1 /* originally from linux source. 2 * removed the dependencies on CONFIG_ values 3 * removed virt_to_phys stuff (and in fact everything surrounded by #if __KERNEL__) 4 * Modified By Rob Taylor, Flying Pig Systems, 2000 5 */ 6 7 #ifndef _PPC_IO_H 8 #define _PPC_IO_H 9 10 #include <linux/config.h> 11 #include <asm/byteorder.h> 12 13 #ifdef CONFIG_ADDR_MAP 14 #include <addr_map.h> 15 #endif 16 17 #define SIO_CONFIG_RA 0x398 18 #define SIO_CONFIG_RD 0x399 19 20 #ifndef _IO_BASE 21 #define _IO_BASE 0 22 #endif 23 24 #define readb(addr) in_8((volatile u8 *)(addr)) 25 #define writeb(b,addr) out_8((volatile u8 *)(addr), (b)) 26 #if !defined(__BIG_ENDIAN) 27 #define readw(addr) (*(volatile u16 *) (addr)) 28 #define readl(addr) (*(volatile u32 *) (addr)) 29 #define writew(b,addr) ((*(volatile u16 *) (addr)) = (b)) 30 #define writel(b,addr) ((*(volatile u32 *) (addr)) = (b)) 31 #else 32 #define readw(addr) in_le16((volatile u16 *)(addr)) 33 #define readl(addr) in_le32((volatile u32 *)(addr)) 34 #define writew(b,addr) out_le16((volatile u16 *)(addr),(b)) 35 #define writel(b,addr) out_le32((volatile u32 *)(addr),(b)) 36 #endif 37 38 /* 39 * The insw/outsw/insl/outsl macros don't do byte-swapping. 40 * They are only used in practice for transferring buffers which 41 * are arrays of bytes, and byte-swapping is not appropriate in 42 * that case. - paulus 43 */ 44 #define insb(port, buf, ns) _insb((u8 *)((port)+_IO_BASE), (buf), (ns)) 45 #define outsb(port, buf, ns) _outsb((u8 *)((port)+_IO_BASE), (buf), (ns)) 46 #define insw(port, buf, ns) _insw_ns((u16 *)((port)+_IO_BASE), (buf), (ns)) 47 #define outsw(port, buf, ns) _outsw_ns((u16 *)((port)+_IO_BASE), (buf), (ns)) 48 #define insl(port, buf, nl) _insl_ns((u32 *)((port)+_IO_BASE), (buf), (nl)) 49 #define outsl(port, buf, nl) _outsl_ns((u32 *)((port)+_IO_BASE), (buf), (nl)) 50 51 #define inb(port) in_8((u8 *)((port)+_IO_BASE)) 52 #define outb(val, port) out_8((u8 *)((port)+_IO_BASE), (val)) 53 #if !defined(__BIG_ENDIAN) 54 #define inw(port) in_be16((u16 *)((port)+_IO_BASE)) 55 #define outw(val, port) out_be16((u16 *)((port)+_IO_BASE), (val)) 56 #define inl(port) in_be32((u32 *)((port)+_IO_BASE)) 57 #define outl(val, port) out_be32((u32 *)((port)+_IO_BASE), (val)) 58 #else 59 #define inw(port) in_le16((u16 *)((port)+_IO_BASE)) 60 #define outw(val, port) out_le16((u16 *)((port)+_IO_BASE), (val)) 61 #define inl(port) in_le32((u32 *)((port)+_IO_BASE)) 62 #define outl(val, port) out_le32((u32 *)((port)+_IO_BASE), (val)) 63 #endif 64 65 #define inb_p(port) in_8((u8 *)((port)+_IO_BASE)) 66 #define outb_p(val, port) out_8((u8 *)((port)+_IO_BASE), (val)) 67 #define inw_p(port) in_le16((u16 *)((port)+_IO_BASE)) 68 #define outw_p(val, port) out_le16((u16 *)((port)+_IO_BASE), (val)) 69 #define inl_p(port) in_le32((u32 *)((port)+_IO_BASE)) 70 #define outl_p(val, port) out_le32((u32 *)((port)+_IO_BASE), (val)) 71 72 extern void _insb(volatile u8 *port, void *buf, int ns); 73 extern void _outsb(volatile u8 *port, const void *buf, int ns); 74 extern void _insw(volatile u16 *port, void *buf, int ns); 75 extern void _outsw(volatile u16 *port, const void *buf, int ns); 76 extern void _insl(volatile u32 *port, void *buf, int nl); 77 extern void _outsl(volatile u32 *port, const void *buf, int nl); 78 extern void _insw_ns(volatile u16 *port, void *buf, int ns); 79 extern void _outsw_ns(volatile u16 *port, const void *buf, int ns); 80 extern void _insl_ns(volatile u32 *port, void *buf, int nl); 81 extern void _outsl_ns(volatile u32 *port, const void *buf, int nl); 82 83 /* 84 * The *_ns versions below don't do byte-swapping. 85 * Neither do the standard versions now, these are just here 86 * for older code. 87 */ 88 #define insw_ns(port, buf, ns) _insw_ns((u16 *)((port)+_IO_BASE), (buf), (ns)) 89 #define outsw_ns(port, buf, ns) _outsw_ns((u16 *)((port)+_IO_BASE), (buf), (ns)) 90 #define insl_ns(port, buf, nl) _insl_ns((u32 *)((port)+_IO_BASE), (buf), (nl)) 91 #define outsl_ns(port, buf, nl) _outsl_ns((u32 *)((port)+_IO_BASE), (buf), (nl)) 92 93 94 #define IO_SPACE_LIMIT ~0 95 96 #define memset_io(a,b,c) memset((void *)(a),(b),(c)) 97 #define memcpy_fromio(a,b,c) memcpy((a),(void *)(b),(c)) 98 #define memcpy_toio(a,b,c) memcpy((void *)(a),(b),(c)) 99 100 /* 101 * Enforce In-order Execution of I/O: 102 * Acts as a barrier to ensure all previous I/O accesses have 103 * completed before any further ones are issued. 104 */ 105 static inline void eieio(void) 106 { 107 __asm__ __volatile__ ("eieio" : : : "memory"); 108 } 109 110 static inline void sync(void) 111 { 112 __asm__ __volatile__ ("sync" : : : "memory"); 113 } 114 115 static inline void isync(void) 116 { 117 __asm__ __volatile__ ("isync" : : : "memory"); 118 } 119 120 /* Enforce in-order execution of data I/O. 121 * No distinction between read/write on PPC; use eieio for all three. 122 */ 123 #define iobarrier_rw() eieio() 124 #define iobarrier_r() eieio() 125 #define iobarrier_w() eieio() 126 127 /* 128 * Non ordered and non-swapping "raw" accessors 129 */ 130 #define PCI_FIX_ADDR(addr) (addr) 131 132 static inline unsigned char __raw_readb(const volatile void __iomem *addr) 133 { 134 return *(volatile unsigned char *)PCI_FIX_ADDR(addr); 135 } 136 static inline unsigned short __raw_readw(const volatile void __iomem *addr) 137 { 138 return *(volatile unsigned short *)PCI_FIX_ADDR(addr); 139 } 140 static inline unsigned int __raw_readl(const volatile void __iomem *addr) 141 { 142 return *(volatile unsigned int *)PCI_FIX_ADDR(addr); 143 } 144 static inline void __raw_writeb(unsigned char v, volatile void __iomem *addr) 145 { 146 *(volatile unsigned char *)PCI_FIX_ADDR(addr) = v; 147 } 148 static inline void __raw_writew(unsigned short v, volatile void __iomem *addr) 149 { 150 *(volatile unsigned short *)PCI_FIX_ADDR(addr) = v; 151 } 152 static inline void __raw_writel(unsigned int v, volatile void __iomem *addr) 153 { 154 *(volatile unsigned int *)PCI_FIX_ADDR(addr) = v; 155 } 156 157 /* 158 * 8, 16 and 32 bit, big and little endian I/O operations, with barrier. 159 * 160 * Read operations have additional twi & isync to make sure the read 161 * is actually performed (i.e. the data has come back) before we start 162 * executing any following instructions. 163 */ 164 extern inline u8 in_8(const volatile unsigned char __iomem *addr) 165 { 166 u8 ret; 167 168 __asm__ __volatile__( 169 "sync; lbz%U1%X1 %0,%1;\n" 170 "twi 0,%0,0;\n" 171 "isync" : "=r" (ret) : "m" (*addr)); 172 return ret; 173 } 174 175 extern inline void out_8(volatile unsigned char __iomem *addr, u8 val) 176 { 177 __asm__ __volatile__("sync;\n" 178 "stb%U0%X0 %1,%0;\n" 179 : "=m" (*addr) 180 : "r" (val)); 181 } 182 183 extern inline u16 in_le16(const volatile unsigned short __iomem *addr) 184 { 185 u16 ret; 186 187 __asm__ __volatile__("sync; lhbrx %0,0,%1;\n" 188 "twi 0,%0,0;\n" 189 "isync" : "=r" (ret) : 190 "r" (addr), "m" (*addr)); 191 return ret; 192 } 193 194 extern inline u16 in_be16(const volatile unsigned short __iomem *addr) 195 { 196 u16 ret; 197 198 __asm__ __volatile__("sync; lhz%U1%X1 %0,%1;\n" 199 "twi 0,%0,0;\n" 200 "isync" : "=r" (ret) : "m" (*addr)); 201 return ret; 202 } 203 204 extern inline void out_le16(volatile unsigned short __iomem *addr, u16 val) 205 { 206 __asm__ __volatile__("sync; sthbrx %1,0,%2" : "=m" (*addr) : 207 "r" (val), "r" (addr)); 208 } 209 210 extern inline void out_be16(volatile unsigned short __iomem *addr, u16 val) 211 { 212 __asm__ __volatile__("sync; sth%U0%X0 %1,%0" : "=m" (*addr) : "r" (val)); 213 } 214 215 extern inline u32 in_le32(const volatile unsigned __iomem *addr) 216 { 217 u32 ret; 218 219 __asm__ __volatile__("sync; lwbrx %0,0,%1;\n" 220 "twi 0,%0,0;\n" 221 "isync" : "=r" (ret) : 222 "r" (addr), "m" (*addr)); 223 return ret; 224 } 225 226 extern inline u32 in_be32(const volatile unsigned __iomem *addr) 227 { 228 u32 ret; 229 230 __asm__ __volatile__("sync; lwz%U1%X1 %0,%1;\n" 231 "twi 0,%0,0;\n" 232 "isync" : "=r" (ret) : "m" (*addr)); 233 return ret; 234 } 235 236 extern inline void out_le32(volatile unsigned __iomem *addr, u32 val) 237 { 238 __asm__ __volatile__("sync; stwbrx %1,0,%2" : "=m" (*addr) : 239 "r" (val), "r" (addr)); 240 } 241 242 extern inline void out_be32(volatile unsigned __iomem *addr, u32 val) 243 { 244 __asm__ __volatile__("sync; stw%U0%X0 %1,%0" : "=m" (*addr) : "r" (val)); 245 } 246 247 /* Clear and set bits in one shot. These macros can be used to clear and 248 * set multiple bits in a register using a single call. These macros can 249 * also be used to set a multiple-bit bit pattern using a mask, by 250 * specifying the mask in the 'clear' parameter and the new bit pattern 251 * in the 'set' parameter. 252 */ 253 254 #define clrbits(type, addr, clear) \ 255 out_##type((addr), in_##type(addr) & ~(clear)) 256 257 #define setbits(type, addr, set) \ 258 out_##type((addr), in_##type(addr) | (set)) 259 260 #define clrsetbits(type, addr, clear, set) \ 261 out_##type((addr), (in_##type(addr) & ~(clear)) | (set)) 262 263 #define clrbits_be32(addr, clear) clrbits(be32, addr, clear) 264 #define setbits_be32(addr, set) setbits(be32, addr, set) 265 #define clrsetbits_be32(addr, clear, set) clrsetbits(be32, addr, clear, set) 266 267 #define clrbits_le32(addr, clear) clrbits(le32, addr, clear) 268 #define setbits_le32(addr, set) setbits(le32, addr, set) 269 #define clrsetbits_le32(addr, clear, set) clrsetbits(le32, addr, clear, set) 270 271 #define clrbits_be16(addr, clear) clrbits(be16, addr, clear) 272 #define setbits_be16(addr, set) setbits(be16, addr, set) 273 #define clrsetbits_be16(addr, clear, set) clrsetbits(be16, addr, clear, set) 274 275 #define clrbits_le16(addr, clear) clrbits(le16, addr, clear) 276 #define setbits_le16(addr, set) setbits(le16, addr, set) 277 #define clrsetbits_le16(addr, clear, set) clrsetbits(le16, addr, clear, set) 278 279 #define clrbits_8(addr, clear) clrbits(8, addr, clear) 280 #define setbits_8(addr, set) setbits(8, addr, set) 281 #define clrsetbits_8(addr, clear, set) clrsetbits(8, addr, clear, set) 282 283 /* 284 * Given a physical address and a length, return a virtual address 285 * that can be used to access the memory range with the caching 286 * properties specified by "flags". 287 */ 288 #define MAP_NOCACHE (0) 289 #define MAP_WRCOMBINE (0) 290 #define MAP_WRBACK (0) 291 #define MAP_WRTHROUGH (0) 292 293 static inline void * 294 map_physmem(phys_addr_t paddr, unsigned long len, unsigned long flags) 295 { 296 #ifdef CONFIG_ADDR_MAP 297 return addrmap_phys_to_virt(paddr); 298 #else 299 return (void *)((unsigned long)paddr); 300 #endif 301 } 302 303 /* 304 * Take down a mapping set up by map_physmem(). 305 */ 306 static inline void unmap_physmem(void *vaddr, unsigned long flags) 307 { 308 309 } 310 311 static inline phys_addr_t virt_to_phys(void * vaddr) 312 { 313 #ifdef CONFIG_ADDR_MAP 314 return addrmap_virt_to_phys(vaddr); 315 #else 316 return (phys_addr_t)((unsigned long)vaddr); 317 #endif 318 } 319 320 #endif 321