1/*
2 * On-chip UART initializaion for low-level debugging
3 *
4 * Copyright (C) 2014-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
5 *
6 * SPDX-License-Identifier:	GPL-2.0+
7 */
8
9#include <linux/serial_reg.h>
10#include <linux/linkage.h>
11
12#include "../bcu/bcu-regs.h"
13#include "../sc-regs.h"
14#include "../sg-regs.h"
15
16#if !defined(CONFIG_DEBUG_SEMIHOSTING)
17#include CONFIG_DEBUG_LL_INCLUDE
18#endif
19
20#define BAUDRATE		115200
21#define DIV_ROUND(x, d)		(((x) + ((d) / 2)) / (d))
22
23ENTRY(debug_ll_init)
24	ldr		r0, =SG_REVISION
25	ldr		r1, [r0]
26	and		r1, r1, #SG_REVISION_TYPE_MASK
27	mov		r1, r1, lsr #SG_REVISION_TYPE_SHIFT
28
29#if defined(CONFIG_ARCH_UNIPHIER_PH1_SLD3)
30#define PH1_SLD3_UART_CLK		36864000
31	cmp		r1, #0x25
32	bne		ph1_sld3_end
33
34	sg_set_pinsel	64, 1, 4, 4, r0, r1	@ TXD0 -> TXD0
35
36	ldr		r0, =BCSCR5
37	ldr		r1, =0x24440000
38	str		r1, [r0]
39
40	ldr		r0, =SC_CLKCTRL
41	ldr		r1, [r0]
42	orr		r1, r1, #SC_CLKCTRL_CEN_PERI
43	str		r1, [r0]
44
45	ldr		r3, =DIV_ROUND(PH1_SLD3_UART_CLK, 16 * BAUDRATE)
46
47	b		init_uart
48ph1_sld3_end:
49#endif
50#if defined(CONFIG_ARCH_UNIPHIER_PH1_LD4)
51#define PH1_LD4_UART_CLK		36864000
52	cmp		r1, #0x26
53	bne		ph1_ld4_end
54
55	ldr		r0, =SG_IECTRL
56	ldr		r1, [r0]
57	orr		r1, r1, #1
58	str		r1, [r0]
59
60	sg_set_pinsel	88, 1, 8, 4, r0, r1	@ HSDOUT6 -> TXD0
61
62	ldr		r3, =DIV_ROUND(PH1_LD4_UART_CLK, 16 * BAUDRATE)
63
64	b		init_uart
65ph1_ld4_end:
66#endif
67#if defined(CONFIG_ARCH_UNIPHIER_PH1_PRO4)
68#define PH1_PRO4_UART_CLK		73728000
69	cmp		r1, #0x28
70	bne		ph1_pro4_end
71
72	sg_set_pinsel	128, 0, 4, 8, r0, r1	@ TXD0 -> TXD0
73
74	ldr		r0, =SG_LOADPINCTRL
75	mov		r1, #1
76	str		r1, [r0]
77
78	ldr		r0, =SC_CLKCTRL
79	ldr		r1, [r0]
80	orr		r1, r1, #SC_CLKCTRL_CEN_PERI
81	str		r1, [r0]
82
83	ldr		r3, =DIV_ROUND(PH1_PRO4_UART_CLK, 16 * BAUDRATE)
84
85	b		init_uart
86ph1_pro4_end:
87#endif
88#if defined(CONFIG_ARCH_UNIPHIER_PH1_SLD8)
89#define PH1_SLD8_UART_CLK		80000000
90	cmp		r1, #0x29
91	bne		ph1_sld8_end
92
93	ldr		r0, =SG_IECTRL
94	ldr		r1, [r0]
95	orr		r1, r1, #1
96	str		r1, [r0]
97
98	sg_set_pinsel	70, 3, 8, 4, r0, r1	@ HSDOUT0 -> TXD0
99
100	ldr		r3, =DIV_ROUND(PH1_SLD8_UART_CLK, 16 * BAUDRATE)
101
102	b		init_uart
103ph1_sld8_end:
104#endif
105#if defined(CONFIG_ARCH_UNIPHIER_PH1_PRO5)
106#define PH1_PRO5_UART_CLK		73728000
107	cmp		r1, #0x2A
108	bne		ph1_pro5_end
109
110	sg_set_pinsel	47, 0, 4, 8, r0, r1	@ TXD0 -> TXD0
111	sg_set_pinsel	49, 0, 4, 8, r0, r1	@ TXD1 -> TXD1
112	sg_set_pinsel	51, 0, 4, 8, r0, r1	@ TXD2 -> TXD2
113	sg_set_pinsel	53, 0, 4, 8, r0, r1	@ TXD3 -> TXD3
114
115	ldr		r0, =SG_LOADPINCTRL
116	mov		r1, #1
117	str		r1, [r0]
118
119	ldr		r0, =SC_CLKCTRL
120	ldr		r1, [r0]
121	orr		r1, r1, #SC_CLKCTRL_CEN_PERI
122	str		r1, [r0]
123
124	ldr		r3, =DIV_ROUND(PH1_PRO5_UART_CLK, 16 * BAUDRATE)
125
126	b		init_uart
127ph1_pro5_end:
128#endif
129#if defined(CONFIG_ARCH_UNIPHIER_PROXSTREAM2)
130#define PROXSTREAM2_UART_CLK		88900000
131	cmp		r1, #0x2E
132	bne		proxstream2_end
133
134	ldr		r0, =SG_IECTRL
135	ldr		r1, [r0]
136	orr		r1, r1, #1
137	str		r1, [r0]
138
139	sg_set_pinsel	217, 8, 8, 4, r0, r1	@ TXD0 -> TXD0
140	sg_set_pinsel	115, 8, 8, 4, r0, r1	@ TXD1 -> TXD1
141	sg_set_pinsel	113, 8, 8, 4, r0, r1	@ TXD2 -> TXD2
142	sg_set_pinsel	219, 8, 8, 4, r0, r1	@ TXD3 -> TXD3
143
144	ldr		r0, =SC_CLKCTRL
145	ldr		r1, [r0]
146	orr		r1, r1, #SC_CLKCTRL_CEN_PERI
147	str		r1, [r0]
148
149	ldr		r3, =DIV_ROUND(PROXSTREAM2_UART_CLK, 16 * BAUDRATE)
150
151	b		init_uart
152proxstream2_end:
153#endif
154#if defined(CONFIG_ARCH_UNIPHIER_PH1_LD6B)
155#define PH1_LD6B_UART_CLK		88900000
156	cmp		r1, #0x2F
157	bne		ph1_ld6b_end
158
159	ldr		r0, =SG_IECTRL
160	ldr		r1, [r0]
161	orr		r1, r1, #1
162	str		r1, [r0]
163
164	sg_set_pinsel	135, 3, 8, 4, r0, r1	@ PORT10 -> TXD0
165	sg_set_pinsel	115, 0, 8, 4, r0, r1	@ TXD1 -> TXD1
166	sg_set_pinsel	113, 2, 8, 4, r0, r1	@ SBO0 -> TXD2
167
168	ldr		r0, =SC_CLKCTRL
169	ldr		r1, [r0]
170	orr		r1, r1, #SC_CLKCTRL_CEN_PERI
171	str		r1, [r0]
172
173	ldr		r3, =DIV_ROUND(PH1_LD6B_UART_CLK, 16 * BAUDRATE)
174
175	b		init_uart
176ph1_ld6b_end:
177#endif
178
179init_uart:
180	addruart	r0, r1, r2
181	mov		r1, #UART_LCR_WLEN8 << 8
182	str		r1, [r0, #0x10]
183	str		r3, [r0, #0x24]
184
185	mov		pc, lr
186ENDPROC(debug_ll_init)
187