1 /* 2 * Copyright 2007-2011 Freescale Semiconductor, Inc. 3 * 4 * (C) Copyright 2000 5 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. 6 * 7 * SPDX-License-Identifier: GPL-2.0+ 8 */ 9 10 #include <common.h> 11 #include <libfdt.h> 12 #include <fdt_support.h> 13 #include <asm/processor.h> 14 #include <linux/ctype.h> 15 #include <asm/io.h> 16 #include <asm/fsl_fdt.h> 17 #include <asm/fsl_portals.h> 18 #include <hwconfig.h> 19 #ifdef CONFIG_FSL_ESDHC 20 #include <fsl_esdhc.h> 21 #endif 22 #ifdef CONFIG_SYS_DPAA_FMAN 23 #include <fsl_fman.h> 24 #endif 25 26 DECLARE_GLOBAL_DATA_PTR; 27 28 extern void ft_qe_setup(void *blob); 29 extern void ft_fixup_num_cores(void *blob); 30 extern void ft_srio_setup(void *blob); 31 32 #ifdef CONFIG_MP 33 #include "mp.h" 34 35 void ft_fixup_cpu(void *blob, u64 memory_limit) 36 { 37 int off; 38 phys_addr_t spin_tbl_addr = get_spin_phys_addr(); 39 u32 bootpg = determine_mp_bootpg(NULL); 40 u32 id = get_my_id(); 41 const char *enable_method; 42 #if defined(T1040_TDM_QUIRK_CCSR_BASE) 43 int ret; 44 int tdm_hwconfig_enabled = 0; 45 char buffer[HWCONFIG_BUFFER_SIZE] = {0}; 46 #endif 47 48 off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4); 49 while (off != -FDT_ERR_NOTFOUND) { 50 u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", 0); 51 52 if (reg) { 53 u32 phys_cpu_id = thread_to_core(*reg); 54 u64 val = phys_cpu_id * SIZE_BOOT_ENTRY + spin_tbl_addr; 55 val = cpu_to_fdt64(val); 56 if (*reg == id) { 57 fdt_setprop_string(blob, off, "status", 58 "okay"); 59 } else { 60 fdt_setprop_string(blob, off, "status", 61 "disabled"); 62 } 63 64 if (hold_cores_in_reset(0)) { 65 #ifdef CONFIG_FSL_CORENET 66 /* Cores held in reset, use BRR to release */ 67 enable_method = "fsl,brr-holdoff"; 68 #else 69 /* Cores held in reset, use EEBPCR to release */ 70 enable_method = "fsl,eebpcr-holdoff"; 71 #endif 72 } else { 73 /* Cores out of reset and in a spin-loop */ 74 enable_method = "spin-table"; 75 76 fdt_setprop(blob, off, "cpu-release-addr", 77 &val, sizeof(val)); 78 } 79 80 fdt_setprop_string(blob, off, "enable-method", 81 enable_method); 82 } else { 83 printf ("cpu NULL\n"); 84 } 85 off = fdt_node_offset_by_prop_value(blob, off, 86 "device_type", "cpu", 4); 87 } 88 89 #if defined(T1040_TDM_QUIRK_CCSR_BASE) 90 #define CONFIG_MEM_HOLE_16M 0x1000000 91 /* 92 * Extract hwconfig from environment. 93 * Search for tdm entry in hwconfig. 94 */ 95 ret = getenv_f("hwconfig", buffer, sizeof(buffer)); 96 if (ret > 0) 97 tdm_hwconfig_enabled = hwconfig_f("tdm", buffer); 98 99 /* Reserve the memory hole created by TDM LAW, so OSes dont use it */ 100 if (tdm_hwconfig_enabled) { 101 off = fdt_add_mem_rsv(blob, T1040_TDM_QUIRK_CCSR_BASE, 102 CONFIG_MEM_HOLE_16M); 103 if (off < 0) 104 printf("Failed to reserve memory for tdm: %s\n", 105 fdt_strerror(off)); 106 } 107 #endif 108 109 /* Reserve the boot page so OSes dont use it */ 110 if ((u64)bootpg < memory_limit) { 111 off = fdt_add_mem_rsv(blob, bootpg, (u64)4096); 112 if (off < 0) 113 printf("Failed to reserve memory for bootpg: %s\n", 114 fdt_strerror(off)); 115 } 116 117 #ifndef CONFIG_MPC8xxx_DISABLE_BPTR 118 /* 119 * Reserve the default boot page so OSes dont use it. 120 * The default boot page is always mapped to bootpg above using 121 * boot page translation. 122 */ 123 if (0xfffff000ull < memory_limit) { 124 off = fdt_add_mem_rsv(blob, 0xfffff000ull, (u64)4096); 125 if (off < 0) { 126 printf("Failed to reserve memory for 0xfffff000: %s\n", 127 fdt_strerror(off)); 128 } 129 } 130 #endif 131 132 /* Reserve spin table page */ 133 if (spin_tbl_addr < memory_limit) { 134 off = fdt_add_mem_rsv(blob, 135 (spin_tbl_addr & ~0xffful), 4096); 136 if (off < 0) 137 printf("Failed to reserve memory for spin table: %s\n", 138 fdt_strerror(off)); 139 } 140 #ifdef CONFIG_DEEP_SLEEP 141 #ifdef CONFIG_SPL_MMC_BOOT 142 off = fdt_add_mem_rsv(blob, CONFIG_SYS_MMC_U_BOOT_START, 143 CONFIG_SYS_MMC_U_BOOT_SIZE); 144 if (off < 0) 145 printf("Failed to reserve memory for SD deep sleep: %s\n", 146 fdt_strerror(off)); 147 #elif defined(CONFIG_SPL_SPI_BOOT) 148 off = fdt_add_mem_rsv(blob, CONFIG_SYS_SPI_FLASH_U_BOOT_START, 149 CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE); 150 if (off < 0) 151 printf("Failed to reserve memory for SPI deep sleep: %s\n", 152 fdt_strerror(off)); 153 #endif 154 #endif 155 } 156 #endif 157 158 #ifdef CONFIG_SYS_FSL_CPC 159 static inline void ft_fixup_l3cache(void *blob, int off) 160 { 161 u32 line_size, num_ways, size, num_sets; 162 cpc_corenet_t *cpc = (void *)CONFIG_SYS_FSL_CPC_ADDR; 163 u32 cfg0 = in_be32(&cpc->cpccfg0); 164 165 size = CPC_CFG0_SZ_K(cfg0) * 1024 * CONFIG_SYS_NUM_CPC; 166 num_ways = CPC_CFG0_NUM_WAYS(cfg0); 167 line_size = CPC_CFG0_LINE_SZ(cfg0); 168 num_sets = size / (line_size * num_ways); 169 170 fdt_setprop(blob, off, "cache-unified", NULL, 0); 171 fdt_setprop_cell(blob, off, "cache-block-size", line_size); 172 fdt_setprop_cell(blob, off, "cache-size", size); 173 fdt_setprop_cell(blob, off, "cache-sets", num_sets); 174 fdt_setprop_cell(blob, off, "cache-level", 3); 175 #ifdef CONFIG_SYS_CACHE_STASHING 176 fdt_setprop_cell(blob, off, "cache-stash-id", 1); 177 #endif 178 } 179 #else 180 #define ft_fixup_l3cache(x, y) 181 #endif 182 183 #if defined(CONFIG_L2_CACHE) 184 /* return size in kilobytes */ 185 static inline u32 l2cache_size(void) 186 { 187 volatile ccsr_l2cache_t *l2cache = (void *)CONFIG_SYS_MPC85xx_L2_ADDR; 188 volatile u32 l2siz_field = (l2cache->l2ctl >> 28) & 0x3; 189 u32 ver = SVR_SOC_VER(get_svr()); 190 191 switch (l2siz_field) { 192 case 0x0: 193 break; 194 case 0x1: 195 if (ver == SVR_8540 || ver == SVR_8560 || 196 ver == SVR_8541 || ver == SVR_8555) 197 return 128; 198 else 199 return 256; 200 break; 201 case 0x2: 202 if (ver == SVR_8540 || ver == SVR_8560 || 203 ver == SVR_8541 || ver == SVR_8555) 204 return 256; 205 else 206 return 512; 207 break; 208 case 0x3: 209 return 1024; 210 break; 211 } 212 213 return 0; 214 } 215 216 static inline void ft_fixup_l2cache(void *blob) 217 { 218 int len, off; 219 u32 *ph; 220 struct cpu_type *cpu = identify_cpu(SVR_SOC_VER(get_svr())); 221 222 const u32 line_size = 32; 223 const u32 num_ways = 8; 224 const u32 size = l2cache_size() * 1024; 225 const u32 num_sets = size / (line_size * num_ways); 226 227 off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4); 228 if (off < 0) { 229 debug("no cpu node fount\n"); 230 return; 231 } 232 233 ph = (u32 *)fdt_getprop(blob, off, "next-level-cache", 0); 234 235 if (ph == NULL) { 236 debug("no next-level-cache property\n"); 237 return ; 238 } 239 240 off = fdt_node_offset_by_phandle(blob, *ph); 241 if (off < 0) { 242 printf("%s: %s\n", __func__, fdt_strerror(off)); 243 return ; 244 } 245 246 if (cpu) { 247 char buf[40]; 248 249 if (isdigit(cpu->name[0])) { 250 /* MPCxxxx, where xxxx == 4-digit number */ 251 len = sprintf(buf, "fsl,mpc%s-l2-cache-controller", 252 cpu->name) + 1; 253 } else { 254 /* Pxxxx or Txxxx, where xxxx == 4-digit number */ 255 len = sprintf(buf, "fsl,%c%s-l2-cache-controller", 256 tolower(cpu->name[0]), cpu->name + 1) + 1; 257 } 258 259 /* 260 * append "cache" after the NULL character that the previous 261 * sprintf wrote. This is how a device tree stores multiple 262 * strings in a property. 263 */ 264 len += sprintf(buf + len, "cache") + 1; 265 266 fdt_setprop(blob, off, "compatible", buf, len); 267 } 268 fdt_setprop(blob, off, "cache-unified", NULL, 0); 269 fdt_setprop_cell(blob, off, "cache-block-size", line_size); 270 fdt_setprop_cell(blob, off, "cache-size", size); 271 fdt_setprop_cell(blob, off, "cache-sets", num_sets); 272 fdt_setprop_cell(blob, off, "cache-level", 2); 273 274 /* we dont bother w/L3 since no platform of this type has one */ 275 } 276 #elif defined(CONFIG_BACKSIDE_L2_CACHE) || \ 277 defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2) 278 static inline void ft_fixup_l2cache(void *blob) 279 { 280 int off, l2_off, l3_off = -1; 281 u32 *ph; 282 #ifdef CONFIG_BACKSIDE_L2_CACHE 283 u32 l2cfg0 = mfspr(SPRN_L2CFG0); 284 #else 285 struct ccsr_cluster_l2 *l2cache = 286 (struct ccsr_cluster_l2 __iomem *)(CONFIG_SYS_FSL_CLUSTER_1_L2); 287 u32 l2cfg0 = in_be32(&l2cache->l2cfg0); 288 #endif 289 u32 size, line_size, num_ways, num_sets; 290 int has_l2 = 1; 291 292 /* P2040/P2040E has no L2, so dont set any L2 props */ 293 if (SVR_SOC_VER(get_svr()) == SVR_P2040) 294 has_l2 = 0; 295 296 size = (l2cfg0 & 0x3fff) * 64 * 1024; 297 num_ways = ((l2cfg0 >> 14) & 0x1f) + 1; 298 line_size = (((l2cfg0 >> 23) & 0x3) + 1) * 32; 299 num_sets = size / (line_size * num_ways); 300 301 off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4); 302 303 while (off != -FDT_ERR_NOTFOUND) { 304 ph = (u32 *)fdt_getprop(blob, off, "next-level-cache", 0); 305 306 if (ph == NULL) { 307 debug("no next-level-cache property\n"); 308 goto next; 309 } 310 311 l2_off = fdt_node_offset_by_phandle(blob, *ph); 312 if (l2_off < 0) { 313 printf("%s: %s\n", __func__, fdt_strerror(off)); 314 goto next; 315 } 316 317 if (has_l2) { 318 #ifdef CONFIG_SYS_CACHE_STASHING 319 u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", 0); 320 #if defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2) && defined(CONFIG_E6500) 321 /* Only initialize every eighth thread */ 322 if (reg && !((*reg) % 8)) { 323 fdt_setprop_cell(blob, l2_off, "cache-stash-id", 324 (*reg / 4) + 32 + 1); 325 } 326 #else 327 if (reg) { 328 fdt_setprop_cell(blob, l2_off, "cache-stash-id", 329 (*reg * 2) + 32 + 1); 330 } 331 #endif 332 #endif 333 334 fdt_setprop(blob, l2_off, "cache-unified", NULL, 0); 335 fdt_setprop_cell(blob, l2_off, "cache-block-size", 336 line_size); 337 fdt_setprop_cell(blob, l2_off, "cache-size", size); 338 fdt_setprop_cell(blob, l2_off, "cache-sets", num_sets); 339 fdt_setprop_cell(blob, l2_off, "cache-level", 2); 340 fdt_setprop(blob, l2_off, "compatible", "cache", 6); 341 } 342 343 if (l3_off < 0) { 344 ph = (u32 *)fdt_getprop(blob, l2_off, "next-level-cache", 0); 345 346 if (ph == NULL) { 347 debug("no next-level-cache property\n"); 348 goto next; 349 } 350 l3_off = *ph; 351 } 352 next: 353 off = fdt_node_offset_by_prop_value(blob, off, 354 "device_type", "cpu", 4); 355 } 356 if (l3_off > 0) { 357 l3_off = fdt_node_offset_by_phandle(blob, l3_off); 358 if (l3_off < 0) { 359 printf("%s: %s\n", __func__, fdt_strerror(off)); 360 return ; 361 } 362 ft_fixup_l3cache(blob, l3_off); 363 } 364 } 365 #else 366 #define ft_fixup_l2cache(x) 367 #endif 368 369 static inline void ft_fixup_cache(void *blob) 370 { 371 int off; 372 373 off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4); 374 375 while (off != -FDT_ERR_NOTFOUND) { 376 u32 l1cfg0 = mfspr(SPRN_L1CFG0); 377 u32 l1cfg1 = mfspr(SPRN_L1CFG1); 378 u32 isize, iline_size, inum_sets, inum_ways; 379 u32 dsize, dline_size, dnum_sets, dnum_ways; 380 381 /* d-side config */ 382 dsize = (l1cfg0 & 0x7ff) * 1024; 383 dnum_ways = ((l1cfg0 >> 11) & 0xff) + 1; 384 dline_size = (((l1cfg0 >> 23) & 0x3) + 1) * 32; 385 dnum_sets = dsize / (dline_size * dnum_ways); 386 387 fdt_setprop_cell(blob, off, "d-cache-block-size", dline_size); 388 fdt_setprop_cell(blob, off, "d-cache-size", dsize); 389 fdt_setprop_cell(blob, off, "d-cache-sets", dnum_sets); 390 391 #ifdef CONFIG_SYS_CACHE_STASHING 392 { 393 u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", 0); 394 if (reg) 395 fdt_setprop_cell(blob, off, "cache-stash-id", 396 (*reg * 2) + 32 + 0); 397 } 398 #endif 399 400 /* i-side config */ 401 isize = (l1cfg1 & 0x7ff) * 1024; 402 inum_ways = ((l1cfg1 >> 11) & 0xff) + 1; 403 iline_size = (((l1cfg1 >> 23) & 0x3) + 1) * 32; 404 inum_sets = isize / (iline_size * inum_ways); 405 406 fdt_setprop_cell(blob, off, "i-cache-block-size", iline_size); 407 fdt_setprop_cell(blob, off, "i-cache-size", isize); 408 fdt_setprop_cell(blob, off, "i-cache-sets", inum_sets); 409 410 off = fdt_node_offset_by_prop_value(blob, off, 411 "device_type", "cpu", 4); 412 } 413 414 ft_fixup_l2cache(blob); 415 } 416 417 418 void fdt_add_enet_stashing(void *fdt) 419 { 420 do_fixup_by_compat(fdt, "gianfar", "bd-stash", NULL, 0, 1); 421 422 do_fixup_by_compat_u32(fdt, "gianfar", "rx-stash-len", 96, 1); 423 424 do_fixup_by_compat_u32(fdt, "gianfar", "rx-stash-idx", 0, 1); 425 do_fixup_by_compat(fdt, "fsl,etsec2", "bd-stash", NULL, 0, 1); 426 do_fixup_by_compat_u32(fdt, "fsl,etsec2", "rx-stash-len", 96, 1); 427 do_fixup_by_compat_u32(fdt, "fsl,etsec2", "rx-stash-idx", 0, 1); 428 } 429 430 #if defined(CONFIG_SYS_DPAA_FMAN) || defined(CONFIG_SYS_DPAA_PME) 431 #ifdef CONFIG_SYS_DPAA_FMAN 432 static void ft_fixup_clks(void *blob, const char *compat, u32 offset, 433 unsigned long freq) 434 { 435 phys_addr_t phys = offset + CONFIG_SYS_CCSRBAR_PHYS; 436 int off = fdt_node_offset_by_compat_reg(blob, compat, phys); 437 438 if (off >= 0) { 439 off = fdt_setprop_cell(blob, off, "clock-frequency", freq); 440 if (off > 0) 441 printf("WARNING enable to set clock-frequency " 442 "for %s: %s\n", compat, fdt_strerror(off)); 443 } 444 } 445 #endif 446 447 static void ft_fixup_dpaa_clks(void *blob) 448 { 449 sys_info_t sysinfo; 450 451 get_sys_info(&sysinfo); 452 #ifdef CONFIG_SYS_DPAA_FMAN 453 ft_fixup_clks(blob, "fsl,fman", CONFIG_SYS_FSL_FM1_OFFSET, 454 sysinfo.freq_fman[0]); 455 456 #if (CONFIG_SYS_NUM_FMAN == 2) 457 ft_fixup_clks(blob, "fsl,fman", CONFIG_SYS_FSL_FM2_OFFSET, 458 sysinfo.freq_fman[1]); 459 #endif 460 #endif 461 462 #ifdef CONFIG_SYS_DPAA_QBMAN 463 do_fixup_by_compat_u32(blob, "fsl,qman", 464 "clock-frequency", sysinfo.freq_qman, 1); 465 #endif 466 467 #ifdef CONFIG_SYS_DPAA_PME 468 do_fixup_by_compat_u32(blob, "fsl,pme", 469 "clock-frequency", sysinfo.freq_pme, 1); 470 #endif 471 } 472 #else 473 #define ft_fixup_dpaa_clks(x) 474 #endif 475 476 #ifdef CONFIG_QE 477 static void ft_fixup_qe_snum(void *blob) 478 { 479 unsigned int svr; 480 481 svr = mfspr(SPRN_SVR); 482 if (SVR_SOC_VER(svr) == SVR_8569) { 483 if(IS_SVR_REV(svr, 1, 0)) 484 do_fixup_by_compat_u32(blob, "fsl,qe", 485 "fsl,qe-num-snums", 46, 1); 486 else 487 do_fixup_by_compat_u32(blob, "fsl,qe", 488 "fsl,qe-num-snums", 76, 1); 489 } 490 } 491 #endif 492 493 #if defined(CONFIG_PPC_P4080) 494 static void fdt_fixup_usb(void *fdt) 495 { 496 ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); 497 u32 rcwsr11 = in_be32(&gur->rcwsr[11]); 498 int off; 499 500 off = fdt_node_offset_by_compatible(fdt, -1, "fsl,mpc85xx-usb2-mph"); 501 if ((rcwsr11 & FSL_CORENET_RCWSR11_EC1) != 502 FSL_CORENET_RCWSR11_EC1_FM1_USB1) 503 fdt_status_disabled(fdt, off); 504 505 off = fdt_node_offset_by_compatible(fdt, -1, "fsl,mpc85xx-usb2-dr"); 506 if ((rcwsr11 & FSL_CORENET_RCWSR11_EC2) != 507 FSL_CORENET_RCWSR11_EC2_USB2) 508 fdt_status_disabled(fdt, off); 509 } 510 #else 511 #define fdt_fixup_usb(x) 512 #endif 513 514 #if defined(CONFIG_PPC_T2080) || defined(CONFIG_PPC_T4240) || \ 515 defined(CONFIG_PPC_T4160) || defined(CONFIG_PPC_T4080) 516 void fdt_fixup_dma3(void *blob) 517 { 518 /* the 3rd DMA is not functional if SRIO2 is chosen */ 519 int nodeoff; 520 ccsr_gur_t __iomem *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); 521 522 #define CONFIG_SYS_ELO3_DMA3 (0xffe000000 + 0x102300) 523 #if defined(CONFIG_PPC_T2080) 524 u32 srds_prtcl_s2 = in_be32(&gur->rcwsr[4]) & 525 FSL_CORENET2_RCWSR4_SRDS2_PRTCL; 526 srds_prtcl_s2 >>= FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT; 527 528 switch (srds_prtcl_s2) { 529 case 0x29: 530 case 0x2d: 531 case 0x2e: 532 #elif defined(CONFIG_PPC_T4240) || defined(CONFIG_PPC_T4160) || \ 533 defined(CONFIG_PPC_T4080) 534 u32 srds_prtcl_s4 = in_be32(&gur->rcwsr[4]) & 535 FSL_CORENET2_RCWSR4_SRDS4_PRTCL; 536 srds_prtcl_s4 >>= FSL_CORENET2_RCWSR4_SRDS4_PRTCL_SHIFT; 537 538 switch (srds_prtcl_s4) { 539 case 6: 540 case 8: 541 case 14: 542 case 16: 543 #endif 544 nodeoff = fdt_node_offset_by_compat_reg(blob, "fsl,elo3-dma", 545 CONFIG_SYS_ELO3_DMA3); 546 if (nodeoff > 0) 547 fdt_status_disabled(blob, nodeoff); 548 else 549 printf("WARNING: unable to disable dma3\n"); 550 break; 551 default: 552 break; 553 } 554 } 555 #else 556 #define fdt_fixup_dma3(x) 557 #endif 558 559 #if defined(CONFIG_PPC_T1040) 560 static void fdt_fixup_l2_switch(void *blob) 561 { 562 uchar l2swaddr[6]; 563 int node; 564 565 /* The l2switch node from device-tree has 566 * compatible string "vitesse-9953" */ 567 node = fdt_node_offset_by_compatible(blob, -1, "vitesse-9953"); 568 if (node == -FDT_ERR_NOTFOUND) 569 /* no l2switch node has been found */ 570 return; 571 572 /* Get MAC address for the l2switch from "l2switchaddr"*/ 573 if (!eth_getenv_enetaddr("l2switchaddr", l2swaddr)) { 574 printf("Warning: MAC address for l2switch not found\n"); 575 memset(l2swaddr, 0, sizeof(l2swaddr)); 576 } 577 578 /* Add MAC address to l2switch node */ 579 fdt_setprop(blob, node, "local-mac-address", l2swaddr, 580 sizeof(l2swaddr)); 581 } 582 #else 583 #define fdt_fixup_l2_switch(x) 584 #endif 585 586 void ft_cpu_setup(void *blob, bd_t *bd) 587 { 588 int off; 589 int val; 590 int len; 591 sys_info_t sysinfo; 592 593 /* delete crypto node if not on an E-processor */ 594 if (!IS_E_PROCESSOR(get_svr())) 595 fdt_fixup_crypto_node(blob, 0); 596 #if CONFIG_SYS_FSL_SEC_COMPAT >= 4 597 else { 598 ccsr_sec_t __iomem *sec; 599 600 sec = (void __iomem *)CONFIG_SYS_FSL_SEC_ADDR; 601 fdt_fixup_crypto_node(blob, sec_in32(&sec->secvid_ms)); 602 } 603 #endif 604 605 fdt_fixup_ethernet(blob); 606 607 fdt_add_enet_stashing(blob); 608 609 #ifndef CONFIG_FSL_TBCLK_EXTRA_DIV 610 #define CONFIG_FSL_TBCLK_EXTRA_DIV 1 611 #endif 612 do_fixup_by_prop_u32(blob, "device_type", "cpu", 4, 613 "timebase-frequency", get_tbclk() / CONFIG_FSL_TBCLK_EXTRA_DIV, 614 1); 615 do_fixup_by_prop_u32(blob, "device_type", "cpu", 4, 616 "bus-frequency", bd->bi_busfreq, 1); 617 get_sys_info(&sysinfo); 618 off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4); 619 while (off != -FDT_ERR_NOTFOUND) { 620 u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", &len); 621 val = cpu_to_fdt32(sysinfo.freq_processor[(*reg) / (len / 4)]); 622 fdt_setprop(blob, off, "clock-frequency", &val, 4); 623 off = fdt_node_offset_by_prop_value(blob, off, "device_type", 624 "cpu", 4); 625 } 626 do_fixup_by_prop_u32(blob, "device_type", "soc", 4, 627 "bus-frequency", bd->bi_busfreq, 1); 628 629 do_fixup_by_compat_u32(blob, "fsl,pq3-localbus", 630 "bus-frequency", gd->arch.lbc_clk, 1); 631 do_fixup_by_compat_u32(blob, "fsl,elbc", 632 "bus-frequency", gd->arch.lbc_clk, 1); 633 #ifdef CONFIG_QE 634 ft_qe_setup(blob); 635 ft_fixup_qe_snum(blob); 636 #endif 637 638 #ifdef CONFIG_SYS_DPAA_FMAN 639 fdt_fixup_fman_firmware(blob); 640 #endif 641 642 #ifdef CONFIG_SYS_NS16550 643 do_fixup_by_compat_u32(blob, "ns16550", 644 "clock-frequency", CONFIG_SYS_NS16550_CLK, 1); 645 #endif 646 647 #ifdef CONFIG_CPM2 648 do_fixup_by_compat_u32(blob, "fsl,cpm2-scc-uart", 649 "current-speed", gd->baudrate, 1); 650 651 do_fixup_by_compat_u32(blob, "fsl,cpm2-brg", 652 "clock-frequency", bd->bi_brgfreq, 1); 653 #endif 654 655 #ifdef CONFIG_FSL_CORENET 656 do_fixup_by_compat_u32(blob, "fsl,qoriq-clockgen-1.0", 657 "clock-frequency", CONFIG_SYS_CLK_FREQ, 1); 658 do_fixup_by_compat_u32(blob, "fsl,qoriq-clockgen-2.0", 659 "clock-frequency", CONFIG_SYS_CLK_FREQ, 1); 660 do_fixup_by_compat_u32(blob, "fsl,mpic", 661 "clock-frequency", get_bus_freq(0)/2, 1); 662 #else 663 do_fixup_by_compat_u32(blob, "fsl,mpic", 664 "clock-frequency", get_bus_freq(0), 1); 665 #endif 666 667 fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize); 668 669 #ifdef CONFIG_MP 670 ft_fixup_cpu(blob, (u64)bd->bi_memstart + (u64)bd->bi_memsize); 671 ft_fixup_num_cores(blob); 672 #endif 673 674 ft_fixup_cache(blob); 675 676 #if defined(CONFIG_FSL_ESDHC) 677 fdt_fixup_esdhc(blob, bd); 678 #endif 679 680 ft_fixup_dpaa_clks(blob); 681 682 #if defined(CONFIG_SYS_BMAN_MEM_PHYS) 683 fdt_portal(blob, "fsl,bman-portal", "bman-portals", 684 (u64)CONFIG_SYS_BMAN_MEM_PHYS, 685 CONFIG_SYS_BMAN_MEM_SIZE); 686 fdt_fixup_bportals(blob); 687 #endif 688 689 #if defined(CONFIG_SYS_QMAN_MEM_PHYS) 690 fdt_portal(blob, "fsl,qman-portal", "qman-portals", 691 (u64)CONFIG_SYS_QMAN_MEM_PHYS, 692 CONFIG_SYS_QMAN_MEM_SIZE); 693 694 fdt_fixup_qportals(blob); 695 #endif 696 697 #ifdef CONFIG_SYS_SRIO 698 ft_srio_setup(blob); 699 #endif 700 701 /* 702 * system-clock = CCB clock/2 703 * Here gd->bus_clk = CCB clock 704 * We are using the system clock as 1588 Timer reference 705 * clock source select 706 */ 707 do_fixup_by_compat_u32(blob, "fsl,gianfar-ptp-timer", 708 "timer-frequency", gd->bus_clk/2, 1); 709 710 /* 711 * clock-freq should change to clock-frequency and 712 * flexcan-v1.0 should change to p1010-flexcan respectively 713 * in the future. 714 */ 715 do_fixup_by_compat_u32(blob, "fsl,flexcan-v1.0", 716 "clock_freq", gd->bus_clk/2, 1); 717 718 do_fixup_by_compat_u32(blob, "fsl,flexcan-v1.0", 719 "clock-frequency", gd->bus_clk/2, 1); 720 721 do_fixup_by_compat_u32(blob, "fsl,p1010-flexcan", 722 "clock-frequency", gd->bus_clk/2, 1); 723 724 fdt_fixup_usb(blob); 725 726 fdt_fixup_l2_switch(blob); 727 728 fdt_fixup_dma3(blob); 729 } 730 731 /* 732 * For some CCSR devices, we only have the virtual address, not the physical 733 * address. This is because we map CCSR as a whole, so we typically don't need 734 * a macro for the physical address of any device within CCSR. In this case, 735 * we calculate the physical address of that device using it's the difference 736 * between the virtual address of the device and the virtual address of the 737 * beginning of CCSR. 738 */ 739 #define CCSR_VIRT_TO_PHYS(x) \ 740 (CONFIG_SYS_CCSRBAR_PHYS + ((x) - CONFIG_SYS_CCSRBAR)) 741 742 static void msg(const char *name, uint64_t uaddr, uint64_t daddr) 743 { 744 printf("Warning: U-Boot configured %s at address %llx,\n" 745 "but the device tree has it at %llx\n", name, uaddr, daddr); 746 } 747 748 /* 749 * Verify the device tree 750 * 751 * This function compares several CONFIG_xxx macros that contain physical 752 * addresses with the corresponding nodes in the device tree, to see if 753 * the physical addresses are all correct. For example, if 754 * CONFIG_SYS_NS16550_COM1 is defined, then it contains the virtual address 755 * of the first UART. We convert this to a physical address and compare 756 * that with the physical address of the first ns16550-compatible node 757 * in the device tree. If they don't match, then we display a warning. 758 * 759 * Returns 1 on success, 0 on failure 760 */ 761 int ft_verify_fdt(void *fdt) 762 { 763 uint64_t addr = 0; 764 int aliases; 765 int off; 766 767 /* First check the CCSR base address */ 768 off = fdt_node_offset_by_prop_value(fdt, -1, "device_type", "soc", 4); 769 if (off > 0) 770 addr = fdt_get_base_address(fdt, off); 771 772 if (!addr) { 773 printf("Warning: could not determine base CCSR address in " 774 "device tree\n"); 775 /* No point in checking anything else */ 776 return 0; 777 } 778 779 if (addr != CONFIG_SYS_CCSRBAR_PHYS) { 780 msg("CCSR", CONFIG_SYS_CCSRBAR_PHYS, addr); 781 /* No point in checking anything else */ 782 return 0; 783 } 784 785 /* 786 * Check some nodes via aliases. We assume that U-Boot and the device 787 * tree enumerate the devices equally. E.g. the first serial port in 788 * U-Boot is the same as "serial0" in the device tree. 789 */ 790 aliases = fdt_path_offset(fdt, "/aliases"); 791 if (aliases > 0) { 792 #ifdef CONFIG_SYS_NS16550_COM1 793 if (!fdt_verify_alias_address(fdt, aliases, "serial0", 794 CCSR_VIRT_TO_PHYS(CONFIG_SYS_NS16550_COM1))) 795 return 0; 796 #endif 797 798 #ifdef CONFIG_SYS_NS16550_COM2 799 if (!fdt_verify_alias_address(fdt, aliases, "serial1", 800 CCSR_VIRT_TO_PHYS(CONFIG_SYS_NS16550_COM2))) 801 return 0; 802 #endif 803 } 804 805 /* 806 * The localbus node is typically a root node, even though the lbc 807 * controller is part of CCSR. If we were to put the lbc node under 808 * the SOC node, then the 'ranges' property in the lbc node would 809 * translate through the 'ranges' property of the parent SOC node, and 810 * we don't want that. Since it's a separate node, it's possible for 811 * the 'reg' property to be wrong, so check it here. For now, we 812 * only check for "fsl,elbc" nodes. 813 */ 814 #ifdef CONFIG_SYS_LBC_ADDR 815 off = fdt_node_offset_by_compatible(fdt, -1, "fsl,elbc"); 816 if (off > 0) { 817 const fdt32_t *reg = fdt_getprop(fdt, off, "reg", NULL); 818 if (reg) { 819 uint64_t uaddr = CCSR_VIRT_TO_PHYS(CONFIG_SYS_LBC_ADDR); 820 821 addr = fdt_translate_address(fdt, off, reg); 822 if (uaddr != addr) { 823 msg("the localbus", uaddr, addr); 824 return 0; 825 } 826 } 827 } 828 #endif 829 830 return 1; 831 } 832 833 void fdt_del_diu(void *blob) 834 { 835 int nodeoff = 0; 836 837 while ((nodeoff = fdt_node_offset_by_compatible(blob, 0, 838 "fsl,diu")) >= 0) { 839 fdt_del_node(blob, nodeoff); 840 } 841 } 842