xref: /openbmc/u-boot/arch/powerpc/cpu/mpc8xxx/law.c (revision 643aae14)
1 /*
2  * Copyright 2008-2011 Freescale Semiconductor, Inc.
3  *
4  * (C) Copyright 2000
5  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
6  *
7  * SPDX-License-Identifier:	GPL-2.0+
8  */
9 
10 #include <common.h>
11 #include <linux/compiler.h>
12 #include <asm/fsl_law.h>
13 #include <asm/io.h>
14 
15 DECLARE_GLOBAL_DATA_PTR;
16 
17 #define FSL_HW_NUM_LAWS CONFIG_SYS_FSL_NUM_LAWS
18 
19 #ifdef CONFIG_FSL_CORENET
20 #define LAW_BASE (CONFIG_SYS_FSL_CORENET_CCM_ADDR)
21 #define LAWAR_ADDR(x) (&((ccsr_local_t *)LAW_BASE)->law[x].lawar)
22 #define LAWBARH_ADDR(x) (&((ccsr_local_t *)LAW_BASE)->law[x].lawbarh)
23 #define LAWBARL_ADDR(x) (&((ccsr_local_t *)LAW_BASE)->law[x].lawbarl)
24 #define LAWBAR_SHIFT 0
25 #else
26 #define LAW_BASE (CONFIG_SYS_IMMR + 0xc08)
27 #define LAWAR_ADDR(x) ((u32 *)LAW_BASE + 8 * x + 2)
28 #define LAWBAR_ADDR(x) ((u32 *)LAW_BASE + 8 * x)
29 #define LAWBAR_SHIFT 12
30 #endif
31 
32 
33 static inline phys_addr_t get_law_base_addr(int idx)
34 {
35 #ifdef CONFIG_FSL_CORENET
36 	return (phys_addr_t)
37 		((u64)in_be32(LAWBARH_ADDR(idx)) << 32) |
38 		in_be32(LAWBARL_ADDR(idx));
39 #else
40 	return (phys_addr_t)in_be32(LAWBAR_ADDR(idx)) << LAWBAR_SHIFT;
41 #endif
42 }
43 
44 static inline void set_law_base_addr(int idx, phys_addr_t addr)
45 {
46 #ifdef CONFIG_FSL_CORENET
47 	out_be32(LAWBARL_ADDR(idx), addr & 0xffffffff);
48 	out_be32(LAWBARH_ADDR(idx), (u64)addr >> 32);
49 #else
50 	out_be32(LAWBAR_ADDR(idx), addr >> LAWBAR_SHIFT);
51 #endif
52 }
53 
54 void set_law(u8 idx, phys_addr_t addr, enum law_size sz, enum law_trgt_if id)
55 {
56 	gd->arch.used_laws |= (1 << idx);
57 
58 	out_be32(LAWAR_ADDR(idx), 0);
59 	set_law_base_addr(idx, addr);
60 	out_be32(LAWAR_ADDR(idx), LAW_EN | ((u32)id << 20) | (u32)sz);
61 
62 	/* Read back so that we sync the writes */
63 	in_be32(LAWAR_ADDR(idx));
64 }
65 
66 void disable_law(u8 idx)
67 {
68 	gd->arch.used_laws &= ~(1 << idx);
69 
70 	out_be32(LAWAR_ADDR(idx), 0);
71 	set_law_base_addr(idx, 0);
72 
73 	/* Read back so that we sync the writes */
74 	in_be32(LAWAR_ADDR(idx));
75 
76 	return;
77 }
78 
79 #if !defined(CONFIG_NAND_SPL) && \
80 	(!defined(CONFIG_SPL_BUILD) || !defined(CONFIG_SPL_INIT_MINIMAL))
81 static int get_law_entry(u8 i, struct law_entry *e)
82 {
83 	u32 lawar;
84 
85 	lawar = in_be32(LAWAR_ADDR(i));
86 
87 	if (!(lawar & LAW_EN))
88 		return 0;
89 
90 	e->addr = get_law_base_addr(i);
91 	e->size = lawar & 0x3f;
92 	e->trgt_id = (lawar >> 20) & 0xff;
93 
94 	return 1;
95 }
96 #endif
97 
98 int set_next_law(phys_addr_t addr, enum law_size sz, enum law_trgt_if id)
99 {
100 	u32 idx = ffz(gd->arch.used_laws);
101 
102 	if (idx >= FSL_HW_NUM_LAWS)
103 		return -1;
104 
105 	set_law(idx, addr, sz, id);
106 
107 	return idx;
108 }
109 
110 #if !defined(CONFIG_NAND_SPL) && \
111 	(!defined(CONFIG_SPL_BUILD) || !defined(CONFIG_SPL_INIT_MINIMAL))
112 int set_last_law(phys_addr_t addr, enum law_size sz, enum law_trgt_if id)
113 {
114 	u32 idx;
115 
116 	/* we have no LAWs free */
117 	if (gd->arch.used_laws == -1)
118 		return -1;
119 
120 	/* grab the last free law */
121 	idx = __ilog2(~(gd->arch.used_laws));
122 
123 	if (idx >= FSL_HW_NUM_LAWS)
124 		return -1;
125 
126 	set_law(idx, addr, sz, id);
127 
128 	return idx;
129 }
130 
131 struct law_entry find_law(phys_addr_t addr)
132 {
133 	struct law_entry entry;
134 	int i;
135 
136 	entry.index = -1;
137 	entry.addr = 0;
138 	entry.size = 0;
139 	entry.trgt_id = 0;
140 
141 	for (i = 0; i < FSL_HW_NUM_LAWS; i++) {
142 		u64 upper;
143 
144 		if (!get_law_entry(i, &entry))
145 			continue;
146 
147 		upper = entry.addr + (2ull << entry.size);
148 		if ((addr >= entry.addr) && (addr < upper)) {
149 			entry.index = i;
150 			break;
151 		}
152 	}
153 
154 	return entry;
155 }
156 
157 void print_laws(void)
158 {
159 	int i;
160 	u32 lawar;
161 
162 	printf("\nLocal Access Window Configuration\n");
163 	for (i = 0; i < FSL_HW_NUM_LAWS; i++) {
164 		lawar = in_be32(LAWAR_ADDR(i));
165 #ifdef CONFIG_FSL_CORENET
166 		printf("LAWBARH%02d: 0x%08x LAWBARL%02d: 0x%08x",
167 		       i, in_be32(LAWBARH_ADDR(i)),
168 		       i, in_be32(LAWBARL_ADDR(i)));
169 #else
170 		printf("LAWBAR%02d: 0x%08x", i, in_be32(LAWBAR_ADDR(i)));
171 #endif
172 		printf(" LAWAR%02d: 0x%08x\n", i, lawar);
173 		printf("\t(EN: %d TGT: 0x%02x SIZE: ",
174 		       (lawar & LAW_EN) ? 1 : 0, (lawar >> 20) & 0xff);
175 		print_size(lawar_size(lawar), ")\n");
176 	}
177 
178 	return;
179 }
180 
181 /* use up to 2 LAWs for DDR, used the last available LAWs */
182 int set_ddr_laws(u64 start, u64 sz, enum law_trgt_if id)
183 {
184 	u64 start_align, law_sz;
185 	int law_sz_enc;
186 
187 	if (start == 0)
188 		start_align = 1ull << (LAW_SIZE_32G + 1);
189 	else
190 		start_align = 1ull << (ffs64(start) - 1);
191 	law_sz = min(start_align, sz);
192 	law_sz_enc = __ilog2_u64(law_sz) - 1;
193 
194 	if (set_last_law(start, law_sz_enc, id) < 0)
195 		return -1;
196 
197 	/* recalculate size based on what was actually covered by the law */
198 	law_sz = 1ull << __ilog2_u64(law_sz);
199 
200 	/* do we still have anything to map */
201 	sz = sz - law_sz;
202 	if (sz) {
203 		start += law_sz;
204 
205 		start_align = 1ull << (ffs64(start) - 1);
206 		law_sz = min(start_align, sz);
207 		law_sz_enc = __ilog2_u64(law_sz) - 1;
208 
209 		if (set_last_law(start, law_sz_enc, id) < 0)
210 			return -1;
211 	} else {
212 		return 0;
213 	}
214 
215 	/* do we still have anything to map */
216 	sz = sz - law_sz;
217 	if (sz)
218 		return 1;
219 
220 	return 0;
221 }
222 #endif /* not SPL */
223 
224 void init_laws(void)
225 {
226 	int i;
227 
228 #if FSL_HW_NUM_LAWS < 32
229 	gd->arch.used_laws = ~((1 << FSL_HW_NUM_LAWS) - 1);
230 #elif FSL_HW_NUM_LAWS == 32
231 	gd->arch.used_laws = 0;
232 #else
233 #error FSL_HW_NUM_LAWS can not be greater than 32 w/o code changes
234 #endif
235 
236 	/*
237 	 * Any LAWs that were set up before we booted assume they are meant to
238 	 * be around and mark them used.
239 	 */
240 	for (i = 0; i < FSL_HW_NUM_LAWS; i++) {
241 		u32 lawar = in_be32(LAWAR_ADDR(i));
242 
243 		if (lawar & LAW_EN)
244 			gd->arch.used_laws |= (1 << i);
245 	}
246 
247 #if (defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)) || \
248 	(defined(CONFIG_SPL) && !defined(CONFIG_SPL_BUILD))
249 	/*
250 	 * in SPL boot we've already parsed the law_table and setup those LAWs
251 	 * so don't do it again.
252 	 */
253 	return;
254 #endif
255 
256 	for (i = 0; i < num_law_entries; i++) {
257 		if (law_table[i].index == -1)
258 			set_next_law(law_table[i].addr, law_table[i].size,
259 					law_table[i].trgt_id);
260 		else
261 			set_law(law_table[i].index, law_table[i].addr,
262 				law_table[i].size, law_table[i].trgt_id);
263 	}
264 
265 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
266 	/* check RCW to get which port is used for boot */
267 	ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
268 	u32 bootloc = in_be32(&gur->rcwsr[6]);
269 	/*
270 	 * in SRIO or PCIE boot we need to set specail LAWs for
271 	 * SRIO or PCIE interfaces.
272 	 */
273 	switch ((bootloc & FSL_CORENET_RCWSR6_BOOT_LOC) >> 23) {
274 	case 0x0: /* boot from PCIE1 */
275 		set_next_law(CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS,
276 				LAW_SIZE_1M,
277 				LAW_TRGT_IF_PCIE_1);
278 		set_next_law(CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS,
279 				LAW_SIZE_1M,
280 				LAW_TRGT_IF_PCIE_1);
281 		break;
282 	case 0x1: /* boot from PCIE2 */
283 		set_next_law(CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS,
284 				LAW_SIZE_1M,
285 				LAW_TRGT_IF_PCIE_2);
286 		set_next_law(CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS,
287 				LAW_SIZE_1M,
288 				LAW_TRGT_IF_PCIE_2);
289 		break;
290 	case 0x2: /* boot from PCIE3 */
291 		set_next_law(CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS,
292 				LAW_SIZE_1M,
293 				LAW_TRGT_IF_PCIE_3);
294 		set_next_law(CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS,
295 				LAW_SIZE_1M,
296 				LAW_TRGT_IF_PCIE_3);
297 		break;
298 	case 0x8: /* boot from SRIO1 */
299 		set_next_law(CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS,
300 				LAW_SIZE_1M,
301 				LAW_TRGT_IF_RIO_1);
302 		set_next_law(CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS,
303 				LAW_SIZE_1M,
304 				LAW_TRGT_IF_RIO_1);
305 		break;
306 	case 0x9: /* boot from SRIO2 */
307 		set_next_law(CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS,
308 				LAW_SIZE_1M,
309 				LAW_TRGT_IF_RIO_2);
310 		set_next_law(CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS,
311 				LAW_SIZE_1M,
312 				LAW_TRGT_IF_RIO_2);
313 		break;
314 	default:
315 		break;
316 	}
317 #endif
318 
319 	return ;
320 }
321