xref: /openbmc/u-boot/arch/powerpc/cpu/mpc83xx/ecc.c (revision 23ff8633)
1 /*
2  * Copyright (C) 2007-2011 Freescale Semiconductor, Inc.
3  *
4  * Dave Liu <daveliu@freescale.com>
5  * based on the contribution of Marian Balakowicz <m8@semihalf.com>
6  *
7  * SPDX-License-Identifier:	GPL-2.0+
8  */
9 
10 #include <common.h>
11 #include <mpc83xx.h>
12 #include <command.h>
13 
14 #if defined(CONFIG_DDR_ECC) && defined(CONFIG_DDR_ECC_CMD)
15 void ecc_print_status(void)
16 {
17 	immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
18 #ifdef CONFIG_SYS_FSL_DDR2
19 	struct ccsr_ddr __iomem *ddr = &immap->ddr;
20 #else
21 	ddr83xx_t *ddr = &immap->ddr;
22 #endif
23 
24 	printf("\nECC mode: %s\n\n",
25 	       (ddr->sdram_cfg & SDRAM_CFG_ECC_EN) ? "ON" : "OFF");
26 
27 	/* Interrupts */
28 	printf("Memory Error Interrupt Enable:\n");
29 	printf("  Multiple-Bit Error Interrupt Enable: %d\n",
30 	       (ddr->err_int_en & ECC_ERR_INT_EN_MBEE) ? 1 : 0);
31 	printf("  Single-Bit Error Interrupt Enable: %d\n",
32 	       (ddr->err_int_en & ECC_ERR_INT_EN_SBEE) ? 1 : 0);
33 	printf("  Memory Select Error Interrupt Enable: %d\n\n",
34 	       (ddr->err_int_en & ECC_ERR_INT_EN_MSEE) ? 1 : 0);
35 
36 	/* Error disable */
37 	printf("Memory Error Disable:\n");
38 	printf("  Multiple-Bit Error Disable: %d\n",
39 	       (ddr->err_disable & ECC_ERROR_DISABLE_MBED) ? 1 : 0);
40 	printf("  Single-Bit Error Disable: %d\n",
41 	       (ddr->err_disable & ECC_ERROR_DISABLE_SBED) ? 1 : 0);
42 	printf("  Memory Select Error Disable: %d\n\n",
43 	       (ddr->err_disable & ECC_ERROR_DISABLE_MSED) ? 1 : 0);
44 
45 	/* Error injection */
46 	printf("Memory Data Path Error Injection Mask High/Low: %08x %08x\n",
47 	       ddr->data_err_inject_hi, ddr->data_err_inject_lo);
48 
49 	printf("Memory Data Path Error Injection Mask ECC:\n");
50 	printf("  ECC Mirror Byte: %d\n",
51 	       (ddr->ecc_err_inject & ECC_ERR_INJECT_EMB) ? 1 : 0);
52 	printf("  ECC Injection Enable: %d\n",
53 	       (ddr->ecc_err_inject & ECC_ERR_INJECT_EIEN) ? 1 : 0);
54 	printf("  ECC Error Injection Mask: 0x%02x\n\n",
55 	       ddr->ecc_err_inject & ECC_ERR_INJECT_EEIM);
56 
57 	/* SBE counter/threshold */
58 	printf("Memory Single-Bit Error Management (0..255):\n");
59 	printf("  Single-Bit Error Threshold: %d\n",
60 	       (ddr->err_sbe & ECC_ERROR_MAN_SBET) >> ECC_ERROR_MAN_SBET_SHIFT);
61 	printf("  Single-Bit Error Counter: %d\n\n",
62 	       (ddr->err_sbe & ECC_ERROR_MAN_SBEC) >> ECC_ERROR_MAN_SBEC_SHIFT);
63 
64 	/* Error detect */
65 	printf("Memory Error Detect:\n");
66 	printf("  Multiple Memory Errors: %d\n",
67 	       (ddr->err_detect & ECC_ERROR_DETECT_MME) ? 1 : 0);
68 	printf("  Multiple-Bit Error: %d\n",
69 	       (ddr->err_detect & ECC_ERROR_DETECT_MBE) ? 1 : 0);
70 	printf("  Single-Bit Error: %d\n",
71 	       (ddr->err_detect & ECC_ERROR_DETECT_SBE) ? 1 : 0);
72 	printf("  Memory Select Error: %d\n\n",
73 	       (ddr->err_detect & ECC_ERROR_DETECT_MSE) ? 1 : 0);
74 
75 	/* Capture data */
76 	printf("Memory Error Address Capture: 0x%08x\n", ddr->capture_address);
77 	printf("Memory Data Path Read Capture High/Low: %08x %08x\n",
78 	       ddr->capture_data_hi, ddr->capture_data_lo);
79 	printf("Memory Data Path Read Capture ECC: 0x%02x\n\n",
80 	       ddr->capture_ecc & CAPTURE_ECC_ECE);
81 
82 	printf("Memory Error Attributes Capture:\n");
83 	printf(" Data Beat Number: %d\n",
84 	       (ddr->capture_attributes & ECC_CAPT_ATTR_BNUM) >>
85 	       ECC_CAPT_ATTR_BNUM_SHIFT);
86 	printf("  Transaction Size: %d\n",
87 	       (ddr->capture_attributes & ECC_CAPT_ATTR_TSIZ) >>
88 	       ECC_CAPT_ATTR_TSIZ_SHIFT);
89 	printf("  Transaction Source: %d\n",
90 	       (ddr->capture_attributes & ECC_CAPT_ATTR_TSRC) >>
91 	       ECC_CAPT_ATTR_TSRC_SHIFT);
92 	printf("  Transaction Type: %d\n",
93 	       (ddr->capture_attributes & ECC_CAPT_ATTR_TTYP) >>
94 	       ECC_CAPT_ATTR_TTYP_SHIFT);
95 	printf("  Error Information Valid: %d\n\n",
96 	       ddr->capture_attributes & ECC_CAPT_ATTR_VLD);
97 }
98 
99 int do_ecc(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
100 {
101 	immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
102 #ifdef CONFIG_SYS_FSL_DDR2
103 	struct ccsr_ddr __iomem *ddr = &immap->ddr;
104 #else
105 	ddr83xx_t *ddr = &immap->ddr;
106 #endif
107 	volatile u32 val;
108 	u64 *addr;
109 	u32 count;
110 	register u64 *i;
111 	u32 ret[2];
112 	u32 pattern[2];
113 	u32 writeback[2];
114 
115 	/* The pattern is written into memory to generate error */
116 	pattern[0] = 0xfedcba98UL;
117 	pattern[1] = 0x76543210UL;
118 
119 	/* After injecting error, re-initialize the memory with the value */
120 	writeback[0] = 0x01234567UL;
121 	writeback[1] = 0x89abcdefUL;
122 
123 	if (argc > 4)
124 		return cmd_usage(cmdtp);
125 
126 	if (argc == 2) {
127 		if (strcmp(argv[1], "status") == 0) {
128 			ecc_print_status();
129 			return 0;
130 		} else if (strcmp(argv[1], "captureclear") == 0) {
131 			ddr->capture_address = 0;
132 			ddr->capture_data_hi = 0;
133 			ddr->capture_data_lo = 0;
134 			ddr->capture_ecc = 0;
135 			ddr->capture_attributes = 0;
136 			return 0;
137 		}
138 	}
139 	if (argc == 3) {
140 		if (strcmp(argv[1], "sbecnt") == 0) {
141 			val = simple_strtoul(argv[2], NULL, 10);
142 			if (val > 255) {
143 				printf("Incorrect Counter value, "
144 				       "should be 0..255\n");
145 				return 1;
146 			}
147 
148 			val = (val << ECC_ERROR_MAN_SBEC_SHIFT);
149 			val |= (ddr->err_sbe & ECC_ERROR_MAN_SBET);
150 
151 			ddr->err_sbe = val;
152 			return 0;
153 		} else if (strcmp(argv[1], "sbethr") == 0) {
154 			val = simple_strtoul(argv[2], NULL, 10);
155 			if (val > 255) {
156 				printf("Incorrect Counter value, "
157 				       "should be 0..255\n");
158 				return 1;
159 			}
160 
161 			val = (val << ECC_ERROR_MAN_SBET_SHIFT);
162 			val |= (ddr->err_sbe & ECC_ERROR_MAN_SBEC);
163 
164 			ddr->err_sbe = val;
165 			return 0;
166 		} else if (strcmp(argv[1], "errdisable") == 0) {
167 			val = ddr->err_disable;
168 
169 			if (strcmp(argv[2], "+sbe") == 0) {
170 				val |= ECC_ERROR_DISABLE_SBED;
171 			} else if (strcmp(argv[2], "+mbe") == 0) {
172 				val |= ECC_ERROR_DISABLE_MBED;
173 			} else if (strcmp(argv[2], "+mse") == 0) {
174 				val |= ECC_ERROR_DISABLE_MSED;
175 			} else if (strcmp(argv[2], "+all") == 0) {
176 				val |= (ECC_ERROR_DISABLE_SBED |
177 					ECC_ERROR_DISABLE_MBED |
178 					ECC_ERROR_DISABLE_MSED);
179 			} else if (strcmp(argv[2], "-sbe") == 0) {
180 				val &= ~ECC_ERROR_DISABLE_SBED;
181 			} else if (strcmp(argv[2], "-mbe") == 0) {
182 				val &= ~ECC_ERROR_DISABLE_MBED;
183 			} else if (strcmp(argv[2], "-mse") == 0) {
184 				val &= ~ECC_ERROR_DISABLE_MSED;
185 			} else if (strcmp(argv[2], "-all") == 0) {
186 				val &= ~(ECC_ERROR_DISABLE_SBED |
187 					 ECC_ERROR_DISABLE_MBED |
188 					 ECC_ERROR_DISABLE_MSED);
189 			} else {
190 				printf("Incorrect err_disable field\n");
191 				return 1;
192 			}
193 
194 			ddr->err_disable = val;
195 			__asm__ __volatile__("sync");
196 			__asm__ __volatile__("isync");
197 			return 0;
198 		} else if (strcmp(argv[1], "errdetectclr") == 0) {
199 			val = ddr->err_detect;
200 
201 			if (strcmp(argv[2], "mme") == 0) {
202 				val |= ECC_ERROR_DETECT_MME;
203 			} else if (strcmp(argv[2], "sbe") == 0) {
204 				val |= ECC_ERROR_DETECT_SBE;
205 			} else if (strcmp(argv[2], "mbe") == 0) {
206 				val |= ECC_ERROR_DETECT_MBE;
207 			} else if (strcmp(argv[2], "mse") == 0) {
208 				val |= ECC_ERROR_DETECT_MSE;
209 			} else if (strcmp(argv[2], "all") == 0) {
210 				val |= (ECC_ERROR_DETECT_MME |
211 					ECC_ERROR_DETECT_MBE |
212 					ECC_ERROR_DETECT_SBE |
213 					ECC_ERROR_DETECT_MSE);
214 			} else {
215 				printf("Incorrect err_detect field\n");
216 				return 1;
217 			}
218 
219 			ddr->err_detect = val;
220 			return 0;
221 		} else if (strcmp(argv[1], "injectdatahi") == 0) {
222 			val = simple_strtoul(argv[2], NULL, 16);
223 
224 			ddr->data_err_inject_hi = val;
225 			return 0;
226 		} else if (strcmp(argv[1], "injectdatalo") == 0) {
227 			val = simple_strtoul(argv[2], NULL, 16);
228 
229 			ddr->data_err_inject_lo = val;
230 			return 0;
231 		} else if (strcmp(argv[1], "injectecc") == 0) {
232 			val = simple_strtoul(argv[2], NULL, 16);
233 			if (val > 0xff) {
234 				printf("Incorrect ECC inject mask, "
235 				       "should be 0x00..0xff\n");
236 				return 1;
237 			}
238 			val |= (ddr->ecc_err_inject & ~ECC_ERR_INJECT_EEIM);
239 
240 			ddr->ecc_err_inject = val;
241 			return 0;
242 		} else if (strcmp(argv[1], "inject") == 0) {
243 			val = ddr->ecc_err_inject;
244 
245 			if (strcmp(argv[2], "en") == 0)
246 				val |= ECC_ERR_INJECT_EIEN;
247 			else if (strcmp(argv[2], "dis") == 0)
248 				val &= ~ECC_ERR_INJECT_EIEN;
249 			else
250 				printf("Incorrect command\n");
251 
252 			ddr->ecc_err_inject = val;
253 			__asm__ __volatile__("sync");
254 			__asm__ __volatile__("isync");
255 			return 0;
256 		} else if (strcmp(argv[1], "mirror") == 0) {
257 			val = ddr->ecc_err_inject;
258 
259 			if (strcmp(argv[2], "en") == 0)
260 				val |= ECC_ERR_INJECT_EMB;
261 			else if (strcmp(argv[2], "dis") == 0)
262 				val &= ~ECC_ERR_INJECT_EMB;
263 			else
264 				printf("Incorrect command\n");
265 
266 			ddr->ecc_err_inject = val;
267 			return 0;
268 		}
269 	}
270 	if (argc == 4) {
271 		if (strcmp(argv[1], "testdw") == 0) {
272 			addr = (u64 *) simple_strtoul(argv[2], NULL, 16);
273 			count = simple_strtoul(argv[3], NULL, 16);
274 
275 			if ((u32) addr % 8) {
276 				printf("Address not aligned on "
277 				       "double word boundary\n");
278 				return 1;
279 			}
280 			disable_interrupts();
281 
282 			for (i = addr; i < addr + count; i++) {
283 
284 				/* enable injects */
285 				ddr->ecc_err_inject |= ECC_ERR_INJECT_EIEN;
286 				__asm__ __volatile__("sync");
287 				__asm__ __volatile__("isync");
288 
289 				/* write memory location injecting errors */
290 				ppcDWstore((u32 *) i, pattern);
291 				__asm__ __volatile__("sync");
292 
293 				/* disable injects */
294 				ddr->ecc_err_inject &= ~ECC_ERR_INJECT_EIEN;
295 				__asm__ __volatile__("sync");
296 				__asm__ __volatile__("isync");
297 
298 				/* read data, this generates ECC error */
299 				ppcDWload((u32 *) i, ret);
300 				__asm__ __volatile__("sync");
301 
302 				/* re-initialize memory, double word write the location again,
303 				 * generates new ECC code this time */
304 				ppcDWstore((u32 *) i, writeback);
305 				__asm__ __volatile__("sync");
306 			}
307 			enable_interrupts();
308 			return 0;
309 		}
310 		if (strcmp(argv[1], "testword") == 0) {
311 			addr = (u64 *) simple_strtoul(argv[2], NULL, 16);
312 			count = simple_strtoul(argv[3], NULL, 16);
313 
314 			if ((u32) addr % 8) {
315 				printf("Address not aligned on "
316 				       "double word boundary\n");
317 				return 1;
318 			}
319 			disable_interrupts();
320 
321 			for (i = addr; i < addr + count; i++) {
322 
323 				/* enable injects */
324 				ddr->ecc_err_inject |= ECC_ERR_INJECT_EIEN;
325 				__asm__ __volatile__("sync");
326 				__asm__ __volatile__("isync");
327 
328 				/* write memory location injecting errors */
329 				*(u32 *) i = 0xfedcba98UL;
330 				__asm__ __volatile__("sync");
331 
332 				/* sub double word write,
333 				 * bus will read-modify-write,
334 				 * generates ECC error */
335 				*((u32 *) i + 1) = 0x76543210UL;
336 				__asm__ __volatile__("sync");
337 
338 				/* disable injects */
339 				ddr->ecc_err_inject &= ~ECC_ERR_INJECT_EIEN;
340 				__asm__ __volatile__("sync");
341 				__asm__ __volatile__("isync");
342 
343 				/* re-initialize memory,
344 				 * double word write the location again,
345 				 * generates new ECC code this time */
346 				ppcDWstore((u32 *) i, writeback);
347 				__asm__ __volatile__("sync");
348 			}
349 			enable_interrupts();
350 			return 0;
351 		}
352 	}
353 	return cmd_usage(cmdtp);
354 }
355 
356 U_BOOT_CMD(ecc, 4, 0, do_ecc,
357 	   "support for DDR ECC features",
358 	   "status              - print out status info\n"
359 	   "ecc captureclear        - clear capture regs data\n"
360 	   "ecc sbecnt <val>        - set Single-Bit Error counter\n"
361 	   "ecc sbethr <val>        - set Single-Bit Threshold\n"
362 	   "ecc errdisable <flag>   - clear/set disable Memory Error Disable, flag:\n"
363 	   "  [-|+]sbe - Single-Bit Error\n"
364 	   "  [-|+]mbe - Multiple-Bit Error\n"
365 	   "  [-|+]mse - Memory Select Error\n"
366 	   "  [-|+]all - all errors\n"
367 	   "ecc errdetectclr <flag> - clear Memory Error Detect, flag:\n"
368 	   "  mme - Multiple Memory Errors\n"
369 	   "  sbe - Single-Bit Error\n"
370 	   "  mbe - Multiple-Bit Error\n"
371 	   "  mse - Memory Select Error\n"
372 	   "  all - all errors\n"
373 	   "ecc injectdatahi <hi>  - set Memory Data Path Error Injection Mask High\n"
374 	   "ecc injectdatalo <lo>  - set Memory Data Path Error Injection Mask Low\n"
375 	   "ecc injectecc <ecc>    - set ECC Error Injection Mask\n"
376 	   "ecc inject <en|dis>    - enable/disable error injection\n"
377 	   "ecc mirror <en|dis>    - enable/disable mirror byte\n"
378 	   "ecc testdw <addr> <cnt>  - test mem region with double word access:\n"
379 	   "  - enables injects\n"
380 	   "  - writes pattern injecting errors with double word access\n"
381 	   "  - disables injects\n"
382 	   "  - reads pattern back with double word access, generates error\n"
383 	   "  - re-inits memory\n"
384 	   "ecc testword <addr> <cnt>  - test mem region with word access:\n"
385 	   "  - enables injects\n"
386 	   "  - writes pattern injecting errors with word access\n"
387 	   "  - writes pattern with word access, generates error\n"
388 	   "  - disables injects\n" "  - re-inits memory");
389 #endif
390