1 /* 2 * Copyright (C) 2004-2009 Freescale Semiconductor, Inc. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 #include <common.h> 8 #include <mpc83xx.h> 9 #include <ioports.h> 10 #include <asm/io.h> 11 #ifdef CONFIG_USB_EHCI_FSL 12 #include <usb/ehci-ci.h> 13 #endif 14 15 DECLARE_GLOBAL_DATA_PTR; 16 17 #ifdef CONFIG_QE 18 extern qe_iop_conf_t qe_iop_conf_tab[]; 19 extern void qe_config_iopin(u8 port, u8 pin, int dir, 20 int open_drain, int assign); 21 extern void qe_init(uint qe_base); 22 extern void qe_reset(void); 23 24 static void config_qe_ioports(void) 25 { 26 u8 port, pin; 27 int dir, open_drain, assign; 28 int i; 29 30 for (i = 0; qe_iop_conf_tab[i].assign != QE_IOP_TAB_END; i++) { 31 port = qe_iop_conf_tab[i].port; 32 pin = qe_iop_conf_tab[i].pin; 33 dir = qe_iop_conf_tab[i].dir; 34 open_drain = qe_iop_conf_tab[i].open_drain; 35 assign = qe_iop_conf_tab[i].assign; 36 qe_config_iopin(port, pin, dir, open_drain, assign); 37 } 38 } 39 #endif 40 41 /* 42 * Breathe some life into the CPU... 43 * 44 * Set up the memory map, 45 * initialize a bunch of registers, 46 * initialize the UPM's 47 */ 48 void cpu_init_f (volatile immap_t * im) 49 { 50 __be32 acr_mask = 51 #ifdef CONFIG_SYS_ACR_PIPE_DEP /* Arbiter pipeline depth */ 52 ACR_PIPE_DEP | 53 #endif 54 #ifdef CONFIG_SYS_ACR_RPTCNT /* Arbiter repeat count */ 55 ACR_RPTCNT | 56 #endif 57 #ifdef CONFIG_SYS_ACR_APARK /* Arbiter address parking mode */ 58 ACR_APARK | 59 #endif 60 #ifdef CONFIG_SYS_ACR_PARKM /* Arbiter parking master */ 61 ACR_PARKM | 62 #endif 63 0; 64 __be32 acr_val = 65 #ifdef CONFIG_SYS_ACR_PIPE_DEP /* Arbiter pipeline depth */ 66 (CONFIG_SYS_ACR_PIPE_DEP << ACR_PIPE_DEP_SHIFT) | 67 #endif 68 #ifdef CONFIG_SYS_ACR_RPTCNT /* Arbiter repeat count */ 69 (CONFIG_SYS_ACR_RPTCNT << ACR_RPTCNT_SHIFT) | 70 #endif 71 #ifdef CONFIG_SYS_ACR_APARK /* Arbiter address parking mode */ 72 (CONFIG_SYS_ACR_APARK << ACR_APARK_SHIFT) | 73 #endif 74 #ifdef CONFIG_SYS_ACR_PARKM /* Arbiter parking master */ 75 (CONFIG_SYS_ACR_PARKM << ACR_PARKM_SHIFT) | 76 #endif 77 0; 78 __be32 spcr_mask = 79 #ifdef CONFIG_SYS_SPCR_OPT /* Optimize transactions between CSB and other dev */ 80 SPCR_OPT | 81 #endif 82 #ifdef CONFIG_SYS_SPCR_TSECEP /* all eTSEC's Emergency priority */ 83 SPCR_TSECEP | 84 #endif 85 #ifdef CONFIG_SYS_SPCR_TSEC1EP /* TSEC1 Emergency priority */ 86 SPCR_TSEC1EP | 87 #endif 88 #ifdef CONFIG_SYS_SPCR_TSEC2EP /* TSEC2 Emergency priority */ 89 SPCR_TSEC2EP | 90 #endif 91 0; 92 __be32 spcr_val = 93 #ifdef CONFIG_SYS_SPCR_OPT 94 (CONFIG_SYS_SPCR_OPT << SPCR_OPT_SHIFT) | 95 #endif 96 #ifdef CONFIG_SYS_SPCR_TSECEP /* all eTSEC's Emergency priority */ 97 (CONFIG_SYS_SPCR_TSECEP << SPCR_TSECEP_SHIFT) | 98 #endif 99 #ifdef CONFIG_SYS_SPCR_TSEC1EP /* TSEC1 Emergency priority */ 100 (CONFIG_SYS_SPCR_TSEC1EP << SPCR_TSEC1EP_SHIFT) | 101 #endif 102 #ifdef CONFIG_SYS_SPCR_TSEC2EP /* TSEC2 Emergency priority */ 103 (CONFIG_SYS_SPCR_TSEC2EP << SPCR_TSEC2EP_SHIFT) | 104 #endif 105 0; 106 __be32 sccr_mask = 107 #ifdef CONFIG_SYS_SCCR_ENCCM /* Encryption clock mode */ 108 SCCR_ENCCM | 109 #endif 110 #ifdef CONFIG_SYS_SCCR_PCICM /* PCI & DMA clock mode */ 111 SCCR_PCICM | 112 #endif 113 #ifdef CONFIG_SYS_SCCR_PCIEXP1CM /* PCIE1 clock mode */ 114 SCCR_PCIEXP1CM | 115 #endif 116 #ifdef CONFIG_SYS_SCCR_PCIEXP2CM /* PCIE2 clock mode */ 117 SCCR_PCIEXP2CM | 118 #endif 119 #ifdef CONFIG_SYS_SCCR_TSECCM /* all TSEC's clock mode */ 120 SCCR_TSECCM | 121 #endif 122 #ifdef CONFIG_SYS_SCCR_TSEC1CM /* TSEC1 clock mode */ 123 SCCR_TSEC1CM | 124 #endif 125 #ifdef CONFIG_SYS_SCCR_TSEC2CM /* TSEC2 clock mode */ 126 SCCR_TSEC2CM | 127 #endif 128 #ifdef CONFIG_SYS_SCCR_TSEC1ON /* TSEC1 clock switch */ 129 SCCR_TSEC1ON | 130 #endif 131 #ifdef CONFIG_SYS_SCCR_TSEC2ON /* TSEC2 clock switch */ 132 SCCR_TSEC2ON | 133 #endif 134 #ifdef CONFIG_SYS_SCCR_USBMPHCM /* USB MPH clock mode */ 135 SCCR_USBMPHCM | 136 #endif 137 #ifdef CONFIG_SYS_SCCR_USBDRCM /* USB DR clock mode */ 138 SCCR_USBDRCM | 139 #endif 140 #ifdef CONFIG_SYS_SCCR_SATACM /* SATA controller clock mode */ 141 SCCR_SATACM | 142 #endif 143 0; 144 __be32 sccr_val = 145 #ifdef CONFIG_SYS_SCCR_ENCCM /* Encryption clock mode */ 146 (CONFIG_SYS_SCCR_ENCCM << SCCR_ENCCM_SHIFT) | 147 #endif 148 #ifdef CONFIG_SYS_SCCR_PCICM /* PCI & DMA clock mode */ 149 (CONFIG_SYS_SCCR_PCICM << SCCR_PCICM_SHIFT) | 150 #endif 151 #ifdef CONFIG_SYS_SCCR_PCIEXP1CM /* PCIE1 clock mode */ 152 (CONFIG_SYS_SCCR_PCIEXP1CM << SCCR_PCIEXP1CM_SHIFT) | 153 #endif 154 #ifdef CONFIG_SYS_SCCR_PCIEXP2CM /* PCIE2 clock mode */ 155 (CONFIG_SYS_SCCR_PCIEXP2CM << SCCR_PCIEXP2CM_SHIFT) | 156 #endif 157 #ifdef CONFIG_SYS_SCCR_TSECCM /* all TSEC's clock mode */ 158 (CONFIG_SYS_SCCR_TSECCM << SCCR_TSECCM_SHIFT) | 159 #endif 160 #ifdef CONFIG_SYS_SCCR_TSEC1CM /* TSEC1 clock mode */ 161 (CONFIG_SYS_SCCR_TSEC1CM << SCCR_TSEC1CM_SHIFT) | 162 #endif 163 #ifdef CONFIG_SYS_SCCR_TSEC2CM /* TSEC2 clock mode */ 164 (CONFIG_SYS_SCCR_TSEC2CM << SCCR_TSEC2CM_SHIFT) | 165 #endif 166 #ifdef CONFIG_SYS_SCCR_TSEC1ON /* TSEC1 clock switch */ 167 (CONFIG_SYS_SCCR_TSEC1ON << SCCR_TSEC1ON_SHIFT) | 168 #endif 169 #ifdef CONFIG_SYS_SCCR_TSEC2ON /* TSEC2 clock switch */ 170 (CONFIG_SYS_SCCR_TSEC2ON << SCCR_TSEC2ON_SHIFT) | 171 #endif 172 #ifdef CONFIG_SYS_SCCR_USBMPHCM /* USB MPH clock mode */ 173 (CONFIG_SYS_SCCR_USBMPHCM << SCCR_USBMPHCM_SHIFT) | 174 #endif 175 #ifdef CONFIG_SYS_SCCR_USBDRCM /* USB DR clock mode */ 176 (CONFIG_SYS_SCCR_USBDRCM << SCCR_USBDRCM_SHIFT) | 177 #endif 178 #ifdef CONFIG_SYS_SCCR_SATACM /* SATA controller clock mode */ 179 (CONFIG_SYS_SCCR_SATACM << SCCR_SATACM_SHIFT) | 180 #endif 181 0; 182 __be32 lcrr_mask = 183 #ifdef CONFIG_SYS_LCRR_DBYP /* PLL bypass */ 184 LCRR_DBYP | 185 #endif 186 #ifdef CONFIG_SYS_LCRR_EADC /* external address delay */ 187 LCRR_EADC | 188 #endif 189 #ifdef CONFIG_SYS_LCRR_CLKDIV /* system clock divider */ 190 LCRR_CLKDIV | 191 #endif 192 0; 193 __be32 lcrr_val = 194 #ifdef CONFIG_SYS_LCRR_DBYP /* PLL bypass */ 195 CONFIG_SYS_LCRR_DBYP | 196 #endif 197 #ifdef CONFIG_SYS_LCRR_EADC 198 CONFIG_SYS_LCRR_EADC | 199 #endif 200 #ifdef CONFIG_SYS_LCRR_CLKDIV /* system clock divider */ 201 CONFIG_SYS_LCRR_CLKDIV | 202 #endif 203 0; 204 205 /* Pointer is writable since we allocated a register for it */ 206 gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET); 207 208 /* global data region was cleared in start.S */ 209 210 /* system performance tweaking */ 211 clrsetbits_be32(&im->arbiter.acr, acr_mask, acr_val); 212 213 clrsetbits_be32(&im->sysconf.spcr, spcr_mask, spcr_val); 214 215 clrsetbits_be32(&im->clk.sccr, sccr_mask, sccr_val); 216 217 /* RSR - Reset Status Register - clear all status (4.6.1.3) */ 218 gd->arch.reset_status = __raw_readl(&im->reset.rsr); 219 __raw_writel(~(RSR_RES), &im->reset.rsr); 220 221 /* AER - Arbiter Event Register - store status */ 222 gd->arch.arbiter_event_attributes = __raw_readl(&im->arbiter.aeatr); 223 gd->arch.arbiter_event_address = __raw_readl(&im->arbiter.aeadr); 224 225 /* 226 * RMR - Reset Mode Register 227 * contains checkstop reset enable (4.6.1.4) 228 */ 229 __raw_writel(RMR_CSRE & (1<<RMR_CSRE_SHIFT), &im->reset.rmr); 230 231 /* LCRR - Clock Ratio Register (10.3.1.16) 232 * write, read, and isync per MPC8379ERM rev.1 CLKDEV field description 233 */ 234 clrsetbits_be32(&im->im_lbc.lcrr, lcrr_mask, lcrr_val); 235 __raw_readl(&im->im_lbc.lcrr); 236 isync(); 237 238 /* Enable Time Base & Decrementer ( so we will have udelay() )*/ 239 setbits_be32(&im->sysconf.spcr, SPCR_TBEN); 240 241 /* System General Purpose Register */ 242 #ifdef CONFIG_SYS_SICRH 243 #if defined(CONFIG_MPC834x) || defined(CONFIG_MPC8313) 244 /* regarding to MPC34x manual rev.1 bits 28..29 must be preserved */ 245 __raw_writel((im->sysconf.sicrh & 0x0000000C) | CONFIG_SYS_SICRH, 246 &im->sysconf.sicrh); 247 #else 248 __raw_writel(CONFIG_SYS_SICRH, &im->sysconf.sicrh); 249 #endif 250 #endif 251 #ifdef CONFIG_SYS_SICRL 252 __raw_writel(CONFIG_SYS_SICRL, &im->sysconf.sicrl); 253 #endif 254 #ifdef CONFIG_SYS_GPR1 255 __raw_writel(CONFIG_SYS_GPR1, &im->sysconf.gpr1); 256 #endif 257 #ifdef CONFIG_SYS_DDRCDR /* DDR control driver register */ 258 __raw_writel(CONFIG_SYS_DDRCDR, &im->sysconf.ddrcdr); 259 #endif 260 #ifdef CONFIG_SYS_OBIR /* Output buffer impedance register */ 261 __raw_writel(CONFIG_SYS_OBIR, &im->sysconf.obir); 262 #endif 263 264 #ifdef CONFIG_QE 265 /* Config QE ioports */ 266 config_qe_ioports(); 267 #endif 268 /* Set up preliminary BR/OR regs */ 269 init_early_memctl_regs(); 270 271 /* Local Access window setup */ 272 #if defined(CONFIG_SYS_LBLAWBAR0_PRELIM) && defined(CONFIG_SYS_LBLAWAR0_PRELIM) 273 im->sysconf.lblaw[0].bar = CONFIG_SYS_LBLAWBAR0_PRELIM; 274 im->sysconf.lblaw[0].ar = CONFIG_SYS_LBLAWAR0_PRELIM; 275 #else 276 #error CONFIG_SYS_LBLAWBAR0_PRELIM & CONFIG_SYS_LBLAWAR0_PRELIM must be defined 277 #endif 278 279 #if defined(CONFIG_SYS_LBLAWBAR1_PRELIM) && defined(CONFIG_SYS_LBLAWAR1_PRELIM) 280 im->sysconf.lblaw[1].bar = CONFIG_SYS_LBLAWBAR1_PRELIM; 281 im->sysconf.lblaw[1].ar = CONFIG_SYS_LBLAWAR1_PRELIM; 282 #endif 283 #if defined(CONFIG_SYS_LBLAWBAR2_PRELIM) && defined(CONFIG_SYS_LBLAWAR2_PRELIM) 284 im->sysconf.lblaw[2].bar = CONFIG_SYS_LBLAWBAR2_PRELIM; 285 im->sysconf.lblaw[2].ar = CONFIG_SYS_LBLAWAR2_PRELIM; 286 #endif 287 #if defined(CONFIG_SYS_LBLAWBAR3_PRELIM) && defined(CONFIG_SYS_LBLAWAR3_PRELIM) 288 im->sysconf.lblaw[3].bar = CONFIG_SYS_LBLAWBAR3_PRELIM; 289 im->sysconf.lblaw[3].ar = CONFIG_SYS_LBLAWAR3_PRELIM; 290 #endif 291 #if defined(CONFIG_SYS_LBLAWBAR4_PRELIM) && defined(CONFIG_SYS_LBLAWAR4_PRELIM) 292 im->sysconf.lblaw[4].bar = CONFIG_SYS_LBLAWBAR4_PRELIM; 293 im->sysconf.lblaw[4].ar = CONFIG_SYS_LBLAWAR4_PRELIM; 294 #endif 295 #if defined(CONFIG_SYS_LBLAWBAR5_PRELIM) && defined(CONFIG_SYS_LBLAWAR5_PRELIM) 296 im->sysconf.lblaw[5].bar = CONFIG_SYS_LBLAWBAR5_PRELIM; 297 im->sysconf.lblaw[5].ar = CONFIG_SYS_LBLAWAR5_PRELIM; 298 #endif 299 #if defined(CONFIG_SYS_LBLAWBAR6_PRELIM) && defined(CONFIG_SYS_LBLAWAR6_PRELIM) 300 im->sysconf.lblaw[6].bar = CONFIG_SYS_LBLAWBAR6_PRELIM; 301 im->sysconf.lblaw[6].ar = CONFIG_SYS_LBLAWAR6_PRELIM; 302 #endif 303 #if defined(CONFIG_SYS_LBLAWBAR7_PRELIM) && defined(CONFIG_SYS_LBLAWAR7_PRELIM) 304 im->sysconf.lblaw[7].bar = CONFIG_SYS_LBLAWBAR7_PRELIM; 305 im->sysconf.lblaw[7].ar = CONFIG_SYS_LBLAWAR7_PRELIM; 306 #endif 307 #ifdef CONFIG_SYS_GPIO1_PRELIM 308 im->gpio[0].dat = CONFIG_SYS_GPIO1_DAT; 309 im->gpio[0].dir = CONFIG_SYS_GPIO1_DIR; 310 #endif 311 #ifdef CONFIG_SYS_GPIO2_PRELIM 312 im->gpio[1].dat = CONFIG_SYS_GPIO2_DAT; 313 im->gpio[1].dir = CONFIG_SYS_GPIO2_DIR; 314 #endif 315 #if defined(CONFIG_USB_EHCI_FSL) && defined(CONFIG_MPC831x) 316 uint32_t temp; 317 struct usb_ehci *ehci = (struct usb_ehci *)CONFIG_SYS_FSL_USB1_ADDR; 318 319 /* Configure interface. */ 320 setbits_be32(&ehci->control, REFSEL_16MHZ | UTMI_PHY_EN); 321 322 /* Wait for clock to stabilize */ 323 do { 324 temp = __raw_readl(&ehci->control); 325 udelay(1000); 326 } while (!(temp & PHY_CLK_VALID)); 327 #endif 328 } 329 330 int cpu_init_r (void) 331 { 332 #ifdef CONFIG_QE 333 uint qe_base = CONFIG_SYS_IMMR + 0x00100000; /* QE immr base */ 334 335 qe_init(qe_base); 336 qe_reset(); 337 #endif 338 return 0; 339 } 340 341 /* 342 * Print out the bus arbiter event 343 */ 344 #if defined(CONFIG_DISPLAY_AER_FULL) 345 static int print_83xx_arb_event(int force) 346 { 347 static char* event[] = { 348 "Address Time Out", 349 "Data Time Out", 350 "Address Only Transfer Type", 351 "External Control Word Transfer Type", 352 "Reserved Transfer Type", 353 "Transfer Error", 354 "reserved", 355 "reserved" 356 }; 357 static char* master[] = { 358 "e300 Core Data Transaction", 359 "reserved", 360 "e300 Core Instruction Fetch", 361 "reserved", 362 "TSEC1", 363 "TSEC2", 364 "USB MPH", 365 "USB DR", 366 "Encryption Core", 367 "I2C Boot Sequencer", 368 "JTAG", 369 "reserved", 370 "eSDHC", 371 "PCI1", 372 "PCI2", 373 "DMA", 374 "QUICC Engine 00", 375 "QUICC Engine 01", 376 "QUICC Engine 10", 377 "QUICC Engine 11", 378 "reserved", 379 "reserved", 380 "reserved", 381 "reserved", 382 "SATA1", 383 "SATA2", 384 "SATA3", 385 "SATA4", 386 "reserved", 387 "PCI Express 1", 388 "PCI Express 2", 389 "TDM-DMAC" 390 }; 391 static char *transfer[] = { 392 "Address-only, Clean Block", 393 "Address-only, lwarx reservation set", 394 "Single-beat or Burst write", 395 "reserved", 396 "Address-only, Flush Block", 397 "reserved", 398 "Burst write", 399 "reserved", 400 "Address-only, sync", 401 "Address-only, tlbsync", 402 "Single-beat or Burst read", 403 "Single-beat or Burst read", 404 "Address-only, Kill Block", 405 "Address-only, icbi", 406 "Burst read", 407 "reserved", 408 "Address-only, eieio", 409 "reserved", 410 "Single-beat write", 411 "reserved", 412 "ecowx - Illegal single-beat write", 413 "reserved", 414 "reserved", 415 "reserved", 416 "Address-only, TLB Invalidate", 417 "reserved", 418 "Single-beat or Burst read", 419 "reserved", 420 "eciwx - Illegal single-beat read", 421 "reserved", 422 "Burst read", 423 "reserved" 424 }; 425 426 int etype = (gd->arch.arbiter_event_attributes & AEATR_EVENT) 427 >> AEATR_EVENT_SHIFT; 428 int mstr_id = (gd->arch.arbiter_event_attributes & AEATR_MSTR_ID) 429 >> AEATR_MSTR_ID_SHIFT; 430 int tbst = (gd->arch.arbiter_event_attributes & AEATR_TBST) 431 >> AEATR_TBST_SHIFT; 432 int tsize = (gd->arch.arbiter_event_attributes & AEATR_TSIZE) 433 >> AEATR_TSIZE_SHIFT; 434 int ttype = (gd->arch.arbiter_event_attributes & AEATR_TTYPE) 435 >> AEATR_TTYPE_SHIFT; 436 437 if (!force && !gd->arch.arbiter_event_address) 438 return 0; 439 440 puts("Arbiter Event Status:\n"); 441 printf(" Event Address: 0x%08lX\n", 442 gd->arch.arbiter_event_address); 443 printf(" Event Type: 0x%1x = %s\n", etype, event[etype]); 444 printf(" Master ID: 0x%02x = %s\n", mstr_id, master[mstr_id]); 445 printf(" Transfer Size: 0x%1x = %d bytes\n", (tbst<<3) | tsize, 446 tbst ? (tsize ? tsize : 8) : 16 + 8 * tsize); 447 printf(" Transfer Type: 0x%02x = %s\n", ttype, transfer[ttype]); 448 449 return gd->arch.arbiter_event_address; 450 } 451 452 #elif defined(CONFIG_DISPLAY_AER_BRIEF) 453 454 static int print_83xx_arb_event(int force) 455 { 456 if (!force && !gd->arch.arbiter_event_address) 457 return 0; 458 459 printf("Arbiter Event Status: AEATR=0x%08lX, AEADR=0x%08lX\n", 460 gd->arch.arbiter_event_attributes, 461 gd->arch.arbiter_event_address); 462 463 return gd->arch.arbiter_event_address; 464 } 465 #endif /* CONFIG_DISPLAY_AER_xxxx */ 466 467 /* 468 * Figure out the cause of the reset 469 */ 470 int prt_83xx_rsr(void) 471 { 472 static struct { 473 ulong mask; 474 char *desc; 475 } bits[] = { 476 { 477 RSR_SWSR, "Software Soft"}, { 478 RSR_SWHR, "Software Hard"}, { 479 RSR_JSRS, "JTAG Soft"}, { 480 RSR_CSHR, "Check Stop"}, { 481 RSR_SWRS, "Software Watchdog"}, { 482 RSR_BMRS, "Bus Monitor"}, { 483 RSR_SRS, "External/Internal Soft"}, { 484 RSR_HRS, "External/Internal Hard"} 485 }; 486 static int n = ARRAY_SIZE(bits); 487 ulong rsr = gd->arch.reset_status; 488 int i; 489 char *sep; 490 491 puts("Reset Status:"); 492 493 sep = " "; 494 for (i = 0; i < n; i++) 495 if (rsr & bits[i].mask) { 496 printf("%s%s", sep, bits[i].desc); 497 sep = ", "; 498 } 499 puts("\n"); 500 501 #if defined(CONFIG_DISPLAY_AER_FULL) || defined(CONFIG_DISPLAY_AER_BRIEF) 502 print_83xx_arb_event(rsr & RSR_BMRS); 503 #endif 504 puts("\n"); 505 506 return 0; 507 } 508