xref: /openbmc/u-boot/arch/m68k/cpu/mcf547x_8x/pci.c (revision b994efbd)
1 /*
2  * Copyright (C) 2004-2007, 2012 Freescale Semiconductor, Inc.
3  * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
4  *
5  * SPDX-License-Identifier:	GPL-2.0+
6  */
7 
8 /*
9  * PCI Configuration space access support
10  */
11 #include <common.h>
12 #include <pci.h>
13 #include <asm/io.h>
14 #include <asm/immap.h>
15 
16 #if defined(CONFIG_PCI)
17 /* System RAM mapped over PCI */
18 #define CONFIG_SYS_PCI_SYS_MEM_BUS	CONFIG_SYS_SDRAM_BASE
19 #define CONFIG_SYS_PCI_SYS_MEM_PHYS	CONFIG_SYS_SDRAM_BASE
20 #define CONFIG_SYS_PCI_SYS_MEM_SIZE	(1024 * 1024 * 1024)
21 
22 #define cfg_read(val, addr, type, op)		*val = op((type)(addr));
23 #define cfg_write(val, addr, type, op)		op((type *)(addr), (val));
24 
25 #define PCI_OP(rw, size, type, op, mask)				\
26 int pci_##rw##_cfg_##size(struct pci_controller *hose,			\
27 	pci_dev_t dev, int offset, type val)				\
28 {									\
29 	u32 addr = 0;							\
30 	u16 cfg_type = 0;						\
31 	addr = ((offset & 0xfc) | cfg_type | (dev)  | 0x80000000);	\
32 	out_be32(hose->cfg_addr, addr);					\
33 	cfg_##rw(val, hose->cfg_data + (offset & mask), type, op);	\
34 	__asm__ __volatile__("nop");					\
35 	__asm__ __volatile__("nop");					\
36 	out_be32(hose->cfg_addr, addr & 0x7fffffff);			\
37 	return 0;							\
38 }
39 
40 PCI_OP(read, byte, u8 *, in_8, 3)
41 PCI_OP(read, word, u16 *, in_le16, 2)
42 PCI_OP(write, byte, u8, out_8, 3)
43 PCI_OP(write, word, u16, out_le16, 2)
44 PCI_OP(write, dword, u32, out_le32, 0)
45 
46 int pci_read_cfg_dword(struct pci_controller *hose, pci_dev_t dev,
47 		       int offset, u32 * val)
48 {
49 	u32 addr;
50 	u32 tmpv;
51 	u32 mask = 2;		/* word access */
52 	/* Read lower 16 bits */
53 	addr = ((offset & 0xfc) | (dev) | 0x80000000);
54 	out_be32(hose->cfg_addr, addr);
55 	*val = (u32) in_le16((u16 *) (hose->cfg_data + (offset & mask)));
56 	__asm__ __volatile__("nop");
57 	out_be32(hose->cfg_addr, addr & 0x7fffffff);
58 
59 	/* Read upper 16 bits */
60 	offset += 2;
61 	addr = ((offset & 0xfc) | 1 | (dev) | 0x80000000);
62 	out_be32(hose->cfg_addr, addr);
63 	tmpv = (u32) in_le16((u16 *) (hose->cfg_data + (offset & mask)));
64 	__asm__ __volatile__("nop");
65 	out_be32(hose->cfg_addr, addr & 0x7fffffff);
66 
67 	/* combine results into dword value */
68 	*val = (tmpv << 16) | *val;
69 
70 	return 0;
71 }
72 
73 void pci_mcf547x_8x_init(struct pci_controller *hose)
74 {
75 	pci_t *pci = (pci_t *) MMAP_PCI;
76 	gpio_t *gpio = (gpio_t *) MMAP_GPIO;
77 
78 	/* Port configuration */
79 	out_be16(&gpio->par_pcibg,
80 		GPIO_PAR_PCIBG_PCIBG0(3) | GPIO_PAR_PCIBG_PCIBG1(3) |
81 		GPIO_PAR_PCIBG_PCIBG2(3) | GPIO_PAR_PCIBG_PCIBG3(3) |
82 		GPIO_PAR_PCIBG_PCIBG4(3));
83 	out_be16(&gpio->par_pcibr,
84 		GPIO_PAR_PCIBR_PCIBR0(3) | GPIO_PAR_PCIBR_PCIBR1(3) |
85 		GPIO_PAR_PCIBR_PCIBR2(3) | GPIO_PAR_PCIBR_PCIBR3(3) |
86 		GPIO_PAR_PCIBR_PCIBR4(3));
87 
88 	/* Assert reset bit */
89 	setbits_be32(&pci->gscr, PCI_GSCR_PR);
90 
91 	out_be32(&pci->tcr1, PCI_TCR1_P);
92 
93 	/* Initiator windows */
94 	out_be32(&pci->iw0btar,
95 		CONFIG_SYS_PCI_MEM_PHYS | (CONFIG_SYS_PCI_MEM_PHYS >> 16));
96 	out_be32(&pci->iw1btar,
97 		CONFIG_SYS_PCI_IO_PHYS | (CONFIG_SYS_PCI_IO_PHYS >> 16));
98 	out_be32(&pci->iw2btar,
99 		CONFIG_SYS_PCI_CFG_PHYS | (CONFIG_SYS_PCI_CFG_PHYS >> 16));
100 
101 	out_be32(&pci->iwcr,
102 		PCI_IWCR_W0C_EN | PCI_IWCR_W1C_EN | PCI_IWCR_W1C_IO |
103 		PCI_IWCR_W2C_EN | PCI_IWCR_W2C_IO);
104 
105 	out_be32(&pci->icr, 0);
106 
107 	/* Enable bus master and mem access */
108 	out_be32(&pci->scr, PCI_SCR_B | PCI_SCR_M);
109 
110 	/* Cache line size and master latency */
111 	out_be32(&pci->cr1, PCI_CR1_CLS(8) | PCI_CR1_LTMR(0xf8));
112 	out_be32(&pci->cr2, 0);
113 
114 #ifdef CONFIG_SYS_PCI_BAR0
115 	out_be32(&pci->bar0, PCI_BAR_BAR0(CONFIG_SYS_PCI_BAR0));
116 	out_be32(&pci->tbatr0a, CONFIG_SYS_PCI_TBATR0 | PCI_TBATR_EN);
117 #endif
118 #ifdef CONFIG_SYS_PCI_BAR1
119 	out_be32(&pci->bar1, PCI_BAR_BAR1(CONFIG_SYS_PCI_BAR1));
120 	out_be32(&pci->tbatr1a, CONFIG_SYS_PCI_TBATR1 | PCI_TBATR_EN);
121 #endif
122 
123 	/* Deassert reset bit */
124 	clrbits_be32(&pci->gscr, PCI_GSCR_PR);
125 	udelay(1000);
126 
127 	/* Enable PCI bus master support */
128 	hose->first_busno = 0;
129 	hose->last_busno = 0xff;
130 
131 	pci_set_region(hose->regions + 0, CONFIG_SYS_PCI_MEM_BUS, CONFIG_SYS_PCI_MEM_PHYS,
132 		       CONFIG_SYS_PCI_MEM_SIZE, PCI_REGION_MEM);
133 
134 	pci_set_region(hose->regions + 1, CONFIG_SYS_PCI_IO_BUS, CONFIG_SYS_PCI_IO_PHYS,
135 		       CONFIG_SYS_PCI_IO_SIZE, PCI_REGION_IO);
136 
137 	pci_set_region(hose->regions + 2, CONFIG_SYS_PCI_SYS_MEM_BUS,
138 		       CONFIG_SYS_PCI_SYS_MEM_PHYS, CONFIG_SYS_PCI_SYS_MEM_SIZE,
139 		       PCI_REGION_MEM | PCI_REGION_SYS_MEMORY);
140 
141 	hose->region_count = 3;
142 
143 	hose->cfg_addr = &(pci->car);
144 	hose->cfg_data = (volatile unsigned char *)CONFIG_SYS_PCI_CFG_BUS;
145 
146 	pci_set_ops(hose, pci_read_cfg_byte, pci_read_cfg_word,
147 		    pci_read_cfg_dword, pci_write_cfg_byte, pci_write_cfg_word,
148 		    pci_write_cfg_dword);
149 
150 	/* Hose scan */
151 	pci_register_hose(hose);
152 	hose->last_busno = pci_hose_scan(hose);
153 }
154 #endif				/* CONFIG_PCI */
155