1 /* 2 * Copyright 2007-2011 Freescale Semiconductor, Inc. 3 * 4 * (C) Copyright 2000 5 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. 6 * 7 * SPDX-License-Identifier: GPL-2.0+ 8 */ 9 10 #include <common.h> 11 #include <linux/libfdt.h> 12 #include <fdt_support.h> 13 #include <asm/processor.h> 14 #include <linux/ctype.h> 15 #include <asm/io.h> 16 #include <asm/fsl_fdt.h> 17 #include <asm/fsl_portals.h> 18 #include <fsl_qbman.h> 19 #include <hwconfig.h> 20 #ifdef CONFIG_FSL_ESDHC 21 #include <fsl_esdhc.h> 22 #endif 23 #ifdef CONFIG_SYS_DPAA_FMAN 24 #include <fsl_fman.h> 25 #endif 26 27 DECLARE_GLOBAL_DATA_PTR; 28 29 extern void ft_qe_setup(void *blob); 30 extern void ft_fixup_num_cores(void *blob); 31 extern void ft_srio_setup(void *blob); 32 33 #ifdef CONFIG_MP 34 #include "mp.h" 35 36 void ft_fixup_cpu(void *blob, u64 memory_limit) 37 { 38 int off; 39 phys_addr_t spin_tbl_addr = get_spin_phys_addr(); 40 u32 bootpg = determine_mp_bootpg(NULL); 41 u32 id = get_my_id(); 42 const char *enable_method; 43 #if defined(T1040_TDM_QUIRK_CCSR_BASE) 44 int ret; 45 int tdm_hwconfig_enabled = 0; 46 char buffer[HWCONFIG_BUFFER_SIZE] = {0}; 47 #endif 48 49 off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4); 50 while (off != -FDT_ERR_NOTFOUND) { 51 u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", 0); 52 53 if (reg) { 54 u32 phys_cpu_id = thread_to_core(*reg); 55 u64 val = phys_cpu_id * SIZE_BOOT_ENTRY + spin_tbl_addr; 56 val = cpu_to_fdt64(val); 57 if (*reg == id) { 58 fdt_setprop_string(blob, off, "status", 59 "okay"); 60 } else { 61 fdt_setprop_string(blob, off, "status", 62 "disabled"); 63 } 64 65 if (hold_cores_in_reset(0)) { 66 #ifdef CONFIG_FSL_CORENET 67 /* Cores held in reset, use BRR to release */ 68 enable_method = "fsl,brr-holdoff"; 69 #else 70 /* Cores held in reset, use EEBPCR to release */ 71 enable_method = "fsl,eebpcr-holdoff"; 72 #endif 73 } else { 74 /* Cores out of reset and in a spin-loop */ 75 enable_method = "spin-table"; 76 77 fdt_setprop(blob, off, "cpu-release-addr", 78 &val, sizeof(val)); 79 } 80 81 fdt_setprop_string(blob, off, "enable-method", 82 enable_method); 83 } else { 84 printf ("cpu NULL\n"); 85 } 86 off = fdt_node_offset_by_prop_value(blob, off, 87 "device_type", "cpu", 4); 88 } 89 90 #if defined(T1040_TDM_QUIRK_CCSR_BASE) 91 #define CONFIG_MEM_HOLE_16M 0x1000000 92 /* 93 * Extract hwconfig from environment. 94 * Search for tdm entry in hwconfig. 95 */ 96 ret = env_get_f("hwconfig", buffer, sizeof(buffer)); 97 if (ret > 0) 98 tdm_hwconfig_enabled = hwconfig_f("tdm", buffer); 99 100 /* Reserve the memory hole created by TDM LAW, so OSes dont use it */ 101 if (tdm_hwconfig_enabled) { 102 off = fdt_add_mem_rsv(blob, T1040_TDM_QUIRK_CCSR_BASE, 103 CONFIG_MEM_HOLE_16M); 104 if (off < 0) 105 printf("Failed to reserve memory for tdm: %s\n", 106 fdt_strerror(off)); 107 } 108 #endif 109 110 /* Reserve the boot page so OSes dont use it */ 111 if ((u64)bootpg < memory_limit) { 112 off = fdt_add_mem_rsv(blob, bootpg, (u64)4096); 113 if (off < 0) 114 printf("Failed to reserve memory for bootpg: %s\n", 115 fdt_strerror(off)); 116 } 117 118 #ifndef CONFIG_MPC8xxx_DISABLE_BPTR 119 /* 120 * Reserve the default boot page so OSes dont use it. 121 * The default boot page is always mapped to bootpg above using 122 * boot page translation. 123 */ 124 if (0xfffff000ull < memory_limit) { 125 off = fdt_add_mem_rsv(blob, 0xfffff000ull, (u64)4096); 126 if (off < 0) { 127 printf("Failed to reserve memory for 0xfffff000: %s\n", 128 fdt_strerror(off)); 129 } 130 } 131 #endif 132 133 /* Reserve spin table page */ 134 if (spin_tbl_addr < memory_limit) { 135 off = fdt_add_mem_rsv(blob, 136 (spin_tbl_addr & ~0xffful), 4096); 137 if (off < 0) 138 printf("Failed to reserve memory for spin table: %s\n", 139 fdt_strerror(off)); 140 } 141 #ifdef CONFIG_DEEP_SLEEP 142 #ifdef CONFIG_SPL_MMC_BOOT 143 off = fdt_add_mem_rsv(blob, CONFIG_SYS_MMC_U_BOOT_START, 144 CONFIG_SYS_MMC_U_BOOT_SIZE); 145 if (off < 0) 146 printf("Failed to reserve memory for SD deep sleep: %s\n", 147 fdt_strerror(off)); 148 #elif defined(CONFIG_SPL_SPI_BOOT) 149 off = fdt_add_mem_rsv(blob, CONFIG_SYS_SPI_FLASH_U_BOOT_START, 150 CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE); 151 if (off < 0) 152 printf("Failed to reserve memory for SPI deep sleep: %s\n", 153 fdt_strerror(off)); 154 #endif 155 #endif 156 } 157 #endif 158 159 #ifdef CONFIG_SYS_FSL_CPC 160 static inline void ft_fixup_l3cache(void *blob, int off) 161 { 162 u32 line_size, num_ways, size, num_sets; 163 cpc_corenet_t *cpc = (void *)CONFIG_SYS_FSL_CPC_ADDR; 164 u32 cfg0 = in_be32(&cpc->cpccfg0); 165 166 size = CPC_CFG0_SZ_K(cfg0) * 1024 * CONFIG_SYS_NUM_CPC; 167 num_ways = CPC_CFG0_NUM_WAYS(cfg0); 168 line_size = CPC_CFG0_LINE_SZ(cfg0); 169 num_sets = size / (line_size * num_ways); 170 171 fdt_setprop(blob, off, "cache-unified", NULL, 0); 172 fdt_setprop_cell(blob, off, "cache-block-size", line_size); 173 fdt_setprop_cell(blob, off, "cache-size", size); 174 fdt_setprop_cell(blob, off, "cache-sets", num_sets); 175 fdt_setprop_cell(blob, off, "cache-level", 3); 176 #ifdef CONFIG_SYS_CACHE_STASHING 177 fdt_setprop_cell(blob, off, "cache-stash-id", 1); 178 #endif 179 } 180 #else 181 #define ft_fixup_l3cache(x, y) 182 #endif 183 184 #if defined(CONFIG_L2_CACHE) || \ 185 defined(CONFIG_BACKSIDE_L2_CACHE) || \ 186 defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2) 187 static inline void ft_fixup_l2cache_compatible(void *blob, int off) 188 { 189 int len; 190 struct cpu_type *cpu = identify_cpu(SVR_SOC_VER(get_svr())); 191 192 if (cpu) { 193 char buf[40]; 194 195 if (isdigit(cpu->name[0])) { 196 /* MPCxxxx, where xxxx == 4-digit number */ 197 len = sprintf(buf, "fsl,mpc%s-l2-cache-controller", 198 cpu->name) + 1; 199 } else { 200 /* Pxxxx or Txxxx, where xxxx == 4-digit number */ 201 len = sprintf(buf, "fsl,%c%s-l2-cache-controller", 202 tolower(cpu->name[0]), cpu->name + 1) + 1; 203 } 204 205 /* 206 * append "cache" after the NULL character that the previous 207 * sprintf wrote. This is how a device tree stores multiple 208 * strings in a property. 209 */ 210 len += sprintf(buf + len, "cache") + 1; 211 212 fdt_setprop(blob, off, "compatible", buf, len); 213 } 214 } 215 #endif 216 217 #if defined(CONFIG_L2_CACHE) 218 /* return size in kilobytes */ 219 static inline u32 l2cache_size(void) 220 { 221 volatile ccsr_l2cache_t *l2cache = (void *)CONFIG_SYS_MPC85xx_L2_ADDR; 222 volatile u32 l2siz_field = (l2cache->l2ctl >> 28) & 0x3; 223 u32 ver = SVR_SOC_VER(get_svr()); 224 225 switch (l2siz_field) { 226 case 0x0: 227 break; 228 case 0x1: 229 if (ver == SVR_8540 || ver == SVR_8560 || 230 ver == SVR_8541 || ver == SVR_8555) 231 return 128; 232 else 233 return 256; 234 break; 235 case 0x2: 236 if (ver == SVR_8540 || ver == SVR_8560 || 237 ver == SVR_8541 || ver == SVR_8555) 238 return 256; 239 else 240 return 512; 241 break; 242 case 0x3: 243 return 1024; 244 break; 245 } 246 247 return 0; 248 } 249 250 static inline void ft_fixup_l2cache(void *blob) 251 { 252 int off; 253 u32 *ph; 254 255 const u32 line_size = 32; 256 const u32 num_ways = 8; 257 const u32 size = l2cache_size() * 1024; 258 const u32 num_sets = size / (line_size * num_ways); 259 260 off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4); 261 if (off < 0) { 262 debug("no cpu node fount\n"); 263 return; 264 } 265 266 ph = (u32 *)fdt_getprop(blob, off, "next-level-cache", 0); 267 268 if (ph == NULL) { 269 debug("no next-level-cache property\n"); 270 return ; 271 } 272 273 off = fdt_node_offset_by_phandle(blob, *ph); 274 if (off < 0) { 275 printf("%s: %s\n", __func__, fdt_strerror(off)); 276 return ; 277 } 278 279 ft_fixup_l2cache_compatible(blob, off); 280 fdt_setprop(blob, off, "cache-unified", NULL, 0); 281 fdt_setprop_cell(blob, off, "cache-block-size", line_size); 282 fdt_setprop_cell(blob, off, "cache-size", size); 283 fdt_setprop_cell(blob, off, "cache-sets", num_sets); 284 fdt_setprop_cell(blob, off, "cache-level", 2); 285 286 /* we dont bother w/L3 since no platform of this type has one */ 287 } 288 #elif defined(CONFIG_BACKSIDE_L2_CACHE) || \ 289 defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2) 290 static inline void ft_fixup_l2cache(void *blob) 291 { 292 int off, l2_off, l3_off = -1; 293 u32 *ph; 294 #ifdef CONFIG_BACKSIDE_L2_CACHE 295 u32 l2cfg0 = mfspr(SPRN_L2CFG0); 296 #else 297 struct ccsr_cluster_l2 *l2cache = 298 (struct ccsr_cluster_l2 __iomem *)(CONFIG_SYS_FSL_CLUSTER_1_L2); 299 u32 l2cfg0 = in_be32(&l2cache->l2cfg0); 300 #endif 301 u32 size, line_size, num_ways, num_sets; 302 int has_l2 = 1; 303 304 /* P2040/P2040E has no L2, so dont set any L2 props */ 305 if (SVR_SOC_VER(get_svr()) == SVR_P2040) 306 has_l2 = 0; 307 308 size = (l2cfg0 & 0x3fff) * 64 * 1024; 309 num_ways = ((l2cfg0 >> 14) & 0x1f) + 1; 310 line_size = (((l2cfg0 >> 23) & 0x3) + 1) * 32; 311 num_sets = size / (line_size * num_ways); 312 313 off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4); 314 315 while (off != -FDT_ERR_NOTFOUND) { 316 ph = (u32 *)fdt_getprop(blob, off, "next-level-cache", 0); 317 318 if (ph == NULL) { 319 debug("no next-level-cache property\n"); 320 goto next; 321 } 322 323 l2_off = fdt_node_offset_by_phandle(blob, *ph); 324 if (l2_off < 0) { 325 printf("%s: %s\n", __func__, fdt_strerror(off)); 326 goto next; 327 } 328 329 if (has_l2) { 330 #ifdef CONFIG_SYS_CACHE_STASHING 331 u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", 0); 332 #if defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2) && defined(CONFIG_E6500) 333 /* Only initialize every eighth thread */ 334 if (reg && !((*reg) % 8)) { 335 fdt_setprop_cell(blob, l2_off, "cache-stash-id", 336 (*reg / 4) + 32 + 1); 337 } 338 #else 339 if (reg) { 340 fdt_setprop_cell(blob, l2_off, "cache-stash-id", 341 (*reg * 2) + 32 + 1); 342 } 343 #endif 344 #endif 345 346 fdt_setprop(blob, l2_off, "cache-unified", NULL, 0); 347 fdt_setprop_cell(blob, l2_off, "cache-block-size", 348 line_size); 349 fdt_setprop_cell(blob, l2_off, "cache-size", size); 350 fdt_setprop_cell(blob, l2_off, "cache-sets", num_sets); 351 fdt_setprop_cell(blob, l2_off, "cache-level", 2); 352 ft_fixup_l2cache_compatible(blob, l2_off); 353 } 354 355 if (l3_off < 0) { 356 ph = (u32 *)fdt_getprop(blob, l2_off, "next-level-cache", 0); 357 358 if (ph == NULL) { 359 debug("no next-level-cache property\n"); 360 goto next; 361 } 362 l3_off = *ph; 363 } 364 next: 365 off = fdt_node_offset_by_prop_value(blob, off, 366 "device_type", "cpu", 4); 367 } 368 if (l3_off > 0) { 369 l3_off = fdt_node_offset_by_phandle(blob, l3_off); 370 if (l3_off < 0) { 371 printf("%s: %s\n", __func__, fdt_strerror(off)); 372 return ; 373 } 374 ft_fixup_l3cache(blob, l3_off); 375 } 376 } 377 #else 378 #define ft_fixup_l2cache(x) 379 #endif 380 381 static inline void ft_fixup_cache(void *blob) 382 { 383 int off; 384 385 off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4); 386 387 while (off != -FDT_ERR_NOTFOUND) { 388 u32 l1cfg0 = mfspr(SPRN_L1CFG0); 389 u32 l1cfg1 = mfspr(SPRN_L1CFG1); 390 u32 isize, iline_size, inum_sets, inum_ways; 391 u32 dsize, dline_size, dnum_sets, dnum_ways; 392 393 /* d-side config */ 394 dsize = (l1cfg0 & 0x7ff) * 1024; 395 dnum_ways = ((l1cfg0 >> 11) & 0xff) + 1; 396 dline_size = (((l1cfg0 >> 23) & 0x3) + 1) * 32; 397 dnum_sets = dsize / (dline_size * dnum_ways); 398 399 fdt_setprop_cell(blob, off, "d-cache-block-size", dline_size); 400 fdt_setprop_cell(blob, off, "d-cache-size", dsize); 401 fdt_setprop_cell(blob, off, "d-cache-sets", dnum_sets); 402 403 #ifdef CONFIG_SYS_CACHE_STASHING 404 { 405 u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", 0); 406 if (reg) 407 fdt_setprop_cell(blob, off, "cache-stash-id", 408 (*reg * 2) + 32 + 0); 409 } 410 #endif 411 412 /* i-side config */ 413 isize = (l1cfg1 & 0x7ff) * 1024; 414 inum_ways = ((l1cfg1 >> 11) & 0xff) + 1; 415 iline_size = (((l1cfg1 >> 23) & 0x3) + 1) * 32; 416 inum_sets = isize / (iline_size * inum_ways); 417 418 fdt_setprop_cell(blob, off, "i-cache-block-size", iline_size); 419 fdt_setprop_cell(blob, off, "i-cache-size", isize); 420 fdt_setprop_cell(blob, off, "i-cache-sets", inum_sets); 421 422 off = fdt_node_offset_by_prop_value(blob, off, 423 "device_type", "cpu", 4); 424 } 425 426 ft_fixup_l2cache(blob); 427 } 428 429 430 void fdt_add_enet_stashing(void *fdt) 431 { 432 do_fixup_by_compat(fdt, "gianfar", "bd-stash", NULL, 0, 1); 433 434 do_fixup_by_compat_u32(fdt, "gianfar", "rx-stash-len", 96, 1); 435 436 do_fixup_by_compat_u32(fdt, "gianfar", "rx-stash-idx", 0, 1); 437 do_fixup_by_compat(fdt, "fsl,etsec2", "bd-stash", NULL, 0, 1); 438 do_fixup_by_compat_u32(fdt, "fsl,etsec2", "rx-stash-len", 96, 1); 439 do_fixup_by_compat_u32(fdt, "fsl,etsec2", "rx-stash-idx", 0, 1); 440 } 441 442 #if defined(CONFIG_SYS_DPAA_FMAN) || defined(CONFIG_SYS_DPAA_PME) 443 #ifdef CONFIG_SYS_DPAA_FMAN 444 static void ft_fixup_clks(void *blob, const char *compat, u32 offset, 445 unsigned long freq) 446 { 447 phys_addr_t phys = offset + CONFIG_SYS_CCSRBAR_PHYS; 448 int off = fdt_node_offset_by_compat_reg(blob, compat, phys); 449 450 if (off >= 0) { 451 off = fdt_setprop_cell(blob, off, "clock-frequency", freq); 452 if (off > 0) 453 printf("WARNING enable to set clock-frequency " 454 "for %s: %s\n", compat, fdt_strerror(off)); 455 } 456 } 457 #endif 458 459 static void ft_fixup_dpaa_clks(void *blob) 460 { 461 sys_info_t sysinfo; 462 463 get_sys_info(&sysinfo); 464 #ifdef CONFIG_SYS_DPAA_FMAN 465 ft_fixup_clks(blob, "fsl,fman", CONFIG_SYS_FSL_FM1_OFFSET, 466 sysinfo.freq_fman[0]); 467 468 #if (CONFIG_SYS_NUM_FMAN == 2) 469 ft_fixup_clks(blob, "fsl,fman", CONFIG_SYS_FSL_FM2_OFFSET, 470 sysinfo.freq_fman[1]); 471 #endif 472 #endif 473 474 #ifdef CONFIG_SYS_DPAA_QBMAN 475 do_fixup_by_compat_u32(blob, "fsl,qman", 476 "clock-frequency", sysinfo.freq_qman, 1); 477 #endif 478 479 #ifdef CONFIG_SYS_DPAA_PME 480 do_fixup_by_compat_u32(blob, "fsl,pme", 481 "clock-frequency", sysinfo.freq_pme, 1); 482 #endif 483 } 484 #else 485 #define ft_fixup_dpaa_clks(x) 486 #endif 487 488 #ifdef CONFIG_QE 489 static void ft_fixup_qe_snum(void *blob) 490 { 491 unsigned int svr; 492 493 svr = mfspr(SPRN_SVR); 494 if (SVR_SOC_VER(svr) == SVR_8569) { 495 if(IS_SVR_REV(svr, 1, 0)) 496 do_fixup_by_compat_u32(blob, "fsl,qe", 497 "fsl,qe-num-snums", 46, 1); 498 else 499 do_fixup_by_compat_u32(blob, "fsl,qe", 500 "fsl,qe-num-snums", 76, 1); 501 } 502 } 503 #endif 504 505 #if defined(CONFIG_ARCH_P4080) 506 static void fdt_fixup_usb(void *fdt) 507 { 508 ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); 509 u32 rcwsr11 = in_be32(&gur->rcwsr[11]); 510 int off; 511 512 off = fdt_node_offset_by_compatible(fdt, -1, "fsl,mpc85xx-usb2-mph"); 513 if ((rcwsr11 & FSL_CORENET_RCWSR11_EC1) != 514 FSL_CORENET_RCWSR11_EC1_FM1_USB1) 515 fdt_status_disabled(fdt, off); 516 517 off = fdt_node_offset_by_compatible(fdt, -1, "fsl,mpc85xx-usb2-dr"); 518 if ((rcwsr11 & FSL_CORENET_RCWSR11_EC2) != 519 FSL_CORENET_RCWSR11_EC2_USB2) 520 fdt_status_disabled(fdt, off); 521 } 522 #else 523 #define fdt_fixup_usb(x) 524 #endif 525 526 #if defined(CONFIG_ARCH_T2080) || defined(CONFIG_ARCH_T4240) || \ 527 defined(CONFIG_ARCH_T4160) 528 void fdt_fixup_dma3(void *blob) 529 { 530 /* the 3rd DMA is not functional if SRIO2 is chosen */ 531 int nodeoff; 532 ccsr_gur_t __iomem *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); 533 534 #define CONFIG_SYS_ELO3_DMA3 (0xffe000000 + 0x102300) 535 #if defined(CONFIG_ARCH_T2080) 536 u32 srds_prtcl_s2 = in_be32(&gur->rcwsr[4]) & 537 FSL_CORENET2_RCWSR4_SRDS2_PRTCL; 538 srds_prtcl_s2 >>= FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT; 539 540 switch (srds_prtcl_s2) { 541 case 0x29: 542 case 0x2d: 543 case 0x2e: 544 #elif defined(CONFIG_ARCH_T4240) || defined(CONFIG_ARCH_T4160) 545 u32 srds_prtcl_s4 = in_be32(&gur->rcwsr[4]) & 546 FSL_CORENET2_RCWSR4_SRDS4_PRTCL; 547 srds_prtcl_s4 >>= FSL_CORENET2_RCWSR4_SRDS4_PRTCL_SHIFT; 548 549 switch (srds_prtcl_s4) { 550 case 6: 551 case 8: 552 case 14: 553 case 16: 554 #endif 555 nodeoff = fdt_node_offset_by_compat_reg(blob, "fsl,elo3-dma", 556 CONFIG_SYS_ELO3_DMA3); 557 if (nodeoff > 0) 558 fdt_status_disabled(blob, nodeoff); 559 else 560 printf("WARNING: unable to disable dma3\n"); 561 break; 562 default: 563 break; 564 } 565 } 566 #else 567 #define fdt_fixup_dma3(x) 568 #endif 569 570 #if defined(CONFIG_ARCH_T1040) 571 static void fdt_fixup_l2_switch(void *blob) 572 { 573 uchar l2swaddr[6]; 574 int node; 575 576 /* The l2switch node from device-tree has 577 * compatible string "vitesse-9953" */ 578 node = fdt_node_offset_by_compatible(blob, -1, "vitesse-9953"); 579 if (node == -FDT_ERR_NOTFOUND) 580 /* no l2switch node has been found */ 581 return; 582 583 /* Get MAC address for the l2switch from "l2switchaddr"*/ 584 if (!eth_env_get_enetaddr("l2switchaddr", l2swaddr)) { 585 printf("Warning: MAC address for l2switch not found\n"); 586 memset(l2swaddr, 0, sizeof(l2swaddr)); 587 } 588 589 /* Add MAC address to l2switch node */ 590 fdt_setprop(blob, node, "local-mac-address", l2swaddr, 591 sizeof(l2swaddr)); 592 } 593 #else 594 #define fdt_fixup_l2_switch(x) 595 #endif 596 597 void ft_cpu_setup(void *blob, bd_t *bd) 598 { 599 int off; 600 int val; 601 int len; 602 sys_info_t sysinfo; 603 604 /* delete crypto node if not on an E-processor */ 605 if (!IS_E_PROCESSOR(get_svr())) 606 fdt_fixup_crypto_node(blob, 0); 607 #if CONFIG_SYS_FSL_SEC_COMPAT >= 4 608 else { 609 ccsr_sec_t __iomem *sec; 610 611 sec = (void __iomem *)CONFIG_SYS_FSL_SEC_ADDR; 612 fdt_fixup_crypto_node(blob, sec_in32(&sec->secvid_ms)); 613 } 614 #endif 615 616 fdt_add_enet_stashing(blob); 617 618 #ifndef CONFIG_FSL_TBCLK_EXTRA_DIV 619 #define CONFIG_FSL_TBCLK_EXTRA_DIV 1 620 #endif 621 do_fixup_by_prop_u32(blob, "device_type", "cpu", 4, 622 "timebase-frequency", get_tbclk() / CONFIG_FSL_TBCLK_EXTRA_DIV, 623 1); 624 do_fixup_by_prop_u32(blob, "device_type", "cpu", 4, 625 "bus-frequency", bd->bi_busfreq, 1); 626 get_sys_info(&sysinfo); 627 off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4); 628 while (off != -FDT_ERR_NOTFOUND) { 629 u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", &len); 630 val = cpu_to_fdt32(sysinfo.freq_processor[(*reg) / (len / 4)]); 631 fdt_setprop(blob, off, "clock-frequency", &val, 4); 632 off = fdt_node_offset_by_prop_value(blob, off, "device_type", 633 "cpu", 4); 634 } 635 do_fixup_by_prop_u32(blob, "device_type", "soc", 4, 636 "bus-frequency", bd->bi_busfreq, 1); 637 638 #ifdef CONFIG_QE 639 ft_qe_setup(blob); 640 ft_fixup_qe_snum(blob); 641 #endif 642 643 #ifdef CONFIG_SYS_DPAA_FMAN 644 fdt_fixup_fman_firmware(blob); 645 #endif 646 647 #ifdef CONFIG_SYS_NS16550 648 do_fixup_by_compat_u32(blob, "ns16550", 649 "clock-frequency", CONFIG_SYS_NS16550_CLK, 1); 650 #endif 651 652 #ifdef CONFIG_CPM2 653 do_fixup_by_compat_u32(blob, "fsl,cpm2-scc-uart", 654 "current-speed", gd->baudrate, 1); 655 656 do_fixup_by_compat_u32(blob, "fsl,cpm2-brg", 657 "clock-frequency", bd->bi_brgfreq, 1); 658 #endif 659 660 #ifdef CONFIG_FSL_CORENET 661 do_fixup_by_compat_u32(blob, "fsl,qoriq-clockgen-1.0", 662 "clock-frequency", CONFIG_SYS_CLK_FREQ, 1); 663 do_fixup_by_compat_u32(blob, "fsl,qoriq-clockgen-2.0", 664 "clock-frequency", CONFIG_SYS_CLK_FREQ, 1); 665 do_fixup_by_compat_u32(blob, "fsl,mpic", 666 "clock-frequency", get_bus_freq(0)/2, 1); 667 #else 668 do_fixup_by_compat_u32(blob, "fsl,mpic", 669 "clock-frequency", get_bus_freq(0), 1); 670 #endif 671 672 fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize); 673 674 #ifdef CONFIG_MP 675 ft_fixup_cpu(blob, (u64)bd->bi_memstart + (u64)bd->bi_memsize); 676 ft_fixup_num_cores(blob); 677 #endif 678 679 ft_fixup_cache(blob); 680 681 #if defined(CONFIG_FSL_ESDHC) 682 fdt_fixup_esdhc(blob, bd); 683 #endif 684 685 ft_fixup_dpaa_clks(blob); 686 687 #if defined(CONFIG_SYS_BMAN_MEM_PHYS) 688 fdt_portal(blob, "fsl,bman-portal", "bman-portals", 689 (u64)CONFIG_SYS_BMAN_MEM_PHYS, 690 CONFIG_SYS_BMAN_MEM_SIZE); 691 fdt_fixup_bportals(blob); 692 #endif 693 694 #if defined(CONFIG_SYS_QMAN_MEM_PHYS) 695 fdt_portal(blob, "fsl,qman-portal", "qman-portals", 696 (u64)CONFIG_SYS_QMAN_MEM_PHYS, 697 CONFIG_SYS_QMAN_MEM_SIZE); 698 699 fdt_fixup_qportals(blob); 700 #endif 701 702 #ifdef CONFIG_SYS_SRIO 703 ft_srio_setup(blob); 704 #endif 705 706 /* 707 * system-clock = CCB clock/2 708 * Here gd->bus_clk = CCB clock 709 * We are using the system clock as 1588 Timer reference 710 * clock source select 711 */ 712 do_fixup_by_compat_u32(blob, "fsl,gianfar-ptp-timer", 713 "timer-frequency", gd->bus_clk/2, 1); 714 715 /* 716 * clock-freq should change to clock-frequency and 717 * flexcan-v1.0 should change to p1010-flexcan respectively 718 * in the future. 719 */ 720 do_fixup_by_compat_u32(blob, "fsl,flexcan-v1.0", 721 "clock_freq", gd->bus_clk/2, 1); 722 723 do_fixup_by_compat_u32(blob, "fsl,flexcan-v1.0", 724 "clock-frequency", gd->bus_clk/2, 1); 725 726 do_fixup_by_compat_u32(blob, "fsl,p1010-flexcan", 727 "clock-frequency", gd->bus_clk/2, 1); 728 729 fdt_fixup_usb(blob); 730 731 fdt_fixup_l2_switch(blob); 732 733 fdt_fixup_dma3(blob); 734 } 735 736 /* 737 * For some CCSR devices, we only have the virtual address, not the physical 738 * address. This is because we map CCSR as a whole, so we typically don't need 739 * a macro for the physical address of any device within CCSR. In this case, 740 * we calculate the physical address of that device using it's the difference 741 * between the virtual address of the device and the virtual address of the 742 * beginning of CCSR. 743 */ 744 #define CCSR_VIRT_TO_PHYS(x) \ 745 (CONFIG_SYS_CCSRBAR_PHYS + ((x) - CONFIG_SYS_CCSRBAR)) 746 747 static void msg(const char *name, uint64_t uaddr, uint64_t daddr) 748 { 749 printf("Warning: U-Boot configured %s at address %llx,\n" 750 "but the device tree has it at %llx\n", name, uaddr, daddr); 751 } 752 753 /* 754 * Verify the device tree 755 * 756 * This function compares several CONFIG_xxx macros that contain physical 757 * addresses with the corresponding nodes in the device tree, to see if 758 * the physical addresses are all correct. For example, if 759 * CONFIG_SYS_NS16550_COM1 is defined, then it contains the virtual address 760 * of the first UART. We convert this to a physical address and compare 761 * that with the physical address of the first ns16550-compatible node 762 * in the device tree. If they don't match, then we display a warning. 763 * 764 * Returns 1 on success, 0 on failure 765 */ 766 int ft_verify_fdt(void *fdt) 767 { 768 uint64_t addr = 0; 769 int aliases; 770 int off; 771 772 /* First check the CCSR base address */ 773 off = fdt_node_offset_by_prop_value(fdt, -1, "device_type", "soc", 4); 774 if (off > 0) { 775 int size; 776 u32 naddr; 777 const fdt32_t *prop; 778 779 naddr = fdt_address_cells(fdt, off); 780 prop = fdt_getprop(fdt, off, "ranges", &size); 781 addr = fdt_translate_address(fdt, off, prop + naddr); 782 } 783 784 if (!addr) { 785 printf("Warning: could not determine base CCSR address in " 786 "device tree\n"); 787 /* No point in checking anything else */ 788 return 0; 789 } 790 791 if (addr != CONFIG_SYS_CCSRBAR_PHYS) { 792 msg("CCSR", CONFIG_SYS_CCSRBAR_PHYS, addr); 793 /* No point in checking anything else */ 794 return 0; 795 } 796 797 /* 798 * Check some nodes via aliases. We assume that U-Boot and the device 799 * tree enumerate the devices equally. E.g. the first serial port in 800 * U-Boot is the same as "serial0" in the device tree. 801 */ 802 aliases = fdt_path_offset(fdt, "/aliases"); 803 if (aliases > 0) { 804 #ifdef CONFIG_SYS_NS16550_COM1 805 if (!fdt_verify_alias_address(fdt, aliases, "serial0", 806 CCSR_VIRT_TO_PHYS(CONFIG_SYS_NS16550_COM1))) 807 return 0; 808 #endif 809 810 #ifdef CONFIG_SYS_NS16550_COM2 811 if (!fdt_verify_alias_address(fdt, aliases, "serial1", 812 CCSR_VIRT_TO_PHYS(CONFIG_SYS_NS16550_COM2))) 813 return 0; 814 #endif 815 } 816 817 /* 818 * The localbus node is typically a root node, even though the lbc 819 * controller is part of CCSR. If we were to put the lbc node under 820 * the SOC node, then the 'ranges' property in the lbc node would 821 * translate through the 'ranges' property of the parent SOC node, and 822 * we don't want that. Since it's a separate node, it's possible for 823 * the 'reg' property to be wrong, so check it here. For now, we 824 * only check for "fsl,elbc" nodes. 825 */ 826 #ifdef CONFIG_SYS_LBC_ADDR 827 off = fdt_node_offset_by_compatible(fdt, -1, "fsl,elbc"); 828 if (off > 0) { 829 const fdt32_t *reg = fdt_getprop(fdt, off, "reg", NULL); 830 if (reg) { 831 uint64_t uaddr = CCSR_VIRT_TO_PHYS(CONFIG_SYS_LBC_ADDR); 832 833 addr = fdt_translate_address(fdt, off, reg); 834 if (uaddr != addr) { 835 msg("the localbus", uaddr, addr); 836 return 0; 837 } 838 } 839 } 840 #endif 841 842 return 1; 843 } 844 845 void fdt_del_diu(void *blob) 846 { 847 int nodeoff = 0; 848 849 while ((nodeoff = fdt_node_offset_by_compatible(blob, 0, 850 "fsl,diu")) >= 0) { 851 fdt_del_node(blob, nodeoff); 852 } 853 } 854