1 /* 2 * Freescale SerDes initialization routine 3 * 4 * Copyright (C) 2007 Freescale Semicondutor, Inc. 5 * Copyright (C) 2008 MontaVista Software, Inc. 6 * 7 * Author: Li Yang <leoli@freescale.com> 8 * 9 * This program is free software; you can redistribute it and/or modify it 10 * under the terms of the GNU General Public License as published by the 11 * Free Software Foundation; either version 2 of the License, or (at your 12 * option) any later version. 13 */ 14 15 #include <config.h> 16 #include <common.h> 17 #include <asm/io.h> 18 #include <asm/fsl_serdes.h> 19 20 /* SerDes registers */ 21 #define FSL_SRDSCR0_OFFS 0x0 22 #define FSL_SRDSCR0_DPP_1V2 0x00008800 23 #define FSL_SRDSCR1_OFFS 0x4 24 #define FSL_SRDSCR1_PLLBW 0x00000040 25 #define FSL_SRDSCR2_OFFS 0x8 26 #define FSL_SRDSCR2_VDD_1V2 0x00800000 27 #define FSL_SRDSCR2_SEIC_MASK 0x00001c1c 28 #define FSL_SRDSCR2_SEIC_SATA 0x00001414 29 #define FSL_SRDSCR2_SEIC_PEX 0x00001010 30 #define FSL_SRDSCR2_SEIC_SGMII 0x00000101 31 #define FSL_SRDSCR3_OFFS 0xc 32 #define FSL_SRDSCR3_KFR_SATA 0x10100000 33 #define FSL_SRDSCR3_KPH_SATA 0x04040000 34 #define FSL_SRDSCR3_SDFM_SATA_PEX 0x01010000 35 #define FSL_SRDSCR3_SDTXL_SATA 0x00000505 36 #define FSL_SRDSCR4_OFFS 0x10 37 #define FSL_SRDSCR4_PROT_SATA 0x00000808 38 #define FSL_SRDSCR4_PROT_PEX 0x00000101 39 #define FSL_SRDSCR4_PROT_SGMII 0x00000505 40 #define FSL_SRDSCR4_PLANE_X2 0x01000000 41 #define FSL_SRDSRSTCTL_OFFS 0x20 42 #define FSL_SRDSRSTCTL_RST 0x80000000 43 #define FSL_SRDSRSTCTL_SATA_RESET 0xf 44 45 void fsl_setup_serdes(u32 offset, char proto, u32 rfcks, char vdd) 46 { 47 void *regs = (void *)CONFIG_SYS_IMMR + offset; 48 u32 tmp; 49 50 /* 1.0V corevdd */ 51 if (vdd) { 52 /* DPPE/DPPA = 0 */ 53 tmp = in_be32(regs + FSL_SRDSCR0_OFFS); 54 tmp &= ~FSL_SRDSCR0_DPP_1V2; 55 out_be32(regs + FSL_SRDSCR0_OFFS, tmp); 56 57 /* VDD = 0 */ 58 tmp = in_be32(regs + FSL_SRDSCR2_OFFS); 59 tmp &= ~FSL_SRDSCR2_VDD_1V2; 60 out_be32(regs + FSL_SRDSCR2_OFFS, tmp); 61 } 62 63 /* protocol specific configuration */ 64 switch (proto) { 65 case FSL_SERDES_PROTO_SATA: 66 /* Set and clear reset bits */ 67 tmp = in_be32(regs + FSL_SRDSRSTCTL_OFFS); 68 tmp |= FSL_SRDSRSTCTL_SATA_RESET; 69 out_be32(regs + FSL_SRDSRSTCTL_OFFS, tmp); 70 udelay(1000); 71 tmp &= ~FSL_SRDSRSTCTL_SATA_RESET; 72 out_be32(regs + FSL_SRDSRSTCTL_OFFS, tmp); 73 74 /* Configure SRDSCR1 */ 75 tmp = in_be32(regs + FSL_SRDSCR1_OFFS); 76 tmp &= ~FSL_SRDSCR1_PLLBW; 77 out_be32(regs + FSL_SRDSCR1_OFFS, tmp); 78 79 /* Configure SRDSCR2 */ 80 tmp = in_be32(regs + FSL_SRDSCR2_OFFS); 81 tmp &= ~FSL_SRDSCR2_SEIC_MASK; 82 tmp |= FSL_SRDSCR2_SEIC_SATA; 83 out_be32(regs + FSL_SRDSCR2_OFFS, tmp); 84 85 /* Configure SRDSCR3 */ 86 tmp = FSL_SRDSCR3_KFR_SATA | FSL_SRDSCR3_KPH_SATA | 87 FSL_SRDSCR3_SDFM_SATA_PEX | 88 FSL_SRDSCR3_SDTXL_SATA; 89 out_be32(regs + FSL_SRDSCR3_OFFS, tmp); 90 91 /* Configure SRDSCR4 */ 92 tmp = rfcks | FSL_SRDSCR4_PROT_SATA; 93 out_be32(regs + FSL_SRDSCR4_OFFS, tmp); 94 break; 95 case FSL_SERDES_PROTO_PEX: 96 case FSL_SERDES_PROTO_PEX_X2: 97 /* Configure SRDSCR1 */ 98 tmp = in_be32(regs + FSL_SRDSCR1_OFFS); 99 tmp |= FSL_SRDSCR1_PLLBW; 100 out_be32(regs + FSL_SRDSCR1_OFFS, tmp); 101 102 /* Configure SRDSCR2 */ 103 tmp = in_be32(regs + FSL_SRDSCR2_OFFS); 104 tmp &= ~FSL_SRDSCR2_SEIC_MASK; 105 tmp |= FSL_SRDSCR2_SEIC_PEX; 106 out_be32(regs + FSL_SRDSCR2_OFFS, tmp); 107 108 /* Configure SRDSCR3 */ 109 tmp = FSL_SRDSCR3_SDFM_SATA_PEX; 110 out_be32(regs + FSL_SRDSCR3_OFFS, tmp); 111 112 /* Configure SRDSCR4 */ 113 tmp = rfcks | FSL_SRDSCR4_PROT_PEX; 114 if (proto == FSL_SERDES_PROTO_PEX_X2) 115 tmp |= FSL_SRDSCR4_PLANE_X2; 116 out_be32(regs + FSL_SRDSCR4_OFFS, tmp); 117 break; 118 case FSL_SERDES_PROTO_SGMII: 119 /* Configure SRDSCR1 */ 120 tmp = in_be32(regs + FSL_SRDSCR1_OFFS); 121 tmp &= ~FSL_SRDSCR1_PLLBW; 122 out_be32(regs + FSL_SRDSCR1_OFFS, tmp); 123 124 /* Configure SRDSCR2 */ 125 tmp = in_be32(regs + FSL_SRDSCR2_OFFS); 126 tmp &= ~FSL_SRDSCR2_SEIC_MASK; 127 tmp |= FSL_SRDSCR2_SEIC_SGMII; 128 out_be32(regs + FSL_SRDSCR2_OFFS, tmp); 129 130 /* Configure SRDSCR3 */ 131 out_be32(regs + FSL_SRDSCR3_OFFS, 0); 132 133 /* Configure SRDSCR4 */ 134 tmp = rfcks | FSL_SRDSCR4_PROT_SGMII; 135 out_be32(regs + FSL_SRDSCR4_OFFS, tmp); 136 break; 137 default: 138 return; 139 } 140 141 /* Do a software reset */ 142 tmp = in_be32(regs + FSL_SRDSRSTCTL_OFFS); 143 tmp |= FSL_SRDSRSTCTL_RST; 144 out_be32(regs + FSL_SRDSRSTCTL_OFFS, tmp); 145 } 146