1 /* 2 * Copyright 2004,2009-2011 Freescale Semiconductor, Inc. 3 * Jeff Brown 4 * Srikanth Srinivasan (srikanth.srinivasan@freescale.com) 5 * 6 * See file CREDITS for list of people who contributed to this 7 * project. 8 * 9 * This program is free software; you can redistribute it and/or 10 * modify it under the terms of the GNU General Public License as 11 * published by the Free Software Foundation; either version 2 of 12 * the License, or (at your option) any later version. 13 * 14 * This program is distributed in the hope that it will be useful, 15 * but WITHOUT ANY WARRANTY; without even the implied warranty of 16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 * GNU General Public License for more details. 18 * 19 * You should have received a copy of the GNU General Public License 20 * along with this program; if not, write to the Free Software 21 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 22 * MA 02111-1307 USA 23 */ 24 25 /* 26 * cpu_init.c - low level cpu init 27 */ 28 29 #include <config.h> 30 #include <common.h> 31 #include <mpc86xx.h> 32 #include <asm/mmu.h> 33 #include <asm/fsl_law.h> 34 #include <asm/fsl_serdes.h> 35 #include <asm/mp.h> 36 37 extern void srio_init(void); 38 39 DECLARE_GLOBAL_DATA_PTR; 40 41 /* 42 * Breathe some life into the CPU... 43 * 44 * Set up the memory map 45 * initialize a bunch of registers 46 */ 47 48 void cpu_init_f(void) 49 { 50 /* Pointer is writable since we allocated a register for it */ 51 gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET); 52 53 /* Clear initial global data */ 54 memset ((void *) gd, 0, sizeof (gd_t)); 55 56 #ifdef CONFIG_FSL_LAW 57 init_laws(); 58 #endif 59 60 setup_bats(); 61 62 init_early_memctl_regs(); 63 64 #if defined(CONFIG_FSL_DMA) 65 dma_init(); 66 #endif 67 68 /* enable the timebase bit in HID0 */ 69 set_hid0(get_hid0() | 0x4000000); 70 71 /* enable EMCP, SYNCBE | ABE bits in HID1 */ 72 set_hid1(get_hid1() | 0x80000C00); 73 } 74 75 /* 76 * initialize higher level parts of CPU like timers 77 */ 78 int cpu_init_r(void) 79 { 80 /* needs to be in ram since code uses global static vars */ 81 fsl_serdes_init(); 82 83 #ifdef CONFIG_SYS_SRIO 84 srio_init(); 85 #endif 86 87 #if defined(CONFIG_MP) 88 setup_mp(); 89 #endif 90 return 0; 91 } 92 93 #ifdef CONFIG_ADDR_MAP 94 /* Initialize address mapping array */ 95 void init_addr_map(void) 96 { 97 int i; 98 ppc_bat_t bat = DBAT0; 99 phys_size_t size; 100 unsigned long upper, lower; 101 102 for (i = 0; i < CONFIG_SYS_NUM_ADDR_MAP; i++, bat++) { 103 if (read_bat(bat, &upper, &lower) != -1) { 104 if (!BATU_VALID(upper)) 105 size = 0; 106 else 107 size = BATU_SIZE(upper); 108 addrmap_set_entry(BATU_VADDR(upper), BATL_PADDR(lower), 109 size, i); 110 } 111 #ifdef CONFIG_HIGH_BATS 112 /* High bats are not contiguous with low BAT numbers */ 113 if (bat == DBAT3) 114 bat = DBAT4 - 1; 115 #endif 116 } 117 } 118 #endif 119