1/* 2 * Copyright (C) 2003 Josef Baumgartner <josef.baumgartner@telex.de> 3 * Based on code from Bernhard Kuhn <bkuhn@metrowerks.com> 4 * 5 * See file CREDITS for list of people who contributed to this 6 * project. 7 * 8 * This program is free software; you can redistribute it and/or 9 * modify it under the terms of the GNU General Public License as 10 * published by the Free Software Foundation; either version 2 of 11 * the License, or (at your option) any later version. 12 * 13 * This program is distributed in the hope that it will be useful, 14 * but WITHOUT ANY WARRANTY; without even the implied warranty of 15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 16 * GNU General Public License for more details. 17 * 18 * You should have received a copy of the GNU General Public License 19 * along with this program; if not, write to the Free Software 20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 21 * MA 02111-1307 USA 22 */ 23 24#include <asm-offsets.h> 25#include <config.h> 26#include "version.h" 27#include <asm/cache.h> 28 29#ifndef CONFIG_IDENT_STRING 30#define CONFIG_IDENT_STRING "" 31#endif 32 33#define _START _start 34#define _FAULT _fault 35 36#define SAVE_ALL \ 37 move.w #0x2700,%sr; /* disable intrs */ \ 38 subl #60,%sp; /* space for 15 regs */ \ 39 moveml %d0-%d7/%a0-%a6,%sp@; 40 41#define RESTORE_ALL \ 42 moveml %sp@,%d0-%d7/%a0-%a6; \ 43 addl #60,%sp; /* space for 15 regs */ \ 44 rte; 45 46#if defined(CONFIG_CF_SBF) 47#define ASM_DRAMINIT (asm_dram_init - CONFIG_SYS_TEXT_BASE + CONFIG_SYS_INIT_RAM_ADDR) 48#define ASM_SBF_IMG_HDR (asm_sbf_img_hdr - CONFIG_SYS_TEXT_BASE + CONFIG_SYS_INIT_RAM_ADDR) 49#endif 50 51.text 52/* 53 * Vector table. This is used for initial platform startup. 54 * These vectors are to catch any un-intended traps. 55 */ 56_vectors: 57 58#if defined(CONFIG_CF_SBF) 59INITSP: .long 0 /* Initial SP */ 60INITPC: .long ASM_DRAMINIT /* Initial PC */ 61#else 62INITSP: .long 0 /* Initial SP */ 63INITPC: .long _START /* Initial PC */ 64#endif 65 66vector02: .long _FAULT /* Access Error */ 67vector03: .long _FAULT /* Address Error */ 68vector04: .long _FAULT /* Illegal Instruction */ 69vector05: .long _FAULT /* Reserved */ 70vector06: .long _FAULT /* Reserved */ 71vector07: .long _FAULT /* Reserved */ 72vector08: .long _FAULT /* Privilege Violation */ 73vector09: .long _FAULT /* Trace */ 74vector0A: .long _FAULT /* Unimplemented A-Line */ 75vector0B: .long _FAULT /* Unimplemented F-Line */ 76vector0C: .long _FAULT /* Debug Interrupt */ 77vector0D: .long _FAULT /* Reserved */ 78vector0E: .long _FAULT /* Format Error */ 79vector0F: .long _FAULT /* Unitialized Int. */ 80 81/* Reserved */ 82vector10_17: 83.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT 84 85vector18: .long _FAULT /* Spurious Interrupt */ 86vector19: .long _FAULT /* Autovector Level 1 */ 87vector1A: .long _FAULT /* Autovector Level 2 */ 88vector1B: .long _FAULT /* Autovector Level 3 */ 89vector1C: .long _FAULT /* Autovector Level 4 */ 90vector1D: .long _FAULT /* Autovector Level 5 */ 91vector1E: .long _FAULT /* Autovector Level 6 */ 92vector1F: .long _FAULT /* Autovector Level 7 */ 93 94#if !defined(CONFIG_CF_SBF) 95/* TRAP #0 - #15 */ 96vector20_2F: 97.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT 98.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT 99 100/* Reserved */ 101vector30_3F: 102.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT 103.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT 104 105vector64_127: 106.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT 107.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT 108.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT 109.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT 110.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT 111.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT 112.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT 113.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT 114 115vector128_191: 116.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT 117.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT 118.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT 119.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT 120.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT 121.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT 122.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT 123.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT 124 125vector192_255: 126.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT 127.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT 128.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT 129.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT 130.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT 131.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT 132.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT 133.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT 134#endif 135 136#if defined(CONFIG_CF_SBF) 137 /* Image header: chksum 4 bytes, len 4 bytes, img dest 4 bytes */ 138asm_sbf_img_hdr: 139 .long 0x00000000 /* checksum, not yet implemented */ 140 .long 0x00020000 /* image length */ 141 .long CONFIG_SYS_TEXT_BASE /* image to be relocated at */ 142 143asm_dram_init: 144 move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_CTRL), %d0 145 movec %d0, %RAMBAR1 /* init Rambar */ 146 move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET), %sp 147 clr.l %sp@- 148 149 /* Must disable global address */ 150 move.l #0xFC008000, %a1 151 move.l #(CONFIG_SYS_CS0_BASE), (%a1) 152 move.l #0xFC008008, %a1 153 move.l #(CONFIG_SYS_CS0_CTRL), (%a1) 154 move.l #0xFC008004, %a1 155 move.l #(CONFIG_SYS_CS0_MASK), (%a1) 156 157 /* 158 * Dram Initialization 159 * a1, a2, and d0 160 */ 161 /* mscr sdram */ 162 move.l #0xFC0A4074, %a1 163 move.b #(CONFIG_SYS_SDRAM_DRV_STRENGTH), (%a1) 164 nop 165 166 /* SDRAM Chip 0 and 1 */ 167 move.l #0xFC0B8110, %a1 168 move.l #0xFC0B8114, %a2 169 170 /* calculate the size */ 171 move.l #0x13, %d1 172 move.l #(CONFIG_SYS_SDRAM_SIZE), %d2 173#ifdef CONFIG_SYS_SDRAM_BASE1 174 lsr.l #1, %d2 175#endif 176 177dramsz_loop: 178 lsr.l #1, %d2 179 add.l #1, %d1 180 cmp.l #1, %d2 181 bne dramsz_loop 182 183 /* SDRAM Chip 0 and 1 */ 184 move.l #(CONFIG_SYS_SDRAM_BASE), (%a1) 185 or.l %d1, (%a1) 186#ifdef CONFIG_SYS_SDRAM_BASE1 187 move.l #(CONFIG_SYS_SDRAM_BASE1), (%a2) 188 or.l %d1, (%a2) 189#endif 190 nop 191 192 /* dram cfg1 and cfg2 */ 193 move.l #0xFC0B8008, %a1 194 move.l #(CONFIG_SYS_SDRAM_CFG1), (%a1) 195 nop 196 move.l #0xFC0B800C, %a2 197 move.l #(CONFIG_SYS_SDRAM_CFG2), (%a2) 198 nop 199 200 move.l #0xFC0B8000, %a1 /* Mode */ 201 move.l #0xFC0B8004, %a2 /* Ctrl */ 202 203 /* Issue PALL */ 204 move.l #(CONFIG_SYS_SDRAM_CTRL + 2), (%a2) 205 nop 206 207 /* Issue LEMR */ 208 move.l #(CONFIG_SYS_SDRAM_MODE), (%a1) 209 nop 210 move.l #(CONFIG_SYS_SDRAM_EMOD), (%a1) 211 nop 212 213 move.l #1000, %d0 214wait1000: 215 nop 216 subq.l #1, %d0 217 bne wait1000 218 219 /* Issue PALL */ 220 move.l #(CONFIG_SYS_SDRAM_CTRL + 2), (%a2) 221 nop 222 223 /* Perform two refresh cycles */ 224 move.l #(CONFIG_SYS_SDRAM_CTRL + 4), %d0 225 nop 226 move.l %d0, (%a2) 227 move.l %d0, (%a2) 228 nop 229 230 move.l #(CONFIG_SYS_SDRAM_CTRL), %d0 231 and.l #0x7FFFFFFF, %d0 232 or.l #0x10000c00, %d0 233 move.l %d0, (%a2) 234 nop 235 236 /* 237 * DSPI Initialization 238 * a0 - general, sram - 0x80008000 - 32, see M52277EVB.h 239 * a1 - dspi status 240 * a2 - dtfr 241 * a3 - drfr 242 * a4 - Dst addr 243 */ 244 245 /* Enable pins for DSPI mode - chip-selects are enabled later */ 246 move.l #0xFC0A4036, %a0 247 move.b #0x3F, %d0 248 move.b %d0, (%a0) 249 250 /* DSPI CS */ 251#ifdef CONFIG_SYS_DSPI_CS0 252 move.b (%a0), %d0 253 or.l #0xC0, %d0 254 move.b %d0, (%a0) 255#endif 256#ifdef CONFIG_SYS_DSPI_CS2 257 move.l #0xFC0A4037, %a0 258 move.b (%a0), %d0 259 or.l #0x10, %d0 260 move.b %d0, (%a0) 261#endif 262 nop 263 264 /* Configure DSPI module */ 265 move.l #0xFC05C000, %a0 266 move.l #0x80FF0C00, (%a0) /* Master, clear TX/RX FIFO */ 267 268 move.l #0xFC05C00C, %a0 269 move.l #0x3E000011, (%a0) 270 271 move.l #0xFC05C034, %a2 /* dtfr */ 272 move.l #0xFC05C03B, %a3 /* drfr */ 273 274 move.l #(ASM_SBF_IMG_HDR + 4), %a1 275 move.l (%a1)+, %d5 276 move.l (%a1), %a4 277 278 move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_SBFHDR_DATA_OFFSET), %a0 279 move.l #(CONFIG_SYS_SBFHDR_SIZE), %d4 280 281 move.l #0xFC05C02C, %a1 /* dspi status */ 282 283 /* Issue commands and address */ 284 move.l #0x8004000B, %d2 /* Fast Read Cmd */ 285 jsr asm_dspi_wr_status 286 jsr asm_dspi_rd_status 287 288 move.l #0x80040000, %d2 /* Address byte 2 */ 289 jsr asm_dspi_wr_status 290 jsr asm_dspi_rd_status 291 292 move.l #0x80040000, %d2 /* Address byte 1 */ 293 jsr asm_dspi_wr_status 294 jsr asm_dspi_rd_status 295 296 move.l #0x80040000, %d2 /* Address byte 0 */ 297 jsr asm_dspi_wr_status 298 jsr asm_dspi_rd_status 299 300 move.l #0x80040000, %d2 /* Dummy Wr and Rd */ 301 jsr asm_dspi_wr_status 302 jsr asm_dspi_rd_status 303 304 /* Transfer serial boot header to sram */ 305asm_dspi_rd_loop1: 306 move.l #0x80040000, %d2 307 jsr asm_dspi_wr_status 308 jsr asm_dspi_rd_status 309 310 move.b %d1, (%a0) /* read, copy to dst */ 311 312 add.l #1, %a0 /* inc dst by 1 */ 313 sub.l #1, %d4 /* dec cnt by 1 */ 314 bne asm_dspi_rd_loop1 315 316 /* Transfer u-boot from serial flash to memory */ 317asm_dspi_rd_loop2: 318 move.l #0x80040000, %d2 319 jsr asm_dspi_wr_status 320 jsr asm_dspi_rd_status 321 322 move.b %d1, (%a4) /* read, copy to dst */ 323 324 add.l #1, %a4 /* inc dst by 1 */ 325 sub.l #1, %d5 /* dec cnt by 1 */ 326 bne asm_dspi_rd_loop2 327 328 move.l #0x00040000, %d2 /* Terminate */ 329 jsr asm_dspi_wr_status 330 jsr asm_dspi_rd_status 331 332 /* jump to memory and execute */ 333 move.l #(CONFIG_SYS_TEXT_BASE + 0x400), %a0 334 move.l %a0, (%a1) 335 jmp (%a0) 336 337asm_dspi_wr_status: 338 move.l (%a1), %d0 /* status */ 339 and.l #0x0000F000, %d0 340 cmp.l #0x00003000, %d0 341 bgt asm_dspi_wr_status 342 343 move.l %d2, (%a2) 344 rts 345 346asm_dspi_rd_status: 347 move.l (%a1), %d0 /* status */ 348 and.l #0x000000F0, %d0 349 lsr.l #4, %d0 350 cmp.l #0, %d0 351 beq asm_dspi_rd_status 352 353 move.b (%a3), %d1 354 rts 355#endif /* CONFIG_CF_SBF */ 356 357 .text 358 . = 0x400 359 .globl _start 360_start: 361 nop 362 nop 363 move.w #0x2700,%sr /* Mask off Interrupt */ 364 365 /* Set vector base register at the beginning of the Flash */ 366#if defined(CONFIG_CF_SBF) 367 move.l #CONFIG_SYS_TEXT_BASE, %d0 368 movec %d0, %VBR 369#else 370 move.l #CONFIG_SYS_FLASH_BASE, %d0 371 movec %d0, %VBR 372 373 move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_CTRL), %d0 374 movec %d0, %RAMBAR1 375#endif 376 377 /* invalidate and disable cache */ 378 move.l #CF_CACR_CINV, %d0 /* Invalidate cache cmd */ 379 movec %d0, %CACR /* Invalidate cache */ 380 move.l #0, %d0 381 movec %d0, %ACR0 382 movec %d0, %ACR1 383 384 /* initialize general use internal ram */ 385 move.l #0, %d0 386 move.l #(ICACHE_STATUS), %a1 /* icache */ 387 move.l #(DCACHE_STATUS), %a2 /* icache */ 388 move.l %d0, (%a1) 389 move.l %d0, (%a2) 390 391 /* set stackpointer to end of internal ram to get some stackspace for 392 the first c-code */ 393 move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET), %sp 394 clr.l %sp@- 395 396 move.l #__got_start, %a5 /* put relocation table address to a5 */ 397 398 bsr cpu_init_f /* run low-level CPU init code (from flash) */ 399 bsr board_init_f /* run low-level board init code (from flash) */ 400 401 /* board_init_f() does not return */ 402 403/*------------------------------------------------------------------------------*/ 404 405/* 406 * void relocate_code (addr_sp, gd, addr_moni) 407 * 408 * This "function" does not return, instead it continues in RAM 409 * after relocating the monitor code. 410 * 411 * r3 = dest 412 * r4 = src 413 * r5 = length in bytes 414 * r6 = cachelinesize 415 */ 416 .globl relocate_code 417relocate_code: 418 link.w %a6,#0 419 move.l 8(%a6), %sp /* set new stack pointer */ 420 421 move.l 12(%a6), %d0 /* Save copy of Global Data pointer */ 422 move.l 16(%a6), %a0 /* Save copy of Destination Address */ 423 424 move.l #CONFIG_SYS_MONITOR_BASE, %a1 425 move.l #__init_end, %a2 426 move.l %a0, %a3 427 428 /* copy the code to RAM */ 4291: 430 move.l (%a1)+, (%a3)+ 431 cmp.l %a1,%a2 432 bgt.s 1b 433 434/* 435 * We are done. Do not return, instead branch to second part of board 436 * initialization, now running from RAM. 437 */ 438 move.l %a0, %a1 439 add.l #(in_ram - CONFIG_SYS_MONITOR_BASE), %a1 440 jmp (%a1) 441 442in_ram: 443 444clear_bss: 445 /* 446 * Now clear BSS segment 447 */ 448 move.l %a0, %a1 449 add.l #(_sbss - CONFIG_SYS_MONITOR_BASE),%a1 450 move.l %a0, %d1 451 add.l #(_ebss - CONFIG_SYS_MONITOR_BASE),%d1 4526: 453 clr.l (%a1)+ 454 cmp.l %a1,%d1 455 bgt.s 6b 456 457 /* 458 * fix got table in RAM 459 */ 460 move.l %a0, %a1 461 add.l #(__got_start - CONFIG_SYS_MONITOR_BASE),%a1 462 move.l %a1,%a5 /* * fix got pointer register a5 */ 463 464 move.l %a0, %a2 465 add.l #(__got_end - CONFIG_SYS_MONITOR_BASE),%a2 466 4677: 468 move.l (%a1),%d1 469 sub.l #_start,%d1 470 add.l %a0,%d1 471 move.l %d1,(%a1)+ 472 cmp.l %a2, %a1 473 bne 7b 474 475 /* calculate relative jump to board_init_r in ram */ 476 move.l %a0, %a1 477 add.l #(board_init_r - CONFIG_SYS_MONITOR_BASE), %a1 478 479 /* set parameters for board_init_r */ 480 move.l %a0,-(%sp) /* dest_addr */ 481 move.l %d0,-(%sp) /* gd */ 482 jsr (%a1) 483 484/*------------------------------------------------------------------------------*/ 485/* exception code */ 486 .globl _fault 487_fault: 488 jmp _fault 489 .globl _exc_handler 490 491_exc_handler: 492 SAVE_ALL 493 movel %sp,%sp@- 494 bsr exc_handler 495 addql #4,%sp 496 RESTORE_ALL 497 498 .globl _int_handler 499_int_handler: 500 SAVE_ALL 501 movel %sp,%sp@- 502 bsr int_handler 503 addql #4,%sp 504 RESTORE_ALL 505 506/*------------------------------------------------------------------------------*/ 507 508 .globl version_string 509version_string: 510 .ascii U_BOOT_VERSION_STRING, "\0" 511 .align 4 512