146 groups = "i2c"; 147 function = "i2c"; 148 bias-pull-up; 149 }; 150 151 pinctrl_serial0: uart0 { 152 groups = "serial_a"; 153 function = "serial"; 154 }; 155 }; 156 157 reset@1 { 158 compatible = "sandbox,reset"; 159 }; 160 161 spi@0 { 162 #address-cells = <1>; 163 #size-cells = <0>; 164 reg = <0 0>; 165 compatible = "sandbox,spi"; 166 cs-gpios = <0>, <&gpio_a 0>; 167 firmware_storage_spi: flash@0 { 168 reg = <0>; 169 compatible = "spansion,m25p16", "sandbox,spi-flash"; 170 spi-max-frequency = <40000000>; 171 sandbox,filename = "spi.bin"; 172 }; 173 }; 174 175 spl-test { 176 u-boot,dm-pre-reloc; 177 compatible = "sandbox,spl-test"; 178 boolval; 179 intval = <1>; 180 intarray = <2 3 4>; 181 byteval = [05]; 182 bytearray = [06]; 183 longbytearray = [09 0a 0b 0c 0d 0e 0f 10 11]; 184 stringval = "message"; 185 stringarray = "multi-word", "message"; 186 }; 187 188 spl-test2 { 189 u-boot,dm-pre-reloc; 190 compatible = "sandbox,spl-test"; 191 intval = <3>; 192 intarray = <5>; 193 byteval = [08]; 194 bytearray = [01 23 34]; 195 longbytearray = [09 0a 0b 0c]; 196 stringval = "message2"; 197 stringarray = "another", "multi-word", "message"; 198 }; 199 200 spl-test3 { 201 u-boot,dm-pre-reloc; 202 compatible = "sandbox,spl-test"; 203 stringarray = "one"; 204 }; 205 206 square { 207 compatible = "demo-shape"; 208 colour = "blue"; 209 sides = <4>; 210 }; 211 212 timer { 213 compatible = "sandbox,timer"; 214 clock-frequency = <1000000>; 215 }; 216 217 tpm { 218 compatible = "google,sandbox-tpm"; 219 }; 220 221 triangle { 222 compatible = "demo-shape"; 223 colour = "cyan"; 224 sides = <3>; 225 character = <83>; 226 light-gpios = <&gpio_a 2>, <&gpio_b 6 0>; 227 }; 228 229 /* Needs to be available prior to relocation */ 230 uart0: serial { 231 compatible = "sandbox,serial"; 232 sandbox,text-colour = "cyan"; 233 pinctrl-names = "default"; 234 pinctrl-0 = <&pinctrl_serial0>; 235 }; 236 237 usb@0 { 238 compatible = "sandbox,usb"; 239 status = "disabled"; 240 hub { 241 compatible = "sandbox,usb-hub"; 242 #address-cells = <1>; 243 #size-cells = <0>; 244 flash-stick { 245 reg = <0>; 246 compatible = "sandbox,usb-flash"; 247 }; 248 }; 249 }; 250 251 usb@1 { 252 compatible = "sandbox,usb"; 253 hub { 254 compatible = "usb-hub"; 255 usb,device-class = <USB_CLASS_HUB>; 256 hub-emul { 257 compatible = "sandbox,usb-hub"; 258 #address-cells = <1>; 259 #size-cells = <0>; 260 flash-stick { 261 reg = <0>; 262 compatible = "sandbox,usb-flash"; 263 sandbox,filepath = "flash.bin"; 264 }; 265 }; 266 }; 267 }; 268 269 usb@2 { 270 compatible = "sandbox,usb"; 271 status = "disabled"; 272 }; 273 274 spmi: spmi@0 { 275 compatible = "sandbox,spmi"; 276 #address-cells = <0x1>; 277 #size-cells = <0x1>; 278 pm8916@0 { 279 compatible = "qcom,spmi-pmic"; 280 reg = <0x0 0x1>; 281 #address-cells = <0x1>; 282 #size-cells = <0x1>; 283 284 spmi_gpios: gpios@c000 { 285 compatible = "qcom,pm8916-gpio"; 286 reg = <0xc000 0x400>; 287 gpio-controller; 288 gpio-count = <4>; 289 #gpio-cells = <2>; 290 gpio-bank-name="spmi"; 291 }; 292 }; 293 }; 294}; 295 296#include "cros-ec-keyboard.dtsi" 297#include "sandbox_pmic.dtsi" 298