1 /* 2 * Copyright 2009-2010 Freescale Semiconductor, Inc. 3 * 4 * This program is free software; you can redistribute it and/or 5 * modify it under the terms of the GNU General Public License as 6 * published by the Free Software Foundation; either version 2 of 7 * the License, or (at your option) any later version. 8 * 9 * This program is distributed in the hope that it will be useful, 10 * but WITHOUT ANY WARRANTY; without even the implied warranty of 11 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 12 * GNU General Public License for more details. 13 * 14 * You should have received a copy of the GNU General Public License 15 * along with this program; if not, write to the Free Software 16 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 17 * MA 02111-1307 USA 18 * 19 */ 20 21 #ifndef _ASM_CONFIG_H_ 22 #define _ASM_CONFIG_H_ 23 24 #define CONFIG_LMB 25 26 #ifndef CONFIG_MAX_MEM_MAPPED 27 #if defined(CONFIG_4xx) || defined(CONFIG_E500) || defined(CONFIG_MPC86xx) 28 #define CONFIG_MAX_MEM_MAPPED ((phys_size_t)2 << 30) 29 #else 30 #define CONFIG_MAX_MEM_MAPPED (256 << 20) 31 #endif 32 #endif 33 34 /* Check if boards need to enable FSL DMA engine for SDRAM init */ 35 #if !defined(CONFIG_FSL_DMA) && defined(CONFIG_DDR_ECC) 36 #if (defined(CONFIG_MPC83xx) && defined(CONFIG_DDR_ECC_INIT_VIA_DMA)) || \ 37 ((defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx)) && \ 38 !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)) 39 #define CONFIG_FSL_DMA 40 #endif 41 #endif 42 43 #if defined(CONFIG_MPC8572) || defined(CONFIG_P1020) || \ 44 defined(CONFIG_P1021) || defined(CONFIG_P1022) || \ 45 defined(CONFIG_P2020) || defined(CONFIG_MPC8641) 46 #define CONFIG_MAX_CPUS 2 47 #elif defined(CONFIG_PPC_P3041) 48 #define CONFIG_MAX_CPUS 4 49 #elif defined(CONFIG_PPC_P4080) 50 #define CONFIG_MAX_CPUS 8 51 #elif defined(CONFIG_PPC_P5020) 52 #define CONFIG_MAX_CPUS 2 53 #else 54 #define CONFIG_MAX_CPUS 1 55 #endif 56 57 /* 58 * Provide a default boot page translation virtual address that lines up with 59 * Freescale's default e500 reset page. 60 */ 61 #if (defined(CONFIG_E500) && defined(CONFIG_MP)) 62 #ifndef CONFIG_BPTR_VIRT_ADDR 63 #define CONFIG_BPTR_VIRT_ADDR 0xfffff000 64 #endif 65 #endif 66 67 /* Enable TSEC2.0 for the platforms that have it if we are using TSEC */ 68 #if defined(CONFIG_TSEC_ENET) && \ 69 (defined(CONFIG_P1020) || defined(CONFIG_P1011)) 70 #define CONFIG_TSECV2 71 #endif 72 73 /* 74 * SEC (crypto unit) major compatible version determination 75 */ 76 #if defined(CONFIG_FSL_CORENET) 77 #define CONFIG_SYS_FSL_SEC_COMPAT 4 78 #elif defined(CONFIG_MPC85xx) || defined(CONFIG_MPC83xx) 79 #define CONFIG_SYS_FSL_SEC_COMPAT 2 80 #endif 81 82 /* Number of TLB CAM entries we have on FSL Book-E chips */ 83 #if defined(CONFIG_E500MC) 84 #define CONFIG_SYS_NUM_TLBCAMS 64 85 #elif defined(CONFIG_E500) 86 #define CONFIG_SYS_NUM_TLBCAMS 16 87 #endif 88 89 /* Relocation to SDRAM works on all PPC boards */ 90 #define CONFIG_RELOC_FIXUP_WORKS 91 92 /* Since so many PPC SOCs have a semi-common LBC, define this here */ 93 #if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx) || \ 94 defined(CONFIG_MPC83xx) 95 #define CONFIG_FSL_LBC 96 #endif 97 98 #endif /* _ASM_CONFIG_H_ */ 99