xref: /openbmc/u-boot/arch/mips/dts/luton_pcb090.dts (revision 5396b2a9) 
1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Copyright (c) 2018 Microsemi Corporation
4 */
5
6/dts-v1/;
7#include "mscc,luton.dtsi"
8
9/ {
10	model = "Luton26 PCB090 Reference Board";
11	compatible = "mscc,luton-pcb090", "mscc,luton";
12
13	aliases {
14		serial0 = &uart0;
15		spi0 = &spi0;
16	};
17
18	chosen {
19		stdout-path = "serial0:115200n8";
20	};
21
22	gpio-leds {
23		compatible = "gpio-leds";
24
25		status_green {
26			label = "pcb090:green:status";
27			gpios = <&sgpio 64 GPIO_ACTIVE_HIGH>; /* p0.2 */
28			default-state = "on";
29		};
30
31		status_red {
32			label = "pcb090:red:status";
33			gpios = <&sgpio 65 GPIO_ACTIVE_HIGH>; /* p1.2 */
34			default-state = "off";
35		};
36	};
37};
38
39&sgpio {
40	status = "okay";
41	gpio-ranges = <&sgpio 0 0 96>;
42};
43
44&uart0 {
45	status = "okay";
46};
47
48&spi0 {
49	status = "okay";
50	spi-flash@0 {
51		compatible = "spi-flash";
52		spi-max-frequency = <18000000>; /* input clock */
53		reg = <0>; /* CS0 */
54		spi-cs-high;
55	};
56};
57
58&mdio0 {
59	status = "okay";
60};
61
62&port0 {
63	phy-handle = <&phy0>;
64};
65
66&port1 {
67	phy-handle = <&phy1>;
68};
69
70&port2 {
71	phy-handle = <&phy2>;
72};
73
74&port3 {
75	phy-handle = <&phy3>;
76};
77
78&port4 {
79	phy-handle = <&phy4>;
80};
81
82&port5 {
83	phy-handle = <&phy5>;
84};
85
86&port6 {
87	phy-handle = <&phy6>;
88};
89
90&port7 {
91	phy-handle = <&phy7>;
92};
93
94&port8 {
95	phy-handle = <&phy8>;
96};
97
98&port9 {
99	phy-handle = <&phy9>;
100};
101
102&port10 {
103	phy-handle = <&phy10>;
104};
105
106&port11 {
107	phy-handle = <&phy11>;
108};
109