xref: /openbmc/u-boot/arch/powerpc/cpu/mpc8xx/start.S (revision 8343f8a7) 
1/*
2 *  Copyright (C) 1998	Dan Malek <dmalek@jlc.net>
3 *  Copyright (C) 1999	Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
4 *  Copyright (C) 2000,2001,2002 Wolfgang Denk <wd@denx.de>
5 *
6 * See file CREDITS for list of people who contributed to this
7 * project.
8 *
9 * This program is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License as
11 * published by the Free Software Foundation; either version 2 of
12 * the License, or (at your option) any later version.
13 *
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
17 * GNU General Public License for more details.
18 *
19 * You should have received a copy of the GNU General Public License
20 * along with this program; if not, write to the Free Software
21 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
22 * MA 02111-1307 USA
23 */
24
25/*  U-Boot - Startup Code for PowerPC based Embedded Boards
26 *
27 *
28 *  The processor starts at 0x00000100 and the code is executed
29 *  from flash. The code is organized to be at an other address
30 *  in memory, but as long we don't jump around before relocating,
31 *  board_init lies at a quite high address and when the cpu has
32 *  jumped there, everything is ok.
33 *  This works because the cpu gives the FLASH (CS0) the whole
34 *  address space at startup, and board_init lies as a echo of
35 *  the flash somewhere up there in the memory map.
36 *
37 *  board_init will change CS0 to be positioned at the correct
38 *  address and (s)dram will be positioned at address 0
39 */
40#include <asm-offsets.h>
41#include <config.h>
42#include <mpc8xx.h>
43#include <timestamp.h>
44#include <version.h>
45
46#define CONFIG_8xx 1		/* needed for Linux kernel header files */
47#define _LINUX_CONFIG_H 1	/* avoid reading Linux autoconf.h file	*/
48
49#include <ppc_asm.tmpl>
50#include <ppc_defs.h>
51
52#include <asm/cache.h>
53#include <asm/mmu.h>
54#include <asm/u-boot.h>
55
56#ifndef  CONFIG_IDENT_STRING
57#define  CONFIG_IDENT_STRING ""
58#endif
59
60/* We don't want the  MMU yet.
61*/
62#undef	MSR_KERNEL
63#define MSR_KERNEL ( MSR_ME | MSR_RI )	/* Machine Check and Recoverable Interr. */
64
65/*
66 * Set up GOT: Global Offset Table
67 *
68 * Use r12 to access the GOT
69 */
70	START_GOT
71	GOT_ENTRY(_GOT2_TABLE_)
72	GOT_ENTRY(_FIXUP_TABLE_)
73
74	GOT_ENTRY(_start)
75	GOT_ENTRY(_start_of_vectors)
76	GOT_ENTRY(_end_of_vectors)
77	GOT_ENTRY(transfer_to_handler)
78
79	GOT_ENTRY(__init_end)
80	GOT_ENTRY(_end)
81	GOT_ENTRY(__bss_start)
82	END_GOT
83
84/*
85 * r3 - 1st arg to board_init(): IMMP pointer
86 * r4 - 2nd arg to board_init(): boot flag
87 */
88	.text
89	.long	0x27051956		/* U-Boot Magic Number			*/
90	.globl	version_string
91version_string:
92	.ascii U_BOOT_VERSION
93	.ascii " (", U_BOOT_DATE, " - ", U_BOOT_TIME, ")"
94	.ascii CONFIG_IDENT_STRING, "\0"
95
96	. = EXC_OFF_SYS_RESET
97	.globl	_start
98_start:
99	lis	r3, CONFIG_SYS_IMMR@h		/* position IMMR */
100	mtspr	638, r3
101
102	/* Initialize machine status; enable machine check interrupt		*/
103	/*----------------------------------------------------------------------*/
104	li	r3, MSR_KERNEL		/* Set ME, RI flags */
105	mtmsr	r3
106	mtspr	SRR1, r3		/* Make SRR1 match MSR */
107
108	mfspr	r3, ICR			/* clear Interrupt Cause Register */
109
110	/* Initialize debug port registers					*/
111	/*----------------------------------------------------------------------*/
112	xor	r0, r0, r0		/* Clear R0 */
113	mtspr	LCTRL1, r0		/* Initialize debug port regs */
114	mtspr	LCTRL2, r0
115	mtspr	COUNTA, r0
116	mtspr	COUNTB, r0
117
118	/* Reset the caches							*/
119	/*----------------------------------------------------------------------*/
120
121	mfspr	r3, IC_CST		/* Clear error bits */
122	mfspr	r3, DC_CST
123
124	lis	r3, IDC_UNALL@h		/* Unlock all */
125	mtspr	IC_CST, r3
126	mtspr	DC_CST, r3
127
128	lis	r3, IDC_INVALL@h	/* Invalidate all */
129	mtspr	IC_CST, r3
130	mtspr	DC_CST, r3
131
132	lis	r3, IDC_DISABLE@h	/* Disable data cache */
133	mtspr	DC_CST, r3
134
135#if !defined(CONFIG_SYS_DELAYED_ICACHE)
136					/* On IP860 and PCU E,
137					 * we cannot enable IC yet
138					 */
139	lis	r3, IDC_ENABLE@h	/* Enable instruction cache */
140#endif
141	mtspr	IC_CST, r3
142
143	/* invalidate all tlb's							*/
144	/*----------------------------------------------------------------------*/
145
146	tlbia
147	isync
148
149	/*
150	 * Calculate absolute address in FLASH and jump there
151	 *----------------------------------------------------------------------*/
152
153	lis	r3, CONFIG_SYS_MONITOR_BASE@h
154	ori	r3, r3, CONFIG_SYS_MONITOR_BASE@l
155	addi	r3, r3, in_flash - _start + EXC_OFF_SYS_RESET
156	mtlr	r3
157	blr
158
159in_flash:
160
161	/* initialize some SPRs that are hard to access from C			*/
162	/*----------------------------------------------------------------------*/
163
164	lis	r3, CONFIG_SYS_IMMR@h		/* pass IMMR as arg1 to C routine */
165	ori	r1, r3, CONFIG_SYS_INIT_SP_OFFSET /* set up the stack in internal DPRAM */
166	/* Note: R0 is still 0 here */
167	stwu	r0, -4(r1)		/* clear final stack frame so that	*/
168	stwu	r0, -4(r1)		/* stack backtraces terminate cleanly	*/
169
170	/*
171	 * Disable serialized ifetch and show cycles
172	 * (i.e. set processor to normal mode).
173	 * This is also a silicon bug workaround, see errata
174	 */
175
176	li	r2, 0x0007
177	mtspr	ICTRL, r2
178
179	/* Set up debug mode entry */
180
181	lis	r2, CONFIG_SYS_DER@h
182	ori	r2, r2, CONFIG_SYS_DER@l
183	mtspr	DER, r2
184
185	/* let the C-code set up the rest					*/
186	/*									*/
187	/* Be careful to keep code relocatable !				*/
188	/*----------------------------------------------------------------------*/
189
190	GET_GOT			/* initialize GOT access			*/
191
192	/* r3: IMMR */
193	bl	cpu_init_f	/* run low-level CPU init code     (from Flash)	*/
194
195	bl	board_init_f	/* run 1st part of board init code (from Flash) */
196
197	/* NOTREACHED - board_init_f() does not return */
198
199
200	.globl	_start_of_vectors
201_start_of_vectors:
202
203/* Machine check */
204	STD_EXCEPTION(0x200, MachineCheck, MachineCheckException)
205
206/* Data Storage exception.  "Never" generated on the 860. */
207	STD_EXCEPTION(0x300, DataStorage, UnknownException)
208
209/* Instruction Storage exception.  "Never" generated on the 860. */
210	STD_EXCEPTION(0x400, InstStorage, UnknownException)
211
212/* External Interrupt exception. */
213	STD_EXCEPTION(0x500, ExtInterrupt, external_interrupt)
214
215/* Alignment exception. */
216	. = 0x600
217Alignment:
218	EXCEPTION_PROLOG(SRR0, SRR1)
219	mfspr	r4,DAR
220	stw	r4,_DAR(r21)
221	mfspr	r5,DSISR
222	stw	r5,_DSISR(r21)
223	addi	r3,r1,STACK_FRAME_OVERHEAD
224	EXC_XFER_TEMPLATE(Alignment, AlignmentException, MSR_KERNEL, COPY_EE)
225
226/* Program check exception */
227	. = 0x700
228ProgramCheck:
229	EXCEPTION_PROLOG(SRR0, SRR1)
230	addi	r3,r1,STACK_FRAME_OVERHEAD
231	EXC_XFER_TEMPLATE(ProgramCheck, ProgramCheckException,
232		MSR_KERNEL, COPY_EE)
233
234	/* No FPU on MPC8xx.  This exception is not supposed to happen.
235	*/
236	STD_EXCEPTION(0x800, FPUnavailable, UnknownException)
237
238	/* I guess we could implement decrementer, and may have
239	 * to someday for timekeeping.
240	 */
241	STD_EXCEPTION(0x900, Decrementer, timer_interrupt)
242	STD_EXCEPTION(0xa00, Trap_0a, UnknownException)
243	STD_EXCEPTION(0xb00, Trap_0b, UnknownException)
244	STD_EXCEPTION(0xc00, SystemCall, UnknownException)
245	STD_EXCEPTION(0xd00, SingleStep, UnknownException)
246
247	STD_EXCEPTION(0xe00, Trap_0e, UnknownException)
248	STD_EXCEPTION(0xf00, Trap_0f, UnknownException)
249
250	/* On the MPC8xx, this is a software emulation interrupt.  It occurs
251	 * for all unimplemented and illegal instructions.
252	 */
253	STD_EXCEPTION(0x1000, SoftEmu, SoftEmuException)
254
255	STD_EXCEPTION(0x1100, InstructionTLBMiss, UnknownException)
256	STD_EXCEPTION(0x1200, DataTLBMiss, UnknownException)
257	STD_EXCEPTION(0x1300, InstructionTLBError, UnknownException)
258	STD_EXCEPTION(0x1400, DataTLBError, UnknownException)
259
260	STD_EXCEPTION(0x1500, Reserved5, UnknownException)
261	STD_EXCEPTION(0x1600, Reserved6, UnknownException)
262	STD_EXCEPTION(0x1700, Reserved7, UnknownException)
263	STD_EXCEPTION(0x1800, Reserved8, UnknownException)
264	STD_EXCEPTION(0x1900, Reserved9, UnknownException)
265	STD_EXCEPTION(0x1a00, ReservedA, UnknownException)
266	STD_EXCEPTION(0x1b00, ReservedB, UnknownException)
267
268	STD_EXCEPTION(0x1c00, DataBreakpoint, UnknownException)
269	STD_EXCEPTION(0x1d00, InstructionBreakpoint, DebugException)
270	STD_EXCEPTION(0x1e00, PeripheralBreakpoint, UnknownException)
271	STD_EXCEPTION(0x1f00, DevPortBreakpoint, UnknownException)
272
273
274	.globl	_end_of_vectors
275_end_of_vectors:
276
277
278	. = 0x2000
279
280/*
281 * This code finishes saving the registers to the exception frame
282 * and jumps to the appropriate handler for the exception.
283 * Register r21 is pointer into trap frame, r1 has new stack pointer.
284 */
285	.globl	transfer_to_handler
286transfer_to_handler:
287	stw	r22,_NIP(r21)
288	lis	r22,MSR_POW@h
289	andc	r23,r23,r22
290	stw	r23,_MSR(r21)
291	SAVE_GPR(7, r21)
292	SAVE_4GPRS(8, r21)
293	SAVE_8GPRS(12, r21)
294	SAVE_8GPRS(24, r21)
295	mflr	r23
296	andi.	r24,r23,0x3f00		/* get vector offset */
297	stw	r24,TRAP(r21)
298	li	r22,0
299	stw	r22,RESULT(r21)
300	mtspr	SPRG2,r22		/* r1 is now kernel sp */
301	lwz	r24,0(r23)		/* virtual address of handler */
302	lwz	r23,4(r23)		/* where to go when done */
303	mtspr	SRR0,r24
304	mtspr	SRR1,r20
305	mtlr	r23
306	SYNC
307	rfi				/* jump to handler, enable MMU */
308
309int_return:
310	mfmsr	r28			/* Disable interrupts */
311	li	r4,0
312	ori	r4,r4,MSR_EE
313	andc	r28,r28,r4
314	SYNC				/* Some chip revs need this... */
315	mtmsr	r28
316	SYNC
317	lwz	r2,_CTR(r1)
318	lwz	r0,_LINK(r1)
319	mtctr	r2
320	mtlr	r0
321	lwz	r2,_XER(r1)
322	lwz	r0,_CCR(r1)
323	mtspr	XER,r2
324	mtcrf	0xFF,r0
325	REST_10GPRS(3, r1)
326	REST_10GPRS(13, r1)
327	REST_8GPRS(23, r1)
328	REST_GPR(31, r1)
329	lwz	r2,_NIP(r1)		/* Restore environment */
330	lwz	r0,_MSR(r1)
331	mtspr	SRR0,r2
332	mtspr	SRR1,r0
333	lwz	r0,GPR0(r1)
334	lwz	r2,GPR2(r1)
335	lwz	r1,GPR1(r1)
336	SYNC
337	rfi
338
339/* Cache functions.
340*/
341	.globl	icache_enable
342icache_enable:
343	SYNC
344	lis	r3, IDC_INVALL@h
345	mtspr	IC_CST, r3
346	lis	r3, IDC_ENABLE@h
347	mtspr	IC_CST, r3
348	blr
349
350	.globl	icache_disable
351icache_disable:
352	SYNC
353	lis	r3, IDC_DISABLE@h
354	mtspr	IC_CST, r3
355	blr
356
357	.globl	icache_status
358icache_status:
359	mfspr	r3, IC_CST
360	srwi	r3, r3, 31	/* >>31 => select bit 0 */
361	blr
362
363	.globl	dcache_enable
364dcache_enable:
365#if 0
366	SYNC
367#endif
368#if 1
369	lis	r3, 0x0400		/* Set cache mode with MMU off */
370	mtspr	MD_CTR, r3
371#endif
372
373	lis	r3, IDC_INVALL@h
374	mtspr	DC_CST, r3
375#if 0
376	lis	r3, DC_SFWT@h
377	mtspr	DC_CST, r3
378#endif
379	lis	r3, IDC_ENABLE@h
380	mtspr	DC_CST, r3
381	blr
382
383	.globl	dcache_disable
384dcache_disable:
385	SYNC
386	lis	r3, IDC_DISABLE@h
387	mtspr	DC_CST, r3
388	lis	r3, IDC_INVALL@h
389	mtspr	DC_CST, r3
390	blr
391
392	.globl	dcache_status
393dcache_status:
394	mfspr	r3, DC_CST
395	srwi	r3, r3, 31	/* >>31 => select bit 0 */
396	blr
397
398	.globl	dc_read
399dc_read:
400	mtspr	DC_ADR, r3
401	mfspr	r3, DC_DAT
402	blr
403
404/*
405 * unsigned int get_immr (unsigned int mask)
406 *
407 * return (mask ? (IMMR & mask) : IMMR);
408 */
409	.globl	get_immr
410get_immr:
411	mr	r4,r3		/* save mask */
412	mfspr	r3, IMMR	/* IMMR */
413	cmpwi	0,r4,0		/* mask != 0 ? */
414	beq	4f
415	and	r3,r3,r4	/* IMMR & mask */
4164:
417	blr
418
419	.globl get_pvr
420get_pvr:
421	mfspr	r3, PVR
422	blr
423
424
425	.globl wr_ic_cst
426wr_ic_cst:
427	mtspr	IC_CST, r3
428	blr
429
430	.globl rd_ic_cst
431rd_ic_cst:
432	mfspr	r3, IC_CST
433	blr
434
435	.globl wr_ic_adr
436wr_ic_adr:
437	mtspr	IC_ADR, r3
438	blr
439
440
441	.globl wr_dc_cst
442wr_dc_cst:
443	mtspr	DC_CST, r3
444	blr
445
446	.globl rd_dc_cst
447rd_dc_cst:
448	mfspr	r3, DC_CST
449	blr
450
451	.globl wr_dc_adr
452wr_dc_adr:
453	mtspr	DC_ADR, r3
454	blr
455
456/*------------------------------------------------------------------------------*/
457
458/*
459 * void relocate_code (addr_sp, gd, addr_moni)
460 *
461 * This "function" does not return, instead it continues in RAM
462 * after relocating the monitor code.
463 *
464 * r3 = dest
465 * r4 = src
466 * r5 = length in bytes
467 * r6 = cachelinesize
468 */
469	.globl	relocate_code
470relocate_code:
471	mr	r1,  r3		/* Set new stack pointer		*/
472	mr	r9,  r4		/* Save copy of Global Data pointer	*/
473	mr	r10, r5		/* Save copy of Destination Address	*/
474
475	GET_GOT
476	mr	r3,  r5				/* Destination Address	*/
477	lis	r4, CONFIG_SYS_MONITOR_BASE@h		/* Source      Address	*/
478	ori	r4, r4, CONFIG_SYS_MONITOR_BASE@l
479	lwz	r5, GOT(__init_end)
480	sub	r5, r5, r4
481	li	r6, CONFIG_SYS_CACHELINE_SIZE		/* Cache Line Size	*/
482
483	/*
484	 * Fix GOT pointer:
485	 *
486	 * New GOT-PTR = (old GOT-PTR - CONFIG_SYS_MONITOR_BASE) + Destination Address
487	 *
488	 * Offset:
489	 */
490	sub	r15, r10, r4
491
492	/* First our own GOT */
493	add	r12, r12, r15
494	/* then the one used by the C code */
495	add	r30, r30, r15
496
497	/*
498	 * Now relocate code
499	 */
500
501	cmplw	cr1,r3,r4
502	addi	r0,r5,3
503	srwi.	r0,r0,2
504	beq	cr1,4f		/* In place copy is not necessary	*/
505	beq	7f		/* Protect against 0 count		*/
506	mtctr	r0
507	bge	cr1,2f
508
509	la	r8,-4(r4)
510	la	r7,-4(r3)
5111:	lwzu	r0,4(r8)
512	stwu	r0,4(r7)
513	bdnz	1b
514	b	4f
515
5162:	slwi	r0,r0,2
517	add	r8,r4,r0
518	add	r7,r3,r0
5193:	lwzu	r0,-4(r8)
520	stwu	r0,-4(r7)
521	bdnz	3b
522
523/*
524 * Now flush the cache: note that we must start from a cache aligned
525 * address. Otherwise we might miss one cache line.
526 */
5274:	cmpwi	r6,0
528	add	r5,r3,r5
529	beq	7f		/* Always flush prefetch queue in any case */
530	subi	r0,r6,1
531	andc	r3,r3,r0
532	mr	r4,r3
5335:	dcbst	0,r4
534	add	r4,r4,r6
535	cmplw	r4,r5
536	blt	5b
537	sync			/* Wait for all dcbst to complete on bus */
538	mr	r4,r3
5396:	icbi	0,r4
540	add	r4,r4,r6
541	cmplw	r4,r5
542	blt	6b
5437:	sync			/* Wait for all icbi to complete on bus	*/
544	isync
545
546/*
547 * We are done. Do not return, instead branch to second part of board
548 * initialization, now running from RAM.
549 */
550
551	addi	r0, r10, in_ram - _start + EXC_OFF_SYS_RESET
552	mtlr	r0
553	blr
554
555in_ram:
556
557	/*
558	 * Relocation Function, r12 point to got2+0x8000
559	 *
560	 * Adjust got2 pointers, no need to check for 0, this code
561	 * already puts a few entries in the table.
562	 */
563	li	r0,__got2_entries@sectoff@l
564	la	r3,GOT(_GOT2_TABLE_)
565	lwz	r11,GOT(_GOT2_TABLE_)
566	mtctr	r0
567	sub	r11,r3,r11
568	addi	r3,r3,-4
5691:	lwzu	r0,4(r3)
570	cmpwi	r0,0
571	beq-	2f
572	add	r0,r0,r11
573	stw	r0,0(r3)
5742:	bdnz	1b
575
576	/*
577	 * Now adjust the fixups and the pointers to the fixups
578	 * in case we need to move ourselves again.
579	 */
580	li	r0,__fixup_entries@sectoff@l
581	lwz	r3,GOT(_FIXUP_TABLE_)
582	cmpwi	r0,0
583	mtctr	r0
584	addi	r3,r3,-4
585	beq	4f
5863:	lwzu	r4,4(r3)
587	lwzux	r0,r4,r11
588	cmpwi	r0,0
589	add	r0,r0,r11
590	stw	r10,0(r3)
591	beq-	5f
592	stw	r0,0(r4)
5935:	bdnz	3b
5944:
595clear_bss:
596	/*
597	 * Now clear BSS segment
598	 */
599	lwz	r3,GOT(__bss_start)
600	lwz	r4,GOT(_end)
601
602	cmplw	0, r3, r4
603	beq	6f
604
605	li	r0, 0
6065:
607	stw	r0, 0(r3)
608	addi	r3, r3, 4
609	cmplw	0, r3, r4
610	bne	5b
6116:
612
613	mr	r3, r9		/* Global Data pointer		*/
614	mr	r4, r10		/* Destination Address		*/
615	bl	board_init_r
616
617	/*
618	 * Copy exception vector code to low memory
619	 *
620	 * r3: dest_addr
621	 * r7: source address, r8: end address, r9: target address
622	 */
623	.globl	trap_init
624trap_init:
625	mflr	r4			/* save link register		*/
626	GET_GOT
627	lwz	r7, GOT(_start)
628	lwz	r8, GOT(_end_of_vectors)
629
630	li	r9, 0x100		/* reset vector always at 0x100 */
631
632	cmplw	0, r7, r8
633	bgelr				/* return if r7>=r8 - just in case */
6341:
635	lwz	r0, 0(r7)
636	stw	r0, 0(r9)
637	addi	r7, r7, 4
638	addi	r9, r9, 4
639	cmplw	0, r7, r8
640	bne	1b
641
642	/*
643	 * relocate `hdlr' and `int_return' entries
644	 */
645	li	r7, .L_MachineCheck - _start + EXC_OFF_SYS_RESET
646	li	r8, Alignment - _start + EXC_OFF_SYS_RESET
6472:
648	bl	trap_reloc
649	addi	r7, r7, 0x100		/* next exception vector	*/
650	cmplw	0, r7, r8
651	blt	2b
652
653	li	r7, .L_Alignment - _start + EXC_OFF_SYS_RESET
654	bl	trap_reloc
655
656	li	r7, .L_ProgramCheck - _start + EXC_OFF_SYS_RESET
657	bl	trap_reloc
658
659	li	r7, .L_FPUnavailable - _start + EXC_OFF_SYS_RESET
660	li	r8, SystemCall - _start + EXC_OFF_SYS_RESET
6613:
662	bl	trap_reloc
663	addi	r7, r7, 0x100		/* next exception vector	*/
664	cmplw	0, r7, r8
665	blt	3b
666
667	li	r7, .L_SingleStep - _start + EXC_OFF_SYS_RESET
668	li	r8, _end_of_vectors - _start + EXC_OFF_SYS_RESET
6694:
670	bl	trap_reloc
671	addi	r7, r7, 0x100		/* next exception vector	*/
672	cmplw	0, r7, r8
673	blt	4b
674
675	mtlr	r4			/* restore link register	*/
676	blr
677