xref: /openbmc/u-boot/arch/mips/mach-mt7620/cpu.c (revision cbd2fba1)
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * Copyright (C) 2018 Stefan Roese <sr@denx.de>
4  */
5 
6 #include <common.h>
7 #include <dm.h>
8 #include <ram.h>
9 #include <wdt.h>
10 #include <asm/io.h>
11 #include <linux/io.h>
12 #include <linux/sizes.h>
13 #include "mt76xx.h"
14 
15 #define STR_LEN			6
16 
17 #ifdef CONFIG_BOOT_ROM
18 int mach_cpu_init(void)
19 {
20 	ddr_calibrate();
21 
22 	return 0;
23 }
24 #endif
25 
26 int dram_init(void)
27 {
28 	gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE, SZ_256M);
29 
30 	return 0;
31 }
32 
33 int print_cpuinfo(void)
34 {
35 	static const char * const boot_str[] = { "PLL (3-Byte SPI Addr)",
36 						 "PLL (4-Byte SPI Addr)",
37 						 "XTAL (3-Byte SPI Addr)",
38 						 "XTAL (4-Byte SPI Addr)" };
39 	const void *blob = gd->fdt_blob;
40 	void __iomem *sysc_base;
41 	char buf[STR_LEN + 1];
42 	fdt_addr_t base;
43 	fdt_size_t size;
44 	char *str;
45 	int node;
46 	u32 val;
47 
48 	/* Get system controller base address */
49 	node = fdt_node_offset_by_compatible(blob, -1, "ralink,mt7620a-sysc");
50 	if (node < 0)
51 		return -FDT_ERR_NOTFOUND;
52 
53 	base = fdtdec_get_addr_size_auto_noparent(blob, node, "reg",
54 						  0, &size, true);
55 	if (base == FDT_ADDR_T_NONE)
56 		return -EINVAL;
57 
58 	sysc_base = ioremap_nocache(base, size);
59 
60 	str = (char *)sysc_base + MT76XX_CHIPID_OFFS;
61 	snprintf(buf, STR_LEN + 1, "%s", str);
62 	val = readl(sysc_base + MT76XX_CHIP_REV_ID_OFFS);
63 	printf("CPU:   %-*s Rev %ld.%ld - ", STR_LEN, buf,
64 	       (val & GENMASK(11, 8)) >> 8, val & GENMASK(3, 0));
65 
66 	val = (readl(sysc_base + MT76XX_SYSCFG0_OFFS) & GENMASK(3, 1)) >> 1;
67 	printf("Boot from %s\n", boot_str[val]);
68 
69 	return 0;
70 }
71 
72 #ifdef CONFIG_WATCHDOG
73 static struct udevice *watchdog_dev;
74 
75 /* Called by macro WATCHDOG_RESET */
76 void watchdog_reset(void)
77 {
78 	static ulong next_reset;
79 	ulong now;
80 
81 	if (!watchdog_dev)
82 		return;
83 
84 	now = get_timer(0);
85 
86 	/* Do not reset the watchdog too often */
87 	if (now > next_reset) {
88 		next_reset = now + 1000;	/* reset every 1000ms */
89 		wdt_reset(watchdog_dev);
90 	}
91 }
92 
93 int arch_misc_init(void)
94 {
95 	/* Init watchdog */
96 	if (uclass_get_device_by_seq(UCLASS_WDT, 0, &watchdog_dev)) {
97 		debug("Watchdog: Not found by seq!\n");
98 		if (uclass_get_device(UCLASS_WDT, 0, &watchdog_dev)) {
99 			puts("Watchdog: Not found!\n");
100 			return 0;
101 		}
102 	}
103 
104 	wdt_start(watchdog_dev, 60000, 0);	/* 60 seconds */
105 	printf("Watchdog: Started\n");
106 
107 	return 0;
108 }
109 #endif
110