xref: /openbmc/u-boot/arch/m68k/cpu/mcf547x_8x/pci.c (revision 90c08fa0)
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * Copyright (C) 2004-2007, 2012 Freescale Semiconductor, Inc.
4  * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
5  */
6 
7 /*
8  * PCI Configuration space access support
9  */
10 #include <common.h>
11 #include <pci.h>
12 #include <asm/io.h>
13 #include <asm/immap.h>
14 
15 #if defined(CONFIG_PCI)
16 /* System RAM mapped over PCI */
17 #define CONFIG_SYS_PCI_SYS_MEM_BUS	CONFIG_SYS_SDRAM_BASE
18 #define CONFIG_SYS_PCI_SYS_MEM_PHYS	CONFIG_SYS_SDRAM_BASE
19 #define CONFIG_SYS_PCI_SYS_MEM_SIZE	(1024 * 1024 * 1024)
20 
21 #define cfg_read(val, addr, type, op)		*val = op((type)(addr));
22 #define cfg_write(val, addr, type, op)		op((type *)(addr), (val));
23 
24 #define PCI_OP(rw, size, type, op, mask)				\
25 int pci_##rw##_cfg_##size(struct pci_controller *hose,			\
26 	pci_dev_t dev, int offset, type val)				\
27 {									\
28 	u32 addr = 0;							\
29 	u16 cfg_type = 0;						\
30 	addr = ((offset & 0xfc) | cfg_type | (dev)  | 0x80000000);	\
31 	out_be32(hose->cfg_addr, addr);					\
32 	cfg_##rw(val, hose->cfg_data + (offset & mask), type, op);	\
33 	__asm__ __volatile__("nop");					\
34 	__asm__ __volatile__("nop");					\
35 	out_be32(hose->cfg_addr, addr & 0x7fffffff);			\
36 	return 0;							\
37 }
38 
39 PCI_OP(read, byte, u8 *, in_8, 3)
40 PCI_OP(read, word, u16 *, in_le16, 2)
41 PCI_OP(write, byte, u8, out_8, 3)
42 PCI_OP(write, word, u16, out_le16, 2)
43 PCI_OP(write, dword, u32, out_le32, 0)
44 
45 int pci_read_cfg_dword(struct pci_controller *hose, pci_dev_t dev,
46 		       int offset, u32 * val)
47 {
48 	u32 addr;
49 	u32 tmpv;
50 	u32 mask = 2;		/* word access */
51 	/* Read lower 16 bits */
52 	addr = ((offset & 0xfc) | (dev) | 0x80000000);
53 	out_be32(hose->cfg_addr, addr);
54 	*val = (u32) in_le16((u16 *) (hose->cfg_data + (offset & mask)));
55 	__asm__ __volatile__("nop");
56 	out_be32(hose->cfg_addr, addr & 0x7fffffff);
57 
58 	/* Read upper 16 bits */
59 	offset += 2;
60 	addr = ((offset & 0xfc) | 1 | (dev) | 0x80000000);
61 	out_be32(hose->cfg_addr, addr);
62 	tmpv = (u32) in_le16((u16 *) (hose->cfg_data + (offset & mask)));
63 	__asm__ __volatile__("nop");
64 	out_be32(hose->cfg_addr, addr & 0x7fffffff);
65 
66 	/* combine results into dword value */
67 	*val = (tmpv << 16) | *val;
68 
69 	return 0;
70 }
71 
72 void pci_mcf547x_8x_init(struct pci_controller *hose)
73 {
74 	pci_t *pci = (pci_t *) MMAP_PCI;
75 	gpio_t *gpio = (gpio_t *) MMAP_GPIO;
76 
77 	/* Port configuration */
78 	out_be16(&gpio->par_pcibg,
79 		GPIO_PAR_PCIBG_PCIBG0(3) | GPIO_PAR_PCIBG_PCIBG1(3) |
80 		GPIO_PAR_PCIBG_PCIBG2(3) | GPIO_PAR_PCIBG_PCIBG3(3) |
81 		GPIO_PAR_PCIBG_PCIBG4(3));
82 	out_be16(&gpio->par_pcibr,
83 		GPIO_PAR_PCIBR_PCIBR0(3) | GPIO_PAR_PCIBR_PCIBR1(3) |
84 		GPIO_PAR_PCIBR_PCIBR2(3) | GPIO_PAR_PCIBR_PCIBR3(3) |
85 		GPIO_PAR_PCIBR_PCIBR4(3));
86 
87 	/* Assert reset bit */
88 	setbits_be32(&pci->gscr, PCI_GSCR_PR);
89 
90 	out_be32(&pci->tcr1, PCI_TCR1_P);
91 
92 	/* Initiator windows */
93 	out_be32(&pci->iw0btar,
94 		CONFIG_SYS_PCI_MEM_PHYS | (CONFIG_SYS_PCI_MEM_PHYS >> 16));
95 	out_be32(&pci->iw1btar,
96 		CONFIG_SYS_PCI_IO_PHYS | (CONFIG_SYS_PCI_IO_PHYS >> 16));
97 	out_be32(&pci->iw2btar,
98 		CONFIG_SYS_PCI_CFG_PHYS | (CONFIG_SYS_PCI_CFG_PHYS >> 16));
99 
100 	out_be32(&pci->iwcr,
101 		PCI_IWCR_W0C_EN | PCI_IWCR_W1C_EN | PCI_IWCR_W1C_IO |
102 		PCI_IWCR_W2C_EN | PCI_IWCR_W2C_IO);
103 
104 	out_be32(&pci->icr, 0);
105 
106 	/* Enable bus master and mem access */
107 	out_be32(&pci->scr, PCI_SCR_B | PCI_SCR_M);
108 
109 	/* Cache line size and master latency */
110 	out_be32(&pci->cr1, PCI_CR1_CLS(8) | PCI_CR1_LTMR(0xf8));
111 	out_be32(&pci->cr2, 0);
112 
113 #ifdef CONFIG_SYS_PCI_BAR0
114 	out_be32(&pci->bar0, PCI_BAR_BAR0(CONFIG_SYS_PCI_BAR0));
115 	out_be32(&pci->tbatr0a, CONFIG_SYS_PCI_TBATR0 | PCI_TBATR_EN);
116 #endif
117 #ifdef CONFIG_SYS_PCI_BAR1
118 	out_be32(&pci->bar1, PCI_BAR_BAR1(CONFIG_SYS_PCI_BAR1));
119 	out_be32(&pci->tbatr1a, CONFIG_SYS_PCI_TBATR1 | PCI_TBATR_EN);
120 #endif
121 
122 	/* Deassert reset bit */
123 	clrbits_be32(&pci->gscr, PCI_GSCR_PR);
124 	udelay(1000);
125 
126 	/* Enable PCI bus master support */
127 	hose->first_busno = 0;
128 	hose->last_busno = 0xff;
129 
130 	pci_set_region(hose->regions + 0, CONFIG_SYS_PCI_MEM_BUS, CONFIG_SYS_PCI_MEM_PHYS,
131 		       CONFIG_SYS_PCI_MEM_SIZE, PCI_REGION_MEM);
132 
133 	pci_set_region(hose->regions + 1, CONFIG_SYS_PCI_IO_BUS, CONFIG_SYS_PCI_IO_PHYS,
134 		       CONFIG_SYS_PCI_IO_SIZE, PCI_REGION_IO);
135 
136 	pci_set_region(hose->regions + 2, CONFIG_SYS_PCI_SYS_MEM_BUS,
137 		       CONFIG_SYS_PCI_SYS_MEM_PHYS, CONFIG_SYS_PCI_SYS_MEM_SIZE,
138 		       PCI_REGION_MEM | PCI_REGION_SYS_MEMORY);
139 
140 	hose->region_count = 3;
141 
142 	hose->cfg_addr = &(pci->car);
143 	hose->cfg_data = (volatile unsigned char *)CONFIG_SYS_PCI_CFG_BUS;
144 
145 	pci_set_ops(hose, pci_read_cfg_byte, pci_read_cfg_word,
146 		    pci_read_cfg_dword, pci_write_cfg_byte, pci_write_cfg_word,
147 		    pci_write_cfg_dword);
148 
149 	/* Hose scan */
150 	pci_register_hose(hose);
151 	hose->last_busno = pci_hose_scan(hose);
152 }
153 #endif				/* CONFIG_PCI */
154