1/*
2 * (C) Copyright 2006
3 * Wolfgang Denk, DENX Software Engineering, wd@denx.de
4 *
5 * Copyright 2009 Freescale Semiconductor, Inc.
6 *
7 * SPDX-License-Identifier:	GPL-2.0+
8 */
9
10#include "config.h"	/* CONFIG_BOARDDIR */
11
12OUTPUT_ARCH(powerpc)
13#ifdef CONFIG_SYS_MPC85XX_NO_RESETVEC
14PHDRS
15{
16	text PT_LOAD;
17	bss PT_LOAD;
18}
19#endif
20SECTIONS
21{
22	. = CONFIG_SPL_TEXT_BASE;
23	.text : {
24		*(.text*)
25	}
26	_etext = .;
27
28	.reloc : {
29		_GOT2_TABLE_ = .;
30		KEEP(*(.got2))
31		KEEP(*(.got))
32		PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4);
33		_FIXUP_TABLE_ = .;
34		KEEP(*(.fixup))
35	}
36	__got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1;
37	__fixup_entries = (. - _FIXUP_TABLE_) >> 2;
38
39	. = ALIGN(8);
40	.data : {
41		*(.rodata*)
42		*(.data*)
43		*(.sdata*)
44	}
45	_edata  =  .;
46
47	. = ALIGN(4);
48	.u_boot_list : {
49		KEEP(*(SORT(.u_boot_list*)));
50	}
51
52	. = .;
53	__start___ex_table = .;
54	__ex_table : { *(__ex_table) }
55	__stop___ex_table = .;
56
57	. = ALIGN(8);
58	__init_begin = .;
59	__init_end = .;
60
61/* For ifc, elbc, esdhc, espi, all need the SPL without section .resetvec */
62#ifdef CONFIG_SYS_MPC85XX_NO_RESETVEC
63	.bootpg ADDR(.text) - 0x1000 :
64	{
65		KEEP(*(.bootpg))
66	} :text = 0xffff
67#else
68#if defined(CONFIG_FSL_IFC) /* Restrict bootpg at 4K boundry for IFC */
69	.bootpg ADDR(.text) + 0x1000 :
70	{
71		arch/powerpc/cpu/mpc85xx/start.o (.bootpg)
72	}
73#define RESET_VECTOR_OFFSET 0x1ffc /* IFC has 8K sram */
74#elif defined(CONFIG_FSL_ELBC)
75#define RESET_VECTOR_OFFSET 0xffc /* LBC has 4k sram */
76#else
77#error unknown NAND controller
78#endif
79	.resetvec ADDR(.text) + RESET_VECTOR_OFFSET : {
80		KEEP(*(.resetvec))
81	} = 0xffff
82#endif
83
84	/*
85	 * Make sure that the bss segment isn't linked at 0x0, otherwise its
86	 * address won't be updated during relocation fixups.
87	 */
88	. |= 0x10;
89
90	. = ALIGN(4);
91	__bss_start = .;
92	.bss : {
93		*(.sbss*)
94		*(.bss*)
95	}
96	. = ALIGN(4);
97	__bss_end = .;
98}
99