xref: /openbmc/u-boot/arch/powerpc/cpu/mpc8xx/Kconfig (revision eba6589f)
1menu "mpc8xx CPU"
2	depends on MPC8xx
3
4config SYS_CPU
5	default "mpc8xx"
6
7choice
8	prompt "Target select"
9	optional
10
11config TARGET_MCR3000
12	bool "Support MCR3000 board from CSSI"
13
14endchoice
15
16choice
17	prompt "CPU select"
18	default MPC866
19
20config MPC866
21	bool "MPC866"
22
23config MPC885
24	bool "MPC885"
25
26endchoice
27
28config MPC8xx_WATCHDOG
29	bool "Watchdog"
30	select HW_WATCHDOG
31
32config 8xx_GCLK_FREQ
33	int "CPU GCLK Frequency"
34
35comment "Specific commands"
36
37config CMD_IMMAP
38	bool "Enable various commands to dump IMMR information"
39	help
40	  This enables various commands such as:
41
42	    siuinfo - print System Interface Unit (SIU) registers
43	    memcinfo - print Memory Controller registers
44
45comment "Configuration Registers"
46
47config SYS_SIUMCR
48	hex "SIUMCR register"
49	help
50	  SIU Module Configuration (11-6)
51
52config SYS_SYPCR
53	hex "SYPCR register"
54	help
55	  System Protection Control (11-9)
56
57config SYS_TBSCR
58	hex "TBSCR register"
59	help
60	  Time Base Status and Control (11-26)
61
62config SYS_PISCR
63	hex "PISCR register"
64	help
65	  Periodic Interrupt Status and Control (11-31)
66
67config SYS_PLPRCR_BOOL
68	bool "Customise PLPRCR"
69
70config SYS_PLPRCR
71	hex "PLPRCR register"
72	depends on SYS_PLPRCR_BOOL
73	help
74	  PLL, Low-Power, and Reset Control Register (15-30)
75
76config SYS_SCCR
77	hex "SCCR register"
78	help
79	  System Clock and reset Control Register (15-27)
80
81config SYS_SCCR_MASK
82	hex "MASK for setting SCCR register"
83
84config SYS_DER
85	hex "DER register"
86	help
87	  Debug Event Register (37-47)
88
89comment "Memory mapping"
90
91config SYS_BR0_PRELIM
92	hex "Preliminary value for BR0"
93
94config SYS_OR0_PRELIM
95	hex "Preliminary value for OR0"
96
97config SYS_BR1_PRELIM_BOOL
98	bool "Define Bank 1"
99
100config SYS_BR1_PRELIM
101	hex "Preliminary value for BR1"
102	depends on SYS_BR1_PRELIM_BOOL
103
104config SYS_OR1_PRELIM
105	hex "Preliminary value for OR1"
106	depends on SYS_BR1_PRELIM_BOOL
107
108config SYS_BR2_PRELIM_BOOL
109	bool "Define Bank 2"
110
111config SYS_BR2_PRELIM
112	hex "Preliminary value for BR2"
113	depends on SYS_BR2_PRELIM_BOOL
114
115config SYS_OR2_PRELIM
116	hex "Preliminary value for OR2"
117	depends on SYS_BR2_PRELIM_BOOL
118
119config SYS_BR3_PRELIM_BOOL
120	bool "Define Bank 3"
121
122config SYS_BR3_PRELIM
123	hex "Preliminary value for BR3"
124	depends on SYS_BR3_PRELIM_BOOL
125
126config SYS_OR3_PRELIM
127	hex "Preliminary value for OR3"
128	depends on SYS_BR3_PRELIM_BOOL
129
130config SYS_BR4_PRELIM_BOOL
131	bool "Define Bank 4"
132
133config SYS_BR4_PRELIM
134	hex "Preliminary value for BR4"
135	depends on SYS_BR4_PRELIM_BOOL
136
137config SYS_OR4_PRELIM
138	hex "Preliminary value for OR4"
139	depends on SYS_BR4_PRELIM_BOOL
140
141config SYS_BR5_PRELIM_BOOL
142	bool "Define Bank 5"
143
144config SYS_BR5_PRELIM
145	hex "Preliminary value for BR5"
146	depends on SYS_BR5_PRELIM_BOOL
147
148config SYS_OR5_PRELIM
149	hex "Preliminary value for OR5"
150	depends on SYS_BR5_PRELIM_BOOL
151
152config SYS_BR6_PRELIM_BOOL
153	bool "Define Bank 6"
154
155config SYS_BR6_PRELIM
156	hex "Preliminary value for BR6"
157	depends on SYS_BR6_PRELIM_BOOL
158
159config SYS_OR6_PRELIM
160	hex "Preliminary value for OR6"
161	depends on SYS_BR6_PRELIM_BOOL
162
163config SYS_BR7_PRELIM_BOOL
164	bool "Define Bank 7"
165
166config SYS_BR7_PRELIM
167	hex "Preliminary value for BR7"
168	depends on SYS_BR7_PRELIM_BOOL
169
170config SYS_OR7_PRELIM
171	hex "Preliminary value for OR7"
172	depends on SYS_BR7_PRELIM_BOOL
173
174config SYS_IMMR
175	hex "Value for IMMR"
176
177source "board/cssi/MCR3000/Kconfig"
178
179endmenu
180