1 /* 2 * (C) Copyright 2000-2002 3 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. 4 * 5 * (C) Copyright 2002 (440 port) 6 * Scott McNutt, Artesyn Communication Producs, smcnutt@artsyncp.com 7 * 8 * (C) Copyright 2003 Motorola Inc. (MPC85xx port) 9 * Xianghua Xiao (X.Xiao@motorola.com) 10 * 11 * SPDX-License-Identifier: GPL-2.0+ 12 */ 13 14 #include <common.h> 15 #include <watchdog.h> 16 #include <command.h> 17 #include <asm/processor.h> 18 #include <asm/io.h> 19 #ifdef CONFIG_POST 20 #include <post.h> 21 #endif 22 23 int interrupt_init_cpu(unsigned *decrementer_count) 24 { 25 ccsr_pic_t __iomem *pic = (void *)CONFIG_SYS_MPC8xxx_PIC_ADDR; 26 27 #ifdef CONFIG_POST 28 /* 29 * The POST word is stored in the PIC's TFRR register which gets 30 * cleared when the PIC is reset. Save it off so we can restore it 31 * later. 32 */ 33 ulong post_word = post_word_load(); 34 #endif 35 36 out_be32(&pic->gcr, MPC85xx_PICGCR_RST); 37 while (in_be32(&pic->gcr) & MPC85xx_PICGCR_RST) 38 ; 39 out_be32(&pic->gcr, MPC85xx_PICGCR_M); 40 in_be32(&pic->gcr); 41 42 *decrementer_count = get_tbclk() / CONFIG_SYS_HZ; 43 44 /* PIE is same as DIE, dec interrupt enable */ 45 mtspr(SPRN_TCR, mfspr(SPRN_TCR) | TCR_PIE); 46 47 #ifdef CONFIG_INTERRUPTS 48 pic->iivpr1 = 0x810001; /* 50220 enable ecm interrupts */ 49 debug("iivpr1@%x = %x\n", (uint)&pic->iivpr1, pic->iivpr1); 50 51 pic->iivpr2 = 0x810002; /* 50240 enable ddr interrupts */ 52 debug("iivpr2@%x = %x\n", (uint)&pic->iivpr2, pic->iivpr2); 53 54 pic->iivpr3 = 0x810003; /* 50260 enable lbc interrupts */ 55 debug("iivpr3@%x = %x\n", (uint)&pic->iivpr3, pic->iivpr3); 56 57 #ifdef CONFIG_PCI1 58 pic->iivpr8 = 0x810008; /* enable pci1 interrupts */ 59 debug("iivpr8@%x = %x\n", (uint)&pic->iivpr8, pic->iivpr8); 60 #endif 61 #if defined(CONFIG_PCI2) || defined(CONFIG_PCIE2) 62 pic->iivpr9 = 0x810009; /* enable pci1 interrupts */ 63 debug("iivpr9@%x = %x\n", (uint)&pic->iivpr9, pic->iivpr9); 64 #endif 65 #ifdef CONFIG_PCIE1 66 pic->iivpr10 = 0x81000a; /* enable pcie1 interrupts */ 67 debug("iivpr10@%x = %x\n", (uint)&pic->iivpr10, pic->iivpr10); 68 #endif 69 #ifdef CONFIG_PCIE3 70 pic->iivpr11 = 0x81000b; /* enable pcie3 interrupts */ 71 debug("iivpr11@%x = %x\n", (uint)&pic->iivpr11, pic->iivpr11); 72 #endif 73 74 pic->ctpr=0; /* 40080 clear current task priority register */ 75 #endif 76 77 #ifdef CONFIG_POST 78 post_word_store(post_word); 79 #endif 80 81 return (0); 82 } 83 84 /* Install and free a interrupt handler. Not implemented yet. */ 85 86 void 87 irq_install_handler(int vec, interrupt_handler_t *handler, void *arg) 88 { 89 return; 90 } 91 92 void 93 irq_free_handler(int vec) 94 { 95 return; 96 } 97 98 void timer_interrupt_cpu(struct pt_regs *regs) 99 { 100 /* PIS is same as DIS, dec interrupt status */ 101 mtspr(SPRN_TSR, TSR_PIS); 102 } 103 104 #if defined(CONFIG_CMD_IRQ) 105 /* irqinfo - print information about PCI devices,not implemented. */ 106 int do_irqinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) 107 { 108 return 0; 109 } 110 #endif 111