1/* 2 * Copyright (C) 2018 Ãlvaro Fernández Rojas <noltari@gmail.com> 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7#include <dt-bindings/clock/bcm6362-clock.h> 8#include <dt-bindings/gpio/gpio.h> 9#include <dt-bindings/power-domain/bcm6362-power-domain.h> 10#include <dt-bindings/reset/bcm6362-reset.h> 11#include "skeleton.dtsi" 12 13/ { 14 compatible = "brcm,bcm6362"; 15 16 aliases { 17 spi0 = &lsspi; 18 spi1 = &hsspi; 19 }; 20 21 cpus { 22 reg = <0x10000000 0x4>; 23 #address-cells = <1>; 24 #size-cells = <0>; 25 u-boot,dm-pre-reloc; 26 27 cpu@0 { 28 compatible = "brcm,bcm6362-cpu", "mips,mips4Kc"; 29 device_type = "cpu"; 30 reg = <0>; 31 u-boot,dm-pre-reloc; 32 }; 33 34 cpu@1 { 35 compatible = "brcm,bcm6362-cpu", "mips,mips4Kc"; 36 device_type = "cpu"; 37 reg = <1>; 38 u-boot,dm-pre-reloc; 39 }; 40 }; 41 42 clocks { 43 compatible = "simple-bus"; 44 #address-cells = <1>; 45 #size-cells = <1>; 46 u-boot,dm-pre-reloc; 47 48 hsspi_pll: hsspi-pll { 49 compatible = "fixed-clock"; 50 #clock-cells = <0>; 51 clock-frequency = <133333333>; 52 }; 53 54 periph_osc: periph-osc { 55 compatible = "fixed-clock"; 56 #clock-cells = <0>; 57 clock-frequency = <50000000>; 58 u-boot,dm-pre-reloc; 59 }; 60 61 periph_clk: periph-clk { 62 compatible = "brcm,bcm6345-clk"; 63 reg = <0x10000004 0x4>; 64 #clock-cells = <1>; 65 }; 66 }; 67 68 ubus { 69 compatible = "simple-bus"; 70 #address-cells = <1>; 71 #size-cells = <1>; 72 u-boot,dm-pre-reloc; 73 74 pll_cntl: syscon@10000008 { 75 compatible = "syscon"; 76 reg = <0x10000008 0x4>; 77 }; 78 79 syscon-reboot { 80 compatible = "syscon-reboot"; 81 regmap = <&pll_cntl>; 82 offset = <0x0>; 83 mask = <0x1>; 84 }; 85 86 periph_rst: reset-controller@10000010 { 87 compatible = "brcm,bcm6345-reset"; 88 reg = <0x10000010 0x4>; 89 #reset-cells = <1>; 90 }; 91 92 wdt: watchdog@1000005c { 93 compatible = "brcm,bcm6345-wdt"; 94 reg = <0x1000005c 0xc>; 95 clocks = <&periph_osc>; 96 }; 97 98 wdt-reboot { 99 compatible = "wdt-reboot"; 100 wdt = <&wdt>; 101 }; 102 103 gpio1: gpio-controller@10000080 { 104 compatible = "brcm,bcm6345-gpio"; 105 reg = <0x10000080 0x4>, <0x10000088 0x4>; 106 gpio-controller; 107 #gpio-cells = <2>; 108 ngpios = <16>; 109 110 status = "disabled"; 111 }; 112 113 gpio0: gpio-controller@10000084 { 114 compatible = "brcm,bcm6345-gpio"; 115 reg = <0x10000084 0x4>, <0x1000008c 0x4>; 116 gpio-controller; 117 #gpio-cells = <2>; 118 119 status = "disabled"; 120 }; 121 122 uart0: serial@10000100 { 123 compatible = "brcm,bcm6345-uart"; 124 reg = <0x10000100 0x18>; 125 clocks = <&periph_osc>; 126 127 status = "disabled"; 128 }; 129 130 uart1: serial@10000120 { 131 compatible = "brcm,bcm6345-uart"; 132 reg = <0x10000120 0x18>; 133 clocks = <&periph_osc>; 134 135 status = "disabled"; 136 }; 137 138 lsspi: spi@10000800 { 139 compatible = "brcm,bcm6358-spi"; 140 reg = <0x10000800 0x70c>; 141 #address-cells = <1>; 142 #size-cells = <0>; 143 clocks = <&periph_clk BCM6362_CLK_SPI>; 144 resets = <&periph_rst BCM6362_RST_SPI>; 145 spi-max-frequency = <20000000>; 146 num-cs = <8>; 147 148 status = "disabled"; 149 }; 150 151 hsspi: spi@10001000 { 152 compatible = "brcm,bcm6328-hsspi"; 153 #address-cells = <1>; 154 #size-cells = <0>; 155 reg = <0x10001000 0x600>; 156 clocks = <&periph_clk BCM6362_CLK_HSSPI>, <&hsspi_pll>; 157 clock-names = "hsspi", "pll"; 158 resets = <&periph_rst BCM6362_RST_SPI>; 159 spi-max-frequency = <50000000>; 160 num-cs = <8>; 161 162 status = "disabled"; 163 }; 164 165 leds: led-controller@10001900 { 166 compatible = "brcm,bcm6328-leds"; 167 reg = <0x10001900 0x24>; 168 #address-cells = <1>; 169 #size-cells = <0>; 170 171 status = "disabled"; 172 }; 173 174 periph_pwr: power-controller@10001848 { 175 compatible = "brcm,bcm6328-power-domain"; 176 reg = <0x10001848 0x4>; 177 #power-domain-cells = <1>; 178 }; 179 180 memory-controller@10003000 { 181 compatible = "brcm,bcm6328-mc"; 182 reg = <0x10003000 0x864>; 183 u-boot,dm-pre-reloc; 184 }; 185 }; 186}; 187