xref: /openbmc/u-boot/arch/riscv/cpu/start.S (revision 4854ebc5)
1/* SPDX-License-Identifier: GPL-2.0+ */
2/*
3 * Startup Code for RISC-V Core
4 *
5 * Copyright (c) 2017 Microsemi Corporation.
6 * Copyright (c) 2017 Padmarao Begari <Padmarao.Begari@microsemi.com>
7 *
8 * Copyright (C) 2017 Andes Technology Corporation
9 * Rick Chen, Andes Technology Corporation <rick@andestech.com>
10 */
11
12#include <asm-offsets.h>
13#include <config.h>
14#include <common.h>
15#include <elf.h>
16#include <asm/encoding.h>
17
18#ifdef CONFIG_32BIT
19#define LREG 			lw
20#define SREG 			sw
21#define REGBYTES 		4
22#define RELOC_TYPE		R_RISCV_32
23#define SYM_INDEX		0x8
24#define SYM_SIZE		0x10
25#else
26#define LREG 			ld
27#define SREG 			sd
28#define REGBYTES 		8
29#define RELOC_TYPE		R_RISCV_64
30#define SYM_INDEX		0x20
31#define SYM_SIZE		0x18
32#endif
33
34.section      .text
35.globl _start
36_start:
37	j handle_reset
38
39nmi_vector:
40	j nmi_vector
41
42trap_vector:
43	j trap_entry
44
45.global trap_entry
46handle_reset:
47	li t0, CONFIG_SYS_SDRAM_BASE
48	SREG a2, 0(t0)
49	la t0, trap_entry
50	csrw mtvec, t0
51	csrwi mstatus, 0
52	csrwi mie, 0
53
54/*
55 * Do CPU critical regs init only at reboot,
56 * not when booting from ram
57 */
58#ifdef CONFIG_INIT_CRITICAL
59	jal cpu_init_crit	/* Do CPU critical regs init */
60#endif
61
62/*
63 * Set stackpointer in internal/ex RAM to call board_init_f
64 */
65call_board_init_f:
66	li  t0, -16
67	li  t1, CONFIG_SYS_INIT_SP_ADDR
68	and sp, t1, t0	/* force 16 byte alignment */
69
70#ifdef CONFIG_DEBUG_UART
71	jal	debug_uart_init
72#endif
73
74call_board_init_f_0:
75	mv	a0, sp
76	jal	board_init_f_alloc_reserve
77	mv	sp, a0
78	jal	board_init_f_init_reserve
79
80	mv  a0, zero	/* a0 <-- boot_flags = 0 */
81	la t5, board_init_f
82	jr t5		/* jump to board_init_f() */
83
84/*
85 * void relocate_code (addr_sp, gd, addr_moni)
86 *
87 * This "function" does not return, instead it continues in RAM
88 * after relocating the monitor code.
89 *
90 */
91.globl relocate_code
92relocate_code:
93	mv  s2, a0	/* save addr_sp */
94	mv  s3, a1	/* save addr of gd */
95	mv  s4, a2	/* save addr of destination */
96
97/*
98 *Set up the stack
99 */
100stack_setup:
101	mv sp, s2
102	la t0, _start
103	sub t6, s4, t0	/* t6 <- relocation offset */
104	beq t0, s4, clear_bss	/* skip relocation */
105
106	mv t1, s4	/* t1 <- scratch for copy_loop */
107	la t3, __bss_start
108	sub t3, t3, t0	/* t3 <- __bss_start_ofs */
109	add t2, t0, t3	/* t2 <- source end address */
110
111copy_loop:
112	LREG t5, 0(t0)
113	addi t0, t0, REGBYTES
114	SREG t5, 0(t1)
115	addi t1, t1, REGBYTES
116	blt t0, t2, copy_loop
117
118/*
119 * Update dynamic relocations after board_init_f
120 */
121fix_rela_dyn:
122	la  t1, __rel_dyn_start
123	la  t2, __rel_dyn_end
124	beq t1, t2, clear_bss
125	add t1, t1, t6			/* t1 <- rela_dyn_start in RAM */
126	add t2, t2, t6			/* t2 <- rela_dyn_end in RAM */
127
128/*
129 * skip first reserved entry: address, type, addend
130 */
131	bne t1, t2, 7f
132
1336:
134	LREG  t5, -(REGBYTES*2)(t1)	/* t5 <-- relocation info:type */
135	li  t3, R_RISCV_RELATIVE	/* reloc type R_RISCV_RELATIVE */
136	bne t5, t3, 8f			/* skip non-RISCV_RELOC entries */
137	LREG t3, -(REGBYTES*3)(t1)
138	LREG t5, -(REGBYTES)(t1)	/* t5 <-- addend */
139	add t5, t5, t6			/* t5 <-- location to fix up in RAM */
140	add t3, t3, t6			/* t3 <-- location to fix up in RAM */
141	SREG t5, 0(t3)
1427:
143	addi t1, t1, (REGBYTES*3)
144	ble t1, t2, 6b
145
1468:
147	la  t4, __dyn_sym_start
148	add t4, t4, t6
149
1509:
151	LREG  t5, -(REGBYTES*2)(t1)	/* t5 <-- relocation info:type */
152	srli t0, t5, SYM_INDEX		/* t0 <--- sym table index */
153	andi t5, t5, 0xFF		/* t5 <--- relocation type */
154	li  t3, RELOC_TYPE
155	bne t5, t3, 10f 		/* skip non-addned entries */
156
157	LREG t3, -(REGBYTES*3)(t1)
158	li t5, SYM_SIZE
159	mul t0, t0, t5
160	add s1, t4, t0
161	LREG t5, REGBYTES(s1)
162	add t5, t5, t6			/* t5 <-- location to fix up in RAM */
163	add t3, t3, t6			/* t3 <-- location to fix up in RAM */
164	SREG t5, 0(t3)
16510:
166	addi t1, t1, (REGBYTES*3)
167	ble t1, t2, 9b
168
169/*
170 * trap update
171*/
172	la t0, trap_entry
173	add t0, t0, t6
174	csrw mtvec, t0
175
176clear_bss:
177	la t0, __bss_start		/* t0 <- rel __bss_start in FLASH */
178	add t0, t0, t6			/* t0 <- rel __bss_start in RAM */
179	la t1, __bss_end		/* t1 <- rel __bss_end in FLASH */
180	add t1, t1, t6			/* t1 <- rel __bss_end in RAM */
181	li t2, 0x00000000		/* clear */
182	beq t0, t1, call_board_init_r
183
184clbss_l:
185	SREG t2, 0(t0)			/* clear loop... */
186	addi t0, t0, REGBYTES
187	bne t0, t1, clbss_l
188
189/*
190 * We are done. Do not return, instead branch to second part of board
191 * initialization, now running from RAM.
192 */
193call_board_init_r:
194	la t0, board_init_r
195	mv t4, t0			/* offset of board_init_r() */
196	add t4, t4, t6			/* real address of board_init_r() */
197/*
198 * setup parameters for board_init_r
199 */
200	mv a0, s3			/* gd_t */
201	mv a1, s4			/* dest_addr */
202
203/*
204 * jump to it ...
205 */
206	jr t4				/* jump to board_init_r() */
207
208/*
209 * trap entry
210 */
211trap_entry:
212	addi sp, sp, -32*REGBYTES
213	SREG x1, 1*REGBYTES(sp)
214	SREG x2, 2*REGBYTES(sp)
215	SREG x3, 3*REGBYTES(sp)
216	SREG x4, 4*REGBYTES(sp)
217	SREG x5, 5*REGBYTES(sp)
218	SREG x6, 6*REGBYTES(sp)
219	SREG x7, 7*REGBYTES(sp)
220	SREG x8, 8*REGBYTES(sp)
221	SREG x9, 9*REGBYTES(sp)
222	SREG x10, 10*REGBYTES(sp)
223	SREG x11, 11*REGBYTES(sp)
224	SREG x12, 12*REGBYTES(sp)
225	SREG x13, 13*REGBYTES(sp)
226	SREG x14, 14*REGBYTES(sp)
227	SREG x15, 15*REGBYTES(sp)
228	SREG x16, 16*REGBYTES(sp)
229	SREG x17, 17*REGBYTES(sp)
230	SREG x18, 18*REGBYTES(sp)
231	SREG x19, 19*REGBYTES(sp)
232	SREG x20, 20*REGBYTES(sp)
233	SREG x21, 21*REGBYTES(sp)
234	SREG x22, 22*REGBYTES(sp)
235	SREG x23, 23*REGBYTES(sp)
236	SREG x24, 24*REGBYTES(sp)
237	SREG x25, 25*REGBYTES(sp)
238	SREG x26, 26*REGBYTES(sp)
239	SREG x27, 27*REGBYTES(sp)
240	SREG x28, 28*REGBYTES(sp)
241	SREG x29, 29*REGBYTES(sp)
242	SREG x30, 30*REGBYTES(sp)
243	SREG x31, 31*REGBYTES(sp)
244	csrr a0, mcause
245	csrr a1, mepc
246	mv a2, sp
247	jal handle_trap
248	csrw mepc, a0
249
250/*
251 * Remain in M-mode after mret
252 */
253	li t0, MSTATUS_MPP
254	csrs mstatus, t0
255	LREG x1, 1*REGBYTES(sp)
256	LREG x2, 2*REGBYTES(sp)
257	LREG x3, 3*REGBYTES(sp)
258	LREG x4, 4*REGBYTES(sp)
259	LREG x5, 5*REGBYTES(sp)
260	LREG x6, 6*REGBYTES(sp)
261	LREG x7, 7*REGBYTES(sp)
262	LREG x8, 8*REGBYTES(sp)
263	LREG x9, 9*REGBYTES(sp)
264	LREG x10, 10*REGBYTES(sp)
265	LREG x11, 11*REGBYTES(sp)
266	LREG x12, 12*REGBYTES(sp)
267	LREG x13, 13*REGBYTES(sp)
268	LREG x14, 14*REGBYTES(sp)
269	LREG x15, 15*REGBYTES(sp)
270	LREG x16, 16*REGBYTES(sp)
271	LREG x17, 17*REGBYTES(sp)
272	LREG x18, 18*REGBYTES(sp)
273	LREG x19, 19*REGBYTES(sp)
274	LREG x20, 20*REGBYTES(sp)
275	LREG x21, 21*REGBYTES(sp)
276	LREG x22, 22*REGBYTES(sp)
277	LREG x23, 23*REGBYTES(sp)
278	LREG x24, 24*REGBYTES(sp)
279	LREG x25, 25*REGBYTES(sp)
280	LREG x26, 26*REGBYTES(sp)
281	LREG x27, 27*REGBYTES(sp)
282	LREG x28, 28*REGBYTES(sp)
283	LREG x29, 29*REGBYTES(sp)
284	LREG x30, 30*REGBYTES(sp)
285	LREG x31, 31*REGBYTES(sp)
286	addi sp, sp, 32*REGBYTES
287	mret
288
289#ifdef CONFIG_INIT_CRITICAL
290cpu_init_crit:
291    ret
292#endif
293