xref: /openbmc/u-boot/arch/mips/dts/brcm,bcm6328.dtsi (revision f77d4410)
1// SPDX-License-Identifier: GPL-2.0+
2/*
3 * Copyright (C) 2017 Álvaro Fernández Rojas <noltari@gmail.com>
4 */
5
6#include <dt-bindings/clock/bcm6328-clock.h>
7#include <dt-bindings/gpio/gpio.h>
8#include <dt-bindings/power-domain/bcm6328-power-domain.h>
9#include <dt-bindings/reset/bcm6328-reset.h>
10#include "skeleton.dtsi"
11
12/ {
13	compatible = "brcm,bcm6328";
14
15	aliases {
16		spi0 = &spi;
17	};
18
19	cpus {
20		reg = <0x10000000 0x4>;
21		#address-cells = <1>;
22		#size-cells = <0>;
23		u-boot,dm-pre-reloc;
24
25		cpu@0 {
26			compatible = "brcm,bcm6328-cpu", "mips,mips4Kc";
27			device_type = "cpu";
28			reg = <0>;
29			u-boot,dm-pre-reloc;
30		};
31
32		cpu@1 {
33			compatible = "brcm,bcm6328-cpu", "mips,mips4Kc";
34			device_type = "cpu";
35			reg = <1>;
36			u-boot,dm-pre-reloc;
37		};
38	};
39
40	clocks {
41		compatible = "simple-bus";
42		#address-cells = <1>;
43		#size-cells = <1>;
44		u-boot,dm-pre-reloc;
45
46		hsspi_pll: hsspi-pll {
47			compatible = "fixed-clock";
48			#clock-cells = <0>;
49			clock-frequency = <133333333>;
50		};
51
52		periph_osc: periph-osc {
53			compatible = "fixed-clock";
54			#clock-cells = <0>;
55			clock-frequency = <50000000>;
56			u-boot,dm-pre-reloc;
57		};
58
59		periph_clk: periph-clk {
60			compatible = "brcm,bcm6345-clk";
61			reg = <0x10000004 0x4>;
62			#clock-cells = <1>;
63		};
64	};
65
66	ubus {
67		compatible = "simple-bus";
68		#address-cells = <1>;
69		#size-cells = <1>;
70		u-boot,dm-pre-reloc;
71
72		periph_rst: reset-controller@10000010 {
73			compatible = "brcm,bcm6345-reset";
74			reg = <0x10000010 0x4>;
75			#reset-cells = <1>;
76		};
77
78		pll_cntl: syscon@10000068 {
79			compatible = "syscon";
80			reg = <0x10000068 0x4>;
81		};
82
83		syscon-reboot {
84			compatible = "syscon-reboot";
85			regmap = <&pll_cntl>;
86			offset = <0x0>;
87			mask = <0x1>;
88		};
89
90		wdt: watchdog@1000005c {
91			compatible = "brcm,bcm6345-wdt";
92			reg = <0x1000005c 0xc>;
93			clocks = <&periph_osc>;
94		};
95
96		wdt-reboot {
97			compatible = "wdt-reboot";
98			wdt = <&wdt>;
99		};
100
101		gpio: gpio-controller@10000084 {
102			compatible = "brcm,bcm6345-gpio";
103			reg = <0x10000084 0x4>, <0x1000008c 0x4>;
104			gpio-controller;
105			#gpio-cells = <2>;
106
107			status = "disabled";
108		};
109
110		uart0: serial@10000100 {
111			compatible = "brcm,bcm6345-uart";
112			reg = <0x10000100 0x18>;
113			clocks = <&periph_osc>;
114
115			status = "disabled";
116		};
117
118		uart1: serial@10000120 {
119			compatible = "brcm,bcm6345-uart";
120			reg = <0x10000120 0x18>;
121			clocks = <&periph_osc>;
122
123			status = "disabled";
124		};
125
126		leds: led-controller@10000800 {
127			compatible = "brcm,bcm6328-leds";
128			reg = <0x10000800 0x24>;
129			#address-cells = <1>;
130			#size-cells = <0>;
131
132			status = "disabled";
133		};
134
135		spi: spi@10001000 {
136			compatible = "brcm,bcm6328-hsspi";
137			#address-cells = <1>;
138			#size-cells = <0>;
139			reg = <0x10001000 0x600>;
140			clocks = <&periph_clk BCM6328_CLK_HSSPI>, <&hsspi_pll>;
141			clock-names = "hsspi", "pll";
142			resets = <&periph_rst BCM6328_RST_SPI>;
143			spi-max-frequency = <33333334>;
144			num-cs = <3>;
145
146			status = "disabled";
147		};
148
149		periph_pwr: power-controller@10001848 {
150			compatible = "brcm,bcm6328-power-domain";
151			reg = <0x10001848 0x4>;
152			#power-domain-cells = <1>;
153		};
154
155		ehci: usb-controller@10002500 {
156			compatible = "brcm,bcm6328-ehci", "generic-ehci";
157			reg = <0x10002500 0x100>;
158			phys = <&usbh>;
159			big-endian;
160
161			status = "disabled";
162		};
163
164		ohci: usb-controller@10002600 {
165			compatible = "brcm,bcm6328-ohci", "generic-ohci";
166			reg = <0x10002600 0x100>;
167			phys = <&usbh>;
168			big-endian;
169
170			status = "disabled";
171		};
172
173		usbh: usb-phy@10002700 {
174			compatible = "brcm,bcm6328-usbh";
175			reg = <0x10002700 0x38>;
176			#phy-cells = <0>;
177			clocks = <&periph_clk BCM6328_CLK_USBH>;
178			clock-names = "usbh";
179			power-domains = <&periph_pwr BCM6328_PWR_USBH>;
180			resets = <&periph_rst BCM6328_RST_USBH>;
181
182			status = "disabled";
183		};
184
185		memory-controller@10003000 {
186			compatible = "brcm,bcm6328-mc";
187			reg = <0x10003000 0x864>;
188			u-boot,dm-pre-reloc;
189		};
190	};
191};
192