xref: /openbmc/u-boot/arch/powerpc/cpu/mpc85xx/start.S (revision 5794619e) 
1/*
2 * Copyright 2004, 2007-2010 Freescale Semiconductor, Inc.
3 * Copyright (C) 2003  Motorola,Inc.
4 *
5 * See file CREDITS for list of people who contributed to this
6 * project.
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
16 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21 * MA 02111-1307 USA
22 */
23
24/* U-Boot Startup Code for Motorola 85xx PowerPC based Embedded Boards
25 *
26 * The processor starts at 0xfffffffc and the code is first executed in the
27 * last 4K page(0xfffff000-0xffffffff) in flash/rom.
28 *
29 */
30
31#include <config.h>
32#include <mpc85xx.h>
33#include <timestamp.h>
34#include <version.h>
35
36#define _LINUX_CONFIG_H 1	/* avoid reading Linux autoconf.h file	*/
37
38#include <ppc_asm.tmpl>
39#include <ppc_defs.h>
40
41#include <asm/cache.h>
42#include <asm/mmu.h>
43
44#ifndef	 CONFIG_IDENT_STRING
45#define	 CONFIG_IDENT_STRING ""
46#endif
47
48#undef	MSR_KERNEL
49#define MSR_KERNEL ( MSR_ME )	/* Machine Check */
50
51/*
52 * Set up GOT: Global Offset Table
53 *
54 * Use r12 to access the GOT
55 */
56	START_GOT
57	GOT_ENTRY(_GOT2_TABLE_)
58	GOT_ENTRY(_FIXUP_TABLE_)
59
60#ifndef CONFIG_NAND_SPL
61	GOT_ENTRY(_start)
62	GOT_ENTRY(_start_of_vectors)
63	GOT_ENTRY(_end_of_vectors)
64	GOT_ENTRY(transfer_to_handler)
65#endif
66
67	GOT_ENTRY(__init_end)
68	GOT_ENTRY(_end)
69	GOT_ENTRY(__bss_start)
70	END_GOT
71
72/*
73 * e500 Startup -- after reset only the last 4KB of the effective
74 * address space is mapped in the MMU L2 TLB1 Entry0. The .bootpg
75 * section is located at THIS LAST page and basically does three
76 * things: clear some registers, set up exception tables and
77 * add more TLB entries for 'larger spaces'(e.g. the boot rom) to
78 * continue the boot procedure.
79
80 * Once the boot rom is mapped by TLB entries we can proceed
81 * with normal startup.
82 *
83 */
84
85	.section .bootpg,"ax"
86	.globl _start_e500
87
88_start_e500:
89
90/* clear registers/arrays not reset by hardware */
91
92	/* L1 */
93	li	r0,2
94	mtspr	L1CSR0,r0	/* invalidate d-cache */
95	mtspr	L1CSR1,r0	/* invalidate i-cache */
96
97	mfspr	r1,DBSR
98	mtspr	DBSR,r1		/* Clear all valid bits */
99
100	/*
101	 *	Enable L1 Caches early
102	 *
103	 */
104
105#if defined(CONFIG_E500MC) && defined(CONFIG_SYS_CACHE_STASHING)
106	/* set stash id to (coreID) * 2 + 32 + L1 CT (0) */
107	li	r2,(32 + 0)
108	mtspr	L1CSR2,r2
109#endif
110
111	/* Enable/invalidate the I-Cache */
112	lis	r2,(L1CSR1_ICFI|L1CSR1_ICLFR)@h
113	ori	r2,r2,(L1CSR1_ICFI|L1CSR1_ICLFR)@l
114	mtspr	SPRN_L1CSR1,r2
1151:
116	mfspr	r3,SPRN_L1CSR1
117	and.	r1,r3,r2
118	bne	1b
119
120	lis	r3,(L1CSR1_CPE|L1CSR1_ICE)@h
121	ori	r3,r3,(L1CSR1_CPE|L1CSR1_ICE)@l
122	mtspr	SPRN_L1CSR1,r3
123	isync
1242:
125	mfspr	r3,SPRN_L1CSR1
126	andi.	r1,r3,L1CSR1_ICE@l
127	beq	2b
128
129	/* Enable/invalidate the D-Cache */
130	lis	r2,(L1CSR0_DCFI|L1CSR0_DCLFR)@h
131	ori	r2,r2,(L1CSR0_DCFI|L1CSR0_DCLFR)@l
132	mtspr	SPRN_L1CSR0,r2
1331:
134	mfspr	r3,SPRN_L1CSR0
135	and.	r1,r3,r2
136	bne	1b
137
138	lis	r3,(L1CSR0_CPE|L1CSR0_DCE)@h
139	ori	r3,r3,(L1CSR0_CPE|L1CSR0_DCE)@l
140	mtspr	SPRN_L1CSR0,r3
141	isync
1422:
143	mfspr	r3,SPRN_L1CSR0
144	andi.	r1,r3,L1CSR0_DCE@l
145	beq	2b
146
147	/* Setup interrupt vectors */
148	lis	r1,TEXT_BASE@h
149	mtspr	IVPR,r1
150
151	li	r1,0x0100
152	mtspr	IVOR0,r1	/* 0: Critical input */
153	li	r1,0x0200
154	mtspr	IVOR1,r1	/* 1: Machine check */
155	li	r1,0x0300
156	mtspr	IVOR2,r1	/* 2: Data storage */
157	li	r1,0x0400
158	mtspr	IVOR3,r1	/* 3: Instruction storage */
159	li	r1,0x0500
160	mtspr	IVOR4,r1	/* 4: External interrupt */
161	li	r1,0x0600
162	mtspr	IVOR5,r1	/* 5: Alignment */
163	li	r1,0x0700
164	mtspr	IVOR6,r1	/* 6: Program check */
165	li	r1,0x0800
166	mtspr	IVOR7,r1	/* 7: floating point unavailable */
167	li	r1,0x0900
168	mtspr	IVOR8,r1	/* 8: System call */
169	/* 9: Auxiliary processor unavailable(unsupported) */
170	li	r1,0x0a00
171	mtspr	IVOR10,r1	/* 10: Decrementer */
172	li	r1,0x0b00
173	mtspr	IVOR11,r1	/* 11: Interval timer */
174	li	r1,0x0c00
175	mtspr	IVOR12,r1	/* 12: Watchdog timer */
176	li	r1,0x0d00
177	mtspr	IVOR13,r1	/* 13: Data TLB error */
178	li	r1,0x0e00
179	mtspr	IVOR14,r1	/* 14: Instruction TLB error */
180	li	r1,0x0f00
181	mtspr	IVOR15,r1	/* 15: Debug */
182
183	/* Clear and set up some registers. */
184	li      r0,0x0000
185	lis	r1,0xffff
186	mtspr	DEC,r0			/* prevent dec exceptions */
187	mttbl	r0			/* prevent fit & wdt exceptions */
188	mttbu	r0
189	mtspr	TSR,r1			/* clear all timer exception status */
190	mtspr	TCR,r0			/* disable all */
191	mtspr	ESR,r0			/* clear exception syndrome register */
192	mtspr	MCSR,r0			/* machine check syndrome register */
193	mtxer	r0			/* clear integer exception register */
194
195#ifdef CONFIG_SYS_BOOK3E_HV
196	mtspr	MAS8,r0			/* make sure MAS8 is clear */
197#endif
198
199	/* Enable Time Base and Select Time Base Clock */
200	lis	r0,HID0_EMCP@h		/* Enable machine check */
201#if defined(CONFIG_ENABLE_36BIT_PHYS)
202	ori	r0,r0,HID0_ENMAS7@l	/* Enable MAS7 */
203#endif
204#ifndef CONFIG_E500MC
205	ori	r0,r0,HID0_TBEN@l	/* Enable Timebase */
206#endif
207	mtspr	HID0,r0
208
209#ifndef CONFIG_E500MC
210	li	r0,(HID1_ASTME|HID1_ABE)@l	/* Addr streaming & broadcast */
211	mfspr	r3,PVR
212	andi.	r3,r3, 0xff
213	cmpwi	r3,0x50@l	/* if we are rev 5.0 or greater set MBDD */
214	blt 1f
215	/* Set MBDD bit also */
216	ori r0, r0, HID1_MBDD@l
2171:
218	mtspr	HID1,r0
219#endif
220
221	/* Enable Branch Prediction */
222#if defined(CONFIG_BTB)
223	lis	r0,BUCSR_ENABLE@h
224	ori	r0,r0,BUCSR_ENABLE@l
225	mtspr	SPRN_BUCSR,r0
226#endif
227
228#if defined(CONFIG_SYS_INIT_DBCR)
229	lis	r1,0xffff
230	ori	r1,r1,0xffff
231	mtspr	DBSR,r1			/* Clear all status bits */
232	lis	r0,CONFIG_SYS_INIT_DBCR@h	/* DBCR0[IDM] must be set */
233	ori	r0,r0,CONFIG_SYS_INIT_DBCR@l
234	mtspr	DBCR0,r0
235#endif
236
237#ifdef CONFIG_MPC8569
238#define CONFIG_SYS_LBC_ADDR (CONFIG_SYS_CCSRBAR_DEFAULT + 0x5000)
239#define CONFIG_SYS_LBCR_ADDR (CONFIG_SYS_LBC_ADDR + 0xd0)
240
241	/* MPC8569 Rev.0 silcon needs to set bit 13 of LBCR to allow elBC to
242	 * use address space which is more than 12bits, and it must be done in
243	 * the 4K boot page. So we set this bit here.
244	 */
245
246	/* create a temp mapping TLB0[0] for LBCR  */
247	lis     r6,FSL_BOOKE_MAS0(0, 0, 0)@h
248	ori     r6,r6,FSL_BOOKE_MAS0(0, 0, 0)@l
249
250	lis     r7,FSL_BOOKE_MAS1(1, 0, 0, 0, BOOKE_PAGESZ_4K)@h
251	ori     r7,r7,FSL_BOOKE_MAS1(1, 0, 0, 0, BOOKE_PAGESZ_4K)@l
252
253	lis     r8,FSL_BOOKE_MAS2(CONFIG_SYS_LBC_ADDR, MAS2_I|MAS2_G)@h
254	ori     r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_LBC_ADDR, MAS2_I|MAS2_G)@l
255
256	lis     r9,FSL_BOOKE_MAS3(CONFIG_SYS_LBC_ADDR, 0,
257						(MAS3_SX|MAS3_SW|MAS3_SR))@h
258	ori     r9,r9,FSL_BOOKE_MAS3(CONFIG_SYS_LBC_ADDR, 0,
259						(MAS3_SX|MAS3_SW|MAS3_SR))@l
260
261	mtspr   MAS0,r6
262	mtspr   MAS1,r7
263	mtspr   MAS2,r8
264	mtspr   MAS3,r9
265	isync
266	msync
267	tlbwe
268
269	/* Set LBCR register */
270	lis     r4,CONFIG_SYS_LBCR_ADDR@h
271	ori     r4,r4,CONFIG_SYS_LBCR_ADDR@l
272
273	lis     r5,CONFIG_SYS_LBC_LBCR@h
274	ori     r5,r5,CONFIG_SYS_LBC_LBCR@l
275	stw     r5,0(r4)
276	isync
277
278	/* invalidate this temp TLB */
279	lis	r4,CONFIG_SYS_LBC_ADDR@h
280	ori	r4,r4,CONFIG_SYS_LBC_ADDR@l
281	tlbivax	0,r4
282	isync
283
284#endif /* CONFIG_MPC8569 */
285
286	lis     r6,FSL_BOOKE_MAS0(1, 15, 0)@h
287	ori     r6,r6,FSL_BOOKE_MAS0(1, 15, 0)@l
288
289#ifndef CONFIG_SYS_RAMBOOT
290	/* create a temp mapping in AS=1 to the 4M boot window */
291	lis     r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_4M)@h
292	ori     r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_4M)@l
293
294	lis     r8,FSL_BOOKE_MAS2(TEXT_BASE & 0xffc00000, (MAS2_I|MAS2_G))@h
295	ori     r8,r8,FSL_BOOKE_MAS2(TEXT_BASE & 0xffc00000, (MAS2_I|MAS2_G))@l
296
297	/* The 85xx has the default boot window 0xff800000 - 0xffffffff */
298	lis     r9,FSL_BOOKE_MAS3(0xffc00000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h
299	ori     r9,r9,FSL_BOOKE_MAS3(0xffc00000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l
300#else
301	/*
302	 * create a temp mapping in AS=1 to the 1M TEXT_BASE space, the main
303	 * image has been relocated to TEXT_BASE on the second stage.
304	 */
305	lis     r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_1M)@h
306	ori     r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_1M)@l
307
308	lis     r8,FSL_BOOKE_MAS2(TEXT_BASE, (MAS2_I|MAS2_G))@h
309	ori     r8,r8,FSL_BOOKE_MAS2(TEXT_BASE, (MAS2_I|MAS2_G))@l
310
311	lis     r9,FSL_BOOKE_MAS3(TEXT_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h
312	ori     r9,r9,FSL_BOOKE_MAS3(TEXT_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l
313#endif
314
315	mtspr   MAS0,r6
316	mtspr   MAS1,r7
317	mtspr   MAS2,r8
318	mtspr   MAS3,r9
319	isync
320	msync
321	tlbwe
322
323	/* create a temp mapping in AS=1 to the stack */
324	lis     r6,FSL_BOOKE_MAS0(1, 14, 0)@h
325	ori     r6,r6,FSL_BOOKE_MAS0(1, 14, 0)@l
326
327	lis     r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_16K)@h
328	ori     r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_16K)@l
329
330	lis     r8,FSL_BOOKE_MAS2(CONFIG_SYS_INIT_RAM_ADDR, 0)@h
331	ori     r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_INIT_RAM_ADDR, 0)@l
332
333	lis     r9,FSL_BOOKE_MAS3(CONFIG_SYS_INIT_RAM_ADDR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h
334	ori     r9,r9,FSL_BOOKE_MAS3(CONFIG_SYS_INIT_RAM_ADDR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l
335
336	mtspr   MAS0,r6
337	mtspr   MAS1,r7
338	mtspr   MAS2,r8
339	mtspr   MAS3,r9
340	isync
341	msync
342	tlbwe
343
344	lis	r6,MSR_IS|MSR_DS@h
345	ori	r6,r6,MSR_IS|MSR_DS@l
346	lis	r7,switch_as@h
347	ori	r7,r7,switch_as@l
348
349	mtspr	SPRN_SRR0,r7
350	mtspr	SPRN_SRR1,r6
351	rfi
352
353switch_as:
354/* L1 DCache is used for initial RAM */
355
356	/* Allocate Initial RAM in data cache.
357	 */
358	lis	r3,CONFIG_SYS_INIT_RAM_ADDR@h
359	ori	r3,r3,CONFIG_SYS_INIT_RAM_ADDR@l
360	mfspr	r2, L1CFG0
361	andi.	r2, r2, 0x1ff
362	/* cache size * 1024 / (2 * L1 line size) */
363	slwi	r2, r2, (10 - 1 - L1_CACHE_SHIFT)
364	mtctr	r2
365	li	r0,0
3661:
367	dcbz	r0,r3
368	dcbtls	0,r0,r3
369	addi	r3,r3,CONFIG_SYS_CACHELINE_SIZE
370	bdnz	1b
371
372	/* Jump out the last 4K page and continue to 'normal' start */
373#ifdef CONFIG_SYS_RAMBOOT
374	b	_start_cont
375#else
376	/* Calculate absolute address in FLASH and jump there		*/
377	/*--------------------------------------------------------------*/
378	lis	r3,CONFIG_SYS_MONITOR_BASE@h
379	ori	r3,r3,CONFIG_SYS_MONITOR_BASE@l
380	addi	r3,r3,_start_cont - _start + _START_OFFSET
381	mtlr	r3
382	blr
383#endif
384
385	.text
386	.globl	_start
387_start:
388	.long	0x27051956		/* U-BOOT Magic Number */
389	.globl	version_string
390version_string:
391	.ascii U_BOOT_VERSION
392	.ascii " (", U_BOOT_DATE, " - ", U_BOOT_TIME, ")"
393	.ascii CONFIG_IDENT_STRING, "\0"
394
395	.align	4
396	.globl	_start_cont
397_start_cont:
398	/* Setup the stack in initial RAM,could be L2-as-SRAM or L1 dcache*/
399	lis	r1,CONFIG_SYS_INIT_RAM_ADDR@h
400	ori	r1,r1,CONFIG_SYS_INIT_SP_OFFSET@l
401
402	li	r0,0
403	stwu	r0,-4(r1)
404	stwu	r0,-4(r1)		/* Terminate call chain */
405
406	stwu	r1,-8(r1)		/* Save back chain and move SP */
407	lis	r0,RESET_VECTOR@h	/* Address of reset vector */
408	ori	r0,r0,RESET_VECTOR@l
409	stwu	r1,-8(r1)		/* Save back chain and move SP */
410	stw	r0,+12(r1)		/* Save return addr (underflow vect) */
411
412	GET_GOT
413	bl	cpu_init_early_f
414
415	/* switch back to AS = 0 */
416	lis	r3,(MSR_CE|MSR_ME|MSR_DE)@h
417	ori	r3,r3,(MSR_CE|MSR_ME|MSR_DE)@l
418	mtmsr	r3
419	isync
420
421	bl	cpu_init_f
422	bl	board_init_f
423	isync
424
425#ifndef CONFIG_NAND_SPL
426	. = EXC_OFF_SYS_RESET
427	.globl	_start_of_vectors
428_start_of_vectors:
429
430/* Critical input. */
431	CRIT_EXCEPTION(0x0100, CriticalInput, CritcalInputException)
432
433/* Machine check */
434	MCK_EXCEPTION(0x200, MachineCheck, MachineCheckException)
435
436/* Data Storage exception. */
437	STD_EXCEPTION(0x0300, DataStorage, UnknownException)
438
439/* Instruction Storage exception. */
440	STD_EXCEPTION(0x0400, InstStorage, UnknownException)
441
442/* External Interrupt exception. */
443	STD_EXCEPTION(0x0500, ExtInterrupt, ExtIntException)
444
445/* Alignment exception. */
446	. = 0x0600
447Alignment:
448	EXCEPTION_PROLOG(SRR0, SRR1)
449	mfspr	r4,DAR
450	stw	r4,_DAR(r21)
451	mfspr	r5,DSISR
452	stw	r5,_DSISR(r21)
453	addi	r3,r1,STACK_FRAME_OVERHEAD
454	EXC_XFER_TEMPLATE(Alignment, AlignmentException, MSR_KERNEL, COPY_EE)
455
456/* Program check exception */
457	. = 0x0700
458ProgramCheck:
459	EXCEPTION_PROLOG(SRR0, SRR1)
460	addi	r3,r1,STACK_FRAME_OVERHEAD
461	EXC_XFER_TEMPLATE(ProgramCheck, ProgramCheckException,
462		MSR_KERNEL, COPY_EE)
463
464	/* No FPU on MPC85xx.  This exception is not supposed to happen.
465	*/
466	STD_EXCEPTION(0x0800, FPUnavailable, UnknownException)
467
468	. = 0x0900
469/*
470 * r0 - SYSCALL number
471 * r3-... arguments
472 */
473SystemCall:
474	addis	r11,r0,0	/* get functions table addr */
475	ori	r11,r11,0	/* Note: this code is patched in trap_init */
476	addis	r12,r0,0	/* get number of functions */
477	ori	r12,r12,0
478
479	cmplw	0,r0,r12
480	bge	1f
481
482	rlwinm	r0,r0,2,0,31	/* fn_addr = fn_tbl[r0] */
483	add	r11,r11,r0
484	lwz	r11,0(r11)
485
486	li	r20,0xd00-4	/* Get stack pointer */
487	lwz	r12,0(r20)
488	subi	r12,r12,12	/* Adjust stack pointer */
489	li	r0,0xc00+_end_back-SystemCall
490	cmplw	0,r0,r12	/* Check stack overflow */
491	bgt	1f
492	stw	r12,0(r20)
493
494	mflr	r0
495	stw	r0,0(r12)
496	mfspr	r0,SRR0
497	stw	r0,4(r12)
498	mfspr	r0,SRR1
499	stw	r0,8(r12)
500
501	li	r12,0xc00+_back-SystemCall
502	mtlr	r12
503	mtspr	SRR0,r11
504
5051:	SYNC
506	rfi
507_back:
508
509	mfmsr	r11			/* Disable interrupts */
510	li	r12,0
511	ori	r12,r12,MSR_EE
512	andc	r11,r11,r12
513	SYNC				/* Some chip revs need this... */
514	mtmsr	r11
515	SYNC
516
517	li	r12,0xd00-4		/* restore regs */
518	lwz	r12,0(r12)
519
520	lwz	r11,0(r12)
521	mtlr	r11
522	lwz	r11,4(r12)
523	mtspr	SRR0,r11
524	lwz	r11,8(r12)
525	mtspr	SRR1,r11
526
527	addi	r12,r12,12		/* Adjust stack pointer */
528	li	r20,0xd00-4
529	stw	r12,0(r20)
530
531	SYNC
532	rfi
533_end_back:
534
535	STD_EXCEPTION(0x0a00, Decrementer, timer_interrupt)
536	STD_EXCEPTION(0x0b00, IntervalTimer, UnknownException)
537	STD_EXCEPTION(0x0c00, WatchdogTimer, UnknownException)
538
539	STD_EXCEPTION(0x0d00, DataTLBError, UnknownException)
540	STD_EXCEPTION(0x0e00, InstructionTLBError, UnknownException)
541
542	CRIT_EXCEPTION(0x0f00, DebugBreakpoint, DebugException )
543
544	.globl	_end_of_vectors
545_end_of_vectors:
546
547
548	. = . + (0x100 - ( . & 0xff ))	/* align for debug */
549
550/*
551 * This code finishes saving the registers to the exception frame
552 * and jumps to the appropriate handler for the exception.
553 * Register r21 is pointer into trap frame, r1 has new stack pointer.
554 */
555	.globl	transfer_to_handler
556transfer_to_handler:
557	stw	r22,_NIP(r21)
558	lis	r22,MSR_POW@h
559	andc	r23,r23,r22
560	stw	r23,_MSR(r21)
561	SAVE_GPR(7, r21)
562	SAVE_4GPRS(8, r21)
563	SAVE_8GPRS(12, r21)
564	SAVE_8GPRS(24, r21)
565
566	mflr	r23
567	andi.	r24,r23,0x3f00		/* get vector offset */
568	stw	r24,TRAP(r21)
569	li	r22,0
570	stw	r22,RESULT(r21)
571	mtspr	SPRG2,r22		/* r1 is now kernel sp */
572
573	lwz	r24,0(r23)		/* virtual address of handler */
574	lwz	r23,4(r23)		/* where to go when done */
575	mtspr	SRR0,r24
576	mtspr	SRR1,r20
577	mtlr	r23
578	SYNC
579	rfi				/* jump to handler, enable MMU */
580
581int_return:
582	mfmsr	r28		/* Disable interrupts */
583	li	r4,0
584	ori	r4,r4,MSR_EE
585	andc	r28,r28,r4
586	SYNC			/* Some chip revs need this... */
587	mtmsr	r28
588	SYNC
589	lwz	r2,_CTR(r1)
590	lwz	r0,_LINK(r1)
591	mtctr	r2
592	mtlr	r0
593	lwz	r2,_XER(r1)
594	lwz	r0,_CCR(r1)
595	mtspr	XER,r2
596	mtcrf	0xFF,r0
597	REST_10GPRS(3, r1)
598	REST_10GPRS(13, r1)
599	REST_8GPRS(23, r1)
600	REST_GPR(31, r1)
601	lwz	r2,_NIP(r1)	/* Restore environment */
602	lwz	r0,_MSR(r1)
603	mtspr	SRR0,r2
604	mtspr	SRR1,r0
605	lwz	r0,GPR0(r1)
606	lwz	r2,GPR2(r1)
607	lwz	r1,GPR1(r1)
608	SYNC
609	rfi
610
611crit_return:
612	mfmsr	r28		/* Disable interrupts */
613	li	r4,0
614	ori	r4,r4,MSR_EE
615	andc	r28,r28,r4
616	SYNC			/* Some chip revs need this... */
617	mtmsr	r28
618	SYNC
619	lwz	r2,_CTR(r1)
620	lwz	r0,_LINK(r1)
621	mtctr	r2
622	mtlr	r0
623	lwz	r2,_XER(r1)
624	lwz	r0,_CCR(r1)
625	mtspr	XER,r2
626	mtcrf	0xFF,r0
627	REST_10GPRS(3, r1)
628	REST_10GPRS(13, r1)
629	REST_8GPRS(23, r1)
630	REST_GPR(31, r1)
631	lwz	r2,_NIP(r1)	/* Restore environment */
632	lwz	r0,_MSR(r1)
633	mtspr	SPRN_CSRR0,r2
634	mtspr	SPRN_CSRR1,r0
635	lwz	r0,GPR0(r1)
636	lwz	r2,GPR2(r1)
637	lwz	r1,GPR1(r1)
638	SYNC
639	rfci
640
641mck_return:
642	mfmsr	r28		/* Disable interrupts */
643	li	r4,0
644	ori	r4,r4,MSR_EE
645	andc	r28,r28,r4
646	SYNC			/* Some chip revs need this... */
647	mtmsr	r28
648	SYNC
649	lwz	r2,_CTR(r1)
650	lwz	r0,_LINK(r1)
651	mtctr	r2
652	mtlr	r0
653	lwz	r2,_XER(r1)
654	lwz	r0,_CCR(r1)
655	mtspr	XER,r2
656	mtcrf	0xFF,r0
657	REST_10GPRS(3, r1)
658	REST_10GPRS(13, r1)
659	REST_8GPRS(23, r1)
660	REST_GPR(31, r1)
661	lwz	r2,_NIP(r1)	/* Restore environment */
662	lwz	r0,_MSR(r1)
663	mtspr	SPRN_MCSRR0,r2
664	mtspr	SPRN_MCSRR1,r0
665	lwz	r0,GPR0(r1)
666	lwz	r2,GPR2(r1)
667	lwz	r1,GPR1(r1)
668	SYNC
669	rfmci
670
671/* Cache functions.
672*/
673.globl invalidate_icache
674invalidate_icache:
675	mfspr	r0,L1CSR1
676	ori	r0,r0,L1CSR1_ICFI
677	msync
678	isync
679	mtspr	L1CSR1,r0
680	isync
681	blr				/* entire I cache */
682
683.globl invalidate_dcache
684invalidate_dcache:
685	mfspr	r0,L1CSR0
686	ori	r0,r0,L1CSR0_DCFI
687	msync
688	isync
689	mtspr	L1CSR0,r0
690	isync
691	blr
692
693	.globl	icache_enable
694icache_enable:
695	mflr	r8
696	bl	invalidate_icache
697	mtlr	r8
698	isync
699	mfspr	r4,L1CSR1
700	ori	r4,r4,0x0001
701	oris	r4,r4,0x0001
702	mtspr	L1CSR1,r4
703	isync
704	blr
705
706	.globl	icache_disable
707icache_disable:
708	mfspr	r0,L1CSR1
709	lis	r3,0
710	ori	r3,r3,L1CSR1_ICE
711	andc	r0,r0,r3
712	mtspr	L1CSR1,r0
713	isync
714	blr
715
716	.globl	icache_status
717icache_status:
718	mfspr	r3,L1CSR1
719	andi.	r3,r3,L1CSR1_ICE
720	blr
721
722	.globl	dcache_enable
723dcache_enable:
724	mflr	r8
725	bl	invalidate_dcache
726	mtlr	r8
727	isync
728	mfspr	r0,L1CSR0
729	ori	r0,r0,0x0001
730	oris	r0,r0,0x0001
731	msync
732	isync
733	mtspr	L1CSR0,r0
734	isync
735	blr
736
737	.globl	dcache_disable
738dcache_disable:
739	mfspr	r3,L1CSR0
740	lis	r4,0
741	ori	r4,r4,L1CSR0_DCE
742	andc	r3,r3,r4
743	mtspr	L1CSR0,r0
744	isync
745	blr
746
747	.globl	dcache_status
748dcache_status:
749	mfspr	r3,L1CSR0
750	andi.	r3,r3,L1CSR0_DCE
751	blr
752
753	.globl get_pir
754get_pir:
755	mfspr	r3,PIR
756	blr
757
758	.globl get_pvr
759get_pvr:
760	mfspr	r3,PVR
761	blr
762
763	.globl get_svr
764get_svr:
765	mfspr	r3,SVR
766	blr
767
768	.globl wr_tcr
769wr_tcr:
770	mtspr	TCR,r3
771	blr
772
773/*------------------------------------------------------------------------------- */
774/* Function:	 in8 */
775/* Description:	 Input 8 bits */
776/*------------------------------------------------------------------------------- */
777	.globl	in8
778in8:
779	lbz	r3,0x0000(r3)
780	blr
781
782/*------------------------------------------------------------------------------- */
783/* Function:	 out8 */
784/* Description:	 Output 8 bits */
785/*------------------------------------------------------------------------------- */
786	.globl	out8
787out8:
788	stb	r4,0x0000(r3)
789	sync
790	blr
791
792/*------------------------------------------------------------------------------- */
793/* Function:	 out16 */
794/* Description:	 Output 16 bits */
795/*------------------------------------------------------------------------------- */
796	.globl	out16
797out16:
798	sth	r4,0x0000(r3)
799	sync
800	blr
801
802/*------------------------------------------------------------------------------- */
803/* Function:	 out16r */
804/* Description:	 Byte reverse and output 16 bits */
805/*------------------------------------------------------------------------------- */
806	.globl	out16r
807out16r:
808	sthbrx	r4,r0,r3
809	sync
810	blr
811
812/*------------------------------------------------------------------------------- */
813/* Function:	 out32 */
814/* Description:	 Output 32 bits */
815/*------------------------------------------------------------------------------- */
816	.globl	out32
817out32:
818	stw	r4,0x0000(r3)
819	sync
820	blr
821
822/*------------------------------------------------------------------------------- */
823/* Function:	 out32r */
824/* Description:	 Byte reverse and output 32 bits */
825/*------------------------------------------------------------------------------- */
826	.globl	out32r
827out32r:
828	stwbrx	r4,r0,r3
829	sync
830	blr
831
832/*------------------------------------------------------------------------------- */
833/* Function:	 in16 */
834/* Description:	 Input 16 bits */
835/*------------------------------------------------------------------------------- */
836	.globl	in16
837in16:
838	lhz	r3,0x0000(r3)
839	blr
840
841/*------------------------------------------------------------------------------- */
842/* Function:	 in16r */
843/* Description:	 Input 16 bits and byte reverse */
844/*------------------------------------------------------------------------------- */
845	.globl	in16r
846in16r:
847	lhbrx	r3,r0,r3
848	blr
849
850/*------------------------------------------------------------------------------- */
851/* Function:	 in32 */
852/* Description:	 Input 32 bits */
853/*------------------------------------------------------------------------------- */
854	.globl	in32
855in32:
856	lwz	3,0x0000(3)
857	blr
858
859/*------------------------------------------------------------------------------- */
860/* Function:	 in32r */
861/* Description:	 Input 32 bits and byte reverse */
862/*------------------------------------------------------------------------------- */
863	.globl	in32r
864in32r:
865	lwbrx	r3,r0,r3
866	blr
867#endif  /* !CONFIG_NAND_SPL */
868
869/*------------------------------------------------------------------------------*/
870
871/*
872 * void write_tlb(mas0, mas1, mas2, mas3, mas7)
873 */
874	.globl	write_tlb
875write_tlb:
876	mtspr	MAS0,r3
877	mtspr	MAS1,r4
878	mtspr	MAS2,r5
879	mtspr	MAS3,r6
880#ifdef CONFIG_ENABLE_36BIT_PHYS
881	mtspr	MAS7,r7
882#endif
883	li	r3,0
884#ifdef CONFIG_SYS_BOOK3E_HV
885	mtspr	MAS8,r3
886#endif
887	isync
888	tlbwe
889	msync
890	isync
891	blr
892
893/*
894 * void relocate_code (addr_sp, gd, addr_moni)
895 *
896 * This "function" does not return, instead it continues in RAM
897 * after relocating the monitor code.
898 *
899 * r3 = dest
900 * r4 = src
901 * r5 = length in bytes
902 * r6 = cachelinesize
903 */
904	.globl	relocate_code
905relocate_code:
906	mr	r1,r3		/* Set new stack pointer		*/
907	mr	r9,r4		/* Save copy of Init Data pointer	*/
908	mr	r10,r5		/* Save copy of Destination Address	*/
909
910	GET_GOT
911	mr	r3,r5				/* Destination Address	*/
912	lis	r4,CONFIG_SYS_MONITOR_BASE@h		/* Source      Address	*/
913	ori	r4,r4,CONFIG_SYS_MONITOR_BASE@l
914	lwz	r5,GOT(__init_end)
915	sub	r5,r5,r4
916	li	r6,CONFIG_SYS_CACHELINE_SIZE		/* Cache Line Size	*/
917
918	/*
919	 * Fix GOT pointer:
920	 *
921	 * New GOT-PTR = (old GOT-PTR - CONFIG_SYS_MONITOR_BASE) + Destination Address
922	 *
923	 * Offset:
924	 */
925	sub	r15,r10,r4
926
927	/* First our own GOT */
928	add	r12,r12,r15
929	/* the the one used by the C code */
930	add	r30,r30,r15
931
932	/*
933	 * Now relocate code
934	 */
935
936	cmplw	cr1,r3,r4
937	addi	r0,r5,3
938	srwi.	r0,r0,2
939	beq	cr1,4f		/* In place copy is not necessary	*/
940	beq	7f		/* Protect against 0 count		*/
941	mtctr	r0
942	bge	cr1,2f
943
944	la	r8,-4(r4)
945	la	r7,-4(r3)
9461:	lwzu	r0,4(r8)
947	stwu	r0,4(r7)
948	bdnz	1b
949	b	4f
950
9512:	slwi	r0,r0,2
952	add	r8,r4,r0
953	add	r7,r3,r0
9543:	lwzu	r0,-4(r8)
955	stwu	r0,-4(r7)
956	bdnz	3b
957
958/*
959 * Now flush the cache: note that we must start from a cache aligned
960 * address. Otherwise we might miss one cache line.
961 */
9624:	cmpwi	r6,0
963	add	r5,r3,r5
964	beq	7f		/* Always flush prefetch queue in any case */
965	subi	r0,r6,1
966	andc	r3,r3,r0
967	mr	r4,r3
9685:	dcbst	0,r4
969	add	r4,r4,r6
970	cmplw	r4,r5
971	blt	5b
972	sync			/* Wait for all dcbst to complete on bus */
973	mr	r4,r3
9746:	icbi	0,r4
975	add	r4,r4,r6
976	cmplw	r4,r5
977	blt	6b
9787:	sync			/* Wait for all icbi to complete on bus */
979	isync
980
981	/*
982	 * Re-point the IVPR at RAM
983	 */
984	mtspr	IVPR,r10
985
986/*
987 * We are done. Do not return, instead branch to second part of board
988 * initialization, now running from RAM.
989 */
990
991	addi	r0,r10,in_ram - _start + _START_OFFSET
992	mtlr	r0
993	blr				/* NEVER RETURNS! */
994	.globl	in_ram
995in_ram:
996
997	/*
998	 * Relocation Function, r12 point to got2+0x8000
999	 *
1000	 * Adjust got2 pointers, no need to check for 0, this code
1001	 * already puts a few entries in the table.
1002	 */
1003	li	r0,__got2_entries@sectoff@l
1004	la	r3,GOT(_GOT2_TABLE_)
1005	lwz	r11,GOT(_GOT2_TABLE_)
1006	mtctr	r0
1007	sub	r11,r3,r11
1008	addi	r3,r3,-4
10091:	lwzu	r0,4(r3)
1010	cmpwi	r0,0
1011	beq-	2f
1012	add	r0,r0,r11
1013	stw	r0,0(r3)
10142:	bdnz	1b
1015
1016	/*
1017	 * Now adjust the fixups and the pointers to the fixups
1018	 * in case we need to move ourselves again.
1019	 */
1020	li	r0,__fixup_entries@sectoff@l
1021	lwz	r3,GOT(_FIXUP_TABLE_)
1022	cmpwi	r0,0
1023	mtctr	r0
1024	addi	r3,r3,-4
1025	beq	4f
10263:	lwzu	r4,4(r3)
1027	lwzux	r0,r4,r11
1028	add	r0,r0,r11
1029	stw	r10,0(r3)
1030	stw	r0,0(r4)
1031	bdnz	3b
10324:
1033clear_bss:
1034	/*
1035	 * Now clear BSS segment
1036	 */
1037	lwz	r3,GOT(__bss_start)
1038	lwz	r4,GOT(_end)
1039
1040	cmplw	0,r3,r4
1041	beq	6f
1042
1043	li	r0,0
10445:
1045	stw	r0,0(r3)
1046	addi	r3,r3,4
1047	cmplw	0,r3,r4
1048	bne	5b
10496:
1050
1051	mr	r3,r9		/* Init Data pointer		*/
1052	mr	r4,r10		/* Destination Address		*/
1053	bl	board_init_r
1054
1055#ifndef CONFIG_NAND_SPL
1056	/*
1057	 * Copy exception vector code to low memory
1058	 *
1059	 * r3: dest_addr
1060	 * r7: source address, r8: end address, r9: target address
1061	 */
1062	.globl	trap_init
1063trap_init:
1064	mflr	r4			/* save link register		*/
1065	GET_GOT
1066	lwz	r7,GOT(_start_of_vectors)
1067	lwz	r8,GOT(_end_of_vectors)
1068
1069	li	r9,0x100		/* reset vector always at 0x100 */
1070
1071	cmplw	0,r7,r8
1072	bgelr				/* return if r7>=r8 - just in case */
10731:
1074	lwz	r0,0(r7)
1075	stw	r0,0(r9)
1076	addi	r7,r7,4
1077	addi	r9,r9,4
1078	cmplw	0,r7,r8
1079	bne	1b
1080
1081	/*
1082	 * relocate `hdlr' and `int_return' entries
1083	 */
1084	li	r7,.L_CriticalInput - _start + _START_OFFSET
1085	bl	trap_reloc
1086	li	r7,.L_MachineCheck - _start + _START_OFFSET
1087	bl	trap_reloc
1088	li	r7,.L_DataStorage - _start + _START_OFFSET
1089	bl	trap_reloc
1090	li	r7,.L_InstStorage - _start + _START_OFFSET
1091	bl	trap_reloc
1092	li	r7,.L_ExtInterrupt - _start + _START_OFFSET
1093	bl	trap_reloc
1094	li	r7,.L_Alignment - _start + _START_OFFSET
1095	bl	trap_reloc
1096	li	r7,.L_ProgramCheck - _start + _START_OFFSET
1097	bl	trap_reloc
1098	li	r7,.L_FPUnavailable - _start + _START_OFFSET
1099	bl	trap_reloc
1100	li	r7,.L_Decrementer - _start + _START_OFFSET
1101	bl	trap_reloc
1102	li	r7,.L_IntervalTimer - _start + _START_OFFSET
1103	li	r8,_end_of_vectors - _start + _START_OFFSET
11042:
1105	bl	trap_reloc
1106	addi	r7,r7,0x100		/* next exception vector	*/
1107	cmplw	0,r7,r8
1108	blt	2b
1109
1110	lis	r7,0x0
1111	mtspr	IVPR,r7
1112
1113	mtlr	r4			/* restore link register	*/
1114	blr
1115
1116.globl unlock_ram_in_cache
1117unlock_ram_in_cache:
1118	/* invalidate the INIT_RAM section */
1119	lis	r3,(CONFIG_SYS_INIT_RAM_ADDR & ~(CONFIG_SYS_CACHELINE_SIZE-1))@h
1120	ori	r3,r3,(CONFIG_SYS_INIT_RAM_ADDR & ~(CONFIG_SYS_CACHELINE_SIZE-1))@l
1121	mfspr	r4,L1CFG0
1122	andi.	r4,r4,0x1ff
1123	slwi	r4,r4,(10 - 1 - L1_CACHE_SHIFT)
1124	mtctr	r4
11251:	dcbi	r0,r3
1126	addi	r3,r3,CONFIG_SYS_CACHELINE_SIZE
1127	bdnz	1b
1128	sync
1129
1130	/* Invalidate the TLB entries for the cache */
1131	lis	r3,CONFIG_SYS_INIT_RAM_ADDR@h
1132	ori	r3,r3,CONFIG_SYS_INIT_RAM_ADDR@l
1133	tlbivax	0,r3
1134	addi	r3,r3,0x1000
1135	tlbivax	0,r3
1136	addi	r3,r3,0x1000
1137	tlbivax	0,r3
1138	addi	r3,r3,0x1000
1139	tlbivax	0,r3
1140	isync
1141	blr
1142
1143.globl flush_dcache
1144flush_dcache:
1145	mfspr	r3,SPRN_L1CFG0
1146
1147	rlwinm	r5,r3,9,3	/* Extract cache block size */
1148	twlgti	r5,1		/* Only 32 and 64 byte cache blocks
1149				 * are currently defined.
1150				 */
1151	li	r4,32
1152	subfic	r6,r5,2		/* r6 = log2(1KiB / cache block size) -
1153				 *      log2(number of ways)
1154				 */
1155	slw	r5,r4,r5	/* r5 = cache block size */
1156
1157	rlwinm	r7,r3,0,0xff	/* Extract number of KiB in the cache */
1158	mulli	r7,r7,13	/* An 8-way cache will require 13
1159				 * loads per set.
1160				 */
1161	slw	r7,r7,r6
1162
1163	/* save off HID0 and set DCFA */
1164	mfspr	r8,SPRN_HID0
1165	ori	r9,r8,HID0_DCFA@l
1166	mtspr	SPRN_HID0,r9
1167	isync
1168
1169	lis	r4,0
1170	mtctr	r7
1171
11721:	lwz	r3,0(r4)	/* Load... */
1173	add	r4,r4,r5
1174	bdnz	1b
1175
1176	msync
1177	lis	r4,0
1178	mtctr	r7
1179
11801:	dcbf	0,r4		/* ...and flush. */
1181	add	r4,r4,r5
1182	bdnz	1b
1183
1184	/* restore HID0 */
1185	mtspr	SPRN_HID0,r8
1186	isync
1187
1188	blr
1189
1190.globl setup_ivors
1191setup_ivors:
1192
1193#include "fixed_ivor.S"
1194	blr
1195#endif /* !CONFIG_NAND_SPL */
1196