1 /* 2 * (C) Copyright 2000-2002 3 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. 4 * 5 * SPDX-License-Identifier: GPL-2.0+ 6 */ 7 8 #include <common.h> 9 #include <watchdog.h> 10 11 #include <mpc8xx.h> 12 #include <commproc.h> 13 14 #if defined(CONFIG_SYS_RTCSC) || defined(CONFIG_SYS_RMDS) 15 DECLARE_GLOBAL_DATA_PTR; 16 #endif 17 18 #if defined(CONFIG_SYS_I2C_UCODE_PATCH) || defined(CONFIG_SYS_SPI_UCODE_PATCH) || \ 19 defined(CONFIG_SYS_SMC_UCODE_PATCH) 20 void cpm_load_patch (volatile immap_t * immr); 21 #endif 22 23 /* 24 * Breath some life into the CPU... 25 * 26 * Set up the memory map, 27 * initialize a bunch of registers, 28 * initialize the UPM's 29 */ 30 void cpu_init_f (volatile immap_t * immr) 31 { 32 volatile memctl8xx_t *memctl = &immr->im_memctl; 33 # ifdef CONFIG_SYS_PLPRCR 34 ulong mfmask; 35 # endif 36 ulong reg; 37 38 /* SYPCR - contains watchdog control (11-9) */ 39 40 immr->im_siu_conf.sc_sypcr = CONFIG_SYS_SYPCR; 41 42 #if defined(CONFIG_WATCHDOG) 43 reset_8xx_watchdog (immr); 44 #endif /* CONFIG_WATCHDOG */ 45 46 /* SIUMCR - contains debug pin configuration (11-6) */ 47 immr->im_siu_conf.sc_siumcr |= CONFIG_SYS_SIUMCR; 48 /* initialize timebase status and control register (11-26) */ 49 /* unlock TBSCRK */ 50 51 immr->im_sitk.sitk_tbscrk = KAPWR_KEY; 52 immr->im_sit.sit_tbscr = CONFIG_SYS_TBSCR; 53 54 /* initialize the PIT (11-31) */ 55 56 immr->im_sitk.sitk_piscrk = KAPWR_KEY; 57 immr->im_sit.sit_piscr = CONFIG_SYS_PISCR; 58 59 /* System integration timers. Don't change EBDF! (15-27) */ 60 61 immr->im_clkrstk.cark_sccrk = KAPWR_KEY; 62 reg = immr->im_clkrst.car_sccr; 63 reg &= SCCR_MASK; 64 reg |= CONFIG_SYS_SCCR; 65 immr->im_clkrst.car_sccr = reg; 66 67 /* PLL (CPU clock) settings (15-30) */ 68 69 immr->im_clkrstk.cark_plprcrk = KAPWR_KEY; 70 71 /* If CONFIG_SYS_PLPRCR (set in the various *_config.h files) tries to 72 * set the MF field, then just copy CONFIG_SYS_PLPRCR over car_plprcr, 73 * otherwise OR in CONFIG_SYS_PLPRCR so we do not change the current MF 74 * field value. 75 * 76 * For newer (starting MPC866) chips PLPRCR layout is different. 77 */ 78 #ifdef CONFIG_SYS_PLPRCR 79 if (get_immr(0xFFFF) >= MPC8xx_NEW_CLK) 80 mfmask = PLPRCR_MFACT_MSK; 81 else 82 mfmask = PLPRCR_MF_MSK; 83 84 if ((CONFIG_SYS_PLPRCR & mfmask) != 0) 85 reg = CONFIG_SYS_PLPRCR; /* reset control bits */ 86 else { 87 reg = immr->im_clkrst.car_plprcr; 88 reg &= mfmask; /* isolate MF-related fields */ 89 reg |= CONFIG_SYS_PLPRCR; /* reset control bits */ 90 } 91 immr->im_clkrst.car_plprcr = reg; 92 #endif 93 94 /* 95 * Memory Controller: 96 */ 97 98 /* perform BR0 reset that MPC850 Rev. A can't guarantee */ 99 reg = memctl->memc_br0; 100 reg &= BR_PS_MSK; /* Clear everything except Port Size bits */ 101 reg |= BR_V; /* then add just the "Bank Valid" bit */ 102 memctl->memc_br0 = reg; 103 104 /* Map banks 0 (and maybe 1) to the FLASH banks 0 (and 1) at 105 * preliminary addresses - these have to be modified later 106 * when FLASH size has been determined 107 * 108 * Depending on the size of the memory region defined by 109 * CONFIG_SYS_OR0_REMAP some boards (wide address mask) allow to map the 110 * CONFIG_SYS_MONITOR_BASE, while others (narrower address mask) can't 111 * map CONFIG_SYS_MONITOR_BASE. 112 * 113 * For example, for CONFIG_IVMS8, the CONFIG_SYS_MONITOR_BASE is 114 * 0xff000000, but CONFIG_SYS_OR0_REMAP's address mask is 0xfff80000. 115 * 116 * If BR0 wasn't loaded with address base 0xff000000, then BR0's 117 * base address remains as 0x00000000. However, the address mask 118 * have been narrowed to 512Kb, so CONFIG_SYS_MONITOR_BASE wasn't mapped 119 * into the Bank0. 120 * 121 * This is why CONFIG_IVMS8 and similar boards must load BR0 with 122 * CONFIG_SYS_BR0_PRELIM in advance. 123 * 124 * [Thanks to Michael Liao for this explanation. 125 * I owe him a free beer. - wd] 126 */ 127 128 #if defined(CONFIG_HERMES) || \ 129 defined(CONFIG_IP860) || \ 130 defined(CONFIG_IVML24) || \ 131 defined(CONFIG_IVMS8) || \ 132 defined(CONFIG_LWMON) || \ 133 defined(CONFIG_R360MPI) || \ 134 defined(CONFIG_RMU) || \ 135 defined(CONFIG_SPD823TS) 136 137 memctl->memc_br0 = CONFIG_SYS_BR0_PRELIM; 138 #endif 139 140 #if defined(CONFIG_SYS_OR0_REMAP) 141 memctl->memc_or0 = CONFIG_SYS_OR0_REMAP; 142 #endif 143 #if defined(CONFIG_SYS_OR1_REMAP) 144 memctl->memc_or1 = CONFIG_SYS_OR1_REMAP; 145 #endif 146 #if defined(CONFIG_SYS_OR5_REMAP) 147 memctl->memc_or5 = CONFIG_SYS_OR5_REMAP; 148 #endif 149 150 /* now restrict to preliminary range */ 151 memctl->memc_br0 = CONFIG_SYS_BR0_PRELIM; 152 memctl->memc_or0 = CONFIG_SYS_OR0_PRELIM; 153 154 #if (defined(CONFIG_SYS_OR1_PRELIM) && defined(CONFIG_SYS_BR1_PRELIM)) 155 memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM; 156 memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM; 157 #endif 158 159 #if defined(CONFIG_IP860) /* disable CS0 now that Flash is mapped on CS1 */ 160 memctl->memc_br0 = 0; 161 #endif 162 163 #if defined(CONFIG_SYS_OR2_PRELIM) && defined(CONFIG_SYS_BR2_PRELIM) 164 memctl->memc_or2 = CONFIG_SYS_OR2_PRELIM; 165 memctl->memc_br2 = CONFIG_SYS_BR2_PRELIM; 166 #endif 167 168 #if defined(CONFIG_SYS_OR3_PRELIM) && defined(CONFIG_SYS_BR3_PRELIM) 169 memctl->memc_or3 = CONFIG_SYS_OR3_PRELIM; 170 memctl->memc_br3 = CONFIG_SYS_BR3_PRELIM; 171 #endif 172 173 #if defined(CONFIG_SYS_OR4_PRELIM) && defined(CONFIG_SYS_BR4_PRELIM) 174 memctl->memc_or4 = CONFIG_SYS_OR4_PRELIM; 175 memctl->memc_br4 = CONFIG_SYS_BR4_PRELIM; 176 #endif 177 178 #if defined(CONFIG_SYS_OR5_PRELIM) && defined(CONFIG_SYS_BR5_PRELIM) 179 memctl->memc_or5 = CONFIG_SYS_OR5_PRELIM; 180 memctl->memc_br5 = CONFIG_SYS_BR5_PRELIM; 181 #endif 182 183 #if defined(CONFIG_SYS_OR6_PRELIM) && defined(CONFIG_SYS_BR6_PRELIM) 184 memctl->memc_or6 = CONFIG_SYS_OR6_PRELIM; 185 memctl->memc_br6 = CONFIG_SYS_BR6_PRELIM; 186 #endif 187 188 #if defined(CONFIG_SYS_OR7_PRELIM) && defined(CONFIG_SYS_BR7_PRELIM) 189 memctl->memc_or7 = CONFIG_SYS_OR7_PRELIM; 190 memctl->memc_br7 = CONFIG_SYS_BR7_PRELIM; 191 #endif 192 193 /* 194 * Reset CPM 195 */ 196 immr->im_cpm.cp_cpcr = CPM_CR_RST | CPM_CR_FLG; 197 do { /* Spin until command processed */ 198 __asm__ ("eieio"); 199 } while (immr->im_cpm.cp_cpcr & CPM_CR_FLG); 200 201 #ifdef CONFIG_SYS_RCCR /* must be done before cpm_load_patch() */ 202 /* write config value */ 203 immr->im_cpm.cp_rccr = CONFIG_SYS_RCCR; 204 #endif 205 206 #if defined(CONFIG_SYS_I2C_UCODE_PATCH) || defined(CONFIG_SYS_SPI_UCODE_PATCH) || \ 207 defined(CONFIG_SYS_SMC_UCODE_PATCH) 208 cpm_load_patch (immr); /* load mpc8xx microcode patch */ 209 #endif 210 } 211 212 /* 213 * initialize higher level parts of CPU like timers 214 */ 215 int cpu_init_r (void) 216 { 217 #if defined(CONFIG_SYS_RTCSC) || defined(CONFIG_SYS_RMDS) 218 bd_t *bd = gd->bd; 219 volatile immap_t *immr = (volatile immap_t *) (bd->bi_immr_base); 220 #endif 221 222 #ifdef CONFIG_SYS_RTCSC 223 /* Unlock RTSC register */ 224 immr->im_sitk.sitk_rtcsck = KAPWR_KEY; 225 /* write config value */ 226 immr->im_sit.sit_rtcsc = CONFIG_SYS_RTCSC; 227 #endif 228 229 #ifdef CONFIG_SYS_RMDS 230 /* write config value */ 231 immr->im_cpm.cp_rmds = CONFIG_SYS_RMDS; 232 #endif 233 return (0); 234 } 235