1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * Copyright 2010-2011 Freescale Semiconductor, Inc. 4 */ 5 6 #include <common.h> 7 #include <asm/fsl_lbc.h> 8 9 #ifdef CONFIG_MPC85xx 10 /* Boards should provide their own version of this if they use lbc sdram */ 11 static void __lbc_sdram_init(void) 12 { 13 /* Do nothing */ 14 } 15 void lbc_sdram_init(void) __attribute__((weak, alias("__lbc_sdram_init"))); 16 #endif 17 18 19 void print_lbc_regs(void) 20 { 21 int i; 22 23 printf("\nLocal Bus Controller Registers\n"); 24 for (i = 0; i < 8; i++) { 25 printf("BR%d\t0x%08X\tOR%d\t0x%08X\n", 26 i, get_lbc_br(i), i, get_lbc_or(i)); 27 } 28 printf("LBCR\t0x%08X\tLCRR\t0x%08X\n", 29 get_lbc_lbcr(), get_lbc_lcrr()); 30 } 31 32 void init_early_memctl_regs(void) 33 { 34 uint init_br1 = 1; 35 36 #ifdef CONFIG_SYS_FSL_ERRATUM_ELBC_A001 37 /* Set the local bus monitor timeout value to the maximum */ 38 clrsetbits_be32(&(LBC_BASE_ADDR)->lbcr, LBCR_BMT|LBCR_BMTPS, 0xf); 39 #endif 40 41 #ifdef CONFIG_MPC85xx 42 /* if cs1 is already set via debugger, leave cs0/cs1 alone */ 43 if (get_lbc_br(1) & BR_V) 44 init_br1 = 0; 45 #endif 46 47 /* 48 * Map banks 0 (and maybe 1) to the FLASH banks 0 (and 1) at 49 * preliminary addresses - these have to be modified later 50 * when FLASH size has been determined 51 */ 52 #if defined(CONFIG_SYS_OR0_REMAP) 53 set_lbc_or(0, CONFIG_SYS_OR0_REMAP); 54 #endif 55 #if defined(CONFIG_SYS_OR1_REMAP) 56 set_lbc_or(1, CONFIG_SYS_OR1_REMAP); 57 #endif 58 /* now restrict to preliminary range */ 59 if (init_br1) { 60 #if defined(CONFIG_SYS_BR0_PRELIM) && defined(CONFIG_SYS_OR0_PRELIM) 61 set_lbc_br(0, CONFIG_SYS_BR0_PRELIM); 62 set_lbc_or(0, CONFIG_SYS_OR0_PRELIM); 63 #endif 64 65 #if defined(CONFIG_SYS_BR1_PRELIM) && defined(CONFIG_SYS_OR1_PRELIM) 66 set_lbc_or(1, CONFIG_SYS_OR1_PRELIM); 67 set_lbc_br(1, CONFIG_SYS_BR1_PRELIM); 68 #endif 69 } 70 71 #if defined(CONFIG_SYS_BR2_PRELIM) && defined(CONFIG_SYS_OR2_PRELIM) 72 set_lbc_or(2, CONFIG_SYS_OR2_PRELIM); 73 set_lbc_br(2, CONFIG_SYS_BR2_PRELIM); 74 #endif 75 76 #if defined(CONFIG_SYS_BR3_PRELIM) && defined(CONFIG_SYS_OR3_PRELIM) 77 set_lbc_or(3, CONFIG_SYS_OR3_PRELIM); 78 set_lbc_br(3, CONFIG_SYS_BR3_PRELIM); 79 #endif 80 81 #if defined(CONFIG_SYS_BR4_PRELIM) && defined(CONFIG_SYS_OR4_PRELIM) 82 set_lbc_or(4, CONFIG_SYS_OR4_PRELIM); 83 set_lbc_br(4, CONFIG_SYS_BR4_PRELIM); 84 #endif 85 86 #if defined(CONFIG_SYS_BR5_PRELIM) && defined(CONFIG_SYS_OR5_PRELIM) 87 set_lbc_or(5, CONFIG_SYS_OR5_PRELIM); 88 set_lbc_br(5, CONFIG_SYS_BR5_PRELIM); 89 #endif 90 91 #if defined(CONFIG_SYS_BR6_PRELIM) && defined(CONFIG_SYS_OR6_PRELIM) 92 set_lbc_or(6, CONFIG_SYS_OR6_PRELIM); 93 set_lbc_br(6, CONFIG_SYS_BR6_PRELIM); 94 #endif 95 96 #if defined(CONFIG_SYS_BR7_PRELIM) && defined(CONFIG_SYS_OR7_PRELIM) 97 set_lbc_or(7, CONFIG_SYS_OR7_PRELIM); 98 set_lbc_br(7, CONFIG_SYS_BR7_PRELIM); 99 #endif 100 } 101 102 /* 103 * Configures a UPM. The function requires the respective MxMR to be set 104 * before calling this function. "size" is the number or entries, not a sizeof. 105 */ 106 void upmconfig(uint upm, uint *table, uint size) 107 { 108 fsl_lbc_t *lbc = LBC_BASE_ADDR; 109 int i, mad, old_mad = 0; 110 u32 mask = (~MxMR_OP_MSK & ~MxMR_MAD_MSK); 111 u32 msel = BR_UPMx_TO_MSEL(upm); 112 u32 *mxmr = &lbc->mamr + upm; 113 volatile u8 *dummy = NULL; 114 115 if (upm < UPMA || upm > UPMC) { 116 printf("Error: %s() Bad UPM index %d\n", __func__, upm); 117 hang(); 118 } 119 120 /* 121 * Find the address for the dummy write - scan all of the BRs until we 122 * find one matching the UPM and extract the base address bits from it. 123 */ 124 for (i = 0; i < 8; i++) { 125 if ((get_lbc_br(i) & (BR_V | BR_MSEL)) == (BR_V | msel)) { 126 dummy = (volatile u8 *)(get_lbc_br(i) & BR_BA); 127 break; 128 } 129 } 130 131 if (!dummy) { 132 printf("Error: %s() No matching BR\n", __func__); 133 hang(); 134 } 135 136 /* Program UPM using steps outlined by the reference manual */ 137 for (i = 0; i < size; i++) { 138 out_be32(mxmr, (in_be32(mxmr) & mask) | MxMR_OP_WARR | i); 139 out_be32(&lbc->mdr, table[i]); 140 (void)in_be32(&lbc->mdr); 141 *dummy = 0; 142 do { 143 mad = in_be32(mxmr) & MxMR_MAD_MSK; 144 } while (mad <= old_mad && !(!mad && i == (size-1))); 145 old_mad = mad; 146 } 147 148 /* Return to normal operation */ 149 out_be32(mxmr, (in_be32(mxmr) & mask) | MxMR_OP_NORM); 150 } 151