1/* 2 * Copyright (C) 2017 Álvaro Fernández Rojas <noltari@gmail.com> 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7#include <dt-bindings/clock/bcm3380-clock.h> 8#include <dt-bindings/gpio/gpio.h> 9#include <dt-bindings/reset/bcm3380-reset.h> 10#include "skeleton.dtsi" 11 12/ { 13 compatible = "brcm,bcm3380"; 14 15 cpus { 16 reg = <0x14e00000 0x4>; 17 #address-cells = <1>; 18 #size-cells = <0>; 19 u-boot,dm-pre-reloc; 20 21 cpu@0 { 22 compatible = "brcm,bcm3380-cpu", "mips,mips4Kc"; 23 device_type = "cpu"; 24 reg = <0>; 25 u-boot,dm-pre-reloc; 26 }; 27 28 cpu@1 { 29 compatible = "brcm,bcm3380-cpu", "mips,mips4Kc"; 30 device_type = "cpu"; 31 reg = <1>; 32 u-boot,dm-pre-reloc; 33 }; 34 }; 35 36 clocks { 37 compatible = "simple-bus"; 38 #address-cells = <1>; 39 #size-cells = <1>; 40 u-boot,dm-pre-reloc; 41 42 periph_osc: periph-osc { 43 compatible = "fixed-clock"; 44 #clock-cells = <0>; 45 clock-frequency = <50000000>; 46 u-boot,dm-pre-reloc; 47 }; 48 49 periph_clk0: periph-clk@14e00004 { 50 compatible = "brcm,bcm6345-clk"; 51 reg = <0x14e00004 0x4>; 52 #clock-cells = <1>; 53 }; 54 55 periph_clk1: periph-clk@14e00008 { 56 compatible = "brcm,bcm6345-clk"; 57 reg = <0x14e00008 0x4>; 58 #clock-cells = <1>; 59 }; 60 }; 61 62 ubus { 63 compatible = "simple-bus"; 64 #address-cells = <1>; 65 #size-cells = <1>; 66 u-boot,dm-pre-reloc; 67 68 memory-controller@12000000 { 69 compatible = "brcm,bcm6328-mc"; 70 reg = <0x12000000 0x1000>; 71 u-boot,dm-pre-reloc; 72 }; 73 74 periph_rst0: reset-controller@14e0008c { 75 compatible = "brcm,bcm6345-reset"; 76 reg = <0x14e0008c 0x4>; 77 #reset-cells = <1>; 78 }; 79 80 periph_rst1: reset-controller@14e00090 { 81 compatible = "brcm,bcm6345-reset"; 82 reg = <0x14e00090 0x4>; 83 #reset-cells = <1>; 84 }; 85 86 pll_cntl: syscon@14e00094 { 87 compatible = "syscon"; 88 reg = <0x14e00094 0x4>; 89 }; 90 91 syscon-reboot { 92 compatible = "syscon-reboot"; 93 regmap = <&pll_cntl>; 94 offset = <0x0>; 95 mask = <0x1>; 96 }; 97 98 wdt: watchdog@14e000dc { 99 compatible = "brcm,bcm6345-wdt"; 100 reg = <0x14e000dc 0xc>; 101 102 clocks = <&periph_osc>; 103 }; 104 105 wdt-reboot { 106 compatible = "wdt-reboot"; 107 wdt = <&wdt>; 108 }; 109 110 gpio0: gpio-controller@14e00100 { 111 compatible = "brcm,bcm6345-gpio"; 112 reg = <0x14e00100 0x4>, <0x14e00108 0x4>; 113 gpio-controller; 114 #gpio-cells = <2>; 115 116 status = "disabled"; 117 }; 118 119 gpio1: gpio-controller@14e00104 { 120 compatible = "brcm,bcm6345-gpio"; 121 reg = <0x14e00104 0x4>, <0x14e0010c 0x4>; 122 gpio-controller; 123 #gpio-cells = <2>; 124 ngpios = <3>; 125 126 status = "disabled"; 127 }; 128 129 uart0: serial@14e00200 { 130 compatible = "brcm,bcm6345-uart"; 131 reg = <0x14e00200 0x18>; 132 clocks = <&periph_osc>; 133 134 status = "disabled"; 135 }; 136 137 uart1: serial@14e00220 { 138 compatible = "brcm,bcm6345-uart"; 139 reg = <0x14e00220 0x18>; 140 clocks = <&periph_osc>; 141 142 status = "disabled"; 143 }; 144 145 leds: led-controller@14e00f00 { 146 compatible = "brcm,bcm6328-leds"; 147 reg = <0x14e00f00 0x1c>; 148 #address-cells = <1>; 149 #size-cells = <0>; 150 151 status = "disabled"; 152 }; 153 }; 154}; 155