xref: /openbmc/u-boot/arch/m68k/cpu/mcf5445x/pci.c (revision ee52b188)
1 /*
2  * Copyright (C) 2004-2007, 2012 Freescale Semiconductor, Inc.
3  * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
4  *
5  * See file CREDITS for list of people who contributed to this
6  * project.
7  *
8  * This program is free software; you can redistribute it and/or
9  * modify it under the terms of the GNU General Public License as
10  * published by the Free Software Foundation; either version 2 of
11  * the License, or (at your option) any later version.
12  *
13  * This program is distributed in the hope that it will be useful,
14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
16  * GNU General Public License for more details.
17  *
18  * You should have received a copy of the GNU General Public License
19  * along with this program; if not, write to the Free Software
20  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21  * MA 02111-1307 USA
22  */
23 
24 /*
25  * PCI Configuration space access support
26  */
27 #include <common.h>
28 #include <pci.h>
29 #include <asm/io.h>
30 #include <asm/immap.h>
31 
32 #if defined(CONFIG_PCI)
33 /* System RAM mapped over PCI */
34 #define CONFIG_SYS_PCI_SYS_MEM_BUS	CONFIG_SYS_SDRAM_BASE
35 #define CONFIG_SYS_PCI_SYS_MEM_PHYS	CONFIG_SYS_SDRAM_BASE
36 #define CONFIG_SYS_PCI_SYS_MEM_SIZE	(1024 * 1024 * 1024)
37 
38 #define cfg_read(val, addr, type, op)		*val = op((type)(addr));
39 #define cfg_write(val, addr, type, op)		op((type *)(addr), (val));
40 
41 #define PCI_OP(rw, size, type, op, mask)				\
42 int pci_##rw##_cfg_##size(struct pci_controller *hose,			\
43 	pci_dev_t dev, int offset, type val)				\
44 {									\
45 	u32 addr = 0;							\
46 	u16 cfg_type = 0;						\
47 	addr = ((offset & 0xfc) | cfg_type | (dev)  | 0x80000000);	\
48 	out_be32(hose->cfg_addr, addr);					\
49 	cfg_##rw(val, hose->cfg_data + (offset & mask), type, op);	\
50 	out_be32(hose->cfg_addr, addr & 0x7fffffff);			\
51 	return 0;							\
52 }
53 
54 PCI_OP(read, byte, u8 *, in_8, 3)
55 PCI_OP(read, word, u16 *, in_le16, 2)
56 PCI_OP(read, dword, u32 *, in_le32, 0)
57 PCI_OP(write, byte, u8, out_8, 3)
58 PCI_OP(write, word, u16, out_le16, 2)
59 PCI_OP(write, dword, u32, out_le32, 0)
60 
61 void pci_mcf5445x_init(struct pci_controller *hose)
62 {
63 	pci_t *pci = (pci_t *)MMAP_PCI;
64 	pciarb_t *pciarb = (pciarb_t *)MMAP_PCIARB;
65 	gpio_t *gpio = (gpio_t *) MMAP_GPIO;
66 	u32 barEn = 0;
67 
68 	out_be32(&pciarb->acr, 0x001f001f);
69 
70 	/* Set PCIGNT1, PCIREQ1, PCIREQ0/PCIGNTIN, PCIGNT0/PCIREQOUT,
71 	   PCIREQ2, PCIGNT2 */
72 	out_be16(&gpio->par_pci,
73 		GPIO_PAR_PCI_GNT3_GNT3 | GPIO_PAR_PCI_GNT2 |
74 		GPIO_PAR_PCI_GNT1 | GPIO_PAR_PCI_GNT0 |
75 		GPIO_PAR_PCI_REQ3_REQ3 | GPIO_PAR_PCI_REQ2 |
76 		GPIO_PAR_PCI_REQ1 | GPIO_PAR_PCI_REQ0);
77 
78 	/* Assert reset bit */
79 	setbits_be32(&pci->gscr, PCI_GSCR_PR);
80 
81 	setbits_be32(&pci->tcr1, PCI_TCR1_P);
82 
83 	/* Initiator windows */
84 	out_be32(&pci->iw0btar,
85 		CONFIG_SYS_PCI_MEM_PHYS | (CONFIG_SYS_PCI_MEM_PHYS >> 16));
86 	out_be32(&pci->iw1btar,
87 		CONFIG_SYS_PCI_IO_PHYS | (CONFIG_SYS_PCI_IO_PHYS >> 16));
88 	out_be32(&pci->iw2btar,
89 		CONFIG_SYS_PCI_CFG_PHYS | (CONFIG_SYS_PCI_CFG_PHYS >> 16));
90 
91 	out_be32(&pci->iwcr,
92 		PCI_IWCR_W0C_EN | PCI_IWCR_W1C_EN | PCI_IWCR_W1C_IO |
93 		PCI_IWCR_W2C_EN | PCI_IWCR_W2C_IO);
94 
95 	out_be32(&pci->icr, 0);
96 
97 	/* Enable bus master and mem access */
98 	out_be32(&pci->scr, PCI_SCR_B | PCI_SCR_M);
99 
100 	/* Cache line size and master latency */
101 	out_be32(&pci->cr1, PCI_CR1_CLS(8) | PCI_CR1_LTMR(0xF8));
102 	out_be32(&pci->cr2, 0);
103 
104 #ifdef CONFIG_SYS_PCI_BAR0
105 	out_be32(&pci->bar0, PCI_BAR_BAR0(CONFIG_SYS_PCI_BAR0));
106 	out_be32(&pci->tbatr0, CONFIG_SYS_PCI_TBATR0 | PCI_TBATR_EN);
107 	barEn |= PCI_TCR2_B0E;
108 #endif
109 #ifdef CONFIG_SYS_PCI_BAR1
110 	out_be32(&pci->bar1, PCI_BAR_BAR1(CONFIG_SYS_PCI_BAR1));
111 	out_be32(&pci->tbatr1, CONFIG_SYS_PCI_TBATR1 | PCI_TBATR_EN);
112 	barEn |= PCI_TCR2_B1E;
113 #endif
114 #ifdef CONFIG_SYS_PCI_BAR2
115 	out_be32(&pci->bar2, PCI_BAR_BAR2(CONFIG_SYS_PCI_BAR2));
116 	out_be32(&pci->tbatr2, CONFIG_SYS_PCI_TBATR2 | PCI_TBATR_EN);
117 	barEn |= PCI_TCR2_B2E;
118 #endif
119 #ifdef CONFIG_SYS_PCI_BAR3
120 	out_be32(&pci->bar3, PCI_BAR_BAR3(CONFIG_SYS_PCI_BAR3));
121 	out_be32(&pci->tbatr3, CONFIG_SYS_PCI_TBATR3 | PCI_TBATR_EN);
122 	barEn |= PCI_TCR2_B3E;
123 #endif
124 #ifdef CONFIG_SYS_PCI_BAR4
125 	out_be32(&pci->bar4, PCI_BAR_BAR4(CONFIG_SYS_PCI_BAR4));
126 	out_be32(&pci->tbatr4, CONFIG_SYS_PCI_TBATR4 | PCI_TBATR_EN);
127 	barEn |= PCI_TCR2_B4E;
128 #endif
129 #ifdef CONFIG_SYS_PCI_BAR5
130 	out_be32(&pci->bar5, PCI_BAR_BAR5(CONFIG_SYS_PCI_BAR5));
131 	out_be32(&pci->tbatr5, CONFIG_SYS_PCI_TBATR5 | PCI_TBATR_EN);
132 	barEn |= PCI_TCR2_B5E;
133 #endif
134 
135 	out_be32(&pci->tcr2, barEn);
136 
137 	/* Deassert reset bit */
138 	clrbits_be32(&pci->gscr, PCI_GSCR_PR);
139 	udelay(1000);
140 
141 	/* Enable PCI bus master support */
142 	hose->first_busno = 0;
143 	hose->last_busno = 0xff;
144 
145 	pci_set_region(hose->regions + 0, CONFIG_SYS_PCI_MEM_BUS, CONFIG_SYS_PCI_MEM_PHYS,
146 		       CONFIG_SYS_PCI_MEM_SIZE, PCI_REGION_MEM);
147 
148 	pci_set_region(hose->regions + 1, CONFIG_SYS_PCI_IO_BUS, CONFIG_SYS_PCI_IO_PHYS,
149 		       CONFIG_SYS_PCI_IO_SIZE, PCI_REGION_IO);
150 
151 	pci_set_region(hose->regions + 2, CONFIG_SYS_PCI_SYS_MEM_BUS,
152 		       CONFIG_SYS_PCI_SYS_MEM_PHYS, CONFIG_SYS_PCI_SYS_MEM_SIZE,
153 		       PCI_REGION_MEM | PCI_REGION_SYS_MEMORY);
154 
155 	hose->region_count = 3;
156 
157 	hose->cfg_addr = &(pci->car);
158 	hose->cfg_data = (volatile unsigned char *)CONFIG_SYS_PCI_CFG_BUS;
159 
160 	pci_set_ops(hose, pci_read_cfg_byte, pci_read_cfg_word,
161 		    pci_read_cfg_dword, pci_write_cfg_byte, pci_write_cfg_word,
162 		    pci_write_cfg_dword);
163 
164 	/* Hose scan */
165 	pci_register_hose(hose);
166 	hose->last_busno = pci_hose_scan(hose);
167 }
168 #endif				/* CONFIG_PCI */
169