1// SPDX-License-Identifier: GPL-2.0+ 2/* 3 * Copyright (C) 2015-2016 Wills Wang <wills.wang@live.com> 4 */ 5 6#include "skeleton.dtsi" 7 8/ { 9 compatible = "qca,ar933x"; 10 11 #address-cells = <1>; 12 #size-cells = <1>; 13 14 cpus { 15 #address-cells = <1>; 16 #size-cells = <0>; 17 18 cpu@0 { 19 device_type = "cpu"; 20 compatible = "mips,mips24Kc"; 21 reg = <0>; 22 }; 23 }; 24 25 clocks { 26 #address-cells = <1>; 27 #size-cells = <1>; 28 ranges; 29 30 xtal: xtal { 31 #clock-cells = <0>; 32 compatible = "fixed-clock"; 33 clock-output-names = "xtal"; 34 }; 35 }; 36 37 pinctrl { 38 u-boot,dm-pre-reloc; 39 compatible = "qca,ar933x-pinctrl"; 40 ranges; 41 #address-cells = <1>; 42 #size-cells = <1>; 43 reg = <0x18040000 0x100>; 44 }; 45 46 ahb { 47 compatible = "simple-bus"; 48 ranges; 49 50 #address-cells = <1>; 51 #size-cells = <1>; 52 53 apb { 54 compatible = "simple-bus"; 55 ranges; 56 57 #address-cells = <1>; 58 #size-cells = <1>; 59 60 ehci0: ehci@1b000100 { 61 compatible = "generic-ehci"; 62 reg = <0x1b000100 0x100>; 63 64 status = "disabled"; 65 }; 66 67 uart0: uart@18020000 { 68 compatible = "qca,ar9330-uart"; 69 reg = <0x18020000 0x20>; 70 71 status = "disabled"; 72 }; 73 74 gmac0: eth@0x19000000 { 75 compatible = "qca,ag933x-mac"; 76 reg = <0x19000000 0x200>; 77 phy = <&phy0>; 78 phy-mode = "rmii"; 79 80 status = "disabled"; 81 82 mdio { 83 #address-cells = <1>; 84 #size-cells = <0>; 85 phy0: ethernet-phy@0 { 86 reg = <0>; 87 }; 88 }; 89 }; 90 91 gmac1: eth@0x1a000000 { 92 compatible = "qca,ag933x-mac"; 93 reg = <0x1a000000 0x200>; 94 phy = <&phy0>; 95 phy-mode = "rgmii"; 96 97 status = "disabled"; 98 }; 99 }; 100 101 spi0: spi@1f000000 { 102 compatible = "qca,ar7100-spi"; 103 reg = <0x1f000000 0x10>; 104 105 status = "disabled"; 106 107 #address-cells = <1>; 108 #size-cells = <0>; 109 }; 110 }; 111}; 112