1 /* 2 * Copyright 2007-2011 Freescale Semiconductor, Inc. 3 * 4 * (C) Copyright 2000 5 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. 6 * 7 * SPDX-License-Identifier: GPL-2.0+ 8 */ 9 10 #include <common.h> 11 #include <libfdt.h> 12 #include <fdt_support.h> 13 #include <asm/processor.h> 14 #include <linux/ctype.h> 15 #include <asm/io.h> 16 #include <asm/fsl_fdt.h> 17 #include <asm/fsl_portals.h> 18 #include <hwconfig.h> 19 #ifdef CONFIG_FSL_ESDHC 20 #include <fsl_esdhc.h> 21 #endif 22 #ifdef CONFIG_SYS_DPAA_FMAN 23 #include <fsl_fman.h> 24 #endif 25 26 DECLARE_GLOBAL_DATA_PTR; 27 28 extern void ft_qe_setup(void *blob); 29 extern void ft_fixup_num_cores(void *blob); 30 extern void ft_srio_setup(void *blob); 31 32 #ifdef CONFIG_MP 33 #include "mp.h" 34 35 void ft_fixup_cpu(void *blob, u64 memory_limit) 36 { 37 int off; 38 phys_addr_t spin_tbl_addr = get_spin_phys_addr(); 39 u32 bootpg = determine_mp_bootpg(NULL); 40 u32 id = get_my_id(); 41 const char *enable_method; 42 #if defined(T1040_TDM_QUIRK_CCSR_BASE) 43 int ret; 44 int tdm_hwconfig_enabled = 0; 45 char buffer[HWCONFIG_BUFFER_SIZE] = {0}; 46 #endif 47 48 off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4); 49 while (off != -FDT_ERR_NOTFOUND) { 50 u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", 0); 51 52 if (reg) { 53 u32 phys_cpu_id = thread_to_core(*reg); 54 u64 val = phys_cpu_id * SIZE_BOOT_ENTRY + spin_tbl_addr; 55 val = cpu_to_fdt64(val); 56 if (*reg == id) { 57 fdt_setprop_string(blob, off, "status", 58 "okay"); 59 } else { 60 fdt_setprop_string(blob, off, "status", 61 "disabled"); 62 } 63 64 if (hold_cores_in_reset(0)) { 65 #ifdef CONFIG_FSL_CORENET 66 /* Cores held in reset, use BRR to release */ 67 enable_method = "fsl,brr-holdoff"; 68 #else 69 /* Cores held in reset, use EEBPCR to release */ 70 enable_method = "fsl,eebpcr-holdoff"; 71 #endif 72 } else { 73 /* Cores out of reset and in a spin-loop */ 74 enable_method = "spin-table"; 75 76 fdt_setprop(blob, off, "cpu-release-addr", 77 &val, sizeof(val)); 78 } 79 80 fdt_setprop_string(blob, off, "enable-method", 81 enable_method); 82 } else { 83 printf ("cpu NULL\n"); 84 } 85 off = fdt_node_offset_by_prop_value(blob, off, 86 "device_type", "cpu", 4); 87 } 88 89 #if defined(T1040_TDM_QUIRK_CCSR_BASE) 90 #define CONFIG_MEM_HOLE_16M 0x1000000 91 /* 92 * Extract hwconfig from environment. 93 * Search for tdm entry in hwconfig. 94 */ 95 ret = getenv_f("hwconfig", buffer, sizeof(buffer)); 96 if (ret > 0) 97 tdm_hwconfig_enabled = hwconfig_f("tdm", buffer); 98 99 /* Reserve the memory hole created by TDM LAW, so OSes dont use it */ 100 if (tdm_hwconfig_enabled) { 101 off = fdt_add_mem_rsv(blob, T1040_TDM_QUIRK_CCSR_BASE, 102 CONFIG_MEM_HOLE_16M); 103 if (off < 0) 104 printf("Failed to reserve memory for tdm: %s\n", 105 fdt_strerror(off)); 106 } 107 #endif 108 109 /* Reserve the boot page so OSes dont use it */ 110 if ((u64)bootpg < memory_limit) { 111 off = fdt_add_mem_rsv(blob, bootpg, (u64)4096); 112 if (off < 0) 113 printf("Failed to reserve memory for bootpg: %s\n", 114 fdt_strerror(off)); 115 } 116 117 #ifndef CONFIG_MPC8xxx_DISABLE_BPTR 118 /* 119 * Reserve the default boot page so OSes dont use it. 120 * The default boot page is always mapped to bootpg above using 121 * boot page translation. 122 */ 123 if (0xfffff000ull < memory_limit) { 124 off = fdt_add_mem_rsv(blob, 0xfffff000ull, (u64)4096); 125 if (off < 0) { 126 printf("Failed to reserve memory for 0xfffff000: %s\n", 127 fdt_strerror(off)); 128 } 129 } 130 #endif 131 132 /* Reserve spin table page */ 133 if (spin_tbl_addr < memory_limit) { 134 off = fdt_add_mem_rsv(blob, 135 (spin_tbl_addr & ~0xffful), 4096); 136 if (off < 0) 137 printf("Failed to reserve memory for spin table: %s\n", 138 fdt_strerror(off)); 139 } 140 #ifdef CONFIG_DEEP_SLEEP 141 #ifdef CONFIG_SPL_MMC_BOOT 142 off = fdt_add_mem_rsv(blob, CONFIG_SYS_MMC_U_BOOT_START, 143 CONFIG_SYS_MMC_U_BOOT_SIZE); 144 if (off < 0) 145 printf("Failed to reserve memory for SD deep sleep: %s\n", 146 fdt_strerror(off)); 147 #elif defined(CONFIG_SPL_SPI_BOOT) 148 off = fdt_add_mem_rsv(blob, CONFIG_SYS_SPI_FLASH_U_BOOT_START, 149 CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE); 150 if (off < 0) 151 printf("Failed to reserve memory for SPI deep sleep: %s\n", 152 fdt_strerror(off)); 153 #endif 154 #endif 155 } 156 #endif 157 158 #ifdef CONFIG_SYS_FSL_CPC 159 static inline void ft_fixup_l3cache(void *blob, int off) 160 { 161 u32 line_size, num_ways, size, num_sets; 162 cpc_corenet_t *cpc = (void *)CONFIG_SYS_FSL_CPC_ADDR; 163 u32 cfg0 = in_be32(&cpc->cpccfg0); 164 165 size = CPC_CFG0_SZ_K(cfg0) * 1024 * CONFIG_SYS_NUM_CPC; 166 num_ways = CPC_CFG0_NUM_WAYS(cfg0); 167 line_size = CPC_CFG0_LINE_SZ(cfg0); 168 num_sets = size / (line_size * num_ways); 169 170 fdt_setprop(blob, off, "cache-unified", NULL, 0); 171 fdt_setprop_cell(blob, off, "cache-block-size", line_size); 172 fdt_setprop_cell(blob, off, "cache-size", size); 173 fdt_setprop_cell(blob, off, "cache-sets", num_sets); 174 fdt_setprop_cell(blob, off, "cache-level", 3); 175 #ifdef CONFIG_SYS_CACHE_STASHING 176 fdt_setprop_cell(blob, off, "cache-stash-id", 1); 177 #endif 178 } 179 #else 180 #define ft_fixup_l3cache(x, y) 181 #endif 182 183 #if defined(CONFIG_L2_CACHE) || \ 184 defined(CONFIG_BACKSIDE_L2_CACHE) || \ 185 defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2) 186 static inline void ft_fixup_l2cache_compatible(void *blob, int off) 187 { 188 int len; 189 struct cpu_type *cpu = identify_cpu(SVR_SOC_VER(get_svr())); 190 191 if (cpu) { 192 char buf[40]; 193 194 if (isdigit(cpu->name[0])) { 195 /* MPCxxxx, where xxxx == 4-digit number */ 196 len = sprintf(buf, "fsl,mpc%s-l2-cache-controller", 197 cpu->name) + 1; 198 } else { 199 /* Pxxxx or Txxxx, where xxxx == 4-digit number */ 200 len = sprintf(buf, "fsl,%c%s-l2-cache-controller", 201 tolower(cpu->name[0]), cpu->name + 1) + 1; 202 } 203 204 /* 205 * append "cache" after the NULL character that the previous 206 * sprintf wrote. This is how a device tree stores multiple 207 * strings in a property. 208 */ 209 len += sprintf(buf + len, "cache") + 1; 210 211 fdt_setprop(blob, off, "compatible", buf, len); 212 } 213 } 214 #endif 215 216 #if defined(CONFIG_L2_CACHE) 217 /* return size in kilobytes */ 218 static inline u32 l2cache_size(void) 219 { 220 volatile ccsr_l2cache_t *l2cache = (void *)CONFIG_SYS_MPC85xx_L2_ADDR; 221 volatile u32 l2siz_field = (l2cache->l2ctl >> 28) & 0x3; 222 u32 ver = SVR_SOC_VER(get_svr()); 223 224 switch (l2siz_field) { 225 case 0x0: 226 break; 227 case 0x1: 228 if (ver == SVR_8540 || ver == SVR_8560 || 229 ver == SVR_8541 || ver == SVR_8555) 230 return 128; 231 else 232 return 256; 233 break; 234 case 0x2: 235 if (ver == SVR_8540 || ver == SVR_8560 || 236 ver == SVR_8541 || ver == SVR_8555) 237 return 256; 238 else 239 return 512; 240 break; 241 case 0x3: 242 return 1024; 243 break; 244 } 245 246 return 0; 247 } 248 249 static inline void ft_fixup_l2cache(void *blob) 250 { 251 int off; 252 u32 *ph; 253 254 const u32 line_size = 32; 255 const u32 num_ways = 8; 256 const u32 size = l2cache_size() * 1024; 257 const u32 num_sets = size / (line_size * num_ways); 258 259 off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4); 260 if (off < 0) { 261 debug("no cpu node fount\n"); 262 return; 263 } 264 265 ph = (u32 *)fdt_getprop(blob, off, "next-level-cache", 0); 266 267 if (ph == NULL) { 268 debug("no next-level-cache property\n"); 269 return ; 270 } 271 272 off = fdt_node_offset_by_phandle(blob, *ph); 273 if (off < 0) { 274 printf("%s: %s\n", __func__, fdt_strerror(off)); 275 return ; 276 } 277 278 ft_fixup_l2cache_compatible(blob, off); 279 fdt_setprop(blob, off, "cache-unified", NULL, 0); 280 fdt_setprop_cell(blob, off, "cache-block-size", line_size); 281 fdt_setprop_cell(blob, off, "cache-size", size); 282 fdt_setprop_cell(blob, off, "cache-sets", num_sets); 283 fdt_setprop_cell(blob, off, "cache-level", 2); 284 285 /* we dont bother w/L3 since no platform of this type has one */ 286 } 287 #elif defined(CONFIG_BACKSIDE_L2_CACHE) || \ 288 defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2) 289 static inline void ft_fixup_l2cache(void *blob) 290 { 291 int off, l2_off, l3_off = -1; 292 u32 *ph; 293 #ifdef CONFIG_BACKSIDE_L2_CACHE 294 u32 l2cfg0 = mfspr(SPRN_L2CFG0); 295 #else 296 struct ccsr_cluster_l2 *l2cache = 297 (struct ccsr_cluster_l2 __iomem *)(CONFIG_SYS_FSL_CLUSTER_1_L2); 298 u32 l2cfg0 = in_be32(&l2cache->l2cfg0); 299 #endif 300 u32 size, line_size, num_ways, num_sets; 301 int has_l2 = 1; 302 303 /* P2040/P2040E has no L2, so dont set any L2 props */ 304 if (SVR_SOC_VER(get_svr()) == SVR_P2040) 305 has_l2 = 0; 306 307 size = (l2cfg0 & 0x3fff) * 64 * 1024; 308 num_ways = ((l2cfg0 >> 14) & 0x1f) + 1; 309 line_size = (((l2cfg0 >> 23) & 0x3) + 1) * 32; 310 num_sets = size / (line_size * num_ways); 311 312 off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4); 313 314 while (off != -FDT_ERR_NOTFOUND) { 315 ph = (u32 *)fdt_getprop(blob, off, "next-level-cache", 0); 316 317 if (ph == NULL) { 318 debug("no next-level-cache property\n"); 319 goto next; 320 } 321 322 l2_off = fdt_node_offset_by_phandle(blob, *ph); 323 if (l2_off < 0) { 324 printf("%s: %s\n", __func__, fdt_strerror(off)); 325 goto next; 326 } 327 328 if (has_l2) { 329 #ifdef CONFIG_SYS_CACHE_STASHING 330 u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", 0); 331 #if defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2) && defined(CONFIG_E6500) 332 /* Only initialize every eighth thread */ 333 if (reg && !((*reg) % 8)) { 334 fdt_setprop_cell(blob, l2_off, "cache-stash-id", 335 (*reg / 4) + 32 + 1); 336 } 337 #else 338 if (reg) { 339 fdt_setprop_cell(blob, l2_off, "cache-stash-id", 340 (*reg * 2) + 32 + 1); 341 } 342 #endif 343 #endif 344 345 fdt_setprop(blob, l2_off, "cache-unified", NULL, 0); 346 fdt_setprop_cell(blob, l2_off, "cache-block-size", 347 line_size); 348 fdt_setprop_cell(blob, l2_off, "cache-size", size); 349 fdt_setprop_cell(blob, l2_off, "cache-sets", num_sets); 350 fdt_setprop_cell(blob, l2_off, "cache-level", 2); 351 ft_fixup_l2cache_compatible(blob, l2_off); 352 } 353 354 if (l3_off < 0) { 355 ph = (u32 *)fdt_getprop(blob, l2_off, "next-level-cache", 0); 356 357 if (ph == NULL) { 358 debug("no next-level-cache property\n"); 359 goto next; 360 } 361 l3_off = *ph; 362 } 363 next: 364 off = fdt_node_offset_by_prop_value(blob, off, 365 "device_type", "cpu", 4); 366 } 367 if (l3_off > 0) { 368 l3_off = fdt_node_offset_by_phandle(blob, l3_off); 369 if (l3_off < 0) { 370 printf("%s: %s\n", __func__, fdt_strerror(off)); 371 return ; 372 } 373 ft_fixup_l3cache(blob, l3_off); 374 } 375 } 376 #else 377 #define ft_fixup_l2cache(x) 378 #endif 379 380 static inline void ft_fixup_cache(void *blob) 381 { 382 int off; 383 384 off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4); 385 386 while (off != -FDT_ERR_NOTFOUND) { 387 u32 l1cfg0 = mfspr(SPRN_L1CFG0); 388 u32 l1cfg1 = mfspr(SPRN_L1CFG1); 389 u32 isize, iline_size, inum_sets, inum_ways; 390 u32 dsize, dline_size, dnum_sets, dnum_ways; 391 392 /* d-side config */ 393 dsize = (l1cfg0 & 0x7ff) * 1024; 394 dnum_ways = ((l1cfg0 >> 11) & 0xff) + 1; 395 dline_size = (((l1cfg0 >> 23) & 0x3) + 1) * 32; 396 dnum_sets = dsize / (dline_size * dnum_ways); 397 398 fdt_setprop_cell(blob, off, "d-cache-block-size", dline_size); 399 fdt_setprop_cell(blob, off, "d-cache-size", dsize); 400 fdt_setprop_cell(blob, off, "d-cache-sets", dnum_sets); 401 402 #ifdef CONFIG_SYS_CACHE_STASHING 403 { 404 u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", 0); 405 if (reg) 406 fdt_setprop_cell(blob, off, "cache-stash-id", 407 (*reg * 2) + 32 + 0); 408 } 409 #endif 410 411 /* i-side config */ 412 isize = (l1cfg1 & 0x7ff) * 1024; 413 inum_ways = ((l1cfg1 >> 11) & 0xff) + 1; 414 iline_size = (((l1cfg1 >> 23) & 0x3) + 1) * 32; 415 inum_sets = isize / (iline_size * inum_ways); 416 417 fdt_setprop_cell(blob, off, "i-cache-block-size", iline_size); 418 fdt_setprop_cell(blob, off, "i-cache-size", isize); 419 fdt_setprop_cell(blob, off, "i-cache-sets", inum_sets); 420 421 off = fdt_node_offset_by_prop_value(blob, off, 422 "device_type", "cpu", 4); 423 } 424 425 ft_fixup_l2cache(blob); 426 } 427 428 429 void fdt_add_enet_stashing(void *fdt) 430 { 431 do_fixup_by_compat(fdt, "gianfar", "bd-stash", NULL, 0, 1); 432 433 do_fixup_by_compat_u32(fdt, "gianfar", "rx-stash-len", 96, 1); 434 435 do_fixup_by_compat_u32(fdt, "gianfar", "rx-stash-idx", 0, 1); 436 do_fixup_by_compat(fdt, "fsl,etsec2", "bd-stash", NULL, 0, 1); 437 do_fixup_by_compat_u32(fdt, "fsl,etsec2", "rx-stash-len", 96, 1); 438 do_fixup_by_compat_u32(fdt, "fsl,etsec2", "rx-stash-idx", 0, 1); 439 } 440 441 #if defined(CONFIG_SYS_DPAA_FMAN) || defined(CONFIG_SYS_DPAA_PME) 442 #ifdef CONFIG_SYS_DPAA_FMAN 443 static void ft_fixup_clks(void *blob, const char *compat, u32 offset, 444 unsigned long freq) 445 { 446 phys_addr_t phys = offset + CONFIG_SYS_CCSRBAR_PHYS; 447 int off = fdt_node_offset_by_compat_reg(blob, compat, phys); 448 449 if (off >= 0) { 450 off = fdt_setprop_cell(blob, off, "clock-frequency", freq); 451 if (off > 0) 452 printf("WARNING enable to set clock-frequency " 453 "for %s: %s\n", compat, fdt_strerror(off)); 454 } 455 } 456 #endif 457 458 static void ft_fixup_dpaa_clks(void *blob) 459 { 460 sys_info_t sysinfo; 461 462 get_sys_info(&sysinfo); 463 #ifdef CONFIG_SYS_DPAA_FMAN 464 ft_fixup_clks(blob, "fsl,fman", CONFIG_SYS_FSL_FM1_OFFSET, 465 sysinfo.freq_fman[0]); 466 467 #if (CONFIG_SYS_NUM_FMAN == 2) 468 ft_fixup_clks(blob, "fsl,fman", CONFIG_SYS_FSL_FM2_OFFSET, 469 sysinfo.freq_fman[1]); 470 #endif 471 #endif 472 473 #ifdef CONFIG_SYS_DPAA_QBMAN 474 do_fixup_by_compat_u32(blob, "fsl,qman", 475 "clock-frequency", sysinfo.freq_qman, 1); 476 #endif 477 478 #ifdef CONFIG_SYS_DPAA_PME 479 do_fixup_by_compat_u32(blob, "fsl,pme", 480 "clock-frequency", sysinfo.freq_pme, 1); 481 #endif 482 } 483 #else 484 #define ft_fixup_dpaa_clks(x) 485 #endif 486 487 #ifdef CONFIG_QE 488 static void ft_fixup_qe_snum(void *blob) 489 { 490 unsigned int svr; 491 492 svr = mfspr(SPRN_SVR); 493 if (SVR_SOC_VER(svr) == SVR_8569) { 494 if(IS_SVR_REV(svr, 1, 0)) 495 do_fixup_by_compat_u32(blob, "fsl,qe", 496 "fsl,qe-num-snums", 46, 1); 497 else 498 do_fixup_by_compat_u32(blob, "fsl,qe", 499 "fsl,qe-num-snums", 76, 1); 500 } 501 } 502 #endif 503 504 #if defined(CONFIG_ARCH_P4080) 505 static void fdt_fixup_usb(void *fdt) 506 { 507 ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); 508 u32 rcwsr11 = in_be32(&gur->rcwsr[11]); 509 int off; 510 511 off = fdt_node_offset_by_compatible(fdt, -1, "fsl,mpc85xx-usb2-mph"); 512 if ((rcwsr11 & FSL_CORENET_RCWSR11_EC1) != 513 FSL_CORENET_RCWSR11_EC1_FM1_USB1) 514 fdt_status_disabled(fdt, off); 515 516 off = fdt_node_offset_by_compatible(fdt, -1, "fsl,mpc85xx-usb2-dr"); 517 if ((rcwsr11 & FSL_CORENET_RCWSR11_EC2) != 518 FSL_CORENET_RCWSR11_EC2_USB2) 519 fdt_status_disabled(fdt, off); 520 } 521 #else 522 #define fdt_fixup_usb(x) 523 #endif 524 525 #if defined(CONFIG_ARCH_T2080) || defined(CONFIG_ARCH_T4240) || \ 526 defined(CONFIG_ARCH_T4160) 527 void fdt_fixup_dma3(void *blob) 528 { 529 /* the 3rd DMA is not functional if SRIO2 is chosen */ 530 int nodeoff; 531 ccsr_gur_t __iomem *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); 532 533 #define CONFIG_SYS_ELO3_DMA3 (0xffe000000 + 0x102300) 534 #if defined(CONFIG_ARCH_T2080) 535 u32 srds_prtcl_s2 = in_be32(&gur->rcwsr[4]) & 536 FSL_CORENET2_RCWSR4_SRDS2_PRTCL; 537 srds_prtcl_s2 >>= FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT; 538 539 switch (srds_prtcl_s2) { 540 case 0x29: 541 case 0x2d: 542 case 0x2e: 543 #elif defined(CONFIG_ARCH_T4240) || defined(CONFIG_ARCH_T4160) 544 u32 srds_prtcl_s4 = in_be32(&gur->rcwsr[4]) & 545 FSL_CORENET2_RCWSR4_SRDS4_PRTCL; 546 srds_prtcl_s4 >>= FSL_CORENET2_RCWSR4_SRDS4_PRTCL_SHIFT; 547 548 switch (srds_prtcl_s4) { 549 case 6: 550 case 8: 551 case 14: 552 case 16: 553 #endif 554 nodeoff = fdt_node_offset_by_compat_reg(blob, "fsl,elo3-dma", 555 CONFIG_SYS_ELO3_DMA3); 556 if (nodeoff > 0) 557 fdt_status_disabled(blob, nodeoff); 558 else 559 printf("WARNING: unable to disable dma3\n"); 560 break; 561 default: 562 break; 563 } 564 } 565 #else 566 #define fdt_fixup_dma3(x) 567 #endif 568 569 #if defined(CONFIG_ARCH_T1040) 570 static void fdt_fixup_l2_switch(void *blob) 571 { 572 uchar l2swaddr[6]; 573 int node; 574 575 /* The l2switch node from device-tree has 576 * compatible string "vitesse-9953" */ 577 node = fdt_node_offset_by_compatible(blob, -1, "vitesse-9953"); 578 if (node == -FDT_ERR_NOTFOUND) 579 /* no l2switch node has been found */ 580 return; 581 582 /* Get MAC address for the l2switch from "l2switchaddr"*/ 583 if (!eth_getenv_enetaddr("l2switchaddr", l2swaddr)) { 584 printf("Warning: MAC address for l2switch not found\n"); 585 memset(l2swaddr, 0, sizeof(l2swaddr)); 586 } 587 588 /* Add MAC address to l2switch node */ 589 fdt_setprop(blob, node, "local-mac-address", l2swaddr, 590 sizeof(l2swaddr)); 591 } 592 #else 593 #define fdt_fixup_l2_switch(x) 594 #endif 595 596 void ft_cpu_setup(void *blob, bd_t *bd) 597 { 598 int off; 599 int val; 600 int len; 601 sys_info_t sysinfo; 602 603 /* delete crypto node if not on an E-processor */ 604 if (!IS_E_PROCESSOR(get_svr())) 605 fdt_fixup_crypto_node(blob, 0); 606 #if CONFIG_SYS_FSL_SEC_COMPAT >= 4 607 else { 608 ccsr_sec_t __iomem *sec; 609 610 sec = (void __iomem *)CONFIG_SYS_FSL_SEC_ADDR; 611 fdt_fixup_crypto_node(blob, sec_in32(&sec->secvid_ms)); 612 } 613 #endif 614 615 fdt_add_enet_stashing(blob); 616 617 #ifndef CONFIG_FSL_TBCLK_EXTRA_DIV 618 #define CONFIG_FSL_TBCLK_EXTRA_DIV 1 619 #endif 620 do_fixup_by_prop_u32(blob, "device_type", "cpu", 4, 621 "timebase-frequency", get_tbclk() / CONFIG_FSL_TBCLK_EXTRA_DIV, 622 1); 623 do_fixup_by_prop_u32(blob, "device_type", "cpu", 4, 624 "bus-frequency", bd->bi_busfreq, 1); 625 get_sys_info(&sysinfo); 626 off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4); 627 while (off != -FDT_ERR_NOTFOUND) { 628 u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", &len); 629 val = cpu_to_fdt32(sysinfo.freq_processor[(*reg) / (len / 4)]); 630 fdt_setprop(blob, off, "clock-frequency", &val, 4); 631 off = fdt_node_offset_by_prop_value(blob, off, "device_type", 632 "cpu", 4); 633 } 634 do_fixup_by_prop_u32(blob, "device_type", "soc", 4, 635 "bus-frequency", bd->bi_busfreq, 1); 636 637 #ifdef CONFIG_QE 638 ft_qe_setup(blob); 639 ft_fixup_qe_snum(blob); 640 #endif 641 642 #ifdef CONFIG_SYS_DPAA_FMAN 643 fdt_fixup_fman_firmware(blob); 644 #endif 645 646 #ifdef CONFIG_SYS_NS16550 647 do_fixup_by_compat_u32(blob, "ns16550", 648 "clock-frequency", CONFIG_SYS_NS16550_CLK, 1); 649 #endif 650 651 #ifdef CONFIG_CPM2 652 do_fixup_by_compat_u32(blob, "fsl,cpm2-scc-uart", 653 "current-speed", gd->baudrate, 1); 654 655 do_fixup_by_compat_u32(blob, "fsl,cpm2-brg", 656 "clock-frequency", bd->bi_brgfreq, 1); 657 #endif 658 659 #ifdef CONFIG_FSL_CORENET 660 do_fixup_by_compat_u32(blob, "fsl,qoriq-clockgen-1.0", 661 "clock-frequency", CONFIG_SYS_CLK_FREQ, 1); 662 do_fixup_by_compat_u32(blob, "fsl,qoriq-clockgen-2.0", 663 "clock-frequency", CONFIG_SYS_CLK_FREQ, 1); 664 do_fixup_by_compat_u32(blob, "fsl,mpic", 665 "clock-frequency", get_bus_freq(0)/2, 1); 666 #else 667 do_fixup_by_compat_u32(blob, "fsl,mpic", 668 "clock-frequency", get_bus_freq(0), 1); 669 #endif 670 671 fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize); 672 673 #ifdef CONFIG_MP 674 ft_fixup_cpu(blob, (u64)bd->bi_memstart + (u64)bd->bi_memsize); 675 ft_fixup_num_cores(blob); 676 #endif 677 678 ft_fixup_cache(blob); 679 680 #if defined(CONFIG_FSL_ESDHC) 681 fdt_fixup_esdhc(blob, bd); 682 #endif 683 684 ft_fixup_dpaa_clks(blob); 685 686 #if defined(CONFIG_SYS_BMAN_MEM_PHYS) 687 fdt_portal(blob, "fsl,bman-portal", "bman-portals", 688 (u64)CONFIG_SYS_BMAN_MEM_PHYS, 689 CONFIG_SYS_BMAN_MEM_SIZE); 690 fdt_fixup_bportals(blob); 691 #endif 692 693 #if defined(CONFIG_SYS_QMAN_MEM_PHYS) 694 fdt_portal(blob, "fsl,qman-portal", "qman-portals", 695 (u64)CONFIG_SYS_QMAN_MEM_PHYS, 696 CONFIG_SYS_QMAN_MEM_SIZE); 697 698 fdt_fixup_qportals(blob); 699 #endif 700 701 #ifdef CONFIG_SYS_SRIO 702 ft_srio_setup(blob); 703 #endif 704 705 /* 706 * system-clock = CCB clock/2 707 * Here gd->bus_clk = CCB clock 708 * We are using the system clock as 1588 Timer reference 709 * clock source select 710 */ 711 do_fixup_by_compat_u32(blob, "fsl,gianfar-ptp-timer", 712 "timer-frequency", gd->bus_clk/2, 1); 713 714 /* 715 * clock-freq should change to clock-frequency and 716 * flexcan-v1.0 should change to p1010-flexcan respectively 717 * in the future. 718 */ 719 do_fixup_by_compat_u32(blob, "fsl,flexcan-v1.0", 720 "clock_freq", gd->bus_clk/2, 1); 721 722 do_fixup_by_compat_u32(blob, "fsl,flexcan-v1.0", 723 "clock-frequency", gd->bus_clk/2, 1); 724 725 do_fixup_by_compat_u32(blob, "fsl,p1010-flexcan", 726 "clock-frequency", gd->bus_clk/2, 1); 727 728 fdt_fixup_usb(blob); 729 730 fdt_fixup_l2_switch(blob); 731 732 fdt_fixup_dma3(blob); 733 } 734 735 /* 736 * For some CCSR devices, we only have the virtual address, not the physical 737 * address. This is because we map CCSR as a whole, so we typically don't need 738 * a macro for the physical address of any device within CCSR. In this case, 739 * we calculate the physical address of that device using it's the difference 740 * between the virtual address of the device and the virtual address of the 741 * beginning of CCSR. 742 */ 743 #define CCSR_VIRT_TO_PHYS(x) \ 744 (CONFIG_SYS_CCSRBAR_PHYS + ((x) - CONFIG_SYS_CCSRBAR)) 745 746 static void msg(const char *name, uint64_t uaddr, uint64_t daddr) 747 { 748 printf("Warning: U-Boot configured %s at address %llx,\n" 749 "but the device tree has it at %llx\n", name, uaddr, daddr); 750 } 751 752 /* 753 * Verify the device tree 754 * 755 * This function compares several CONFIG_xxx macros that contain physical 756 * addresses with the corresponding nodes in the device tree, to see if 757 * the physical addresses are all correct. For example, if 758 * CONFIG_SYS_NS16550_COM1 is defined, then it contains the virtual address 759 * of the first UART. We convert this to a physical address and compare 760 * that with the physical address of the first ns16550-compatible node 761 * in the device tree. If they don't match, then we display a warning. 762 * 763 * Returns 1 on success, 0 on failure 764 */ 765 int ft_verify_fdt(void *fdt) 766 { 767 uint64_t addr = 0; 768 int aliases; 769 int off; 770 771 /* First check the CCSR base address */ 772 off = fdt_node_offset_by_prop_value(fdt, -1, "device_type", "soc", 4); 773 if (off > 0) { 774 int size; 775 u32 naddr; 776 const fdt32_t *prop; 777 778 naddr = fdt_address_cells(fdt, off); 779 prop = fdt_getprop(fdt, off, "ranges", &size); 780 addr = fdt_translate_address(fdt, off, prop + naddr); 781 } 782 783 if (!addr) { 784 printf("Warning: could not determine base CCSR address in " 785 "device tree\n"); 786 /* No point in checking anything else */ 787 return 0; 788 } 789 790 if (addr != CONFIG_SYS_CCSRBAR_PHYS) { 791 msg("CCSR", CONFIG_SYS_CCSRBAR_PHYS, addr); 792 /* No point in checking anything else */ 793 return 0; 794 } 795 796 /* 797 * Check some nodes via aliases. We assume that U-Boot and the device 798 * tree enumerate the devices equally. E.g. the first serial port in 799 * U-Boot is the same as "serial0" in the device tree. 800 */ 801 aliases = fdt_path_offset(fdt, "/aliases"); 802 if (aliases > 0) { 803 #ifdef CONFIG_SYS_NS16550_COM1 804 if (!fdt_verify_alias_address(fdt, aliases, "serial0", 805 CCSR_VIRT_TO_PHYS(CONFIG_SYS_NS16550_COM1))) 806 return 0; 807 #endif 808 809 #ifdef CONFIG_SYS_NS16550_COM2 810 if (!fdt_verify_alias_address(fdt, aliases, "serial1", 811 CCSR_VIRT_TO_PHYS(CONFIG_SYS_NS16550_COM2))) 812 return 0; 813 #endif 814 } 815 816 /* 817 * The localbus node is typically a root node, even though the lbc 818 * controller is part of CCSR. If we were to put the lbc node under 819 * the SOC node, then the 'ranges' property in the lbc node would 820 * translate through the 'ranges' property of the parent SOC node, and 821 * we don't want that. Since it's a separate node, it's possible for 822 * the 'reg' property to be wrong, so check it here. For now, we 823 * only check for "fsl,elbc" nodes. 824 */ 825 #ifdef CONFIG_SYS_LBC_ADDR 826 off = fdt_node_offset_by_compatible(fdt, -1, "fsl,elbc"); 827 if (off > 0) { 828 const fdt32_t *reg = fdt_getprop(fdt, off, "reg", NULL); 829 if (reg) { 830 uint64_t uaddr = CCSR_VIRT_TO_PHYS(CONFIG_SYS_LBC_ADDR); 831 832 addr = fdt_translate_address(fdt, off, reg); 833 if (uaddr != addr) { 834 msg("the localbus", uaddr, addr); 835 return 0; 836 } 837 } 838 } 839 #endif 840 841 return 1; 842 } 843 844 void fdt_del_diu(void *blob) 845 { 846 int nodeoff = 0; 847 848 while ((nodeoff = fdt_node_offset_by_compatible(blob, 0, 849 "fsl,diu")) >= 0) { 850 fdt_del_node(blob, nodeoff); 851 } 852 } 853