1 /* 2 * Copyright (C) 2004-2009 Freescale Semiconductor, Inc. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 #include <common.h> 8 #include <mpc83xx.h> 9 #include <ioports.h> 10 #include <asm/io.h> 11 #include <asm/processor.h> 12 #ifdef CONFIG_USB_EHCI_FSL 13 #include <usb/ehci-ci.h> 14 #endif 15 16 DECLARE_GLOBAL_DATA_PTR; 17 18 #ifdef CONFIG_QE 19 extern qe_iop_conf_t qe_iop_conf_tab[]; 20 extern void qe_config_iopin(u8 port, u8 pin, int dir, 21 int open_drain, int assign); 22 extern void qe_init(uint qe_base); 23 extern void qe_reset(void); 24 25 static void config_qe_ioports(void) 26 { 27 u8 port, pin; 28 int dir, open_drain, assign; 29 int i; 30 31 for (i = 0; qe_iop_conf_tab[i].assign != QE_IOP_TAB_END; i++) { 32 port = qe_iop_conf_tab[i].port; 33 pin = qe_iop_conf_tab[i].pin; 34 dir = qe_iop_conf_tab[i].dir; 35 open_drain = qe_iop_conf_tab[i].open_drain; 36 assign = qe_iop_conf_tab[i].assign; 37 qe_config_iopin(port, pin, dir, open_drain, assign); 38 } 39 } 40 #endif 41 42 /* 43 * Breathe some life into the CPU... 44 * 45 * Set up the memory map, 46 * initialize a bunch of registers, 47 * initialize the UPM's 48 */ 49 void cpu_init_f (volatile immap_t * im) 50 { 51 __be32 acr_mask = 52 #ifdef CONFIG_SYS_ACR_PIPE_DEP /* Arbiter pipeline depth */ 53 ACR_PIPE_DEP | 54 #endif 55 #ifdef CONFIG_SYS_ACR_RPTCNT /* Arbiter repeat count */ 56 ACR_RPTCNT | 57 #endif 58 #ifdef CONFIG_SYS_ACR_APARK /* Arbiter address parking mode */ 59 ACR_APARK | 60 #endif 61 #ifdef CONFIG_SYS_ACR_PARKM /* Arbiter parking master */ 62 ACR_PARKM | 63 #endif 64 0; 65 __be32 acr_val = 66 #ifdef CONFIG_SYS_ACR_PIPE_DEP /* Arbiter pipeline depth */ 67 (CONFIG_SYS_ACR_PIPE_DEP << ACR_PIPE_DEP_SHIFT) | 68 #endif 69 #ifdef CONFIG_SYS_ACR_RPTCNT /* Arbiter repeat count */ 70 (CONFIG_SYS_ACR_RPTCNT << ACR_RPTCNT_SHIFT) | 71 #endif 72 #ifdef CONFIG_SYS_ACR_APARK /* Arbiter address parking mode */ 73 (CONFIG_SYS_ACR_APARK << ACR_APARK_SHIFT) | 74 #endif 75 #ifdef CONFIG_SYS_ACR_PARKM /* Arbiter parking master */ 76 (CONFIG_SYS_ACR_PARKM << ACR_PARKM_SHIFT) | 77 #endif 78 0; 79 __be32 spcr_mask = 80 #ifdef CONFIG_SYS_SPCR_OPT /* Optimize transactions between CSB and other dev */ 81 SPCR_OPT | 82 #endif 83 #ifdef CONFIG_SYS_SPCR_TSECEP /* all eTSEC's Emergency priority */ 84 SPCR_TSECEP | 85 #endif 86 #ifdef CONFIG_SYS_SPCR_TSEC1EP /* TSEC1 Emergency priority */ 87 SPCR_TSEC1EP | 88 #endif 89 #ifdef CONFIG_SYS_SPCR_TSEC2EP /* TSEC2 Emergency priority */ 90 SPCR_TSEC2EP | 91 #endif 92 0; 93 __be32 spcr_val = 94 #ifdef CONFIG_SYS_SPCR_OPT 95 (CONFIG_SYS_SPCR_OPT << SPCR_OPT_SHIFT) | 96 #endif 97 #ifdef CONFIG_SYS_SPCR_TSECEP /* all eTSEC's Emergency priority */ 98 (CONFIG_SYS_SPCR_TSECEP << SPCR_TSECEP_SHIFT) | 99 #endif 100 #ifdef CONFIG_SYS_SPCR_TSEC1EP /* TSEC1 Emergency priority */ 101 (CONFIG_SYS_SPCR_TSEC1EP << SPCR_TSEC1EP_SHIFT) | 102 #endif 103 #ifdef CONFIG_SYS_SPCR_TSEC2EP /* TSEC2 Emergency priority */ 104 (CONFIG_SYS_SPCR_TSEC2EP << SPCR_TSEC2EP_SHIFT) | 105 #endif 106 0; 107 __be32 sccr_mask = 108 #ifdef CONFIG_SYS_SCCR_ENCCM /* Encryption clock mode */ 109 SCCR_ENCCM | 110 #endif 111 #ifdef CONFIG_SYS_SCCR_PCICM /* PCI & DMA clock mode */ 112 SCCR_PCICM | 113 #endif 114 #ifdef CONFIG_SYS_SCCR_PCIEXP1CM /* PCIE1 clock mode */ 115 SCCR_PCIEXP1CM | 116 #endif 117 #ifdef CONFIG_SYS_SCCR_PCIEXP2CM /* PCIE2 clock mode */ 118 SCCR_PCIEXP2CM | 119 #endif 120 #ifdef CONFIG_SYS_SCCR_TSECCM /* all TSEC's clock mode */ 121 SCCR_TSECCM | 122 #endif 123 #ifdef CONFIG_SYS_SCCR_TSEC1CM /* TSEC1 clock mode */ 124 SCCR_TSEC1CM | 125 #endif 126 #ifdef CONFIG_SYS_SCCR_TSEC2CM /* TSEC2 clock mode */ 127 SCCR_TSEC2CM | 128 #endif 129 #ifdef CONFIG_SYS_SCCR_TSEC1ON /* TSEC1 clock switch */ 130 SCCR_TSEC1ON | 131 #endif 132 #ifdef CONFIG_SYS_SCCR_TSEC2ON /* TSEC2 clock switch */ 133 SCCR_TSEC2ON | 134 #endif 135 #ifdef CONFIG_SYS_SCCR_USBMPHCM /* USB MPH clock mode */ 136 SCCR_USBMPHCM | 137 #endif 138 #ifdef CONFIG_SYS_SCCR_USBDRCM /* USB DR clock mode */ 139 SCCR_USBDRCM | 140 #endif 141 #ifdef CONFIG_SYS_SCCR_SATACM /* SATA controller clock mode */ 142 SCCR_SATACM | 143 #endif 144 0; 145 __be32 sccr_val = 146 #ifdef CONFIG_SYS_SCCR_ENCCM /* Encryption clock mode */ 147 (CONFIG_SYS_SCCR_ENCCM << SCCR_ENCCM_SHIFT) | 148 #endif 149 #ifdef CONFIG_SYS_SCCR_PCICM /* PCI & DMA clock mode */ 150 (CONFIG_SYS_SCCR_PCICM << SCCR_PCICM_SHIFT) | 151 #endif 152 #ifdef CONFIG_SYS_SCCR_PCIEXP1CM /* PCIE1 clock mode */ 153 (CONFIG_SYS_SCCR_PCIEXP1CM << SCCR_PCIEXP1CM_SHIFT) | 154 #endif 155 #ifdef CONFIG_SYS_SCCR_PCIEXP2CM /* PCIE2 clock mode */ 156 (CONFIG_SYS_SCCR_PCIEXP2CM << SCCR_PCIEXP2CM_SHIFT) | 157 #endif 158 #ifdef CONFIG_SYS_SCCR_TSECCM /* all TSEC's clock mode */ 159 (CONFIG_SYS_SCCR_TSECCM << SCCR_TSECCM_SHIFT) | 160 #endif 161 #ifdef CONFIG_SYS_SCCR_TSEC1CM /* TSEC1 clock mode */ 162 (CONFIG_SYS_SCCR_TSEC1CM << SCCR_TSEC1CM_SHIFT) | 163 #endif 164 #ifdef CONFIG_SYS_SCCR_TSEC2CM /* TSEC2 clock mode */ 165 (CONFIG_SYS_SCCR_TSEC2CM << SCCR_TSEC2CM_SHIFT) | 166 #endif 167 #ifdef CONFIG_SYS_SCCR_TSEC1ON /* TSEC1 clock switch */ 168 (CONFIG_SYS_SCCR_TSEC1ON << SCCR_TSEC1ON_SHIFT) | 169 #endif 170 #ifdef CONFIG_SYS_SCCR_TSEC2ON /* TSEC2 clock switch */ 171 (CONFIG_SYS_SCCR_TSEC2ON << SCCR_TSEC2ON_SHIFT) | 172 #endif 173 #ifdef CONFIG_SYS_SCCR_USBMPHCM /* USB MPH clock mode */ 174 (CONFIG_SYS_SCCR_USBMPHCM << SCCR_USBMPHCM_SHIFT) | 175 #endif 176 #ifdef CONFIG_SYS_SCCR_USBDRCM /* USB DR clock mode */ 177 (CONFIG_SYS_SCCR_USBDRCM << SCCR_USBDRCM_SHIFT) | 178 #endif 179 #ifdef CONFIG_SYS_SCCR_SATACM /* SATA controller clock mode */ 180 (CONFIG_SYS_SCCR_SATACM << SCCR_SATACM_SHIFT) | 181 #endif 182 0; 183 __be32 lcrr_mask = 184 #ifdef CONFIG_SYS_LCRR_DBYP /* PLL bypass */ 185 LCRR_DBYP | 186 #endif 187 #ifdef CONFIG_SYS_LCRR_EADC /* external address delay */ 188 LCRR_EADC | 189 #endif 190 #ifdef CONFIG_SYS_LCRR_CLKDIV /* system clock divider */ 191 LCRR_CLKDIV | 192 #endif 193 0; 194 __be32 lcrr_val = 195 #ifdef CONFIG_SYS_LCRR_DBYP /* PLL bypass */ 196 CONFIG_SYS_LCRR_DBYP | 197 #endif 198 #ifdef CONFIG_SYS_LCRR_EADC 199 CONFIG_SYS_LCRR_EADC | 200 #endif 201 #ifdef CONFIG_SYS_LCRR_CLKDIV /* system clock divider */ 202 CONFIG_SYS_LCRR_CLKDIV | 203 #endif 204 0; 205 206 /* Pointer is writable since we allocated a register for it */ 207 gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET); 208 209 /* global data region was cleared in start.S */ 210 211 /* system performance tweaking */ 212 clrsetbits_be32(&im->arbiter.acr, acr_mask, acr_val); 213 214 clrsetbits_be32(&im->sysconf.spcr, spcr_mask, spcr_val); 215 216 clrsetbits_be32(&im->clk.sccr, sccr_mask, sccr_val); 217 218 /* RSR - Reset Status Register - clear all status (4.6.1.3) */ 219 gd->arch.reset_status = __raw_readl(&im->reset.rsr); 220 __raw_writel(~(RSR_RES), &im->reset.rsr); 221 222 /* AER - Arbiter Event Register - store status */ 223 gd->arch.arbiter_event_attributes = __raw_readl(&im->arbiter.aeatr); 224 gd->arch.arbiter_event_address = __raw_readl(&im->arbiter.aeadr); 225 226 /* 227 * RMR - Reset Mode Register 228 * contains checkstop reset enable (4.6.1.4) 229 */ 230 __raw_writel(RMR_CSRE & (1<<RMR_CSRE_SHIFT), &im->reset.rmr); 231 232 /* LCRR - Clock Ratio Register (10.3.1.16) 233 * write, read, and isync per MPC8379ERM rev.1 CLKDEV field description 234 */ 235 clrsetbits_be32(&im->im_lbc.lcrr, lcrr_mask, lcrr_val); 236 __raw_readl(&im->im_lbc.lcrr); 237 isync(); 238 239 /* Enable Time Base & Decrementer ( so we will have udelay() )*/ 240 setbits_be32(&im->sysconf.spcr, SPCR_TBEN); 241 242 /* System General Purpose Register */ 243 #ifdef CONFIG_SYS_SICRH 244 #if defined(CONFIG_MPC834x) || defined(CONFIG_MPC8313) 245 /* regarding to MPC34x manual rev.1 bits 28..29 must be preserved */ 246 __raw_writel((im->sysconf.sicrh & 0x0000000C) | CONFIG_SYS_SICRH, 247 &im->sysconf.sicrh); 248 #else 249 __raw_writel(CONFIG_SYS_SICRH, &im->sysconf.sicrh); 250 #endif 251 #endif 252 #ifdef CONFIG_SYS_SICRL 253 __raw_writel(CONFIG_SYS_SICRL, &im->sysconf.sicrl); 254 #endif 255 #ifdef CONFIG_SYS_GPR1 256 __raw_writel(CONFIG_SYS_GPR1, &im->sysconf.gpr1); 257 #endif 258 #ifdef CONFIG_SYS_DDRCDR /* DDR control driver register */ 259 __raw_writel(CONFIG_SYS_DDRCDR, &im->sysconf.ddrcdr); 260 #endif 261 #ifdef CONFIG_SYS_OBIR /* Output buffer impedance register */ 262 __raw_writel(CONFIG_SYS_OBIR, &im->sysconf.obir); 263 #endif 264 265 #ifdef CONFIG_QE 266 /* Config QE ioports */ 267 config_qe_ioports(); 268 #endif 269 /* Set up preliminary BR/OR regs */ 270 init_early_memctl_regs(); 271 272 /* Local Access window setup */ 273 #if defined(CONFIG_SYS_LBLAWBAR0_PRELIM) && defined(CONFIG_SYS_LBLAWAR0_PRELIM) 274 im->sysconf.lblaw[0].bar = CONFIG_SYS_LBLAWBAR0_PRELIM; 275 im->sysconf.lblaw[0].ar = CONFIG_SYS_LBLAWAR0_PRELIM; 276 #else 277 #error CONFIG_SYS_LBLAWBAR0_PRELIM & CONFIG_SYS_LBLAWAR0_PRELIM must be defined 278 #endif 279 280 #if defined(CONFIG_SYS_LBLAWBAR1_PRELIM) && defined(CONFIG_SYS_LBLAWAR1_PRELIM) 281 im->sysconf.lblaw[1].bar = CONFIG_SYS_LBLAWBAR1_PRELIM; 282 im->sysconf.lblaw[1].ar = CONFIG_SYS_LBLAWAR1_PRELIM; 283 #endif 284 #if defined(CONFIG_SYS_LBLAWBAR2_PRELIM) && defined(CONFIG_SYS_LBLAWAR2_PRELIM) 285 im->sysconf.lblaw[2].bar = CONFIG_SYS_LBLAWBAR2_PRELIM; 286 im->sysconf.lblaw[2].ar = CONFIG_SYS_LBLAWAR2_PRELIM; 287 #endif 288 #if defined(CONFIG_SYS_LBLAWBAR3_PRELIM) && defined(CONFIG_SYS_LBLAWAR3_PRELIM) 289 im->sysconf.lblaw[3].bar = CONFIG_SYS_LBLAWBAR3_PRELIM; 290 im->sysconf.lblaw[3].ar = CONFIG_SYS_LBLAWAR3_PRELIM; 291 #endif 292 #if defined(CONFIG_SYS_LBLAWBAR4_PRELIM) && defined(CONFIG_SYS_LBLAWAR4_PRELIM) 293 im->sysconf.lblaw[4].bar = CONFIG_SYS_LBLAWBAR4_PRELIM; 294 im->sysconf.lblaw[4].ar = CONFIG_SYS_LBLAWAR4_PRELIM; 295 #endif 296 #if defined(CONFIG_SYS_LBLAWBAR5_PRELIM) && defined(CONFIG_SYS_LBLAWAR5_PRELIM) 297 im->sysconf.lblaw[5].bar = CONFIG_SYS_LBLAWBAR5_PRELIM; 298 im->sysconf.lblaw[5].ar = CONFIG_SYS_LBLAWAR5_PRELIM; 299 #endif 300 #if defined(CONFIG_SYS_LBLAWBAR6_PRELIM) && defined(CONFIG_SYS_LBLAWAR6_PRELIM) 301 im->sysconf.lblaw[6].bar = CONFIG_SYS_LBLAWBAR6_PRELIM; 302 im->sysconf.lblaw[6].ar = CONFIG_SYS_LBLAWAR6_PRELIM; 303 #endif 304 #if defined(CONFIG_SYS_LBLAWBAR7_PRELIM) && defined(CONFIG_SYS_LBLAWAR7_PRELIM) 305 im->sysconf.lblaw[7].bar = CONFIG_SYS_LBLAWBAR7_PRELIM; 306 im->sysconf.lblaw[7].ar = CONFIG_SYS_LBLAWAR7_PRELIM; 307 #endif 308 #ifdef CONFIG_SYS_GPIO1_PRELIM 309 im->gpio[0].dat = CONFIG_SYS_GPIO1_DAT; 310 im->gpio[0].dir = CONFIG_SYS_GPIO1_DIR; 311 #endif 312 #ifdef CONFIG_SYS_GPIO2_PRELIM 313 im->gpio[1].dat = CONFIG_SYS_GPIO2_DAT; 314 im->gpio[1].dir = CONFIG_SYS_GPIO2_DIR; 315 #endif 316 #if defined(CONFIG_USB_EHCI_FSL) && defined(CONFIG_MPC831x) 317 uint32_t temp; 318 struct usb_ehci *ehci = (struct usb_ehci *)CONFIG_SYS_FSL_USB1_ADDR; 319 320 /* Configure interface. */ 321 setbits_be32(&ehci->control, REFSEL_16MHZ | UTMI_PHY_EN); 322 323 /* Wait for clock to stabilize */ 324 do { 325 temp = __raw_readl(&ehci->control); 326 udelay(1000); 327 } while (!(temp & PHY_CLK_VALID)); 328 #endif 329 } 330 331 int cpu_init_r (void) 332 { 333 #ifdef CONFIG_QE 334 uint qe_base = CONFIG_SYS_IMMR + 0x00100000; /* QE immr base */ 335 336 qe_init(qe_base); 337 qe_reset(); 338 #endif 339 return 0; 340 } 341 342 /* 343 * Print out the bus arbiter event 344 */ 345 #if defined(CONFIG_DISPLAY_AER_FULL) 346 static int print_83xx_arb_event(int force) 347 { 348 static char* event[] = { 349 "Address Time Out", 350 "Data Time Out", 351 "Address Only Transfer Type", 352 "External Control Word Transfer Type", 353 "Reserved Transfer Type", 354 "Transfer Error", 355 "reserved", 356 "reserved" 357 }; 358 static char* master[] = { 359 "e300 Core Data Transaction", 360 "reserved", 361 "e300 Core Instruction Fetch", 362 "reserved", 363 "TSEC1", 364 "TSEC2", 365 "USB MPH", 366 "USB DR", 367 "Encryption Core", 368 "I2C Boot Sequencer", 369 "JTAG", 370 "reserved", 371 "eSDHC", 372 "PCI1", 373 "PCI2", 374 "DMA", 375 "QUICC Engine 00", 376 "QUICC Engine 01", 377 "QUICC Engine 10", 378 "QUICC Engine 11", 379 "reserved", 380 "reserved", 381 "reserved", 382 "reserved", 383 "SATA1", 384 "SATA2", 385 "SATA3", 386 "SATA4", 387 "reserved", 388 "PCI Express 1", 389 "PCI Express 2", 390 "TDM-DMAC" 391 }; 392 static char *transfer[] = { 393 "Address-only, Clean Block", 394 "Address-only, lwarx reservation set", 395 "Single-beat or Burst write", 396 "reserved", 397 "Address-only, Flush Block", 398 "reserved", 399 "Burst write", 400 "reserved", 401 "Address-only, sync", 402 "Address-only, tlbsync", 403 "Single-beat or Burst read", 404 "Single-beat or Burst read", 405 "Address-only, Kill Block", 406 "Address-only, icbi", 407 "Burst read", 408 "reserved", 409 "Address-only, eieio", 410 "reserved", 411 "Single-beat write", 412 "reserved", 413 "ecowx - Illegal single-beat write", 414 "reserved", 415 "reserved", 416 "reserved", 417 "Address-only, TLB Invalidate", 418 "reserved", 419 "Single-beat or Burst read", 420 "reserved", 421 "eciwx - Illegal single-beat read", 422 "reserved", 423 "Burst read", 424 "reserved" 425 }; 426 427 int etype = (gd->arch.arbiter_event_attributes & AEATR_EVENT) 428 >> AEATR_EVENT_SHIFT; 429 int mstr_id = (gd->arch.arbiter_event_attributes & AEATR_MSTR_ID) 430 >> AEATR_MSTR_ID_SHIFT; 431 int tbst = (gd->arch.arbiter_event_attributes & AEATR_TBST) 432 >> AEATR_TBST_SHIFT; 433 int tsize = (gd->arch.arbiter_event_attributes & AEATR_TSIZE) 434 >> AEATR_TSIZE_SHIFT; 435 int ttype = (gd->arch.arbiter_event_attributes & AEATR_TTYPE) 436 >> AEATR_TTYPE_SHIFT; 437 438 if (!force && !gd->arch.arbiter_event_address) 439 return 0; 440 441 puts("Arbiter Event Status:\n"); 442 printf(" Event Address: 0x%08lX\n", 443 gd->arch.arbiter_event_address); 444 printf(" Event Type: 0x%1x = %s\n", etype, event[etype]); 445 printf(" Master ID: 0x%02x = %s\n", mstr_id, master[mstr_id]); 446 printf(" Transfer Size: 0x%1x = %d bytes\n", (tbst<<3) | tsize, 447 tbst ? (tsize ? tsize : 8) : 16 + 8 * tsize); 448 printf(" Transfer Type: 0x%02x = %s\n", ttype, transfer[ttype]); 449 450 return gd->arch.arbiter_event_address; 451 } 452 453 #elif defined(CONFIG_DISPLAY_AER_BRIEF) 454 455 static int print_83xx_arb_event(int force) 456 { 457 if (!force && !gd->arch.arbiter_event_address) 458 return 0; 459 460 printf("Arbiter Event Status: AEATR=0x%08lX, AEADR=0x%08lX\n", 461 gd->arch.arbiter_event_attributes, 462 gd->arch.arbiter_event_address); 463 464 return gd->arch.arbiter_event_address; 465 } 466 #endif /* CONFIG_DISPLAY_AER_xxxx */ 467 468 /* 469 * Figure out the cause of the reset 470 */ 471 int prt_83xx_rsr(void) 472 { 473 static struct { 474 ulong mask; 475 char *desc; 476 } bits[] = { 477 { 478 RSR_SWSR, "Software Soft"}, { 479 RSR_SWHR, "Software Hard"}, { 480 RSR_JSRS, "JTAG Soft"}, { 481 RSR_CSHR, "Check Stop"}, { 482 RSR_SWRS, "Software Watchdog"}, { 483 RSR_BMRS, "Bus Monitor"}, { 484 RSR_SRS, "External/Internal Soft"}, { 485 RSR_HRS, "External/Internal Hard"} 486 }; 487 static int n = ARRAY_SIZE(bits); 488 ulong rsr = gd->arch.reset_status; 489 int i; 490 char *sep; 491 492 puts("Reset Status:"); 493 494 sep = " "; 495 for (i = 0; i < n; i++) 496 if (rsr & bits[i].mask) { 497 printf("%s%s", sep, bits[i].desc); 498 sep = ", "; 499 } 500 puts("\n"); 501 502 #if defined(CONFIG_DISPLAY_AER_FULL) || defined(CONFIG_DISPLAY_AER_BRIEF) 503 print_83xx_arb_event(rsr & RSR_BMRS); 504 #endif 505 puts("\n"); 506 507 return 0; 508 } 509