1 /* 2 * Copyright 2007-2011 Freescale Semiconductor, Inc. 3 * 4 * (C) Copyright 2003 Motorola Inc. 5 * Modified by Xianghua Xiao, X.Xiao@motorola.com 6 * 7 * (C) Copyright 2000 8 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. 9 * 10 * SPDX-License-Identifier: GPL-2.0+ 11 */ 12 13 #include <common.h> 14 #include <watchdog.h> 15 #include <asm/processor.h> 16 #include <ioports.h> 17 #include <sata.h> 18 #include <fm_eth.h> 19 #include <asm/io.h> 20 #include <asm/cache.h> 21 #include <asm/mmu.h> 22 #include <asm/fsl_law.h> 23 #include <asm/fsl_serdes.h> 24 #include <asm/fsl_srio.h> 25 #include <hwconfig.h> 26 #include <linux/compiler.h> 27 #include "mp.h" 28 #ifdef CONFIG_SYS_QE_FMAN_FW_IN_NAND 29 #include <nand.h> 30 #include <errno.h> 31 #endif 32 33 #include "../../../../drivers/block/fsl_sata.h" 34 35 DECLARE_GLOBAL_DATA_PTR; 36 37 #ifdef CONFIG_QE 38 extern qe_iop_conf_t qe_iop_conf_tab[]; 39 extern void qe_config_iopin(u8 port, u8 pin, int dir, 40 int open_drain, int assign); 41 extern void qe_init(uint qe_base); 42 extern void qe_reset(void); 43 44 static void config_qe_ioports(void) 45 { 46 u8 port, pin; 47 int dir, open_drain, assign; 48 int i; 49 50 for (i = 0; qe_iop_conf_tab[i].assign != QE_IOP_TAB_END; i++) { 51 port = qe_iop_conf_tab[i].port; 52 pin = qe_iop_conf_tab[i].pin; 53 dir = qe_iop_conf_tab[i].dir; 54 open_drain = qe_iop_conf_tab[i].open_drain; 55 assign = qe_iop_conf_tab[i].assign; 56 qe_config_iopin(port, pin, dir, open_drain, assign); 57 } 58 } 59 #endif 60 61 #ifdef CONFIG_CPM2 62 void config_8560_ioports (volatile ccsr_cpm_t * cpm) 63 { 64 int portnum; 65 66 for (portnum = 0; portnum < 4; portnum++) { 67 uint pmsk = 0, 68 ppar = 0, 69 psor = 0, 70 pdir = 0, 71 podr = 0, 72 pdat = 0; 73 iop_conf_t *iopc = (iop_conf_t *) & iop_conf_tab[portnum][0]; 74 iop_conf_t *eiopc = iopc + 32; 75 uint msk = 1; 76 77 /* 78 * NOTE: 79 * index 0 refers to pin 31, 80 * index 31 refers to pin 0 81 */ 82 while (iopc < eiopc) { 83 if (iopc->conf) { 84 pmsk |= msk; 85 if (iopc->ppar) 86 ppar |= msk; 87 if (iopc->psor) 88 psor |= msk; 89 if (iopc->pdir) 90 pdir |= msk; 91 if (iopc->podr) 92 podr |= msk; 93 if (iopc->pdat) 94 pdat |= msk; 95 } 96 97 msk <<= 1; 98 iopc++; 99 } 100 101 if (pmsk != 0) { 102 volatile ioport_t *iop = ioport_addr (cpm, portnum); 103 uint tpmsk = ~pmsk; 104 105 /* 106 * the (somewhat confused) paragraph at the 107 * bottom of page 35-5 warns that there might 108 * be "unknown behaviour" when programming 109 * PSORx and PDIRx, if PPARx = 1, so I 110 * decided this meant I had to disable the 111 * dedicated function first, and enable it 112 * last. 113 */ 114 iop->ppar &= tpmsk; 115 iop->psor = (iop->psor & tpmsk) | psor; 116 iop->podr = (iop->podr & tpmsk) | podr; 117 iop->pdat = (iop->pdat & tpmsk) | pdat; 118 iop->pdir = (iop->pdir & tpmsk) | pdir; 119 iop->ppar |= ppar; 120 } 121 } 122 } 123 #endif 124 125 #ifdef CONFIG_SYS_FSL_CPC 126 static void enable_cpc(void) 127 { 128 int i; 129 u32 size = 0; 130 131 cpc_corenet_t *cpc = (cpc_corenet_t *)CONFIG_SYS_FSL_CPC_ADDR; 132 133 for (i = 0; i < CONFIG_SYS_NUM_CPC; i++, cpc++) { 134 u32 cpccfg0 = in_be32(&cpc->cpccfg0); 135 size += CPC_CFG0_SZ_K(cpccfg0); 136 #ifdef CONFIG_RAMBOOT_PBL 137 if (in_be32(&cpc->cpcsrcr0) & CPC_SRCR0_SRAMEN) { 138 /* find and disable LAW of SRAM */ 139 struct law_entry law = find_law(CONFIG_SYS_INIT_L3_ADDR); 140 141 if (law.index == -1) { 142 printf("\nFatal error happened\n"); 143 return; 144 } 145 disable_law(law.index); 146 147 clrbits_be32(&cpc->cpchdbcr0, CPC_HDBCR0_CDQ_SPEC_DIS); 148 out_be32(&cpc->cpccsr0, 0); 149 out_be32(&cpc->cpcsrcr0, 0); 150 } 151 #endif 152 153 #ifdef CONFIG_SYS_FSL_ERRATUM_CPC_A002 154 setbits_be32(&cpc->cpchdbcr0, CPC_HDBCR0_TAG_ECC_SCRUB_DIS); 155 #endif 156 #ifdef CONFIG_SYS_FSL_ERRATUM_CPC_A003 157 setbits_be32(&cpc->cpchdbcr0, CPC_HDBCR0_DATA_ECC_SCRUB_DIS); 158 #endif 159 #ifdef CONFIG_SYS_FSL_ERRATUM_A006593 160 setbits_be32(&cpc->cpchdbcr0, 1 << (31 - 21)); 161 #endif 162 163 out_be32(&cpc->cpccsr0, CPC_CSR0_CE | CPC_CSR0_PE); 164 /* Read back to sync write */ 165 in_be32(&cpc->cpccsr0); 166 167 } 168 169 printf("Corenet Platform Cache: %d KB enabled\n", size); 170 } 171 172 static void invalidate_cpc(void) 173 { 174 int i; 175 cpc_corenet_t *cpc = (cpc_corenet_t *)CONFIG_SYS_FSL_CPC_ADDR; 176 177 for (i = 0; i < CONFIG_SYS_NUM_CPC; i++, cpc++) { 178 /* skip CPC when it used as all SRAM */ 179 if (in_be32(&cpc->cpcsrcr0) & CPC_SRCR0_SRAMEN) 180 continue; 181 /* Flash invalidate the CPC and clear all the locks */ 182 out_be32(&cpc->cpccsr0, CPC_CSR0_FI | CPC_CSR0_LFC); 183 while (in_be32(&cpc->cpccsr0) & (CPC_CSR0_FI | CPC_CSR0_LFC)) 184 ; 185 } 186 } 187 #else 188 #define enable_cpc() 189 #define invalidate_cpc() 190 #endif /* CONFIG_SYS_FSL_CPC */ 191 192 /* 193 * Breathe some life into the CPU... 194 * 195 * Set up the memory map 196 * initialize a bunch of registers 197 */ 198 199 #ifdef CONFIG_FSL_CORENET 200 static void corenet_tb_init(void) 201 { 202 volatile ccsr_rcpm_t *rcpm = 203 (void *)(CONFIG_SYS_FSL_CORENET_RCPM_ADDR); 204 volatile ccsr_pic_t *pic = 205 (void *)(CONFIG_SYS_MPC8xxx_PIC_ADDR); 206 u32 whoami = in_be32(&pic->whoami); 207 208 /* Enable the timebase register for this core */ 209 out_be32(&rcpm->ctbenrl, (1 << whoami)); 210 } 211 #endif 212 213 void cpu_init_f (void) 214 { 215 extern void m8560_cpm_reset (void); 216 #ifdef CONFIG_SYS_DCSRBAR_PHYS 217 ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); 218 #endif 219 #if defined(CONFIG_SECURE_BOOT) 220 struct law_entry law; 221 #endif 222 #ifdef CONFIG_MPC8548 223 ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR); 224 uint svr = get_svr(); 225 226 /* 227 * CPU2 errata workaround: A core hang possible while executing 228 * a msync instruction and a snoopable transaction from an I/O 229 * master tagged to make quick forward progress is present. 230 * Fixed in silicon rev 2.1. 231 */ 232 if ((SVR_MAJ(svr) == 1) || ((SVR_MAJ(svr) == 2 && SVR_MIN(svr) == 0x0))) 233 out_be32(&ecm->eebpcr, in_be32(&ecm->eebpcr) | (1 << 16)); 234 #endif 235 236 disable_tlb(14); 237 disable_tlb(15); 238 239 #if defined(CONFIG_SECURE_BOOT) 240 /* Disable the LAW created for NOR flash by the PBI commands */ 241 law = find_law(CONFIG_SYS_PBI_FLASH_BASE); 242 if (law.index != -1) 243 disable_law(law.index); 244 #endif 245 246 #ifdef CONFIG_CPM2 247 config_8560_ioports((ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR); 248 #endif 249 250 init_early_memctl_regs(); 251 252 #if defined(CONFIG_CPM2) 253 m8560_cpm_reset(); 254 #endif 255 #ifdef CONFIG_QE 256 /* Config QE ioports */ 257 config_qe_ioports(); 258 #endif 259 #if defined(CONFIG_FSL_DMA) 260 dma_init(); 261 #endif 262 #ifdef CONFIG_FSL_CORENET 263 corenet_tb_init(); 264 #endif 265 init_used_tlb_cams(); 266 267 /* Invalidate the CPC before DDR gets enabled */ 268 invalidate_cpc(); 269 270 #ifdef CONFIG_SYS_DCSRBAR_PHYS 271 /* set DCSRCR so that DCSR space is 1G */ 272 setbits_be32(&gur->dcsrcr, FSL_CORENET_DCSR_SZ_1G); 273 in_be32(&gur->dcsrcr); 274 #endif 275 276 } 277 278 /* Implement a dummy function for those platforms w/o SERDES */ 279 static void __fsl_serdes__init(void) 280 { 281 return ; 282 } 283 __attribute__((weak, alias("__fsl_serdes__init"))) void fsl_serdes_init(void); 284 285 #ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2 286 int enable_cluster_l2(void) 287 { 288 int i = 0; 289 u32 cluster; 290 ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); 291 struct ccsr_cluster_l2 __iomem *l2cache; 292 293 cluster = in_be32(&gur->tp_cluster[i].lower); 294 if (cluster & TP_CLUSTER_EOC) 295 return 0; 296 297 /* The first cache has already been set up, so skip it */ 298 i++; 299 300 /* Look through the remaining clusters, and set up their caches */ 301 do { 302 int j, cluster_valid = 0; 303 304 l2cache = (void __iomem *)(CONFIG_SYS_FSL_CLUSTER_1_L2 + i * 0x40000); 305 306 cluster = in_be32(&gur->tp_cluster[i].lower); 307 308 /* check that at least one core/accel is enabled in cluster */ 309 for (j = 0; j < 4; j++) { 310 u32 idx = (cluster >> (j*8)) & TP_CLUSTER_INIT_MASK; 311 u32 type = in_be32(&gur->tp_ityp[idx]); 312 313 if (type & TP_ITYP_AV) 314 cluster_valid = 1; 315 } 316 317 if (cluster_valid) { 318 /* set stash ID to (cluster) * 2 + 32 + 1 */ 319 clrsetbits_be32(&l2cache->l2csr1, 0xff, 32 + i * 2 + 1); 320 321 printf("enable l2 for cluster %d %p\n", i, l2cache); 322 323 out_be32(&l2cache->l2csr0, L2CSR0_L2FI|L2CSR0_L2LFC); 324 while ((in_be32(&l2cache->l2csr0) 325 & (L2CSR0_L2FI|L2CSR0_L2LFC)) != 0) 326 ; 327 out_be32(&l2cache->l2csr0, L2CSR0_L2E|L2CSR0_L2PE|L2CSR0_L2REP_MODE); 328 } 329 i++; 330 } while (!(cluster & TP_CLUSTER_EOC)); 331 332 return 0; 333 } 334 #endif 335 336 /* 337 * Initialize L2 as cache. 338 * 339 * The newer 8548, etc, parts have twice as much cache, but 340 * use the same bit-encoding as the older 8555, etc, parts. 341 * 342 */ 343 int cpu_init_r(void) 344 { 345 __maybe_unused u32 svr = get_svr(); 346 #ifdef CONFIG_SYS_LBC_LCRR 347 fsl_lbc_t *lbc = (void __iomem *)LBC_BASE_ADDR; 348 #endif 349 #ifdef CONFIG_L2_CACHE 350 ccsr_l2cache_t *l2cache = (void __iomem *)CONFIG_SYS_MPC85xx_L2_ADDR; 351 #elif defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2) 352 struct ccsr_cluster_l2 * l2cache = (void __iomem *)CONFIG_SYS_FSL_CLUSTER_1_L2; 353 #endif 354 #if defined(CONFIG_PPC_SPINTABLE_COMPATIBLE) && defined(CONFIG_MP) 355 extern int spin_table_compat; 356 const char *spin; 357 #endif 358 359 #if defined(CONFIG_SYS_P4080_ERRATUM_CPU22) || \ 360 defined(CONFIG_SYS_FSL_ERRATUM_NMG_CPU_A011) 361 /* 362 * CPU22 and NMG_CPU_A011 share the same workaround. 363 * CPU22 applies to P4080 rev 1.0, 2.0, fixed in 3.0 364 * NMG_CPU_A011 applies to P4080 rev 1.0, 2.0, fixed in 3.0 365 * also applies to P3041 rev 1.0, 1.1, P2041 rev 1.0, 1.1, both 366 * fixed in 2.0. NMG_CPU_A011 is activated by default and can 367 * be disabled by hwconfig with syntax: 368 * 369 * fsl_cpu_a011:disable 370 */ 371 extern int enable_cpu_a011_workaround; 372 #ifdef CONFIG_SYS_P4080_ERRATUM_CPU22 373 enable_cpu_a011_workaround = (SVR_MAJ(svr) < 3); 374 #else 375 char buffer[HWCONFIG_BUFFER_SIZE]; 376 char *buf = NULL; 377 int n, res; 378 379 n = getenv_f("hwconfig", buffer, sizeof(buffer)); 380 if (n > 0) 381 buf = buffer; 382 383 res = hwconfig_arg_cmp_f("fsl_cpu_a011", "disable", buf); 384 if (res > 0) 385 enable_cpu_a011_workaround = 0; 386 else { 387 if (n >= HWCONFIG_BUFFER_SIZE) { 388 printf("fsl_cpu_a011 was not found. hwconfig variable " 389 "may be too long\n"); 390 } 391 enable_cpu_a011_workaround = 392 (SVR_SOC_VER(svr) == SVR_P4080 && SVR_MAJ(svr) < 3) || 393 (SVR_SOC_VER(svr) != SVR_P4080 && SVR_MAJ(svr) < 2); 394 } 395 #endif 396 if (enable_cpu_a011_workaround) { 397 flush_dcache(); 398 mtspr(L1CSR2, (mfspr(L1CSR2) | L1CSR2_DCWS)); 399 sync(); 400 } 401 #endif 402 403 #if defined(CONFIG_PPC_SPINTABLE_COMPATIBLE) && defined(CONFIG_MP) 404 spin = getenv("spin_table_compat"); 405 if (spin && (*spin == 'n')) 406 spin_table_compat = 0; 407 else 408 spin_table_compat = 1; 409 #endif 410 411 puts ("L2: "); 412 413 #if defined(CONFIG_L2_CACHE) 414 volatile uint cache_ctl; 415 uint ver; 416 u32 l2siz_field; 417 418 ver = SVR_SOC_VER(svr); 419 420 asm("msync;isync"); 421 cache_ctl = l2cache->l2ctl; 422 423 #if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L2_ADDR) 424 if (cache_ctl & MPC85xx_L2CTL_L2E) { 425 /* Clear L2 SRAM memory-mapped base address */ 426 out_be32(&l2cache->l2srbar0, 0x0); 427 out_be32(&l2cache->l2srbar1, 0x0); 428 429 /* set MBECCDIS=0, SBECCDIS=0 */ 430 clrbits_be32(&l2cache->l2errdis, 431 (MPC85xx_L2ERRDIS_MBECC | 432 MPC85xx_L2ERRDIS_SBECC)); 433 434 /* set L2E=0, L2SRAM=0 */ 435 clrbits_be32(&l2cache->l2ctl, 436 (MPC85xx_L2CTL_L2E | 437 MPC85xx_L2CTL_L2SRAM_ENTIRE)); 438 } 439 #endif 440 441 l2siz_field = (cache_ctl >> 28) & 0x3; 442 443 switch (l2siz_field) { 444 case 0x0: 445 printf(" unknown size (0x%08x)\n", cache_ctl); 446 return -1; 447 break; 448 case 0x1: 449 if (ver == SVR_8540 || ver == SVR_8560 || 450 ver == SVR_8541 || ver == SVR_8555) { 451 puts("128 KB "); 452 /* set L2E=1, L2I=1, & L2BLKSZ=1 (128 Kbyte) */ 453 cache_ctl = 0xc4000000; 454 } else { 455 puts("256 KB "); 456 cache_ctl = 0xc0000000; /* set L2E=1, L2I=1, & L2SRAM=0 */ 457 } 458 break; 459 case 0x2: 460 if (ver == SVR_8540 || ver == SVR_8560 || 461 ver == SVR_8541 || ver == SVR_8555) { 462 puts("256 KB "); 463 /* set L2E=1, L2I=1, & L2BLKSZ=2 (256 Kbyte) */ 464 cache_ctl = 0xc8000000; 465 } else { 466 puts ("512 KB "); 467 /* set L2E=1, L2I=1, & L2SRAM=0 */ 468 cache_ctl = 0xc0000000; 469 } 470 break; 471 case 0x3: 472 puts("1024 KB "); 473 /* set L2E=1, L2I=1, & L2SRAM=0 */ 474 cache_ctl = 0xc0000000; 475 break; 476 } 477 478 if (l2cache->l2ctl & MPC85xx_L2CTL_L2E) { 479 puts("already enabled"); 480 #if defined(CONFIG_SYS_INIT_L2_ADDR) && defined(CONFIG_SYS_FLASH_BASE) 481 u32 l2srbar = l2cache->l2srbar0; 482 if (l2cache->l2ctl & MPC85xx_L2CTL_L2SRAM_ENTIRE 483 && l2srbar >= CONFIG_SYS_FLASH_BASE) { 484 l2srbar = CONFIG_SYS_INIT_L2_ADDR; 485 l2cache->l2srbar0 = l2srbar; 486 printf(", moving to 0x%08x", CONFIG_SYS_INIT_L2_ADDR); 487 } 488 #endif /* CONFIG_SYS_INIT_L2_ADDR */ 489 puts("\n"); 490 } else { 491 asm("msync;isync"); 492 l2cache->l2ctl = cache_ctl; /* invalidate & enable */ 493 asm("msync;isync"); 494 puts("enabled\n"); 495 } 496 #elif defined(CONFIG_BACKSIDE_L2_CACHE) 497 if (SVR_SOC_VER(svr) == SVR_P2040) { 498 puts("N/A\n"); 499 goto skip_l2; 500 } 501 502 u32 l2cfg0 = mfspr(SPRN_L2CFG0); 503 504 /* invalidate the L2 cache */ 505 mtspr(SPRN_L2CSR0, (L2CSR0_L2FI|L2CSR0_L2LFC)); 506 while (mfspr(SPRN_L2CSR0) & (L2CSR0_L2FI|L2CSR0_L2LFC)) 507 ; 508 509 #ifdef CONFIG_SYS_CACHE_STASHING 510 /* set stash id to (coreID) * 2 + 32 + L2 (1) */ 511 mtspr(SPRN_L2CSR1, (32 + 1)); 512 #endif 513 514 /* enable the cache */ 515 mtspr(SPRN_L2CSR0, CONFIG_SYS_INIT_L2CSR0); 516 517 if (CONFIG_SYS_INIT_L2CSR0 & L2CSR0_L2E) { 518 while (!(mfspr(SPRN_L2CSR0) & L2CSR0_L2E)) 519 ; 520 printf("%d KB enabled\n", (l2cfg0 & 0x3fff) * 64); 521 } 522 523 skip_l2: 524 #elif defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2) 525 if (l2cache->l2csr0 & L2CSR0_L2E) 526 printf("%d KB enabled\n", (l2cache->l2cfg0 & 0x3fff) * 64); 527 528 enable_cluster_l2(); 529 #else 530 puts("disabled\n"); 531 #endif 532 533 enable_cpc(); 534 535 #ifndef CONFIG_SYS_FSL_NO_SERDES 536 /* needs to be in ram since code uses global static vars */ 537 fsl_serdes_init(); 538 #endif 539 540 #ifdef CONFIG_SYS_FSL_ERRATUM_A005871 541 if (IS_SVR_REV(svr, 1, 0)) { 542 int i; 543 __be32 *p = (void __iomem *)CONFIG_SYS_DCSRBAR + 0xb004c; 544 545 for (i = 0; i < 12; i++) { 546 p += i + (i > 5 ? 11 : 0); 547 out_be32(p, 0x2); 548 } 549 p = (void __iomem *)CONFIG_SYS_DCSRBAR + 0xb0108; 550 out_be32(p, 0x34); 551 } 552 #endif 553 554 #ifdef CONFIG_SYS_SRIO 555 srio_init(); 556 #ifdef CONFIG_SRIO_PCIE_BOOT_MASTER 557 char *s = getenv("bootmaster"); 558 if (s) { 559 if (!strcmp(s, "SRIO1")) { 560 srio_boot_master(1); 561 srio_boot_master_release_slave(1); 562 } 563 if (!strcmp(s, "SRIO2")) { 564 srio_boot_master(2); 565 srio_boot_master_release_slave(2); 566 } 567 } 568 #endif 569 #endif 570 571 #if defined(CONFIG_MP) 572 setup_mp(); 573 #endif 574 575 #ifdef CONFIG_SYS_FSL_ERRATUM_ESDHC13 576 { 577 if (SVR_MAJ(svr) < 3) { 578 void *p; 579 p = (void *)CONFIG_SYS_DCSRBAR + 0x20520; 580 setbits_be32(p, 1 << (31 - 14)); 581 } 582 } 583 #endif 584 585 #ifdef CONFIG_SYS_LBC_LCRR 586 /* 587 * Modify the CLKDIV field of LCRR register to improve the writing 588 * speed for NOR flash. 589 */ 590 clrsetbits_be32(&lbc->lcrr, LCRR_CLKDIV, CONFIG_SYS_LBC_LCRR); 591 __raw_readl(&lbc->lcrr); 592 isync(); 593 #ifdef CONFIG_SYS_FSL_ERRATUM_NMG_LBC103 594 udelay(100); 595 #endif 596 #endif 597 598 #ifdef CONFIG_SYS_FSL_USB1_PHY_ENABLE 599 { 600 ccsr_usb_phy_t *usb_phy1 = 601 (void *)CONFIG_SYS_MPC85xx_USB1_PHY_ADDR; 602 out_be32(&usb_phy1->usb_enable_override, 603 CONFIG_SYS_FSL_USB_ENABLE_OVERRIDE); 604 } 605 #endif 606 #ifdef CONFIG_SYS_FSL_USB2_PHY_ENABLE 607 { 608 ccsr_usb_phy_t *usb_phy2 = 609 (void *)CONFIG_SYS_MPC85xx_USB2_PHY_ADDR; 610 out_be32(&usb_phy2->usb_enable_override, 611 CONFIG_SYS_FSL_USB_ENABLE_OVERRIDE); 612 } 613 #endif 614 615 #ifdef CONFIG_SYS_FSL_ERRATUM_USB14 616 /* On P204x/P304x/P50x0 Rev1.0, USB transmit will result internal 617 * multi-bit ECC errors which has impact on performance, so software 618 * should disable all ECC reporting from USB1 and USB2. 619 */ 620 if (IS_SVR_REV(get_svr(), 1, 0)) { 621 struct dcsr_dcfg_regs *dcfg = (struct dcsr_dcfg_regs *) 622 (CONFIG_SYS_DCSRBAR + CONFIG_SYS_DCSR_DCFG_OFFSET); 623 setbits_be32(&dcfg->ecccr1, 624 (DCSR_DCFG_ECC_DISABLE_USB1 | 625 DCSR_DCFG_ECC_DISABLE_USB2)); 626 } 627 #endif 628 629 #if defined(CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE) 630 ccsr_usb_phy_t *usb_phy = 631 (void *)CONFIG_SYS_MPC85xx_USB1_PHY_ADDR; 632 setbits_be32(&usb_phy->pllprg[1], 633 CONFIG_SYS_FSL_USB_PLLPRG2_PHY2_CLK_EN | 634 CONFIG_SYS_FSL_USB_PLLPRG2_PHY1_CLK_EN | 635 CONFIG_SYS_FSL_USB_PLLPRG2_MFI | 636 CONFIG_SYS_FSL_USB_PLLPRG2_PLL_EN); 637 setbits_be32(&usb_phy->port1.ctrl, 638 CONFIG_SYS_FSL_USB_CTRL_PHY_EN); 639 setbits_be32(&usb_phy->port1.drvvbuscfg, 640 CONFIG_SYS_FSL_USB_DRVVBUS_CR_EN); 641 setbits_be32(&usb_phy->port1.pwrfltcfg, 642 CONFIG_SYS_FSL_USB_PWRFLT_CR_EN); 643 setbits_be32(&usb_phy->port2.ctrl, 644 CONFIG_SYS_FSL_USB_CTRL_PHY_EN); 645 setbits_be32(&usb_phy->port2.drvvbuscfg, 646 CONFIG_SYS_FSL_USB_DRVVBUS_CR_EN); 647 setbits_be32(&usb_phy->port2.pwrfltcfg, 648 CONFIG_SYS_FSL_USB_PWRFLT_CR_EN); 649 #endif 650 651 #ifdef CONFIG_FMAN_ENET 652 fman_enet_init(); 653 #endif 654 655 #if defined(CONFIG_FSL_SATA_V2) && defined(CONFIG_FSL_SATA_ERRATUM_A001) 656 /* 657 * For P1022/1013 Rev1.0 silicon, after power on SATA host 658 * controller is configured in legacy mode instead of the 659 * expected enterprise mode. Software needs to clear bit[28] 660 * of HControl register to change to enterprise mode from 661 * legacy mode. We assume that the controller is offline. 662 */ 663 if (IS_SVR_REV(svr, 1, 0) && 664 ((SVR_SOC_VER(svr) == SVR_P1022) || 665 (SVR_SOC_VER(svr) == SVR_P1013))) { 666 fsl_sata_reg_t *reg; 667 668 /* first SATA controller */ 669 reg = (void *)CONFIG_SYS_MPC85xx_SATA1_ADDR; 670 clrbits_le32(®->hcontrol, HCONTROL_ENTERPRISE_EN); 671 672 /* second SATA controller */ 673 reg = (void *)CONFIG_SYS_MPC85xx_SATA2_ADDR; 674 clrbits_le32(®->hcontrol, HCONTROL_ENTERPRISE_EN); 675 } 676 #endif 677 678 679 return 0; 680 } 681 682 extern void setup_ivors(void); 683 684 void arch_preboot_os(void) 685 { 686 u32 msr; 687 688 /* 689 * We are changing interrupt offsets and are about to boot the OS so 690 * we need to make sure we disable all async interrupts. EE is already 691 * disabled by the time we get called. 692 */ 693 msr = mfmsr(); 694 msr &= ~(MSR_ME|MSR_CE); 695 mtmsr(msr); 696 697 setup_ivors(); 698 } 699 700 #if defined(CONFIG_CMD_SATA) && defined(CONFIG_FSL_SATA) 701 int sata_initialize(void) 702 { 703 if (is_serdes_configured(SATA1) || is_serdes_configured(SATA2)) 704 return __sata_initialize(); 705 706 return 1; 707 } 708 #endif 709 710 void cpu_secondary_init_r(void) 711 { 712 #ifdef CONFIG_QE 713 uint qe_base = CONFIG_SYS_IMMR + 0x00080000; /* QE immr base */ 714 #ifdef CONFIG_SYS_QE_FMAN_FW_IN_NAND 715 int ret; 716 size_t fw_length = CONFIG_SYS_QE_FMAN_FW_LENGTH; 717 718 /* load QE firmware from NAND flash to DDR first */ 719 ret = nand_read(&nand_info[0], (loff_t)CONFIG_SYS_QE_FMAN_FW_IN_NAND, 720 &fw_length, (u_char *)CONFIG_SYS_QE_FMAN_FW_ADDR); 721 722 if (ret && ret == -EUCLEAN) { 723 printf ("NAND read for QE firmware at offset %x failed %d\n", 724 CONFIG_SYS_QE_FMAN_FW_IN_NAND, ret); 725 } 726 #endif 727 qe_init(qe_base); 728 qe_reset(); 729 #endif 730 } 731