1// SPDX-License-Identifier: GPL-2.0+ 2/* 3 * Copyright (C) 2015 Altera Corporation 4 * 5 * This file is generated by sopc2dts. 6 */ 7 8/dts-v1/; 9 10/ { 11 model = "Altera NiosII Max10"; 12 compatible = "altr,niosii-max10"; 13 #address-cells = <1>; 14 #size-cells = <1>; 15 16 cpus { 17 #address-cells = <1>; 18 #size-cells = <0>; 19 20 cpu: cpu@0 { 21 u-boot,dm-pre-reloc; 22 device_type = "cpu"; 23 compatible = "altr,nios2-1.1"; 24 reg = <0x00000000>; 25 interrupt-controller; 26 #interrupt-cells = <1>; 27 altr,exception-addr = <0xc8000120>; 28 altr,fast-tlb-miss-addr = <0xc0000100>; 29 altr,has-div = <1>; 30 altr,has-initda = <1>; 31 altr,has-mmu = <1>; 32 altr,has-mul = <1>; 33 altr,implementation = "fast"; 34 altr,pid-num-bits = <8>; 35 altr,reset-addr = <0xd4000000>; 36 altr,tlb-num-entries = <256>; 37 altr,tlb-num-ways = <16>; 38 altr,tlb-ptr-sz = <8>; 39 clock-frequency = <75000000>; 40 dcache-line-size = <32>; 41 dcache-size = <32768>; 42 icache-line-size = <32>; 43 icache-size = <32768>; 44 }; 45 }; 46 47 memory { 48 device_type = "memory"; 49 reg = <0x08000000 0x08000000>, 50 <0x00000000 0x00000400>; 51 }; 52 53 sopc0: sopc@0 { 54 device_type = "soc"; 55 ranges; 56 #address-cells = <1>; 57 #size-cells = <1>; 58 compatible = "altr,avalon", "simple-bus"; 59 bus-frequency = <75000000>; 60 61 jtag_uart: serial@18001530 { 62 compatible = "altr,juart-1.0"; 63 reg = <0x18001530 0x00000008>; 64 interrupt-parent = <&cpu>; 65 interrupts = <7>; 66 }; 67 68 a_16550_uart_0: serial@18001600 { 69 compatible = "altr,16550-FIFO32", "ns16550a"; 70 reg = <0x18001600 0x00000200>; 71 interrupt-parent = <&cpu>; 72 interrupts = <1>; 73 auto-flow-control = <1>; 74 clock-frequency = <50000000>; 75 fifo-size = <32>; 76 reg-io-width = <4>; 77 reg-shift = <2>; 78 }; 79 80 ext_flash: quadspi@0x180014a0 { 81 compatible = "altr,quadspi-1.0"; 82 reg = <0x180014a0 0x00000020>, 83 <0x14000000 0x04000000>; 84 reg-names = "avl_csr", "avl_mem"; 85 interrupt-parent = <&cpu>; 86 interrupts = <4>; 87 #address-cells = <1>; 88 #size-cells = <0>; 89 flash0: nor0@0 { 90 compatible = "micron,n25q512a"; 91 #address-cells = <1>; 92 #size-cells = <1>; 93 }; 94 }; 95 96 sysid: sysid@18001528 { 97 compatible = "altr,sysid-1.0"; 98 reg = <0x18001528 0x00000008>; 99 }; 100 101 rgmii_0_eth_tse_0: ethernet@400 { 102 compatible = "altr,tse-msgdma-1.0", "altr,tse-1.0"; 103 reg = <0x00000400 0x00000400>, 104 <0x00000820 0x00000020>, 105 <0x00000800 0x00000020>, 106 <0x000008c0 0x00000008>, 107 <0x00000840 0x00000020>, 108 <0x00000860 0x00000020>; 109 reg-names = "control_port", "rx_csr", "rx_desc", "rx_resp", 110 "tx_csr", "tx_desc"; 111 interrupt-parent = <&cpu>; 112 interrupts = <2 3>; 113 interrupt-names = "rx_irq", "tx_irq"; 114 rx-fifo-depth = <8192>; 115 tx-fifo-depth = <8192>; 116 address-bits = <48>; 117 max-frame-size = <1518>; 118 local-mac-address = [00 00 00 00 00 00]; 119 altr,has-supplementary-unicast; 120 altr,enable-sup-addr = <1>; 121 altr,has-hash-multicast-filter; 122 altr,enable-hash = <1>; 123 phy-mode = "rgmii-id"; 124 phy-handle = <&phy0>; 125 rgmii_0_eth_tse_0_mdio: mdio { 126 compatible = "altr,tse-mdio"; 127 #address-cells = <1>; 128 #size-cells = <0>; 129 phy0: ethernet-phy@0 { 130 reg = <0>; 131 device_type = "ethernet-phy"; 132 }; 133 }; 134 }; 135 136 enet_pll: clock@0 { 137 compatible = "altr,pll-1.0"; 138 #clock-cells = <1>; 139 140 enet_pll_c0: enet_pll_c0 { 141 compatible = "fixed-clock"; 142 #clock-cells = <0>; 143 clock-frequency = <125000000>; 144 clock-output-names = "enet_pll-c0"; 145 }; 146 147 enet_pll_c1: enet_pll_c1 { 148 compatible = "fixed-clock"; 149 #clock-cells = <0>; 150 clock-frequency = <25000000>; 151 clock-output-names = "enet_pll-c1"; 152 }; 153 154 enet_pll_c2: enet_pll_c2 { 155 compatible = "fixed-clock"; 156 #clock-cells = <0>; 157 clock-frequency = <2500000>; 158 clock-output-names = "enet_pll-c2"; 159 }; 160 }; 161 162 sys_pll: clock@1 { 163 compatible = "altr,pll-1.0"; 164 #clock-cells = <1>; 165 166 sys_pll_c0: sys_pll_c0 { 167 compatible = "fixed-clock"; 168 #clock-cells = <0>; 169 clock-frequency = <100000000>; 170 clock-output-names = "sys_pll-c0"; 171 }; 172 173 sys_pll_c1: sys_pll_c1 { 174 compatible = "fixed-clock"; 175 #clock-cells = <0>; 176 clock-frequency = <50000000>; 177 clock-output-names = "sys_pll-c1"; 178 }; 179 180 sys_pll_c2: sys_pll_c2 { 181 compatible = "fixed-clock"; 182 #clock-cells = <0>; 183 clock-frequency = <75000000>; 184 clock-output-names = "sys_pll-c2"; 185 }; 186 }; 187 188 sys_clk_timer: timer@18001440 { 189 compatible = "altr,timer-1.0"; 190 reg = <0x18001440 0x00000020>; 191 interrupt-parent = <&cpu>; 192 interrupts = <0>; 193 clock-frequency = <75000000>; 194 }; 195 196 led_pio: gpio@180014d0 { 197 compatible = "altr,pio-1.0"; 198 reg = <0x180014d0 0x00000010>; 199 altr,gpio-bank-width = <4>; 200 resetvalue = <15>; 201 #gpio-cells = <2>; 202 gpio-controller; 203 gpio-bank-name = "led"; 204 }; 205 206 uart_0: serial@0x18001420 { 207 compatible = "altr,uart-1.0"; 208 reg = <0x18001420 0x00000020>; 209 interrupt-parent = <&cpu>; 210 interrupts = <1>; 211 clock-frequency = <75000000>; 212 current-speed = <115200>; 213 }; 214 215 button_pio: gpio@180014c0 { 216 compatible = "altr,pio-1.0"; 217 reg = <0x180014c0 0x00000010>; 218 interrupt-parent = <&cpu>; 219 interrupts = <6>; 220 altr,gpio-bank-width = <3>; 221 altr,interrupt-type = <2>; 222 edge_type = <1>; 223 level_trigger = <0>; 224 resetvalue = <0>; 225 #gpio-cells = <2>; 226 gpio-controller; 227 gpio-bank-name = "button"; 228 }; 229 230 sys_clk_timer_1: timer@880 { 231 compatible = "altr,timer-1.0"; 232 reg = <0x00000880 0x00000020>; 233 interrupt-parent = <&cpu>; 234 interrupts = <5>; 235 clock-frequency = <75000000>; 236 }; 237 238 fpga_leds: leds { 239 compatible = "gpio-leds"; 240 241 led_fpga0: fpga0 { 242 label = "fpga_led0"; 243 gpios = <&led_pio 0 1>; 244 }; 245 246 led_fpga1: fpga1 { 247 label = "fpga_led1"; 248 gpios = <&led_pio 1 1>; 249 }; 250 251 led_fpga2: fpga2 { 252 label = "fpga_led2"; 253 gpios = <&led_pio 2 1>; 254 }; 255 256 led_fpga3: fpga3 { 257 label = "fpga_led3"; 258 gpios = <&led_pio 3 1>; 259 }; 260 }; 261 }; 262 263 chosen { 264 bootargs = "debug console=ttyS0,115200"; 265 stdout-path = &a_16550_uart_0; 266 }; 267}; 268