xref: /openbmc/u-boot/arch/m68k/cpu/mcf530x/cpu_init.c (revision 0fa1fc43)
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * (C) Copyright 2014  Angelo Dureghello <angelo@sysam.it>
4  *
5  */
6 
7 #include <common.h>
8 #include <watchdog.h>
9 #include <asm/immap.h>
10 #include <asm/io.h>
11 
12 #if defined(CONFIG_M5307)
13 /*
14  * Simple mcf5307 chip select module init.
15  *
16  * Note: this chip has an issue reported in the device "errata":
17  * MCF5307ER Rev 4.2 reports @ section 35:
18  * Corrupted Return PC in Exception Stack Frame
19  * When processing an autovectored interrupt an error can occur that
20  * causes 0xFFFFFFFF to be written as the return PC value in the
21  * exception stack frame. The problem is caused by a conflict between
22  * an internal autovector access and a chip select mapped to the IACK
23  * address space (0xFFFFXXXX).
24  * Workaround:
25  * Set the C/I bit in the chip select mask register (CSMR) for the
26  * chip select that is mapped to 0xFFFFXXXX.
27  * This will prevent the chip select from asserting for IACK accesses.
28  */
29 
30 #define MCF5307_SP_ERR_FIX(cs_base, mask)				\
31 	do {								\
32 		if (((cs_base<<16)+(in_be32(&mask)&0xffff0000)) >=	\
33 			0xffff0000)					\
34 			setbits_be32(&mask, CSMR_CI);			\
35 	} while (0)
36 
37 void init_csm(void)
38 {
39 	csm_t *csm = (csm_t *)(MMAP_CSM);
40 
41 #if (defined(CONFIG_SYS_CS0_BASE) && defined(CONFIG_SYS_CS0_MASK) && \
42 	defined(CONFIG_SYS_CS0_CTRL))
43 	out_be16(&csm->csar0, CONFIG_SYS_CS0_BASE);
44 	out_be32(&csm->csmr0, CONFIG_SYS_CS0_MASK);
45 	out_be16(&csm->cscr0, CONFIG_SYS_CS0_CTRL);
46 	MCF5307_SP_ERR_FIX(CONFIG_SYS_CS0_BASE, csm->csmr0);
47 #else
48 #warning "Chip Select 0 are not initialized/used"
49 #endif
50 #if (defined(CONFIG_SYS_CS1_BASE) && defined(CONFIG_SYS_CS1_MASK) && \
51 	defined(CONFIG_SYS_CS1_CTRL))
52 	out_be16(&csm->csar1, CONFIG_SYS_CS1_BASE);
53 	out_be32(&csm->csmr1, CONFIG_SYS_CS1_MASK);
54 	out_be16(&csm->cscr1, CONFIG_SYS_CS1_CTRL);
55 	MCF5307_SP_ERR_FIX(CONFIG_SYS_CS1_BASE, csm->csmr1);
56 #endif
57 #if (defined(CONFIG_SYS_CS2_BASE) && defined(CONFIG_SYS_CS2_MASK) && \
58 	defined(CONFIG_SYS_CS2_CTRL))
59 	out_be16(&csm->csar2, CONFIG_SYS_CS2_BASE);
60 	out_be32(&csm->csmr2, CONFIG_SYS_CS2_MASK);
61 	out_be16(&csm->cscr2, CONFIG_SYS_CS2_CTRL);
62 	MCF5307_SP_ERR_FIX(CONFIG_SYS_CS2_BASE, csm->csmr2);
63 #endif
64 #if (defined(CONFIG_SYS_CS3_BASE) && defined(CONFIG_SYS_CS3_MASK) && \
65 	defined(CONFIG_SYS_CS3_CTRL))
66 	out_be16(&csm->csar3, CONFIG_SYS_CS3_BASE);
67 	out_be32(&csm->csmr3, CONFIG_SYS_CS3_MASK);
68 	out_be16(&csm->cscr3, CONFIG_SYS_CS3_CTRL);
69 	MCF5307_SP_ERR_FIX(CONFIG_SYS_CS3_BASE, csm->csmr3);
70 #endif
71 #if (defined(CONFIG_SYS_CS4_BASE) && defined(CONFIG_SYS_CS4_MASK) && \
72 	defined(CONFIG_SYS_CS4_CTRL))
73 	out_be16(&csm->csar4, CONFIG_SYS_CS4_BASE);
74 	out_be32(&csm->csmr4, CONFIG_SYS_CS4_MASK);
75 	out_be16(&csm->cscr4, CONFIG_SYS_CS4_CTRL);
76 	MCF5307_SP_ERR_FIX(CONFIG_SYS_CS4_BASE, csm->csmr4);
77 #endif
78 #if (defined(CONFIG_SYS_CS5_BASE) && defined(CONFIG_SYS_CS5_MASK) && \
79 	defined(CONFIG_SYS_CS5_CTRL))
80 	out_be16(&csm->csar5, CONFIG_SYS_CS5_BASE);
81 	out_be32(&csm->csmr5, CONFIG_SYS_CS5_MASK);
82 	out_be16(&csm->cscr5, CONFIG_SYS_CS5_CTRL);
83 	MCF5307_SP_ERR_FIX(CONFIG_SYS_CS5_BASE, csm->csmr5);
84 #endif
85 #if (defined(CONFIG_SYS_CS6_BASE) && defined(CONFIG_SYS_CS6_MASK) && \
86 	defined(CONFIG_SYS_CS6_CTRL))
87 	out_be16(&csm->csar6, CONFIG_SYS_CS6_BASE);
88 	out_be32(&csm->csmr6, CONFIG_SYS_CS6_MASK);
89 	out_be16(&csm->cscr6, CONFIG_SYS_CS6_CTRL);
90 	MCF5307_SP_ERR_FIX(CONFIG_SYS_CS6_BASE, csm->csmr6);
91 #endif
92 #if (defined(CONFIG_SYS_CS7_BASE) && defined(CONFIG_SYS_CS7_MASK) && \
93 	defined(CONFIG_SYS_CS7_CTRL))
94 	out_be16(&csm->csar7, CONFIG_SYS_CS7_BASE);
95 	out_be32(&csm->csmr7, CONFIG_SYS_CS7_MASK);
96 	out_be16(&csm->cscr7, CONFIG_SYS_CS7_CTRL);
97 	MCF5307_SP_ERR_FIX(CONFIG_SYS_CS7_BASE, csm->csmr7);
98 #endif
99 }
100 
101 /*
102  * Set up the memory map and initialize registers
103  */
104 void cpu_init_f(void)
105 {
106 	sim_t *sim = (sim_t *)(MMAP_SIM);
107 
108 	out_8(&sim->sypcr, 0x00);
109 	out_8(&sim->swivr, 0x0f);
110 	out_8(&sim->swsr,  0x00);
111 	out_8(&sim->mpark, 0x00);
112 
113 	intctrl_t *icr = (intctrl_t *)(MMAP_INTC);
114 
115 	/* timer 2 not masked */
116 	out_be32(&icr->imr, 0xfffffbff);
117 
118 	out_8(&icr->icr0, 0x00); /* sw watchdog */
119 	out_8(&icr->icr1, 0x00); /* timer 1     */
120 	out_8(&icr->icr2, 0x88); /* timer 2     */
121 	out_8(&icr->icr3, 0x00); /* i2c         */
122 	out_8(&icr->icr4, 0x00); /* uart 0      */
123 	out_8(&icr->icr5, 0x00); /* uart 1      */
124 	out_8(&icr->icr6, 0x00); /* dma  0      */
125 	out_8(&icr->icr7, 0x00); /* dma  1      */
126 	out_8(&icr->icr8, 0x00); /* dma  2      */
127 	out_8(&icr->icr9, 0x00); /* dma  3      */
128 
129 	/* Chipselect Init */
130 	init_csm();
131 
132 	/* enable data/instruction cache now */
133 	icache_enable();
134 }
135 
136 /*
137  * initialize higher level parts of CPU like timers
138  */
139 int cpu_init_r(void)
140 {
141 	return 0;
142 }
143 
144 void uart_port_conf(int port)
145 {
146 }
147 
148 void arch_preboot_os(void)
149 {
150 	/*
151 	 * OS can change interrupt offsets and are about to boot the OS so
152 	 * we need to make sure we disable all async interrupts.
153 	 */
154 	intctrl_t *icr = (intctrl_t *)(MMAP_INTC);
155 
156 	out_8(&icr->icr1, 0x00); /* timer 1     */
157 	out_8(&icr->icr2, 0x00); /* timer 2     */
158 }
159 #endif
160