xref: /openbmc/u-boot/arch/arm/mach-zynq/clk.c (revision 6e87ae1c)
1 /*
2  * Copyright (C) 2013 Soren Brinkmann <soren.brinkmann@xilinx.com>
3  * Copyright (C) 2013 Xilinx, Inc. All rights reserved.
4  *
5  * SPDX-License-Identifier:	GPL-2.0+
6  */
7 #include <clk.h>
8 #include <common.h>
9 #include <dm.h>
10 #include <asm/arch/clk.h>
11 
12 DECLARE_GLOBAL_DATA_PTR;
13 
14 static const char * const clk_names[clk_max] = {
15 	"armpll", "ddrpll", "iopll",
16 	"cpu_6or4x", "cpu_3or2x", "cpu_2x", "cpu_1x",
17 	"ddr2x", "ddr3x", "dci",
18 	"lqspi", "smc", "pcap", "gem0", "gem1",
19 	"fclk0", "fclk1", "fclk2", "fclk3", "can0", "can1",
20 	"sdio0", "sdio1", "uart0", "uart1", "spi0", "spi1", "dma",
21 	"usb0_aper", "usb1_aper", "gem0_aper", "gem1_aper",
22 	"sdio0_aper", "sdio1_aper", "spi0_aper", "spi1_aper",
23 	"can0_aper", "can1_aper", "i2c0_aper", "i2c1_aper",
24 	"uart0_aper", "uart1_aper", "gpio_aper", "lqspi_aper",
25 	"smc_aper", "swdt", "dbg_trc", "dbg_apb"
26 };
27 
28 /**
29  * set_cpu_clk_info() - Setup clock information
30  *
31  * This function is called from common code after relocation and sets up the
32  * clock information.
33  */
34 int set_cpu_clk_info(void)
35 {
36 	struct clk clk;
37 	struct udevice *dev;
38 	ulong rate;
39 	int i, ret;
40 
41 	ret = uclass_get_device_by_driver(UCLASS_CLK,
42 		DM_GET_DRIVER(zynq_clk), &dev);
43 	if (ret)
44 		return ret;
45 
46 	for (i = 0; i < 2; i++) {
47 		clk.id = i ? ddr3x_clk : cpu_6or4x_clk;
48 		ret = clk_request(dev, &clk);
49 		if (ret < 0)
50 			return ret;
51 
52 		rate = clk_get_rate(&clk) / 1000000;
53 		if (i)
54 			gd->bd->bi_ddr_freq = rate;
55 		else
56 			gd->bd->bi_arm_freq = rate;
57 
58 		clk_free(&clk);
59 	}
60 	gd->bd->bi_dsp_freq = 0;
61 
62 	return 0;
63 }
64 
65 /**
66  * soc_clk_dump() - Print clock frequencies
67  * Returns zero on success
68  *
69  * Implementation for the clk dump command.
70  */
71 int soc_clk_dump(void)
72 {
73 	struct udevice *dev;
74 	int i, ret;
75 
76 	ret = uclass_get_device_by_driver(UCLASS_CLK,
77 		DM_GET_DRIVER(zynq_clk), &dev);
78 	if (ret)
79 		return ret;
80 
81 	printf("clk\t\tfrequency\n");
82 	for (i = 0; i < clk_max; i++) {
83 		const char *name = clk_names[i];
84 		if (name) {
85 			struct clk clk;
86 			unsigned long rate;
87 
88 			clk.id = i;
89 			ret = clk_request(dev, &clk);
90 			if (ret < 0)
91 				return ret;
92 
93 			rate = clk_get_rate(&clk);
94 
95 			clk_free(&clk);
96 
97 			if (rate == (unsigned long)-ENOSYS)
98 				printf("%10s%20s\n", name, "unknown");
99 			else
100 				printf("%10s%20lu\n", name, rate);
101 		}
102 	}
103 
104 	return 0;
105 }
106