1 /* 2 * This file is subject to the terms and conditions of the GNU General Public 3 * License. See the file "COPYING" in the main directory of this archive 4 * for more details. 5 * 6 * Copyright (C) 1994, 1995 Waldorf GmbH 7 * Copyright (C) 1994 - 2000 Ralf Baechle 8 * Copyright (C) 1999, 2000 Silicon Graphics, Inc. 9 * Copyright (C) 2000 FSMLabs, Inc. 10 */ 11 #ifndef _ASM_IO_H 12 #define _ASM_IO_H 13 14 #include <linux/config.h> 15 #if 0 16 #include <linux/pagemap.h> 17 #endif 18 #include <asm/addrspace.h> 19 #include <asm/byteorder.h> 20 21 /* 22 * Slowdown I/O port space accesses for antique hardware. 23 */ 24 #undef CONF_SLOWDOWN_IO 25 26 /* 27 * Sane hardware offers swapping of I/O space accesses in hardware; less 28 * sane hardware forces software to fiddle with this ... 29 */ 30 #if defined(CONFIG_SWAP_IO_SPACE) && defined(__MIPSEB__) 31 32 #define __ioswab8(x) (x) 33 #define __ioswab16(x) swab16(x) 34 #define __ioswab32(x) swab32(x) 35 36 #else 37 38 #define __ioswab8(x) (x) 39 #define __ioswab16(x) (x) 40 #define __ioswab32(x) (x) 41 42 #endif 43 44 /* 45 * This file contains the definitions for the MIPS counterpart of the 46 * x86 in/out instructions. This heap of macros and C results in much 47 * better code than the approach of doing it in plain C. The macros 48 * result in code that is to fast for certain hardware. On the other 49 * side the performance of the string functions should be improved for 50 * sake of certain devices like EIDE disks that do highspeed polled I/O. 51 * 52 * Ralf 53 * 54 * This file contains the definitions for the x86 IO instructions 55 * inb/inw/inl/outb/outw/outl and the "string versions" of the same 56 * (insb/insw/insl/outsb/outsw/outsl). You can also use "pausing" 57 * versions of the single-IO instructions (inb_p/inw_p/..). 58 * 59 * This file is not meant to be obfuscating: it's just complicated 60 * to (a) handle it all in a way that makes gcc able to optimize it 61 * as well as possible and (b) trying to avoid writing the same thing 62 * over and over again with slight variations and possibly making a 63 * mistake somewhere. 64 */ 65 66 /* 67 * On MIPS I/O ports are memory mapped, so we access them using normal 68 * load/store instructions. mips_io_port_base is the virtual address to 69 * which all ports are being mapped. For sake of efficiency some code 70 * assumes that this is an address that can be loaded with a single lui 71 * instruction, so the lower 16 bits must be zero. Should be true on 72 * on any sane architecture; generic code does not use this assumption. 73 */ 74 extern const unsigned long mips_io_port_base; 75 76 /* 77 * Gcc will generate code to load the value of mips_io_port_base after each 78 * function call which may be fairly wasteful in some cases. So we don't 79 * play quite by the book. We tell gcc mips_io_port_base is a long variable 80 * which solves the code generation issue. Now we need to violate the 81 * aliasing rules a little to make initialization possible and finally we 82 * will need the barrier() to fight side effects of the aliasing chat. 83 * This trickery will eventually collapse under gcc's optimizer. Oh well. 84 */ 85 static inline void set_io_port_base(unsigned long base) 86 { 87 * (unsigned long *) &mips_io_port_base = base; 88 } 89 90 /* 91 * Thanks to James van Artsdalen for a better timing-fix than 92 * the two short jumps: using outb's to a nonexistent port seems 93 * to guarantee better timings even on fast machines. 94 * 95 * On the other hand, I'd like to be sure of a non-existent port: 96 * I feel a bit unsafe about using 0x80 (should be safe, though) 97 * 98 * Linus 99 * 100 */ 101 102 #define __SLOW_DOWN_IO \ 103 __asm__ __volatile__( \ 104 "sb\t$0,0x80(%0)" \ 105 : : "r" (mips_io_port_base)); 106 107 #ifdef CONF_SLOWDOWN_IO 108 #ifdef REALLY_SLOW_IO 109 #define SLOW_DOWN_IO { __SLOW_DOWN_IO; __SLOW_DOWN_IO; __SLOW_DOWN_IO; __SLOW_DOWN_IO; } 110 #else 111 #define SLOW_DOWN_IO __SLOW_DOWN_IO 112 #endif 113 #else 114 #define SLOW_DOWN_IO 115 #endif 116 117 /* 118 * Change virtual addresses to physical addresses and vv. 119 * These are trivial on the 1:1 Linux/MIPS mapping 120 */ 121 extern inline phys_addr_t virt_to_phys(volatile void * address) 122 { 123 #ifndef CONFIG_64BIT 124 return CPHYSADDR(address); 125 #else 126 return XPHYSADDR(address); 127 #endif 128 } 129 130 extern inline void * phys_to_virt(unsigned long address) 131 { 132 #ifndef CONFIG_64BIT 133 return (void *)KSEG0ADDR(address); 134 #else 135 return (void *)CKSEG0ADDR(address); 136 #endif 137 } 138 139 /* 140 * IO bus memory addresses are also 1:1 with the physical address 141 */ 142 extern inline unsigned long virt_to_bus(volatile void * address) 143 { 144 #ifndef CONFIG_64BIT 145 return CPHYSADDR(address); 146 #else 147 return XPHYSADDR(address); 148 #endif 149 } 150 151 extern inline void * bus_to_virt(unsigned long address) 152 { 153 #ifndef CONFIG_64BIT 154 return (void *)KSEG0ADDR(address); 155 #else 156 return (void *)CKSEG0ADDR(address); 157 #endif 158 } 159 160 /* 161 * isa_slot_offset is the address where E(ISA) busaddress 0 is mapped 162 * for the processor. 163 */ 164 extern unsigned long isa_slot_offset; 165 166 extern void * __ioremap(unsigned long offset, unsigned long size, unsigned long flags); 167 168 #if 0 169 extern inline void *ioremap(unsigned long offset, unsigned long size) 170 { 171 return __ioremap(offset, size, _CACHE_UNCACHED); 172 } 173 174 extern inline void *ioremap_nocache(unsigned long offset, unsigned long size) 175 { 176 return __ioremap(offset, size, _CACHE_UNCACHED); 177 } 178 179 extern void iounmap(void *addr); 180 #endif 181 182 /* 183 * XXX We need system specific versions of these to handle EISA address bits 184 * 24-31 on SNI. 185 * XXX more SNI hacks. 186 */ 187 #define __raw_readb(addr) (*(volatile unsigned char *)(addr)) 188 #define __raw_readw(addr) (*(volatile unsigned short *)(addr)) 189 #define __raw_readl(addr) (*(volatile unsigned int *)(addr)) 190 #define readb(addr) __raw_readb((addr)) 191 #define readw(addr) __ioswab16(__raw_readw((addr))) 192 #define readl(addr) __ioswab32(__raw_readl((addr))) 193 194 #define __raw_writeb(b, addr) (*(volatile unsigned char *)(addr)) = (b) 195 #define __raw_writew(b, addr) (*(volatile unsigned short *)(addr)) = (b) 196 #define __raw_writel(b, addr) (*(volatile unsigned int *)(addr)) = (b) 197 #define writeb(b, addr) __raw_writeb((b), (addr)) 198 #define writew(b, addr) __raw_writew(__ioswab16(b), (addr)) 199 #define writel(b, addr) __raw_writel(__ioswab32(b), (addr)) 200 201 #define memset_io(a,b,c) memset((void *)(a),(b),(c)) 202 #define memcpy_fromio(a,b,c) memcpy((a),(void *)(b),(c)) 203 #define memcpy_toio(a,b,c) memcpy((void *)(a),(b),(c)) 204 205 /* END SNI HACKS ... */ 206 207 /* 208 * ISA space is 'always mapped' on currently supported MIPS systems, no need 209 * to explicitly ioremap() it. The fact that the ISA IO space is mapped 210 * to PAGE_OFFSET is pure coincidence - it does not mean ISA values 211 * are physical addresses. The following constant pointer can be 212 * used as the IO-area pointer (it can be iounmapped as well, so the 213 * analogy with PCI is quite large): 214 */ 215 #define __ISA_IO_base ((char *)(PAGE_OFFSET)) 216 217 #define isa_readb(a) readb(a) 218 #define isa_readw(a) readw(a) 219 #define isa_readl(a) readl(a) 220 #define isa_writeb(b,a) writeb(b,a) 221 #define isa_writew(w,a) writew(w,a) 222 #define isa_writel(l,a) writel(l,a) 223 224 #define isa_memset_io(a,b,c) memset_io((a),(b),(c)) 225 #define isa_memcpy_fromio(a,b,c) memcpy_fromio((a),(b),(c)) 226 #define isa_memcpy_toio(a,b,c) memcpy_toio((a),(b),(c)) 227 228 /* 229 * We don't have csum_partial_copy_fromio() yet, so we cheat here and 230 * just copy it. The net code will then do the checksum later. 231 */ 232 #define eth_io_copy_and_sum(skb,src,len,unused) memcpy_fromio((skb)->data,(src),(len)) 233 #define isa_eth_io_copy_and_sum(a,b,c,d) eth_copy_and_sum((a),(b),(c),(d)) 234 235 static inline int check_signature(unsigned long io_addr, 236 const unsigned char *signature, int length) 237 { 238 int retval = 0; 239 do { 240 if (readb(io_addr) != *signature) 241 goto out; 242 io_addr++; 243 signature++; 244 length--; 245 } while (length); 246 retval = 1; 247 out: 248 return retval; 249 } 250 #define isa_check_signature(io, s, l) check_signature(i,s,l) 251 252 /* 253 * Talk about misusing macros.. 254 */ 255 256 #define __OUT1(s) \ 257 static inline void __out##s(unsigned int value, unsigned int port) { 258 259 #define __OUT2(m) \ 260 __asm__ __volatile__ ("s" #m "\t%0,%1(%2)" 261 262 #define __OUT(m,s,w) \ 263 __OUT1(s) __OUT2(m) : : "r" (__ioswab##w(value)), "i" (0), "r" (mips_io_port_base+port)); } \ 264 __OUT1(s##c) __OUT2(m) : : "r" (__ioswab##w(value)), "ir" (port), "r" (mips_io_port_base)); } \ 265 __OUT1(s##_p) __OUT2(m) : : "r" (__ioswab##w(value)), "i" (0), "r" (mips_io_port_base+port)); \ 266 SLOW_DOWN_IO; } \ 267 __OUT1(s##c_p) __OUT2(m) : : "r" (__ioswab##w(value)), "ir" (port), "r" (mips_io_port_base)); \ 268 SLOW_DOWN_IO; } 269 270 #define __IN1(t,s) \ 271 static inline t __in##s(unsigned int port) { t _v; 272 273 /* 274 * Required nops will be inserted by the assembler 275 */ 276 #define __IN2(m) \ 277 __asm__ __volatile__ ("l" #m "\t%0,%1(%2)" 278 279 #define __IN(t,m,s,w) \ 280 __IN1(t,s) __IN2(m) : "=r" (_v) : "i" (0), "r" (mips_io_port_base+port)); return __ioswab##w(_v); } \ 281 __IN1(t,s##c) __IN2(m) : "=r" (_v) : "ir" (port), "r" (mips_io_port_base)); return __ioswab##w(_v); } \ 282 __IN1(t,s##_p) __IN2(m) : "=r" (_v) : "i" (0), "r" (mips_io_port_base+port)); SLOW_DOWN_IO; return __ioswab##w(_v); } \ 283 __IN1(t,s##c_p) __IN2(m) : "=r" (_v) : "ir" (port), "r" (mips_io_port_base)); SLOW_DOWN_IO; return __ioswab##w(_v); } 284 285 #define __INS1(s) \ 286 static inline void __ins##s(unsigned int port, void * addr, unsigned long count) { 287 288 #define __INS2(m) \ 289 if (count) \ 290 __asm__ __volatile__ ( \ 291 ".set\tnoreorder\n\t" \ 292 ".set\tnoat\n" \ 293 "1:\tl" #m "\t$1,%4(%5)\n\t" \ 294 "subu\t%1,1\n\t" \ 295 "s" #m "\t$1,(%0)\n\t" \ 296 "bne\t$0,%1,1b\n\t" \ 297 "addiu\t%0,%6\n\t" \ 298 ".set\tat\n\t" \ 299 ".set\treorder" 300 301 #define __INS(m,s,i) \ 302 __INS1(s) __INS2(m) \ 303 : "=r" (addr), "=r" (count) \ 304 : "0" (addr), "1" (count), "i" (0), \ 305 "r" (mips_io_port_base+port), "I" (i) \ 306 : "$1");} \ 307 __INS1(s##c) __INS2(m) \ 308 : "=r" (addr), "=r" (count) \ 309 : "0" (addr), "1" (count), "ir" (port), \ 310 "r" (mips_io_port_base), "I" (i) \ 311 : "$1");} 312 313 #define __OUTS1(s) \ 314 static inline void __outs##s(unsigned int port, const void * addr, unsigned long count) { 315 316 #define __OUTS2(m) \ 317 if (count) \ 318 __asm__ __volatile__ ( \ 319 ".set\tnoreorder\n\t" \ 320 ".set\tnoat\n" \ 321 "1:\tl" #m "\t$1,(%0)\n\t" \ 322 "subu\t%1,1\n\t" \ 323 "s" #m "\t$1,%4(%5)\n\t" \ 324 "bne\t$0,%1,1b\n\t" \ 325 "addiu\t%0,%6\n\t" \ 326 ".set\tat\n\t" \ 327 ".set\treorder" 328 329 #define __OUTS(m,s,i) \ 330 __OUTS1(s) __OUTS2(m) \ 331 : "=r" (addr), "=r" (count) \ 332 : "0" (addr), "1" (count), "i" (0), "r" (mips_io_port_base+port), "I" (i) \ 333 : "$1");} \ 334 __OUTS1(s##c) __OUTS2(m) \ 335 : "=r" (addr), "=r" (count) \ 336 : "0" (addr), "1" (count), "ir" (port), "r" (mips_io_port_base), "I" (i) \ 337 : "$1");} 338 339 __IN(unsigned char,b,b,8) 340 __IN(unsigned short,h,w,16) 341 __IN(unsigned int,w,l,32) 342 343 __OUT(b,b,8) 344 __OUT(h,w,16) 345 __OUT(w,l,32) 346 347 __INS(b,b,1) 348 __INS(h,w,2) 349 __INS(w,l,4) 350 351 __OUTS(b,b,1) 352 __OUTS(h,w,2) 353 __OUTS(w,l,4) 354 355 356 /* 357 * Note that due to the way __builtin_constant_p() works, you 358 * - can't use it inside an inline function (it will never be true) 359 * - you don't have to worry about side effects within the __builtin.. 360 */ 361 #define outb(val,port) \ 362 ((__builtin_constant_p((port)) && (port) < 32768) ? \ 363 __outbc((val),(port)) : \ 364 __outb((val),(port))) 365 366 #define inb(port) \ 367 ((__builtin_constant_p((port)) && (port) < 32768) ? \ 368 __inbc(port) : \ 369 __inb(port)) 370 371 #define outb_p(val,port) \ 372 ((__builtin_constant_p((port)) && (port) < 32768) ? \ 373 __outbc_p((val),(port)) : \ 374 __outb_p((val),(port))) 375 376 #define inb_p(port) \ 377 ((__builtin_constant_p((port)) && (port) < 32768) ? \ 378 __inbc_p(port) : \ 379 __inb_p(port)) 380 381 #define outw(val,port) \ 382 ((__builtin_constant_p((port)) && (port) < 32768) ? \ 383 __outwc((val),(port)) : \ 384 __outw((val),(port))) 385 386 #define inw(port) \ 387 ((__builtin_constant_p((port)) && (port) < 32768) ? \ 388 __inwc(port) : \ 389 __inw(port)) 390 391 #define outw_p(val,port) \ 392 ((__builtin_constant_p((port)) && (port) < 32768) ? \ 393 __outwc_p((val),(port)) : \ 394 __outw_p((val),(port))) 395 396 #define inw_p(port) \ 397 ((__builtin_constant_p((port)) && (port) < 32768) ? \ 398 __inwc_p(port) : \ 399 __inw_p(port)) 400 401 #define outl(val,port) \ 402 ((__builtin_constant_p((port)) && (port) < 32768) ? \ 403 __outlc((val),(port)) : \ 404 __outl((val),(port))) 405 406 #define inl(port) \ 407 ((__builtin_constant_p((port)) && (port) < 32768) ? \ 408 __inlc(port) : \ 409 __inl(port)) 410 411 #define outl_p(val,port) \ 412 ((__builtin_constant_p((port)) && (port) < 32768) ? \ 413 __outlc_p((val),(port)) : \ 414 __outl_p((val),(port))) 415 416 #define inl_p(port) \ 417 ((__builtin_constant_p((port)) && (port) < 32768) ? \ 418 __inlc_p(port) : \ 419 __inl_p(port)) 420 421 422 #define outsb(port,addr,count) \ 423 ((__builtin_constant_p((port)) && (port) < 32768) ? \ 424 __outsbc((port),(addr),(count)) : \ 425 __outsb ((port),(addr),(count))) 426 427 #define insb(port,addr,count) \ 428 ((__builtin_constant_p((port)) && (port) < 32768) ? \ 429 __insbc((port),(addr),(count)) : \ 430 __insb((port),(addr),(count))) 431 432 #define outsw(port,addr,count) \ 433 ((__builtin_constant_p((port)) && (port) < 32768) ? \ 434 __outswc((port),(addr),(count)) : \ 435 __outsw ((port),(addr),(count))) 436 437 #define insw(port,addr,count) \ 438 ((__builtin_constant_p((port)) && (port) < 32768) ? \ 439 __inswc((port),(addr),(count)) : \ 440 __insw((port),(addr),(count))) 441 442 #define outsl(port,addr,count) \ 443 ((__builtin_constant_p((port)) && (port) < 32768) ? \ 444 __outslc((port),(addr),(count)) : \ 445 __outsl ((port),(addr),(count))) 446 447 #define insl(port,addr,count) \ 448 ((__builtin_constant_p((port)) && (port) < 32768) ? \ 449 __inslc((port),(addr),(count)) : \ 450 __insl((port),(addr),(count))) 451 452 #define IO_SPACE_LIMIT 0xffff 453 454 /* 455 * The caches on some architectures aren't dma-coherent and have need to 456 * handle this in software. There are three types of operations that 457 * can be applied to dma buffers. 458 * 459 * - dma_cache_wback_inv(start, size) makes caches and coherent by 460 * writing the content of the caches back to memory, if necessary. 461 * The function also invalidates the affected part of the caches as 462 * necessary before DMA transfers from outside to memory. 463 * - dma_cache_wback(start, size) makes caches and coherent by 464 * writing the content of the caches back to memory, if necessary. 465 * The function also invalidates the affected part of the caches as 466 * necessary before DMA transfers from outside to memory. 467 * - dma_cache_inv(start, size) invalidates the affected parts of the 468 * caches. Dirty lines of the caches may be written back or simply 469 * be discarded. This operation is necessary before dma operations 470 * to the memory. 471 */ 472 extern void (*_dma_cache_wback_inv)(unsigned long start, unsigned long size); 473 extern void (*_dma_cache_wback)(unsigned long start, unsigned long size); 474 extern void (*_dma_cache_inv)(unsigned long start, unsigned long size); 475 476 #define dma_cache_wback_inv(start,size) _dma_cache_wback_inv(start,size) 477 #define dma_cache_wback(start,size) _dma_cache_wback(start,size) 478 #define dma_cache_inv(start,size) _dma_cache_inv(start,size) 479 480 static inline void sync(void) 481 { 482 } 483 484 /* 485 * Given a physical address and a length, return a virtual address 486 * that can be used to access the memory range with the caching 487 * properties specified by "flags". 488 */ 489 #define MAP_NOCACHE (0) 490 #define MAP_WRCOMBINE (0) 491 #define MAP_WRBACK (0) 492 #define MAP_WRTHROUGH (0) 493 494 static inline void * 495 map_physmem(phys_addr_t paddr, unsigned long len, unsigned long flags) 496 { 497 return (void *)paddr; 498 } 499 500 /* 501 * Take down a mapping set up by map_physmem(). 502 */ 503 static inline void unmap_physmem(void *vaddr, unsigned long flags) 504 { 505 506 } 507 508 #endif /* _ASM_IO_H */ 509