1 /* 2 * mcf5249.h -- Definitions for Motorola Coldfire 5249 3 * 4 * Based on mcf5272sim.h of uCLinux distribution: 5 * (C) Copyright 1999, Greg Ungerer (gerg@snapgear.com) 6 * (C) Copyright 2000, Lineo Inc. (www.lineo.com) 7 * 8 * SPDX-License-Identifier: GPL-2.0+ 9 */ 10 11 #ifndef mcf5249_h 12 #define mcf5249_h 13 /****************************************************************************/ 14 15 /* 16 * useful definitions for reading/writing MBAR offset memory 17 */ 18 #define mbar_readLong(x) *((volatile unsigned long *) (CONFIG_SYS_MBAR + x)) 19 #define mbar_writeLong(x,y) *((volatile unsigned long *) (CONFIG_SYS_MBAR + x)) = y 20 #define mbar_writeShort(x,y) *((volatile unsigned short *) (CONFIG_SYS_MBAR + x)) = y 21 #define mbar_writeByte(x,y) *((volatile unsigned char *) (CONFIG_SYS_MBAR + x)) = y 22 #define mbar2_readLong(x) *((volatile unsigned long *) (CONFIG_SYS_MBAR2 + x)) 23 #define mbar2_writeLong(x,y) *((volatile unsigned long *) (CONFIG_SYS_MBAR2 + x)) = y 24 #define mbar2_writeShort(x,y) *((volatile unsigned short *) (CONFIG_SYS_MBAR2 + x)) = y 25 #define mbar2_writeByte(x,y) *((volatile unsigned char *) (CONFIG_SYS_MBAR2 + x)) = y 26 27 /* 28 * Size of internal RAM 29 */ 30 31 #define INT_RAM_SIZE 32768 /* RAMBAR0 - 32k */ 32 #define INT_RAM_SIZE2 65536 /* RAMBAR1 - 64k */ 33 34 /* 35 * Define the 5249 SIM register set addresses. 36 */ 37 38 /***************** 39 ***** MBAR1 ***** 40 *****************/ 41 #define MCFSIM_RSR 0x00 /* Reset Status reg (r/w) */ 42 #define MCFSIM_SYPCR 0x01 /* System Protection reg (r/w) */ 43 #define MCFSIM_SWIVR 0x02 /* SW Watchdog intr reg (r/w) */ 44 #define MCFSIM_SWSR 0x03 /* SW Watchdog service (r/w) */ 45 #define MCFSIM_MPARK 0x0c /* Bus master park register (r/w) */ 46 47 #define MCFSIM_SIMR 0x00 /* SIM Config reg (r/w) */ 48 #define MCFSIM_ICR0 0x4c /* Intr Ctrl reg 0 (r/w) */ 49 #define MCFSIM_ICR1 0x4d /* Intr Ctrl reg 1 (r/w) */ 50 #define MCFSIM_ICR2 0x4e /* Intr Ctrl reg 2 (r/w) */ 51 #define MCFSIM_ICR3 0x4f /* Intr Ctrl reg 3 (r/w) */ 52 #define MCFSIM_ICR4 0x50 /* Intr Ctrl reg 4 (r/w) */ 53 #define MCFSIM_ICR5 0x51 /* Intr Ctrl reg 5 (r/w) */ 54 #define MCFSIM_ICR6 0x52 /* Intr Ctrl reg 6 (r/w) */ 55 #define MCFSIM_ICR7 0x53 /* Intr Ctrl reg 7 (r/w) */ 56 #define MCFSIM_ICR8 0x54 /* Intr Ctrl reg 8 (r/w) */ 57 #define MCFSIM_ICR9 0x55 /* Intr Ctrl reg 9 (r/w) */ 58 #define MCFSIM_ICR10 0x56 /* Intr Ctrl reg 10 (r/w) */ 59 #define MCFSIM_ICR11 0x57 /* Intr Ctrl reg 11 (r/w) */ 60 61 #define MCFSIM_IPR 0x40 /* Interrupt Pend reg (r/w) */ 62 #define MCFSIM_IMR 0x44 /* Interrupt Mask reg (r/w) */ 63 64 #define MCFSIM_DCR 0x100 /* DRAM Control reg (r/w) */ 65 #define MCFSIM_DACR0 0x108 /* DRAM 0 Addr and Ctrl (r/w) */ 66 #define MCFSIM_DMR0 0x10c /* DRAM 0 Mask reg (r/w) */ 67 #define MCFSIM_DACR1 0x110 /* DRAM 1 Addr and Ctrl (r/w) */ 68 #define MCFSIM_DMR1 0x114 /* DRAM 1 Mask reg (r/w) */ 69 70 /***************** 71 ***** MBAR2 ***** 72 *****************/ 73 74 /* GPIO Addresses 75 * Note: These are offset from MBAR2! 76 */ 77 #define MCFSIM_GPIO_READ 0x00 /* Read-Only access to gpio 0-31 (MBAR2) (r) */ 78 #define MCFSIM_GPIO_OUT 0x04 /* Output register for gpio 0-31 (MBAR2) (r/w) */ 79 #define MCFSIM_GPIO_EN 0x08 /* gpio 0-31 enable (r/w) */ 80 #define MCFSIM_GPIO_FUNC 0x0c /* gpio 0-31 function select (r/w) */ 81 #define MCFSIM_GPIO1_READ 0xb0 /* Read-Only access to gpio 32-63 (MBAR2) (r) */ 82 #define MCFSIM_GPIO1_OUT 0xb4 /* Output register for gpio 32-63 (MBAR2) (r/w) */ 83 #define MCFSIM_GPIO1_EN 0xb8 /* gpio 32-63 enable (r/w) */ 84 #define MCFSIM_GPIO1_FUNC 0xbc /* gpio 32-63 function select (r/w) */ 85 86 #define MCFSIM_GPIO_INT_STAT 0xc0 /* Secondary Interrupt status (r) */ 87 #define MCFSIM_GPIO_INT_CLEAR 0xc0 /* Secondary Interrupt status (w) */ 88 #define MCFSIM_GPIO_INT_EN 0xc4 /* Secondary Interrupt status (r/w) */ 89 90 #define MCFSIM_INT_STAT3 0xe0 /* 3rd Interrupt ctrl status (r) */ 91 #define MCFSIM_INT_CLEAR3 0xe0 /* 3rd Interrupt ctrl clear (w) */ 92 #define MCFSIM_INT_EN3 0xe4 /* 3rd Interrupt ctrl enable (r/w) */ 93 94 #define MCFSIM_INTLEV1 0x140 /* Interrupts 0 - 7 (r/w) */ 95 #define MCFSIM_INTLEV2 0x144 /* Interrupts 8 -15 (r/w) */ 96 #define MCFSIM_INTLEV3 0x148 /* Interrupts 16-23 (r/w) */ 97 #define MCFSIM_INTLEV4 0x14c /* Interrupts 24-31 (r/w) */ 98 #define MCFSIM_INTLEV5 0x150 /* Interrupts 32-39 (r/w) */ 99 #define MCFSIM_INTLEV6 0x154 /* Interrupts 40-47 (r/w) */ 100 #define MCFSIM_INTLEV7 0x158 /* Interrupts 48-55 (r/w) */ 101 #define MCFSIM_INTLEV8 0x15c /* Interrupts 56-63 (r/w) */ 102 103 #define MCFSIM_SPURVEC 0x167 /* Spurious Vector Register (r/w) */ 104 #define MCFSIM_INTBASE 0x16b /* Software interrupt base address (r/w) */ 105 106 #define MCFSIM_IDECONFIG1 0x18c /* IDE config register 1 (r/w) */ 107 #define MCFSIM_IDECONFIG2 0x190 /* IDE config register 1 (r/w) */ 108 109 #define MCFSIM_PLLCR 0x180 /* PLL Control register */ 110 111 /* 112 * Some symbol defines for the above... 113 */ 114 #define MCFSIM_SWDICR MCFSIM_ICR0 /* Watchdog timer ICR */ 115 #define MCFSIM_TIMER1ICR MCFSIM_ICR1 /* Timer 1 ICR */ 116 #define MCFSIM_TIMER2ICR MCFSIM_ICR2 /* Timer 2 ICR */ 117 #define MCFSIM_I2CICR MCFSIM_ICR3 /* I2C ICR */ 118 #define MCFSIM_UART1ICR MCFSIM_ICR4 /* UART 1 ICR */ 119 #define MCFSIM_UART2ICR MCFSIM_ICR5 /* UART 2 ICR */ 120 /* XXX - If needed, DMA ICRs go here */ 121 #define MCFSIM_QSPIICR MCFSIM_ICR10 /* QSPI ICR */ 122 123 /* 124 * Bit definitions for the ICR family of registers. 125 */ 126 #define MCFSIM_ICR_AUTOVEC 0x80 /* Auto-vectored intr */ 127 #define MCFSIM_ICR_LEVEL0 0x00 /* Level 0 intr */ 128 #define MCFSIM_ICR_LEVEL1 0x04 /* Level 1 intr */ 129 #define MCFSIM_ICR_LEVEL2 0x08 /* Level 2 intr */ 130 #define MCFSIM_ICR_LEVEL3 0x0c /* Level 3 intr */ 131 #define MCFSIM_ICR_LEVEL4 0x10 /* Level 4 intr */ 132 #define MCFSIM_ICR_LEVEL5 0x14 /* Level 5 intr */ 133 #define MCFSIM_ICR_LEVEL6 0x18 /* Level 6 intr */ 134 #define MCFSIM_ICR_LEVEL7 0x1c /* Level 7 intr */ 135 136 #define MCFSIM_ICR_PRI0 0x00 /* Priority 0 intr */ 137 #define MCFSIM_ICR_PRI1 0x01 /* Priority 1 intr */ 138 #define MCFSIM_ICR_PRI2 0x02 /* Priority 2 intr */ 139 #define MCFSIM_ICR_PRI3 0x03 /* Priority 3 intr */ 140 141 /* 142 * Macros to read/set IMR register. It is 32 bits on the 5249. 143 */ 144 145 #define mcf_getimr() \ 146 *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) 147 148 #define mcf_setimr(imr) \ 149 *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) = (imr); 150 151 #endif /* mcf5249_h */ 152