xref: /openbmc/u-boot/arch/m68k/cpu/mcf5227x/start.S (revision 0649cd0d) 
1/*
2 * Copyright (C) 2003	Josef Baumgartner <josef.baumgartner@telex.de>
3 * Based on code from Bernhard Kuhn <bkuhn@metrowerks.com>
4 *
5 * SPDX-License-Identifier:	GPL-2.0+
6 */
7
8#include <asm-offsets.h>
9#include <config.h>
10#include "version.h"
11#include <asm/cache.h>
12
13#define _START	_start
14#define _FAULT	_fault
15
16#define SAVE_ALL						\
17	move.w	#0x2700,%sr;		/* disable intrs */	\
18	subl	#60,%sp;		/* space for 15 regs */ \
19	moveml	%d0-%d7/%a0-%a6,%sp@;
20
21#define RESTORE_ALL						\
22	moveml	%sp@,%d0-%d7/%a0-%a6;				\
23	addl	#60,%sp;		/* space for 15 regs */ \
24	rte;
25
26#if defined(CONFIG_CF_SBF)
27#define ASM_DRAMINIT	(asm_dram_init - CONFIG_SYS_TEXT_BASE + \
28	CONFIG_SYS_INIT_RAM_ADDR)
29#define ASM_SBF_IMG_HDR	(asm_sbf_img_hdr - CONFIG_SYS_TEXT_BASE + \
30	CONFIG_SYS_INIT_RAM_ADDR)
31#endif
32
33.text
34
35/*
36 * Vector table. This is used for initial platform startup.
37 * These vectors are to catch any un-intended traps.
38 */
39_vectors:
40#if defined(CONFIG_CF_SBF)
41INITSP:	.long	0			/* Initial SP	*/
42INITPC:	.long	ASM_DRAMINIT		/* Initial PC 	*/
43#else
44INITSP:	.long	0			/* Initial SP	*/
45INITPC:	.long	_START			/* Initial PC 	*/
46#endif
47
48vector02_0F:
49.long	_FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
50.long	_FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
51
52/* Reserved */
53vector10_17:
54.long	_FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
55
56vector18_1F:
57.long	_FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
58
59#if !defined(CONFIG_CF_SBF)
60/* TRAP #0 - #15 */
61vector20_2F:
62.long	_FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
63.long	_FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
64
65/* Reserved	*/
66vector30_3F:
67.long	_FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
68.long	_FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
69
70vector64_127:
71.long	_FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
72.long	_FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
73.long	_FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
74.long	_FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
75.long	_FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
76.long	_FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
77.long	_FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
78.long	_FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
79
80vector128_191:
81.long	_FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
82.long	_FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
83.long	_FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
84.long	_FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
85.long	_FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
86.long	_FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
87.long	_FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
88.long	_FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
89
90vector192_255:
91.long	_FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
92.long	_FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
93.long	_FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
94.long	_FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
95.long	_FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
96.long	_FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
97.long	_FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
98.long	_FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
99#endif
100
101#if defined(CONFIG_CF_SBF)
102	/* Image header: chksum 4 bytes, len 4 bytes, img dest 4 bytes */
103asm_sbf_img_hdr:
104	.long	0x00000000		/* checksum, not yet implemented */
105	.long	0x00020000		/* image length */
106	.long	CONFIG_SYS_TEXT_BASE	/* image to be relocated at */
107
108asm_dram_init:
109	move.l	#(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_CTRL), %d0
110	movec	%d0, %RAMBAR1		/* init Rambar */
111
112	move.l	#(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET), %sp
113	clr.l	%sp@-
114
115	/* Must disable global address */
116	move.l	#0xFC008000, %a1
117	move.l	#(CONFIG_SYS_CS0_BASE), (%a1)
118	move.l	#0xFC008008, %a1
119	move.l	#(CONFIG_SYS_CS0_CTRL), (%a1)
120	move.l	#0xFC008004, %a1
121	move.l	#(CONFIG_SYS_CS0_MASK), (%a1)
122
123	/*
124	 * Dram Initialization
125	 * a1, a2, and d0
126	 */
127	move.l	#0xFC0A4074, %a1
128	move.b	#(CONFIG_SYS_SDRAM_DRV_STRENGTH), (%a1)
129	nop
130
131	/* SDRAM Chip 0 and 1 */
132	move.l	#0xFC0B8110, %a1
133	move.l	#0xFC0B8114, %a2
134
135	/* calculate the size */
136	move.l	#0x13, %d1
137	move.l	#(CONFIG_SYS_SDRAM_SIZE), %d2
138#ifdef CONFIG_SYS_SDRAM_BASE1
139	lsr.l	#1, %d2
140#endif
141
142dramsz_loop:
143	lsr.l	#1, %d2
144	add.l	#1, %d1
145	cmp.l	#1, %d2
146	bne	dramsz_loop
147
148	/* SDRAM Chip 0 and 1 */
149	move.l	#(CONFIG_SYS_SDRAM_BASE), (%a1)
150	or.l	%d1, (%a1)
151#ifdef CONFIG_SYS_SDRAM_BASE1
152	move.l	#(CONFIG_SYS_SDRAM_BASE1), (%a2)
153	or.l	%d1, (%a2)
154#endif
155	nop
156
157	/* dram cfg1 and cfg2 */
158	move.l	#0xFC0B8008, %a1
159	move.l	#(CONFIG_SYS_SDRAM_CFG1), (%a1)
160	nop
161	move.l	#0xFC0B800C, %a2
162	move.l	#(CONFIG_SYS_SDRAM_CFG2), (%a2)
163	nop
164
165	move.l	#0xFC0B8000, %a1	/* Mode */
166	move.l	#0xFC0B8004, %a2	/* Ctrl */
167
168	/* Issue PALL */
169	move.l	#(CONFIG_SYS_SDRAM_CTRL + 2), (%a2)
170	nop
171
172	/* Issue LEMR */
173	move.l	#(CONFIG_SYS_SDRAM_MODE), (%a1)
174	nop
175	move.l	#(CONFIG_SYS_SDRAM_EMOD), (%a1)
176	nop
177
178	move.l	#1000, %d0
179wait1000:
180	nop
181	subq.l	#1, %d0
182	bne	wait1000
183
184	/* Issue PALL */
185	move.l	#(CONFIG_SYS_SDRAM_CTRL + 2), (%a2)
186	nop
187
188	/* Perform two refresh cycles */
189	move.l	#(CONFIG_SYS_SDRAM_CTRL + 4), %d0
190	nop
191	move.l	%d0, (%a2)
192	move.l	%d0, (%a2)
193	nop
194
195	move.l	#(CONFIG_SYS_SDRAM_CTRL), %d0
196	and.l	#0x7FFFFFFF, %d0
197	or.l	#0x10000c00, %d0
198	move.l	%d0, (%a2)
199	nop
200
201	/*
202	 * DSPI Initialization
203	 * a0 - general, sram - 0x80008000 - 32, see M52277EVB.h
204	 * a1 - dspi status
205	 * a2 - dtfr
206	 * a3 - drfr
207	 * a4 - Dst addr
208	 */
209
210	/* Enable pins for DSPI mode - chip-selects are enabled later */
211	move.l	#0xFC0A4036, %a0
212	move.b	#0x3F, %d0
213	move.b	%d0, (%a0)
214
215	/* DSPI CS */
216#ifdef CONFIG_SYS_DSPI_CS0
217	move.b	(%a0), %d0
218	or.l	#0xC0, %d0
219	move.b	%d0, (%a0)
220#endif
221#ifdef CONFIG_SYS_DSPI_CS2
222	move.l	#0xFC0A4037, %a0
223	move.b	(%a0), %d0
224	or.l	#0x10, %d0
225	move.b	%d0, (%a0)
226#endif
227	nop
228
229	/* Configure DSPI module */
230	move.l	#0xFC05C000, %a0
231	move.l	#0x80FF0C00, (%a0)	/* Master, clear TX/RX FIFO */
232
233	move.l	#0xFC05C00C, %a0
234	move.l	#0x3E000011, (%a0)
235
236	move.l	#0xFC05C034, %a2	/* dtfr */
237	move.l	#0xFC05C03B, %a3	/* drfr */
238
239	move.l	#(ASM_SBF_IMG_HDR + 4), %a1
240	move.l	(%a1)+, %d5
241	move.l	(%a1), %a4
242
243	move.l	#(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_SBFHDR_DATA_OFFSET), %a0
244	move.l	#(CONFIG_SYS_SBFHDR_SIZE), %d4
245
246	move.l	#0xFC05C02C, %a1	/* dspi status */
247
248	/* Issue commands and address */
249	move.l	#0x8004000B, %d2	/* Fast Read Cmd */
250	jsr	asm_dspi_wr_status
251	jsr	asm_dspi_rd_status
252
253	move.l	#0x80040000, %d2	/* Address byte 2 */
254	jsr	asm_dspi_wr_status
255	jsr	asm_dspi_rd_status
256
257	move.l	#0x80040000, %d2	/* Address byte 1 */
258	jsr	asm_dspi_wr_status
259	jsr	asm_dspi_rd_status
260
261	move.l	#0x80040000, %d2	/* Address byte 0 */
262	jsr	asm_dspi_wr_status
263	jsr	asm_dspi_rd_status
264
265	move.l	#0x80040000, %d2	/* Dummy Wr and Rd */
266	jsr	asm_dspi_wr_status
267	jsr	asm_dspi_rd_status
268
269	/* Transfer serial boot header to sram */
270asm_dspi_rd_loop1:
271	move.l	#0x80040000, %d2
272	jsr	asm_dspi_wr_status
273	jsr	asm_dspi_rd_status
274
275	move.b	%d1, (%a0)		/* read, copy to dst */
276
277	add.l	#1, %a0			/* inc dst by 1 */
278	sub.l	#1, %d4			/* dec cnt by 1 */
279	bne	asm_dspi_rd_loop1
280
281	/* Transfer u-boot from serial flash to memory */
282asm_dspi_rd_loop2:
283	move.l	#0x80040000, %d2
284	jsr	asm_dspi_wr_status
285	jsr	asm_dspi_rd_status
286
287	move.b	%d1, (%a4)		/* read, copy to dst */
288
289	add.l	#1, %a4			/* inc dst by 1 */
290	sub.l	#1, %d5			/* dec cnt by 1 */
291	bne	asm_dspi_rd_loop2
292
293	move.l	#0x00040000, %d2	/* Terminate */
294	jsr	asm_dspi_wr_status
295	jsr	asm_dspi_rd_status
296
297	/* jump to memory and execute */
298	move.l	#(CONFIG_SYS_TEXT_BASE + 0x400), %a0
299	move.l	%a0, (%a1)
300	jmp	(%a0)
301
302asm_dspi_wr_status:
303	move.l	(%a1), %d0		/* status */
304	and.l	#0x0000F000, %d0
305	cmp.l	#0x00003000, %d0
306	bgt	asm_dspi_wr_status
307
308	move.l	%d2, (%a2)
309	rts
310
311asm_dspi_rd_status:
312	move.l	(%a1), %d0		/* status */
313	and.l	#0x000000F0, %d0
314	lsr.l	#4, %d0
315	cmp.l	#0, %d0
316	beq	asm_dspi_rd_status
317
318	move.b	(%a3), %d1
319	rts
320#endif /* CONFIG_CF_SBF */
321
322.text
323	. = 0x400
324.globl _start
325_start:
326	nop
327	nop
328	move.w	#0x2700,%sr		/* Mask off Interrupt */
329
330	/* Set vector base register at the beginning of the Flash */
331#if defined(CONFIG_CF_SBF)
332	move.l	#CONFIG_SYS_TEXT_BASE, %d0
333	movec	%d0, %VBR
334#else
335	move.l	#CONFIG_SYS_FLASH_BASE, %d0
336	movec	%d0, %VBR
337
338	move.l	#(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_CTRL), %d0
339	movec	%d0, %RAMBAR1
340#endif
341
342	/* invalidate and disable cache */
343	move.l	#CF_CACR_CINV, %d0	/* Invalidate cache cmd */
344	movec	%d0, %CACR		/* Invalidate cache */
345	move.l	#0, %d0
346	movec	%d0, %ACR0
347	movec	%d0, %ACR1
348
349	/* initialize general use internal ram */
350	move.l	#0, %d0
351	move.l	#(ICACHE_STATUS), %a1	/* icache */
352	move.l	#(DCACHE_STATUS), %a2	/* icache */
353	move.l	%d0, (%a1)
354	move.l	%d0, (%a2)
355
356	/* put relocation table address to a5 */
357	move.l	#__got_start, %a5
358
359	/* setup stack initially on top of internal static ram  */
360	move.l	#(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE), %sp
361
362	/*
363	 * if configured, malloc_f arena will be reserved first,
364	 * then (and always) gd struct space will be reserved
365	 */
366	move.l	%sp, -(%sp)
367	bsr	board_init_f_alloc_reserve
368
369	/* update stack and frame-pointers */
370	move.l	%d0, %sp
371	move.l	%sp, %fp
372
373	/* initialize reserved area */
374	move.l	%d0, -(%sp)
375	bsr	board_init_f_init_reserve
376
377	/* run low-level CPU init code (from flash) */
378	bsr	cpu_init_f
379	clr.l	%sp@-
380
381	/* run low-level board init code (from flash) */
382	bsr	board_init_f
383
384	/* board_init_f() does not return */
385
386/******************************************************************************/
387
388/*
389 * void relocate_code (addr_sp, gd, addr_moni)
390 *
391 * This "function" does not return, instead it continues in RAM
392 * after relocating the monitor code.
393 *
394 * r3 = dest
395 * r4 = src
396 * r5 = length in bytes
397 * r6 = cachelinesize
398 */
399.globl relocate_code
400relocate_code:
401	link.w	%a6,#0
402	move.l	8(%a6), %sp		/* set new stack pointer */
403
404	move.l	12(%a6), %d0		/* Save copy of Global Data pointer */
405	move.l	16(%a6), %a0		/* Save copy of Destination Address */
406
407	move.l	#CONFIG_SYS_MONITOR_BASE, %a1
408	move.l	#__init_end, %a2
409	move.l	%a0, %a3
410
411	/* copy the code to RAM */
4121:
413	move.l	(%a1)+, (%a3)+
414	cmp.l	%a1,%a2
415	bgt.s	1b
416
417/*
418 * We are done. Do not return, instead branch to second part of board
419 * initialization, now running from RAM.
420 */
421	move.l	%a0, %a1
422	add.l	#(in_ram - CONFIG_SYS_MONITOR_BASE), %a1
423	jmp	(%a1)
424
425in_ram:
426
427clear_bss:
428	/*
429	 * Now clear BSS segment
430	 */
431	move.l	%a0, %a1
432	add.l	#(_sbss - CONFIG_SYS_MONITOR_BASE),%a1
433	move.l	%a0, %d1
434	add.l	#(_ebss - CONFIG_SYS_MONITOR_BASE),%d1
4356:
436	clr.l	(%a1)+
437	cmp.l	%a1,%d1
438	bgt.s	6b
439
440	/*
441	 * fix got table in RAM
442	 */
443	move.l	%a0, %a1
444	add.l	#(__got_start - CONFIG_SYS_MONITOR_BASE),%a1
445	move.l	%a1,%a5			/* fix got pointer register a5 */
446
447	move.l	%a0, %a2
448	add.l	#(__got_end - CONFIG_SYS_MONITOR_BASE),%a2
449
4507:
451	move.l	(%a1),%d1
452	sub.l	#_start,%d1
453	add.l	%a0,%d1
454	move.l	%d1,(%a1)+
455	cmp.l	%a2, %a1
456	bne	7b
457
458	/* calculate relative jump to board_init_r in ram */
459	move.l	%a0, %a1
460	add.l	#(board_init_r - CONFIG_SYS_MONITOR_BASE), %a1
461
462	/* set parameters for board_init_r */
463	move.l	%a0,-(%sp)		/* dest_addr */
464	move.l	%d0,-(%sp)		/* gd */
465	jsr	(%a1)
466
467/******************************************************************************/
468
469/* exception code */
470.globl _fault
471_fault:
472	bra	_fault
473
474.globl _exc_handler
475_exc_handler:
476	SAVE_ALL
477	movel	%sp,%sp@-
478	bsr	exc_handler
479	addql	#4,%sp
480	RESTORE_ALL
481
482.globl _int_handler
483_int_handler:
484	SAVE_ALL
485	movel	%sp,%sp@-
486	bsr	int_handler
487	addql	#4,%sp
488	RESTORE_ALL
489
490/******************************************************************************/
491
492.globl version_string
493version_string:
494.ascii U_BOOT_VERSION_STRING, "\0"
495.align 4
496