1 /* 2 * Copyright 2004,2007-2011 Freescale Semiconductor, Inc. 3 * (C) Copyright 2002, 2003 Motorola Inc. 4 * Xianghua Xiao (X.Xiao@motorola.com) 5 * 6 * (C) Copyright 2000 7 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. 8 * 9 * SPDX-License-Identifier: GPL-2.0+ 10 */ 11 12 #include <config.h> 13 #include <common.h> 14 #include <watchdog.h> 15 #include <command.h> 16 #include <fsl_esdhc.h> 17 #include <asm/cache.h> 18 #include <asm/io.h> 19 #include <asm/mmu.h> 20 #include <asm/fsl_ifc.h> 21 #include <asm/fsl_law.h> 22 #include <asm/fsl_lbc.h> 23 #include <post.h> 24 #include <asm/processor.h> 25 #include <fsl_ddr_sdram.h> 26 27 DECLARE_GLOBAL_DATA_PTR; 28 29 /* 30 * Default board reset function 31 */ 32 static void 33 __board_reset(void) 34 { 35 /* Do nothing */ 36 } 37 void board_reset(void) __attribute__((weak, alias("__board_reset"))); 38 39 int checkcpu (void) 40 { 41 sys_info_t sysinfo; 42 uint pvr, svr; 43 uint ver; 44 uint major, minor; 45 struct cpu_type *cpu; 46 char buf1[32], buf2[32]; 47 #if defined(CONFIG_DDR_CLK_FREQ) || defined(CONFIG_FSL_CORENET) 48 ccsr_gur_t __iomem *gur = 49 (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); 50 #endif 51 52 /* 53 * Cornet platforms use ddr sync bit in RCW to indicate sync vs async 54 * mode. Previous platform use ddr ratio to do the same. This 55 * information is only for display here. 56 */ 57 #ifdef CONFIG_FSL_CORENET 58 #ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2 59 u32 ddr_sync = 0; /* only async mode is supported */ 60 #else 61 u32 ddr_sync = ((gur->rcwsr[5]) & FSL_CORENET_RCWSR5_DDR_SYNC) 62 >> FSL_CORENET_RCWSR5_DDR_SYNC_SHIFT; 63 #endif /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */ 64 #else /* CONFIG_FSL_CORENET */ 65 #ifdef CONFIG_DDR_CLK_FREQ 66 u32 ddr_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_DDR_RATIO) 67 >> MPC85xx_PORPLLSR_DDR_RATIO_SHIFT; 68 #else 69 u32 ddr_ratio = 0; 70 #endif /* CONFIG_DDR_CLK_FREQ */ 71 #endif /* CONFIG_FSL_CORENET */ 72 73 unsigned int i, core, nr_cores = cpu_numcores(); 74 u32 mask = cpu_mask(); 75 76 svr = get_svr(); 77 major = SVR_MAJ(svr); 78 minor = SVR_MIN(svr); 79 80 if (cpu_numcores() > 1) { 81 #ifndef CONFIG_MP 82 puts("Unicore software on multiprocessor system!!\n" 83 "To enable mutlticore build define CONFIG_MP\n"); 84 #endif 85 volatile ccsr_pic_t *pic = (void *)(CONFIG_SYS_MPC8xxx_PIC_ADDR); 86 printf("CPU%d: ", pic->whoami); 87 } else { 88 puts("CPU: "); 89 } 90 91 cpu = gd->arch.cpu; 92 93 puts(cpu->name); 94 if (IS_E_PROCESSOR(svr)) 95 puts("E"); 96 97 printf(", Version: %d.%d, (0x%08x)\n", major, minor, svr); 98 99 pvr = get_pvr(); 100 ver = PVR_VER(pvr); 101 major = PVR_MAJ(pvr); 102 minor = PVR_MIN(pvr); 103 104 printf("Core: "); 105 switch(ver) { 106 case PVR_VER_E500_V1: 107 case PVR_VER_E500_V2: 108 puts("e500"); 109 break; 110 case PVR_VER_E500MC: 111 puts("e500mc"); 112 break; 113 case PVR_VER_E5500: 114 puts("e5500"); 115 break; 116 case PVR_VER_E6500: 117 puts("e6500"); 118 break; 119 default: 120 puts("Unknown"); 121 break; 122 } 123 124 printf(", Version: %d.%d, (0x%08x)\n", major, minor, pvr); 125 126 if (nr_cores > CONFIG_MAX_CPUS) { 127 panic("\nUnexpected number of cores: %d, max is %d\n", 128 nr_cores, CONFIG_MAX_CPUS); 129 } 130 131 get_sys_info(&sysinfo); 132 133 puts("Clock Configuration:"); 134 for_each_cpu(i, core, nr_cores, mask) { 135 if (!(i & 3)) 136 printf ("\n "); 137 printf("CPU%d:%-4s MHz, ", core, 138 strmhz(buf1, sysinfo.freq_processor[core])); 139 } 140 printf("\n CCB:%-4s MHz,", strmhz(buf1, sysinfo.freq_systembus)); 141 printf("\n"); 142 143 #ifdef CONFIG_FSL_CORENET 144 if (ddr_sync == 1) { 145 printf(" DDR:%-4s MHz (%s MT/s data rate) " 146 "(Synchronous), ", 147 strmhz(buf1, sysinfo.freq_ddrbus/2), 148 strmhz(buf2, sysinfo.freq_ddrbus)); 149 } else { 150 printf(" DDR:%-4s MHz (%s MT/s data rate) " 151 "(Asynchronous), ", 152 strmhz(buf1, sysinfo.freq_ddrbus/2), 153 strmhz(buf2, sysinfo.freq_ddrbus)); 154 } 155 #else 156 switch (ddr_ratio) { 157 case 0x0: 158 printf(" DDR:%-4s MHz (%s MT/s data rate), ", 159 strmhz(buf1, sysinfo.freq_ddrbus/2), 160 strmhz(buf2, sysinfo.freq_ddrbus)); 161 break; 162 case 0x7: 163 printf(" DDR:%-4s MHz (%s MT/s data rate) " 164 "(Synchronous), ", 165 strmhz(buf1, sysinfo.freq_ddrbus/2), 166 strmhz(buf2, sysinfo.freq_ddrbus)); 167 break; 168 default: 169 printf(" DDR:%-4s MHz (%s MT/s data rate) " 170 "(Asynchronous), ", 171 strmhz(buf1, sysinfo.freq_ddrbus/2), 172 strmhz(buf2, sysinfo.freq_ddrbus)); 173 break; 174 } 175 #endif 176 177 #if defined(CONFIG_FSL_LBC) 178 if (sysinfo.freq_localbus > LCRR_CLKDIV) { 179 printf("LBC:%-4s MHz\n", strmhz(buf1, sysinfo.freq_localbus)); 180 } else { 181 printf("LBC: unknown (LCRR[CLKDIV] = 0x%02lx)\n", 182 sysinfo.freq_localbus); 183 } 184 #endif 185 186 #if defined(CONFIG_FSL_IFC) 187 printf("IFC:%-4s MHz\n", strmhz(buf1, sysinfo.freq_localbus)); 188 #endif 189 190 #ifdef CONFIG_CPM2 191 printf("CPM: %s MHz\n", strmhz(buf1, sysinfo.freq_systembus)); 192 #endif 193 194 #ifdef CONFIG_QE 195 printf(" QE:%-4s MHz\n", strmhz(buf1, sysinfo.freq_qe)); 196 #endif 197 198 #ifdef CONFIG_SYS_DPAA_FMAN 199 for (i = 0; i < CONFIG_SYS_NUM_FMAN; i++) { 200 printf(" FMAN%d: %s MHz\n", i + 1, 201 strmhz(buf1, sysinfo.freq_fman[i])); 202 } 203 #endif 204 205 #ifdef CONFIG_SYS_DPAA_QBMAN 206 printf(" QMAN: %s MHz\n", strmhz(buf1, sysinfo.freq_qman)); 207 #endif 208 209 #ifdef CONFIG_SYS_DPAA_PME 210 printf(" PME: %s MHz\n", strmhz(buf1, sysinfo.freq_pme)); 211 #endif 212 213 puts("L1: D-cache 32 KiB enabled\n I-cache 32 KiB enabled\n"); 214 215 #ifdef CONFIG_FSL_CORENET 216 /* Display the RCW, so that no one gets confused as to what RCW 217 * we're actually using for this boot. 218 */ 219 puts("Reset Configuration Word (RCW):"); 220 for (i = 0; i < ARRAY_SIZE(gur->rcwsr); i++) { 221 u32 rcw = in_be32(&gur->rcwsr[i]); 222 223 if ((i % 4) == 0) 224 printf("\n %08x:", i * 4); 225 printf(" %08x", rcw); 226 } 227 puts("\n"); 228 #endif 229 230 return 0; 231 } 232 233 234 /* ------------------------------------------------------------------------- */ 235 236 int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) 237 { 238 /* Everything after the first generation of PQ3 parts has RSTCR */ 239 #if defined(CONFIG_MPC8540) || defined(CONFIG_MPC8541) || \ 240 defined(CONFIG_MPC8555) || defined(CONFIG_MPC8560) 241 unsigned long val, msr; 242 243 /* 244 * Initiate hard reset in debug control register DBCR0 245 * Make sure MSR[DE] = 1. This only resets the core. 246 */ 247 msr = mfmsr (); 248 msr |= MSR_DE; 249 mtmsr (msr); 250 251 val = mfspr(DBCR0); 252 val |= 0x70000000; 253 mtspr(DBCR0,val); 254 #else 255 volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); 256 257 /* Attempt board-specific reset */ 258 board_reset(); 259 260 /* Next try asserting HRESET_REQ */ 261 out_be32(&gur->rstcr, 0x2); 262 udelay(100); 263 #endif 264 265 return 1; 266 } 267 268 269 /* 270 * Get timebase clock frequency 271 */ 272 #ifndef CONFIG_SYS_FSL_TBCLK_DIV 273 #define CONFIG_SYS_FSL_TBCLK_DIV 8 274 #endif 275 unsigned long get_tbclk (void) 276 { 277 unsigned long tbclk_div = CONFIG_SYS_FSL_TBCLK_DIV; 278 279 return (gd->bus_clk + (tbclk_div >> 1)) / tbclk_div; 280 } 281 282 283 #if defined(CONFIG_WATCHDOG) 284 void 285 reset_85xx_watchdog(void) 286 { 287 /* 288 * Clear TSR(WIS) bit by writing 1 289 */ 290 mtspr(SPRN_TSR, TSR_WIS); 291 } 292 293 void 294 watchdog_reset(void) 295 { 296 int re_enable = disable_interrupts(); 297 298 reset_85xx_watchdog(); 299 if (re_enable) 300 enable_interrupts(); 301 } 302 #endif /* CONFIG_WATCHDOG */ 303 304 /* 305 * Initializes on-chip MMC controllers. 306 * to override, implement board_mmc_init() 307 */ 308 int cpu_mmc_init(bd_t *bis) 309 { 310 #ifdef CONFIG_FSL_ESDHC 311 return fsl_esdhc_mmc_init(bis); 312 #else 313 return 0; 314 #endif 315 } 316 317 /* 318 * Print out the state of various machine registers. 319 * Currently prints out LAWs, BR0/OR0 for LBC, CSPR/CSOR/Timing 320 * parameters for IFC and TLBs 321 */ 322 void mpc85xx_reginfo(void) 323 { 324 print_tlbcam(); 325 print_laws(); 326 #if defined(CONFIG_FSL_LBC) 327 print_lbc_regs(); 328 #endif 329 #ifdef CONFIG_FSL_IFC 330 print_ifc_regs(); 331 #endif 332 333 } 334 335 /* Common ddr init for non-corenet fsl 85xx platforms */ 336 #ifndef CONFIG_FSL_CORENET 337 #if (defined(CONFIG_SYS_RAMBOOT) || defined(CONFIG_SPL)) && \ 338 !defined(CONFIG_SYS_INIT_L2_ADDR) 339 phys_size_t initdram(int board_type) 340 { 341 #if defined(CONFIG_SPD_EEPROM) || defined(CONFIG_DDR_SPD) 342 return fsl_ddr_sdram_size(); 343 #else 344 return (phys_size_t)CONFIG_SYS_SDRAM_SIZE * 1024 * 1024; 345 #endif 346 } 347 #else /* CONFIG_SYS_RAMBOOT */ 348 phys_size_t initdram(int board_type) 349 { 350 phys_size_t dram_size = 0; 351 352 #if defined(CONFIG_SYS_FSL_ERRATUM_DDR_MSYNC_IN) 353 { 354 ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); 355 unsigned int x = 10; 356 unsigned int i; 357 358 /* 359 * Work around to stabilize DDR DLL 360 */ 361 out_be32(&gur->ddrdllcr, 0x81000000); 362 asm("sync;isync;msync"); 363 udelay(200); 364 while (in_be32(&gur->ddrdllcr) != 0x81000100) { 365 setbits_be32(&gur->devdisr, 0x00010000); 366 for (i = 0; i < x; i++) 367 ; 368 clrbits_be32(&gur->devdisr, 0x00010000); 369 x++; 370 } 371 } 372 #endif 373 374 #if defined(CONFIG_SPD_EEPROM) || \ 375 defined(CONFIG_DDR_SPD) || \ 376 defined(CONFIG_SYS_DDR_RAW_TIMING) 377 dram_size = fsl_ddr_sdram(); 378 #else 379 dram_size = fixed_sdram(); 380 #endif 381 dram_size = setup_ddr_tlbs(dram_size / 0x100000); 382 dram_size *= 0x100000; 383 384 #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) 385 /* 386 * Initialize and enable DDR ECC. 387 */ 388 ddr_enable_ecc(dram_size); 389 #endif 390 391 #if defined(CONFIG_FSL_LBC) 392 /* Some boards also have sdram on the lbc */ 393 lbc_sdram_init(); 394 #endif 395 396 debug("DDR: "); 397 return dram_size; 398 } 399 #endif /* CONFIG_SYS_RAMBOOT */ 400 #endif 401 402 #if CONFIG_POST & CONFIG_SYS_POST_MEMORY 403 404 /* Board-specific functions defined in each board's ddr.c */ 405 void fsl_ddr_get_spd(generic_spd_eeprom_t *ctrl_dimms_spd, 406 unsigned int ctrl_num); 407 void read_tlbcam_entry(int idx, u32 *valid, u32 *tsize, unsigned long *epn, 408 phys_addr_t *rpn); 409 unsigned int 410 setup_ddr_tlbs_phys(phys_addr_t p_addr, unsigned int memsize_in_meg); 411 412 void clear_ddr_tlbs_phys(phys_addr_t p_addr, unsigned int memsize_in_meg); 413 414 static void dump_spd_ddr_reg(void) 415 { 416 int i, j, k, m; 417 u8 *p_8; 418 u32 *p_32; 419 ccsr_ddr_t *ddr[CONFIG_NUM_DDR_CONTROLLERS]; 420 generic_spd_eeprom_t 421 spd[CONFIG_NUM_DDR_CONTROLLERS][CONFIG_DIMM_SLOTS_PER_CTLR]; 422 423 for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) 424 fsl_ddr_get_spd(spd[i], i); 425 426 puts("SPD data of all dimms (zero vaule is omitted)...\n"); 427 puts("Byte (hex) "); 428 k = 1; 429 for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) { 430 for (j = 0; j < CONFIG_DIMM_SLOTS_PER_CTLR; j++) 431 printf("Dimm%d ", k++); 432 } 433 puts("\n"); 434 for (k = 0; k < sizeof(generic_spd_eeprom_t); k++) { 435 m = 0; 436 printf("%3d (0x%02x) ", k, k); 437 for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) { 438 for (j = 0; j < CONFIG_DIMM_SLOTS_PER_CTLR; j++) { 439 p_8 = (u8 *) &spd[i][j]; 440 if (p_8[k]) { 441 printf("0x%02x ", p_8[k]); 442 m++; 443 } else 444 puts(" "); 445 } 446 } 447 if (m) 448 puts("\n"); 449 else 450 puts("\r"); 451 } 452 453 for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) { 454 switch (i) { 455 case 0: 456 ddr[i] = (void *)CONFIG_SYS_FSL_DDR_ADDR; 457 break; 458 #if defined(CONFIG_SYS_FSL_DDR2_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 1) 459 case 1: 460 ddr[i] = (void *)CONFIG_SYS_FSL_DDR2_ADDR; 461 break; 462 #endif 463 #if defined(CONFIG_SYS_FSL_DDR3_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 2) 464 case 2: 465 ddr[i] = (void *)CONFIG_SYS_FSL_DDR3_ADDR; 466 break; 467 #endif 468 #if defined(CONFIG_SYS_FSL_DDR4_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 3) 469 case 3: 470 ddr[i] = (void *)CONFIG_SYS_FSL_DDR4_ADDR; 471 break; 472 #endif 473 default: 474 printf("%s unexpected controller number = %u\n", 475 __func__, i); 476 return; 477 } 478 } 479 printf("DDR registers dump for all controllers " 480 "(zero vaule is omitted)...\n"); 481 puts("Offset (hex) "); 482 for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) 483 printf(" Base + 0x%04x", (u32)ddr[i] & 0xFFFF); 484 puts("\n"); 485 for (k = 0; k < sizeof(ccsr_ddr_t)/4; k++) { 486 m = 0; 487 printf("%6d (0x%04x)", k * 4, k * 4); 488 for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) { 489 p_32 = (u32 *) ddr[i]; 490 if (p_32[k]) { 491 printf(" 0x%08x", p_32[k]); 492 m++; 493 } else 494 puts(" "); 495 } 496 if (m) 497 puts("\n"); 498 else 499 puts("\r"); 500 } 501 puts("\n"); 502 } 503 504 /* invalid the TLBs for DDR and setup new ones to cover p_addr */ 505 static int reset_tlb(phys_addr_t p_addr, u32 size, phys_addr_t *phys_offset) 506 { 507 u32 vstart = CONFIG_SYS_DDR_SDRAM_BASE; 508 unsigned long epn; 509 u32 tsize, valid, ptr; 510 int ddr_esel; 511 512 clear_ddr_tlbs_phys(p_addr, size>>20); 513 514 /* Setup new tlb to cover the physical address */ 515 setup_ddr_tlbs_phys(p_addr, size>>20); 516 517 ptr = vstart; 518 ddr_esel = find_tlb_idx((void *)ptr, 1); 519 if (ddr_esel != -1) { 520 read_tlbcam_entry(ddr_esel, &valid, &tsize, &epn, phys_offset); 521 } else { 522 printf("TLB error in function %s\n", __func__); 523 return -1; 524 } 525 526 return 0; 527 } 528 529 /* 530 * slide the testing window up to test another area 531 * for 32_bit system, the maximum testable memory is limited to 532 * CONFIG_MAX_MEM_MAPPED 533 */ 534 int arch_memory_test_advance(u32 *vstart, u32 *size, phys_addr_t *phys_offset) 535 { 536 phys_addr_t test_cap, p_addr; 537 phys_size_t p_size = min(gd->ram_size, CONFIG_MAX_MEM_MAPPED); 538 539 #if !defined(CONFIG_PHYS_64BIT) || \ 540 !defined(CONFIG_SYS_INIT_RAM_ADDR_PHYS) || \ 541 (CONFIG_SYS_INIT_RAM_ADDR_PHYS < 0x100000000ull) 542 test_cap = p_size; 543 #else 544 test_cap = gd->ram_size; 545 #endif 546 p_addr = (*vstart) + (*size) + (*phys_offset); 547 if (p_addr < test_cap - 1) { 548 p_size = min(test_cap - p_addr, CONFIG_MAX_MEM_MAPPED); 549 if (reset_tlb(p_addr, p_size, phys_offset) == -1) 550 return -1; 551 *vstart = CONFIG_SYS_DDR_SDRAM_BASE; 552 *size = (u32) p_size; 553 printf("Testing 0x%08llx - 0x%08llx\n", 554 (u64)(*vstart) + (*phys_offset), 555 (u64)(*vstart) + (*phys_offset) + (*size) - 1); 556 } else 557 return 1; 558 559 return 0; 560 } 561 562 /* initialization for testing area */ 563 int arch_memory_test_prepare(u32 *vstart, u32 *size, phys_addr_t *phys_offset) 564 { 565 phys_size_t p_size = min(gd->ram_size, CONFIG_MAX_MEM_MAPPED); 566 567 *vstart = CONFIG_SYS_DDR_SDRAM_BASE; 568 *size = (u32) p_size; /* CONFIG_MAX_MEM_MAPPED < 4G */ 569 *phys_offset = 0; 570 571 #if !defined(CONFIG_PHYS_64BIT) || \ 572 !defined(CONFIG_SYS_INIT_RAM_ADDR_PHYS) || \ 573 (CONFIG_SYS_INIT_RAM_ADDR_PHYS < 0x100000000ull) 574 if (gd->ram_size > CONFIG_MAX_MEM_MAPPED) { 575 puts("Cannot test more than "); 576 print_size(CONFIG_MAX_MEM_MAPPED, 577 " without proper 36BIT support.\n"); 578 } 579 #endif 580 printf("Testing 0x%08llx - 0x%08llx\n", 581 (u64)(*vstart) + (*phys_offset), 582 (u64)(*vstart) + (*phys_offset) + (*size) - 1); 583 584 return 0; 585 } 586 587 /* invalid TLBs for DDR and remap as normal after testing */ 588 int arch_memory_test_cleanup(u32 *vstart, u32 *size, phys_addr_t *phys_offset) 589 { 590 unsigned long epn; 591 u32 tsize, valid, ptr; 592 phys_addr_t rpn = 0; 593 int ddr_esel; 594 595 /* disable the TLBs for this testing */ 596 ptr = *vstart; 597 598 while (ptr < (*vstart) + (*size)) { 599 ddr_esel = find_tlb_idx((void *)ptr, 1); 600 if (ddr_esel != -1) { 601 read_tlbcam_entry(ddr_esel, &valid, &tsize, &epn, &rpn); 602 disable_tlb(ddr_esel); 603 } 604 ptr += TSIZE_TO_BYTES(tsize); 605 } 606 607 puts("Remap DDR "); 608 setup_ddr_tlbs(gd->ram_size>>20); 609 puts("\n"); 610 611 return 0; 612 } 613 614 void arch_memory_failure_handle(void) 615 { 616 dump_spd_ddr_reg(); 617 } 618 #endif 619