1/* 2 * Copyright (C) 2017 Álvaro Fernández Rojas <noltari@gmail.com> 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7#include <dt-bindings/clock/bcm6358-clock.h> 8#include <dt-bindings/gpio/gpio.h> 9#include <dt-bindings/reset/bcm6358-reset.h> 10#include "skeleton.dtsi" 11 12/ { 13 compatible = "brcm,bcm6358"; 14 15 aliases { 16 spi0 = &spi; 17 }; 18 19 cpus { 20 reg = <0xfffe0000 0x4>; 21 #address-cells = <1>; 22 #size-cells = <0>; 23 u-boot,dm-pre-reloc; 24 25 cpu@0 { 26 compatible = "brcm,bcm6358-cpu", "mips,mips4Kc"; 27 device_type = "cpu"; 28 reg = <0>; 29 u-boot,dm-pre-reloc; 30 }; 31 32 cpu@1 { 33 compatible = "brcm,bcm6358-cpu", "mips,mips4Kc"; 34 device_type = "cpu"; 35 reg = <1>; 36 u-boot,dm-pre-reloc; 37 }; 38 }; 39 40 clocks { 41 compatible = "simple-bus"; 42 #address-cells = <1>; 43 #size-cells = <1>; 44 u-boot,dm-pre-reloc; 45 46 periph_osc: periph-osc { 47 compatible = "fixed-clock"; 48 #clock-cells = <0>; 49 clock-frequency = <50000000>; 50 u-boot,dm-pre-reloc; 51 }; 52 53 periph_clk: periph-clk { 54 compatible = "brcm,bcm6345-clk"; 55 reg = <0xfffe0004 0x4>; 56 #clock-cells = <1>; 57 }; 58 }; 59 60 pflash: nor@1e000000 { 61 compatible = "cfi-flash"; 62 reg = <0x1e000000 0x2000000>; 63 bank-width = <2>; 64 #address-cells = <1>; 65 #size-cells = <1>; 66 67 status = "disabled"; 68 }; 69 70 ubus { 71 compatible = "simple-bus"; 72 #address-cells = <1>; 73 #size-cells = <1>; 74 u-boot,dm-pre-reloc; 75 76 pll_cntl: syscon@fffe0008 { 77 compatible = "syscon"; 78 reg = <0xfffe0008 0x4>; 79 }; 80 81 syscon-reboot { 82 compatible = "syscon-reboot"; 83 regmap = <&pll_cntl>; 84 offset = <0x0>; 85 mask = <0x1>; 86 }; 87 88 periph_rst: reset-controller@fffe0034 { 89 compatible = "brcm,bcm6345-reset"; 90 reg = <0xfffe0034 0x4>; 91 #reset-cells = <1>; 92 }; 93 94 wdt: watchdog@fffe005c { 95 compatible = "brcm,bcm6345-wdt"; 96 reg = <0xfffe005c 0xc>; 97 clocks = <&periph_osc>; 98 }; 99 100 wdt-reboot { 101 compatible = "wdt-reboot"; 102 wdt = <&wdt>; 103 }; 104 105 gpio1: gpio-controller@fffe0080 { 106 compatible = "brcm,bcm6345-gpio"; 107 reg = <0xfffe0080 0x4>, <0xfffe0088 0x4>; 108 gpio-controller; 109 #gpio-cells = <2>; 110 ngpios = <8>; 111 112 status = "disabled"; 113 }; 114 115 gpio0: gpio-controller@fffe0084 { 116 compatible = "brcm,bcm6345-gpio"; 117 reg = <0xfffe0084 0x4>, <0xfffe008c 0x4>; 118 gpio-controller; 119 #gpio-cells = <2>; 120 121 status = "disabled"; 122 }; 123 124 leds: led-controller@fffe00d0 { 125 compatible = "brcm,bcm6358-leds"; 126 reg = <0xfffe00d0 0x8>; 127 #address-cells = <1>; 128 #size-cells = <0>; 129 130 status = "disabled"; 131 }; 132 133 uart0: serial@fffe0100 { 134 compatible = "brcm,bcm6345-uart"; 135 reg = <0xfffe0100 0x18>; 136 clocks = <&periph_osc>; 137 138 status = "disabled"; 139 }; 140 141 uart1: serial@fffe0120 { 142 compatible = "brcm,bcm6345-uart"; 143 reg = <0xfffe0120 0x18>; 144 clocks = <&periph_osc>; 145 146 status = "disabled"; 147 }; 148 149 spi: spi@fffe0800 { 150 compatible = "brcm,bcm6358-spi"; 151 reg = <0xfffe0800 0x70c>; 152 #address-cells = <1>; 153 #size-cells = <0>; 154 clocks = <&periph_clk BCM6358_CLK_SPI>; 155 resets = <&periph_rst BCM6358_RST_SPI>; 156 spi-max-frequency = <20000000>; 157 num-cs = <4>; 158 159 status = "disabled"; 160 }; 161 162 memory-controller@fffe1200 { 163 compatible = "brcm,bcm6358-mc"; 164 reg = <0xfffe1200 0x4c>; 165 u-boot,dm-pre-reloc; 166 }; 167 168 ehci: usb-controller@fffe1300 { 169 compatible = "brcm,bcm6358-ehci", "generic-ehci"; 170 reg = <0xfffe1300 0x100>; 171 phys = <&usbh>; 172 big-endian; 173 174 status = "disabled"; 175 }; 176 177 ohci: usb-controller@fffe1400 { 178 compatible = "brcm,bcm6358-ohci", "generic-ohci"; 179 reg = <0xfffe1400 0x100>; 180 phys = <&usbh>; 181 big-endian; 182 183 status = "disabled"; 184 }; 185 186 usbh: usb-phy@fffe1500 { 187 compatible = "brcm,bcm6358-usbh"; 188 reg = <0xfffe1500 0x28>; 189 #phy-cells = <0>; 190 resets = <&periph_rst BCM6358_RST_USBH>; 191 192 status = "disabled"; 193 }; 194 }; 195}; 196