xref: /openbmc/u-boot/arch/m68k/cpu/mcf5445x/cpu_init.c (revision 0b304a24)
1 /*
2  *
3  * (C) Copyright 2000-2003
4  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
5  *
6  * (C) Copyright 2004-2007, 2012 Freescale Semiconductor, Inc.
7  * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
8  *
9  * SPDX-License-Identifier:	GPL-2.0+
10  */
11 
12 #include <common.h>
13 #include <watchdog.h>
14 #include <asm/immap.h>
15 #include <asm/processor.h>
16 #include <asm/rtc.h>
17 #include <asm/io.h>
18 #include <linux/compiler.h>
19 
20 #if defined(CONFIG_CMD_NET)
21 #include <config.h>
22 #include <net.h>
23 #include <asm/fec.h>
24 #endif
25 
26 void init_fbcs(void)
27 {
28 	fbcs_t *fbcs __maybe_unused = (fbcs_t *) MMAP_FBCS;
29 
30 #if !defined(CONFIG_SERIAL_BOOT)
31 #if (defined(CONFIG_SYS_CS0_BASE) && defined(CONFIG_SYS_CS0_MASK) && defined(CONFIG_SYS_CS0_CTRL))
32 	out_be32(&fbcs->csar0, CONFIG_SYS_CS0_BASE);
33 	out_be32(&fbcs->cscr0, CONFIG_SYS_CS0_CTRL);
34 	out_be32(&fbcs->csmr0, CONFIG_SYS_CS0_MASK);
35 #endif
36 #endif
37 
38 #if (defined(CONFIG_SYS_CS1_BASE) && defined(CONFIG_SYS_CS1_MASK) && defined(CONFIG_SYS_CS1_CTRL))
39 	/* Latch chipselect */
40 	out_be32(&fbcs->csar1, CONFIG_SYS_CS1_BASE);
41 	out_be32(&fbcs->cscr1, CONFIG_SYS_CS1_CTRL);
42 	out_be32(&fbcs->csmr1, CONFIG_SYS_CS1_MASK);
43 #endif
44 
45 #if (defined(CONFIG_SYS_CS2_BASE) && defined(CONFIG_SYS_CS2_MASK) && defined(CONFIG_SYS_CS2_CTRL))
46 	out_be32(&fbcs->csar2, CONFIG_SYS_CS2_BASE);
47 	out_be32(&fbcs->cscr2, CONFIG_SYS_CS2_CTRL);
48 	out_be32(&fbcs->csmr2, CONFIG_SYS_CS2_MASK);
49 #endif
50 
51 #if (defined(CONFIG_SYS_CS3_BASE) && defined(CONFIG_SYS_CS3_MASK) && defined(CONFIG_SYS_CS3_CTRL))
52 	out_be32(&fbcs->csar3, CONFIG_SYS_CS3_BASE);
53 	out_be32(&fbcs->cscr3, CONFIG_SYS_CS3_CTRL);
54 	out_be32(&fbcs->csmr3, CONFIG_SYS_CS3_MASK);
55 #endif
56 
57 #if (defined(CONFIG_SYS_CS4_BASE) && defined(CONFIG_SYS_CS4_MASK) && defined(CONFIG_SYS_CS4_CTRL))
58 	out_be32(&fbcs->csar4, CONFIG_SYS_CS4_BASE);
59 	out_be32(&fbcs->cscr4, CONFIG_SYS_CS4_CTRL);
60 	out_be32(&fbcs->csmr4, CONFIG_SYS_CS4_MASK);
61 #endif
62 
63 #if (defined(CONFIG_SYS_CS5_BASE) && defined(CONFIG_SYS_CS5_MASK) && defined(CONFIG_SYS_CS5_CTRL))
64 	out_be32(&fbcs->csar5, CONFIG_SYS_CS5_BASE);
65 	out_be32(&fbcs->cscr5, CONFIG_SYS_CS5_CTRL);
66 	out_be32(&fbcs->csmr5, CONFIG_SYS_CS5_MASK);
67 #endif
68 }
69 
70 /*
71  * Breath some life into the CPU...
72  *
73  * Set up the memory map,
74  * initialize a bunch of registers,
75  * initialize the UPM's
76  */
77 void cpu_init_f(void)
78 {
79 	gpio_t *gpio = (gpio_t *) MMAP_GPIO;
80 
81 #ifdef CONFIG_MCF5441x
82 	scm_t *scm = (scm_t *) MMAP_SCM;
83 	pm_t *pm = (pm_t *) MMAP_PM;
84 
85 	/* Disable Switch */
86 	*(unsigned long *)(MMAP_L2_SW0 + 0x00000024) = 0;
87 
88 	/* Disable core watchdog */
89 	out_be16(&scm->cwcr, 0);
90 	out_8(&gpio->par_fbctl,
91 		GPIO_PAR_FBCTL_ALE_FB_ALE | GPIO_PAR_FBCTL_OE_FB_OE |
92 		GPIO_PAR_FBCTL_FBCLK | GPIO_PAR_FBCTL_RW |
93 		GPIO_PAR_FBCTL_TA_TA);
94 	out_8(&gpio->par_be,
95 		GPIO_PAR_BE_BE3_BE3 | GPIO_PAR_BE_BE2_BE2 |
96 		GPIO_PAR_BE_BE1_BE1 | GPIO_PAR_BE_BE0_BE0);
97 
98 	/* eDMA */
99 	out_8(&pm->pmcr0, 17);
100 
101 	/* INTR0 - INTR2 */
102 	out_8(&pm->pmcr0, 18);
103 	out_8(&pm->pmcr0, 19);
104 	out_8(&pm->pmcr0, 20);
105 
106 	/* I2C */
107 	out_8(&pm->pmcr0, 22);
108 	out_8(&pm->pmcr1, 4);
109 	out_8(&pm->pmcr1, 7);
110 
111 	/* DTMR0 - DTMR3*/
112 	out_8(&pm->pmcr0, 28);
113 	out_8(&pm->pmcr0, 29);
114 	out_8(&pm->pmcr0, 30);
115 	out_8(&pm->pmcr0, 31);
116 
117 	/* PIT0 - PIT3 */
118 	out_8(&pm->pmcr0, 32);
119 	out_8(&pm->pmcr0, 33);
120 	out_8(&pm->pmcr0, 34);
121 	out_8(&pm->pmcr0, 35);
122 
123 	/* Edge Port */
124 	out_8(&pm->pmcr0, 36);
125 	out_8(&pm->pmcr0, 37);
126 
127 	/* USB OTG */
128 	out_8(&pm->pmcr0, 44);
129 	/* USB Host */
130 	out_8(&pm->pmcr0, 45);
131 
132 	/* ESDHC */
133 	out_8(&pm->pmcr0, 51);
134 
135 	/* ENET0 - ENET1 */
136 	out_8(&pm->pmcr0, 53);
137 	out_8(&pm->pmcr0, 54);
138 
139 	/* NAND */
140 	out_8(&pm->pmcr0, 63);
141 
142 #ifdef CONFIG_SYS_I2C_0
143 	out_8(&gpio->par_cani2c, 0xF0);
144 	/* I2C0 pull up */
145 	out_be16(&gpio->pcr_b, 0x003C);
146 	/* I2C0 max speed */
147 	out_8(&gpio->srcr_cani2c, 0x03);
148 #endif
149 #ifdef CONFIG_SYS_I2C_2
150 	/* I2C2 */
151 	out_8(&gpio->par_ssi0h, 0xA0);
152 	/* I2C2, UART7 */
153 	out_8(&gpio->par_ssi0h, 0xA8);
154 	/* UART7 */
155 	out_8(&gpio->par_ssi0l, 0x2);
156 	/* UART8, UART9 */
157 	out_8(&gpio->par_cani2c, 0xAA);
158 	/* UART4, UART0 */
159 	out_8(&gpio->par_uart0, 0xAF);
160 	/* UART5, UART1 */
161 	out_8(&gpio->par_uart1, 0xAF);
162 	/* UART6, UART2 */
163 	out_8(&gpio->par_uart2, 0xAF);
164 	/* I2C2 pull up */
165 	out_be16(&gpio->pcr_h, 0xF000);
166 #endif
167 #ifdef CONFIG_SYS_I2C_5
168 	/* I2C5 */
169 	out_8(&gpio->par_uart1, 0x0A);
170 	/* I2C5 pull up */
171 	out_be16(&gpio->pcr_e, 0x0003);
172 	out_be16(&gpio->pcr_f, 0xC000);
173 #endif
174 
175 	/* Lowest slew rate for UART0,1,2 */
176 	out_8(&gpio->srcr_uart, 0x00);
177 #endif		/* CONFIG_MCF5441x */
178 
179 #ifdef CONFIG_MCF5445x
180 	scm1_t *scm1 = (scm1_t *) MMAP_SCM1;
181 
182 	out_be32(&scm1->mpr, 0x77777777);
183 	out_be32(&scm1->pacra, 0);
184 	out_be32(&scm1->pacrb, 0);
185 	out_be32(&scm1->pacrc, 0);
186 	out_be32(&scm1->pacrd, 0);
187 	out_be32(&scm1->pacre, 0);
188 	out_be32(&scm1->pacrf, 0);
189 	out_be32(&scm1->pacrg, 0);
190 
191 	/* FlexBus */
192 	out_8(&gpio->par_be,
193 		GPIO_PAR_BE_BE3_BE3 | GPIO_PAR_BE_BE2_BE2 |
194 		GPIO_PAR_BE_BE1_BE1 | GPIO_PAR_BE_BE0_BE0);
195 	out_8(&gpio->par_fbctl,
196 		GPIO_PAR_FBCTL_OE | GPIO_PAR_FBCTL_TA_TA |
197 		GPIO_PAR_FBCTL_RW_RW | GPIO_PAR_FBCTL_TS_TS);
198 
199 #ifdef CONFIG_SYS_FSL_I2C
200 	out_be16(&gpio->par_feci2c,
201 		GPIO_PAR_FECI2C_SCL_SCL | GPIO_PAR_FECI2C_SDA_SDA);
202 #endif
203 #endif		/* CONFIG_MCF5445x */
204 
205 	/* FlexBus Chipselect */
206 	init_fbcs();
207 
208 	/*
209 	 * now the flash base address is no longer at 0 (Newer ColdFire family
210 	 * boot at address 0 instead of 0xFFnn_nnnn). The vector table must
211 	 * also move to the new location.
212 	 */
213 	if (CONFIG_SYS_CS0_BASE != 0)
214 		setvbr(CONFIG_SYS_CS0_BASE);
215 
216 	icache_enable();
217 }
218 
219 /*
220  * initialize higher level parts of CPU like timers
221  */
222 int cpu_init_r(void)
223 {
224 #ifdef CONFIG_MCFRTC
225 	rtc_t *rtc = (rtc_t *)(CONFIG_SYS_MCFRTC_BASE);
226 	rtcex_t *rtcex = (rtcex_t *)&rtc->extended;
227 
228 	out_be32(&rtcex->gocu, (CONFIG_SYS_RTC_OSCILLATOR >> 16) & 0xffff);
229 	out_be32(&rtcex->gocl, CONFIG_SYS_RTC_OSCILLATOR & 0xffff);
230 #endif
231 
232 	return (0);
233 }
234 
235 void uart_port_conf(int port)
236 {
237 	gpio_t *gpio = (gpio_t *) MMAP_GPIO;
238 #ifdef CONFIG_MCF5441x
239 	pm_t *pm = (pm_t *) MMAP_PM;
240 #endif
241 
242 	/* Setup Ports: */
243 	switch (port) {
244 #ifdef CONFIG_MCF5441x
245 	case 0:
246 		/* UART0 */
247 		out_8(&pm->pmcr0, 24);
248 		clrbits_8(&gpio->par_uart0,
249 			~(GPIO_PAR_UART0_U0RXD_MASK | GPIO_PAR_UART0_U0TXD_MASK));
250 		setbits_8(&gpio->par_uart0,
251 			GPIO_PAR_UART0_U0RXD_U0RXD | GPIO_PAR_UART0_U0TXD_U0TXD);
252 		break;
253 	case 1:
254 		/* UART1 */
255 		out_8(&pm->pmcr0, 25);
256 		clrbits_8(&gpio->par_uart1,
257 			~(GPIO_PAR_UART1_U1RXD_MASK | GPIO_PAR_UART1_U1TXD_MASK));
258 		setbits_8(&gpio->par_uart1,
259 			GPIO_PAR_UART1_U1RXD_U1RXD | GPIO_PAR_UART1_U1TXD_U1TXD);
260 		break;
261 	case 2:
262 		/* UART2 */
263 		out_8(&pm->pmcr0, 26);
264 		clrbits_8(&gpio->par_uart2,
265 			~(GPIO_PAR_UART2_U2RXD_MASK | GPIO_PAR_UART2_U2TXD_MASK));
266 		setbits_8(&gpio->par_uart2,
267 			GPIO_PAR_UART2_U2RXD_U2RXD | GPIO_PAR_UART2_U2TXD_U2TXD);
268 		break;
269 	case 3:
270 		/* UART3 */
271 		out_8(&pm->pmcr0, 27);
272 		clrbits_8(&gpio->par_dspi0,
273 			~(GPIO_PAR_DSPI0_SIN_MASK | GPIO_PAR_DSPI0_SOUT_MASK));
274 		setbits_8(&gpio->par_dspi0,
275 			GPIO_PAR_DSPI0_SIN_U3RXD | GPIO_PAR_DSPI0_SOUT_U3TXD);
276 		break;
277 	case 4:
278 		/* UART4 */
279 		out_8(&pm->pmcr1, 24);
280 		clrbits_8(&gpio->par_uart0,
281 			~(GPIO_PAR_UART0_U0CTS_MASK | GPIO_PAR_UART0_U0RTS_MASK));
282 		setbits_8(&gpio->par_uart0,
283 			GPIO_PAR_UART0_U0CTS_U4TXD | GPIO_PAR_UART0_U0RTS_U4RXD);
284 		break;
285 	case 5:
286 		/* UART5 */
287 		out_8(&pm->pmcr1, 25);
288 		clrbits_8(&gpio->par_uart1,
289 			~(GPIO_PAR_UART1_U1CTS_MASK | GPIO_PAR_UART1_U1RTS_MASK));
290 		setbits_8(&gpio->par_uart1,
291 			GPIO_PAR_UART1_U1CTS_U5TXD | GPIO_PAR_UART1_U1RTS_U5RXD);
292 		break;
293 	case 6:
294 		/* UART6 */
295 		out_8(&pm->pmcr1, 26);
296 		clrbits_8(&gpio->par_uart2,
297 			~(GPIO_PAR_UART2_U2CTS_MASK | GPIO_PAR_UART2_U2RTS_MASK));
298 		setbits_8(&gpio->par_uart2,
299 			GPIO_PAR_UART2_U2CTS_U6TXD | GPIO_PAR_UART2_U2RTS_U6RXD);
300 		break;
301 	case 7:
302 		/* UART7 */
303 		out_8(&pm->pmcr1, 27);
304 		clrbits_8(&gpio->par_ssi0h, ~GPIO_PAR_SSI0H_RXD_MASK);
305 		clrbits_8(&gpio->par_ssi0l, ~GPIO_PAR_SSI0L_BCLK_MASK);
306 		setbits_8(&gpio->par_ssi0h, GPIO_PAR_SSI0H_FS_U7TXD);
307 		setbits_8(&gpio->par_ssi0l, GPIO_PAR_SSI0L_BCLK_U7RXD);
308 		break;
309 	case 8:
310 		/* UART8 */
311 		out_8(&pm->pmcr0, 28);
312 		clrbits_8(&gpio->par_cani2c,
313 			~(GPIO_PAR_CANI2C_I2C0SCL_MASK | GPIO_PAR_CANI2C_I2C0SDA_MASK));
314 		setbits_8(&gpio->par_cani2c,
315 			GPIO_PAR_CANI2C_I2C0SCL_U8TXD | GPIO_PAR_CANI2C_I2C0SDA_U8RXD);
316 		break;
317 	case 9:
318 		/* UART9 */
319 		out_8(&pm->pmcr1, 29);
320 		clrbits_8(&gpio->par_cani2c,
321 			~(GPIO_PAR_CANI2C_CAN1TX_MASK | GPIO_PAR_CANI2C_CAN1RX_MASK));
322 		setbits_8(&gpio->par_cani2c,
323 			GPIO_PAR_CANI2C_CAN1TX_U9TXD | GPIO_PAR_CANI2C_CAN1RX_U9RXD);
324 		break;
325 #endif
326 #ifdef CONFIG_MCF5445x
327 	case 0:
328 		clrbits_8(&gpio->par_uart,
329 			GPIO_PAR_UART_U0TXD_U0TXD | GPIO_PAR_UART_U0RXD_U0RXD);
330 		setbits_8(&gpio->par_uart,
331 			GPIO_PAR_UART_U0TXD_U0TXD | GPIO_PAR_UART_U0RXD_U0RXD);
332 		break;
333 	case 1:
334 #ifdef CONFIG_SYS_UART1_PRI_GPIO
335 		clrbits_8(&gpio->par_uart,
336 			GPIO_PAR_UART_U1TXD_U1TXD | GPIO_PAR_UART_U1RXD_U1RXD);
337 		setbits_8(&gpio->par_uart,
338 			GPIO_PAR_UART_U1TXD_U1TXD | GPIO_PAR_UART_U1RXD_U1RXD);
339 #elif defined(CONFIG_SYS_UART1_ALT1_GPIO)
340 		clrbits_be16(&gpio->par_ssi,
341 			~(GPIO_PAR_SSI_SRXD_UNMASK | GPIO_PAR_SSI_STXD_UNMASK));
342 		setbits_be16(&gpio->par_ssi,
343 			GPIO_PAR_SSI_SRXD_U1RXD | GPIO_PAR_SSI_STXD_U1TXD);
344 #endif
345 		break;
346 	case 2:
347 #if defined(CONFIG_SYS_UART2_ALT1_GPIO)
348 		clrbits_8(&gpio->par_timer,
349 			~(GPIO_PAR_TIMER_T3IN_UNMASK | GPIO_PAR_TIMER_T2IN_UNMASK));
350 		setbits_8(&gpio->par_timer,
351 			GPIO_PAR_TIMER_T3IN_U2RXD | GPIO_PAR_TIMER_T2IN_U2TXD);
352 #elif defined(CONFIG_SYS_UART2_ALT2_GPIO)
353 		clrbits_8(&gpio->par_timer,
354 			~(GPIO_PAR_FECI2C_SCL_UNMASK | GPIO_PAR_FECI2C_SDA_UNMASK));
355 		setbits_8(&gpio->par_timer,
356 			GPIO_PAR_FECI2C_SCL_U2TXD | GPIO_PAR_FECI2C_SDA_U2RXD);
357 #endif
358 		break;
359 #endif	/* CONFIG_MCF5445x */
360 	}
361 }
362 
363 #if defined(CONFIG_CMD_NET)
364 int fecpin_setclear(struct eth_device *dev, int setclear)
365 {
366 	gpio_t *gpio = (gpio_t *) MMAP_GPIO;
367 #ifdef CONFIG_MCF5445x
368 	struct fec_info_s *info = (struct fec_info_s *)dev->priv;
369 
370 	if (setclear) {
371 #ifdef CONFIG_SYS_FEC_NO_SHARED_PHY
372 		if (info->iobase == CONFIG_SYS_FEC0_IOBASE)
373 			setbits_be16(&gpio->par_feci2c,
374 				GPIO_PAR_FECI2C_MDC0_MDC0 |
375 				GPIO_PAR_FECI2C_MDIO0_MDIO0);
376 		else
377 			setbits_be16(&gpio->par_feci2c,
378 				GPIO_PAR_FECI2C_MDC1_MDC1 |
379 				GPIO_PAR_FECI2C_MDIO1_MDIO1);
380 #else
381 		setbits_be16(&gpio->par_feci2c,
382 			GPIO_PAR_FECI2C_MDC0_MDC0 | GPIO_PAR_FECI2C_MDIO0_MDIO0);
383 #endif
384 
385 		if (info->iobase == CONFIG_SYS_FEC0_IOBASE)
386 			setbits_8(&gpio->par_fec, GPIO_PAR_FEC_FEC0_RMII_GPIO);
387 		else
388 			setbits_8(&gpio->par_fec, GPIO_PAR_FEC_FEC1_RMII_ATA);
389 	} else {
390 		clrbits_be16(&gpio->par_feci2c,
391 			GPIO_PAR_FECI2C_MDC0_MDC0 | GPIO_PAR_FECI2C_MDIO0_MDIO0);
392 
393 		if (info->iobase == CONFIG_SYS_FEC0_IOBASE) {
394 #ifdef CONFIG_SYS_FEC_FULL_MII
395 			setbits_8(&gpio->par_fec, GPIO_PAR_FEC_FEC0_MII);
396 #else
397 			clrbits_8(&gpio->par_fec, ~GPIO_PAR_FEC_FEC0_UNMASK);
398 #endif
399 		} else {
400 #ifdef CONFIG_SYS_FEC_FULL_MII
401 			setbits_8(&gpio->par_fec, GPIO_PAR_FEC_FEC1_MII);
402 #else
403 			clrbits_8(&gpio->par_fec, ~GPIO_PAR_FEC_FEC1_UNMASK);
404 #endif
405 		}
406 	}
407 #endif	/* CONFIG_MCF5445x */
408 
409 #ifdef CONFIG_MCF5441x
410 	if (setclear) {
411 		out_8(&gpio->par_fec, 0x03);
412 		out_8(&gpio->srcr_fec, 0x0F);
413 		clrsetbits_8(&gpio->par_simp0h, ~GPIO_PAR_SIMP0H_DAT_MASK,
414 			GPIO_PAR_SIMP0H_DAT_GPIO);
415 		clrsetbits_8(&gpio->pddr_g, ~GPIO_PDDR_G4_MASK,
416 			GPIO_PDDR_G4_OUTPUT);
417 		clrbits_8(&gpio->podr_g, ~GPIO_PODR_G4_MASK);
418 
419 	} else
420 		clrbits_8(&gpio->par_fec, ~GPIO_PAR_FEC_FEC_MASK);
421 #endif
422 	return 0;
423 }
424 #endif
425 
426 #ifdef CONFIG_CF_DSPI
427 void cfspi_port_conf(void)
428 {
429 	gpio_t *gpio = (gpio_t *) MMAP_GPIO;
430 
431 #ifdef CONFIG_MCF5445x
432 	out_8(&gpio->par_dspi,
433 		GPIO_PAR_DSPI_SIN_SIN |
434 		GPIO_PAR_DSPI_SOUT_SOUT |
435 		GPIO_PAR_DSPI_SCK_SCK);
436 #endif
437 
438 #ifdef CONFIG_MCF5441x
439 	pm_t *pm = (pm_t *) MMAP_PM;
440 
441 	out_8(&gpio->par_dspi0,
442 		GPIO_PAR_DSPI0_SIN_DSPI0SIN | GPIO_PAR_DSPI0_SOUT_DSPI0SOUT |
443 		GPIO_PAR_DSPI0_SCK_DSPI0SCK);
444 	out_8(&gpio->srcr_dspiow, 3);
445 
446 	/* DSPI0 */
447 	out_8(&pm->pmcr0, 23);
448 #endif
449 }
450 
451 int cfspi_claim_bus(uint bus, uint cs)
452 {
453 	dspi_t *dspi = (dspi_t *) MMAP_DSPI;
454 	gpio_t *gpio = (gpio_t *) MMAP_GPIO;
455 
456 	if ((in_be32(&dspi->sr) & DSPI_SR_TXRXS) != DSPI_SR_TXRXS)
457 		return -1;
458 
459 	/* Clear FIFO and resume transfer */
460 	clrbits_be32(&dspi->mcr, DSPI_MCR_CTXF | DSPI_MCR_CRXF);
461 
462 #ifdef CONFIG_MCF5445x
463 	switch (cs) {
464 	case 0:
465 		clrbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS0_PCS0);
466 		setbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS0_PCS0);
467 		break;
468 	case 1:
469 		clrbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS1_PCS1);
470 		setbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS1_PCS1);
471 		break;
472 	case 2:
473 		clrbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS2_PCS2);
474 		setbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS2_PCS2);
475 		break;
476 	case 3:
477 		clrbits_8(&gpio->par_dma, ~GPIO_PAR_DMA_DACK0_UNMASK);
478 		setbits_8(&gpio->par_dma, GPIO_PAR_DMA_DACK0_PCS3);
479 		break;
480 	case 5:
481 		clrbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS5_PCS5);
482 		setbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS5_PCS5);
483 		break;
484 	}
485 #endif
486 
487 #ifdef CONFIG_MCF5441x
488 	switch (cs) {
489 	case 0:
490 		clrbits_8(&gpio->par_dspi0, ~GPIO_PAR_DSPI0_PCS0_MASK);
491 		setbits_8(&gpio->par_dspi0, GPIO_PAR_DSPI0_PCS0_DSPI0PCS0);
492 		break;
493 	case 1:
494 		clrbits_8(&gpio->par_dspiow, GPIO_PAR_DSPIOW_DSPI0PSC1);
495 		setbits_8(&gpio->par_dspiow, GPIO_PAR_DSPIOW_DSPI0PSC1);
496 		break;
497 	}
498 #endif
499 
500 	return 0;
501 }
502 
503 void cfspi_release_bus(uint bus, uint cs)
504 {
505 	dspi_t *dspi = (dspi_t *) MMAP_DSPI;
506 	gpio_t *gpio = (gpio_t *) MMAP_GPIO;
507 
508 	/* Clear FIFO */
509 	clrbits_be32(&dspi->mcr, DSPI_MCR_CTXF | DSPI_MCR_CRXF);
510 
511 #ifdef CONFIG_MCF5445x
512 	switch (cs) {
513 	case 0:
514 		clrbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS0_PCS0);
515 		break;
516 	case 1:
517 		clrbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS1_PCS1);
518 		break;
519 	case 2:
520 		clrbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS2_PCS2);
521 		break;
522 	case 3:
523 		clrbits_8(&gpio->par_dma, ~GPIO_PAR_DMA_DACK0_UNMASK);
524 		break;
525 	case 5:
526 		clrbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS5_PCS5);
527 		break;
528 	}
529 #endif
530 
531 #ifdef CONFIG_MCF5441x
532 	if (cs == 1)
533 		clrbits_8(&gpio->par_dspiow, GPIO_PAR_DSPIOW_DSPI0PSC1);
534 #endif
535 }
536 #endif
537