1 /*
2  * (C) Copyright 2013-2015
3  * NVIDIA Corporation <www.nvidia.com>
4  *
5  * SPDX-License-Identifier:     GPL-2.0+
6  */
7 
8 /* Tegra210 Clock control functions */
9 
10 #include <common.h>
11 #include <asm/io.h>
12 #include <asm/arch/clock.h>
13 #include <asm/arch/sysctr.h>
14 #include <asm/arch/tegra.h>
15 #include <asm/arch-tegra/clk_rst.h>
16 #include <asm/arch-tegra/timer.h>
17 #include <div64.h>
18 #include <fdtdec.h>
19 
20 /*
21  * Clock types that we can use as a source. The Tegra210 has muxes for the
22  * peripheral clocks, and in most cases there are four options for the clock
23  * source. This gives us a clock 'type' and exploits what commonality exists
24  * in the device.
25  *
26  * Letters are obvious, except for T which means CLK_M, and S which means the
27  * clock derived from 32KHz. Beware that CLK_M (also called OSC in the
28  * datasheet) and PLL_M are different things. The former is the basic
29  * clock supplied to the SOC from an external oscillator. The latter is the
30  * memory clock PLL.
31  *
32  * See definitions in clock_id in the header file.
33  */
34 enum clock_type_id {
35 	CLOCK_TYPE_AXPT,	/* PLL_A, PLL_X, PLL_P, CLK_M */
36 	CLOCK_TYPE_MCPA,	/* and so on */
37 	CLOCK_TYPE_MCPT,
38 	CLOCK_TYPE_PCM,
39 	CLOCK_TYPE_PCMT,
40 	CLOCK_TYPE_PDCT,
41 	CLOCK_TYPE_ACPT,
42 	CLOCK_TYPE_ASPTE,
43 	CLOCK_TYPE_PMDACD2T,
44 	CLOCK_TYPE_PCST,
45 
46 	CLOCK_TYPE_PC2CC3M,
47 	CLOCK_TYPE_PC2CC3S_T,
48 	CLOCK_TYPE_PC2CC3M_T,
49 	CLOCK_TYPE_PC2CC3M_T16,	/* PC2CC3M_T, but w/16-bit divisor (I2C) */
50 	CLOCK_TYPE_MC2CC3P_A,
51 	CLOCK_TYPE_M,
52 	CLOCK_TYPE_MCPTM2C2C3,
53 	CLOCK_TYPE_PC2CC3T_S,
54 	CLOCK_TYPE_AC2CC3P_TS2,
55 	CLOCK_TYPE_PC01C00_C42C41TC40,
56 
57 	CLOCK_TYPE_COUNT,
58 	CLOCK_TYPE_NONE = -1,   /* invalid clock type */
59 };
60 
61 enum {
62 	CLOCK_MAX_MUX   = 8     /* number of source options for each clock */
63 };
64 
65 /*
66  * Clock source mux for each clock type. This just converts our enum into
67  * a list of mux sources for use by the code.
68  *
69  * Note:
70  *  The extra column in each clock source array is used to store the mask
71  *  bits in its register for the source.
72  */
73 #define CLK(x) CLOCK_ID_ ## x
74 static enum clock_id clock_source[CLOCK_TYPE_COUNT][CLOCK_MAX_MUX+1] = {
75 	{ CLK(AUDIO),	CLK(XCPU),	CLK(PERIPH),	CLK(OSC),
76 		CLK(NONE),	CLK(NONE),	CLK(NONE),	CLK(NONE),
77 		MASK_BITS_31_30},
78 	{ CLK(MEMORY),	CLK(CGENERAL),	CLK(PERIPH),	CLK(AUDIO),
79 		CLK(NONE),	CLK(NONE),	CLK(NONE),	CLK(NONE),
80 		MASK_BITS_31_30},
81 	{ CLK(MEMORY),	CLK(CGENERAL),	CLK(PERIPH),	CLK(OSC),
82 		CLK(NONE),	CLK(NONE),	CLK(NONE),	CLK(NONE),
83 		MASK_BITS_31_30},
84 	{ CLK(PERIPH),	CLK(CGENERAL),	CLK(MEMORY),	CLK(NONE),
85 		CLK(NONE),	CLK(NONE),	CLK(NONE),	CLK(NONE),
86 		MASK_BITS_31_30},
87 	{ CLK(PERIPH),	CLK(CGENERAL),	CLK(MEMORY),	CLK(OSC),
88 		CLK(NONE),	CLK(NONE),	CLK(NONE),	CLK(NONE),
89 		MASK_BITS_31_30},
90 	{ CLK(PERIPH),	CLK(DISPLAY),	CLK(CGENERAL),	CLK(OSC),
91 		CLK(NONE),	CLK(NONE),	CLK(NONE),	CLK(NONE),
92 		MASK_BITS_31_30},
93 	{ CLK(AUDIO),	CLK(CGENERAL),	CLK(PERIPH),	CLK(OSC),
94 		CLK(NONE),	CLK(NONE),	CLK(NONE),	CLK(NONE),
95 		MASK_BITS_31_30},
96 	{ CLK(AUDIO),	CLK(SFROM32KHZ),	CLK(PERIPH),	CLK(OSC),
97 		CLK(EPCI),	CLK(NONE),	CLK(NONE),	CLK(NONE),
98 		MASK_BITS_31_29},
99 	{ CLK(PERIPH),	CLK(MEMORY),	CLK(DISPLAY),	CLK(AUDIO),
100 		CLK(CGENERAL),	CLK(DISPLAY2),	CLK(OSC),	CLK(NONE),
101 		MASK_BITS_31_29},
102 	{ CLK(PERIPH),	CLK(CGENERAL),	CLK(SFROM32KHZ),	CLK(OSC),
103 		CLK(NONE),	CLK(NONE),	CLK(NONE),	CLK(NONE),
104 		MASK_BITS_31_28},
105 
106 	/* Additional clock types on Tegra114+ */
107 	/* CLOCK_TYPE_PC2CC3M */
108 	{ CLK(PERIPH),	CLK(CGENERAL2),	CLK(CGENERAL),	CLK(CGENERAL3),
109 		CLK(MEMORY),	CLK(NONE),	CLK(NONE),	CLK(NONE),
110 		MASK_BITS_31_29},
111 	/* CLOCK_TYPE_PC2CC3S_T */
112 	{ CLK(PERIPH),	CLK(CGENERAL2),	CLK(CGENERAL),	CLK(CGENERAL3),
113 		CLK(SFROM32KHZ), CLK(NONE),	CLK(OSC),	CLK(NONE),
114 		MASK_BITS_31_29},
115 	/* CLOCK_TYPE_PC2CC3M_T */
116 	{ CLK(PERIPH),	CLK(CGENERAL2),	CLK(CGENERAL),	CLK(CGENERAL3),
117 		CLK(MEMORY),	CLK(NONE),	CLK(OSC),	CLK(NONE),
118 		MASK_BITS_31_29},
119 	/* CLOCK_TYPE_PC2CC3M_T, w/16-bit divisor (I2C) */
120 	{ CLK(PERIPH),	CLK(CGENERAL2),	CLK(CGENERAL),	CLK(CGENERAL3),
121 		CLK(MEMORY),	CLK(NONE),	CLK(OSC),	CLK(NONE),
122 		MASK_BITS_31_29},
123 	/* CLOCK_TYPE_MC2CC3P_A */
124 	{ CLK(MEMORY),	CLK(CGENERAL2),	CLK(CGENERAL),	CLK(CGENERAL3),
125 		CLK(PERIPH),	CLK(NONE),	CLK(AUDIO),	CLK(NONE),
126 		MASK_BITS_31_29},
127 	/* CLOCK_TYPE_M */
128 	{ CLK(MEMORY),		CLK(NONE),	CLK(NONE),	CLK(NONE),
129 		CLK(NONE),	CLK(NONE),	CLK(NONE),	CLK(NONE),
130 		MASK_BITS_31_30},
131 	/* CLOCK_TYPE_MCPTM2C2C3 */
132 	{ CLK(MEMORY),	CLK(CGENERAL),	CLK(PERIPH),	CLK(OSC),
133 		CLK(MEMORY2),	CLK(CGENERAL2),	CLK(CGENERAL3),	CLK(NONE),
134 		MASK_BITS_31_29},
135 	/* CLOCK_TYPE_PC2CC3T_S */
136 	{ CLK(PERIPH),	CLK(CGENERAL2),	CLK(CGENERAL),	CLK(CGENERAL3),
137 		CLK(OSC),	CLK(NONE),	CLK(SFROM32KHZ), CLK(NONE),
138 		MASK_BITS_31_29},
139 	/* CLOCK_TYPE_AC2CC3P_TS2 */
140 	{ CLK(AUDIO),	CLK(CGENERAL2),	CLK(CGENERAL),	CLK(CGENERAL3),
141 		CLK(PERIPH),	CLK(NONE),	CLK(OSC),	CLK(SRC2),
142 		MASK_BITS_31_29},
143 	/* CLOCK_TYPE_PC01C00_C42C41TC40 */
144 	{ CLK(PERIPH),	CLK(CGENERAL_1), CLK(CGENERAL_0), CLK(NONE),
145 		CLK(CGENERAL4_2), CLK(CGENERAL4_1), CLK(OSC), CLK(CGENERAL4_0),
146 		MASK_BITS_31_29},
147 };
148 
149 /*
150  * Clock type for each peripheral clock source. We put the name in each
151  * record just so it is easy to match things up
152  */
153 #define TYPE(name, type) type
154 static enum clock_type_id clock_periph_type[PERIPHC_COUNT] = {
155 	/* 0x00 */
156 	TYPE(PERIPHC_I2S2,	CLOCK_TYPE_AXPT),
157 	TYPE(PERIPHC_I2S3,	CLOCK_TYPE_AXPT),
158 	TYPE(PERIPHC_SPDIF_OUT,	CLOCK_TYPE_AXPT),
159 	TYPE(PERIPHC_SPDIF_IN,	CLOCK_TYPE_PC2CC3M),
160 	TYPE(PERIPHC_PWM,	CLOCK_TYPE_PC2CC3S_T),
161 	TYPE(PERIPHC_05h,	CLOCK_TYPE_NONE),
162 	TYPE(PERIPHC_SBC2,	CLOCK_TYPE_PC2CC3M_T),
163 	TYPE(PERIPHC_SBC3,	CLOCK_TYPE_PC2CC3M_T),
164 
165 	/* 0x08 */
166 	TYPE(PERIPHC_08h,	CLOCK_TYPE_NONE),
167 	TYPE(PERIPHC_I2C1,	CLOCK_TYPE_PC2CC3M_T16),
168 	TYPE(PERIPHC_I2C5,	CLOCK_TYPE_PC2CC3M_T16),
169 	TYPE(PERIPHC_0bh,	CLOCK_TYPE_NONE),
170 	TYPE(PERIPHC_0ch,	CLOCK_TYPE_NONE),
171 	TYPE(PERIPHC_SBC1,	CLOCK_TYPE_PC2CC3M_T),
172 	TYPE(PERIPHC_DISP1,	CLOCK_TYPE_PMDACD2T),
173 	TYPE(PERIPHC_DISP2,	CLOCK_TYPE_PMDACD2T),
174 
175 	/* 0x10 */
176 	TYPE(PERIPHC_10h,	CLOCK_TYPE_NONE),
177 	TYPE(PERIPHC_11h,	CLOCK_TYPE_NONE),
178 	TYPE(PERIPHC_VI,	CLOCK_TYPE_MC2CC3P_A),
179 	TYPE(PERIPHC_13h,	CLOCK_TYPE_NONE),
180 	TYPE(PERIPHC_SDMMC1,	CLOCK_TYPE_PC2CC3M_T),
181 	TYPE(PERIPHC_SDMMC2,	CLOCK_TYPE_PC2CC3M_T),
182 	TYPE(PERIPHC_16h,	CLOCK_TYPE_NONE),
183 	TYPE(PERIPHC_17h,	CLOCK_TYPE_NONE),
184 
185 	/* 0x18 */
186 	TYPE(PERIPHC_18h,	CLOCK_TYPE_NONE),
187 	TYPE(PERIPHC_SDMMC4,	CLOCK_TYPE_PC2CC3M_T),
188 	TYPE(PERIPHC_VFIR,	CLOCK_TYPE_PC2CC3M_T),
189 	TYPE(PERIPHC_1Bh,	CLOCK_TYPE_NONE),
190 	TYPE(PERIPHC_1Ch,	CLOCK_TYPE_NONE),
191 	TYPE(PERIPHC_HSI,	CLOCK_TYPE_PC2CC3M_T),
192 	TYPE(PERIPHC_UART1,	CLOCK_TYPE_PC2CC3M_T),
193 	TYPE(PERIPHC_UART2,	CLOCK_TYPE_PC2CC3M_T),
194 
195 	/* 0x20 */
196 	TYPE(PERIPHC_HOST1X,	CLOCK_TYPE_MC2CC3P_A),
197 	TYPE(PERIPHC_21h,	CLOCK_TYPE_NONE),
198 	TYPE(PERIPHC_22h,	CLOCK_TYPE_NONE),
199 	TYPE(PERIPHC_23h,	CLOCK_TYPE_NONE),
200 	TYPE(PERIPHC_24h,	CLOCK_TYPE_NONE),
201 	TYPE(PERIPHC_25h,	CLOCK_TYPE_NONE),
202 	TYPE(PERIPHC_I2C2,	CLOCK_TYPE_PC2CC3M_T16),
203 	TYPE(PERIPHC_EMC,	CLOCK_TYPE_MCPTM2C2C3),
204 
205 	/* 0x28 */
206 	TYPE(PERIPHC_UART3,	CLOCK_TYPE_PC2CC3M_T),
207 	TYPE(PERIPHC_29h,	CLOCK_TYPE_NONE),
208 	TYPE(PERIPHC_VI_SENSOR,	CLOCK_TYPE_MC2CC3P_A),
209 	TYPE(PERIPHC_2bh,	CLOCK_TYPE_NONE),
210 	TYPE(PERIPHC_2ch,	CLOCK_TYPE_NONE),
211 	TYPE(PERIPHC_SBC4,	CLOCK_TYPE_PC2CC3M_T),
212 	TYPE(PERIPHC_I2C3,	CLOCK_TYPE_PC2CC3M_T16),
213 	TYPE(PERIPHC_SDMMC3,	CLOCK_TYPE_PC2CC3M_T),
214 
215 	/* 0x30 */
216 	TYPE(PERIPHC_UART4,	CLOCK_TYPE_PC2CC3M_T),
217 	TYPE(PERIPHC_UART5,	CLOCK_TYPE_PC2CC3M_T),
218 	TYPE(PERIPHC_VDE,	CLOCK_TYPE_PC2CC3M_T),
219 	TYPE(PERIPHC_OWR,	CLOCK_TYPE_PC2CC3M_T),
220 	TYPE(PERIPHC_NOR,	CLOCK_TYPE_PC2CC3M_T),
221 	TYPE(PERIPHC_CSITE,	CLOCK_TYPE_PC2CC3M_T),
222 	TYPE(PERIPHC_I2S1,	CLOCK_TYPE_AXPT),
223 	TYPE(PERIPHC_DTV,	CLOCK_TYPE_NONE),
224 
225 	/* 0x38 */
226 	TYPE(PERIPHC_38h,	CLOCK_TYPE_NONE),
227 	TYPE(PERIPHC_39h,	CLOCK_TYPE_NONE),
228 	TYPE(PERIPHC_3ah,	CLOCK_TYPE_NONE),
229 	TYPE(PERIPHC_3bh,	CLOCK_TYPE_NONE),
230 	TYPE(PERIPHC_MSENC,	CLOCK_TYPE_MC2CC3P_A),
231 	TYPE(PERIPHC_TSEC,	CLOCK_TYPE_PC2CC3M_T),
232 	TYPE(PERIPHC_3eh,	CLOCK_TYPE_NONE),
233 	TYPE(PERIPHC_OSC,	CLOCK_TYPE_NONE),
234 
235 	/* 0x40 */
236 	TYPE(PERIPHC_40h,	CLOCK_TYPE_NONE),	/* start with 0x3b0 */
237 	TYPE(PERIPHC_MSELECT,	CLOCK_TYPE_PC2CC3M_T),
238 	TYPE(PERIPHC_TSENSOR,	CLOCK_TYPE_PC2CC3T_S),
239 	TYPE(PERIPHC_I2S4,	CLOCK_TYPE_AXPT),
240 	TYPE(PERIPHC_I2S5,	CLOCK_TYPE_AXPT),
241 	TYPE(PERIPHC_I2C4,	CLOCK_TYPE_PC2CC3M_T16),
242 	TYPE(PERIPHC_SBC5,	CLOCK_TYPE_PC2CC3M_T),
243 	TYPE(PERIPHC_SBC6,	CLOCK_TYPE_PC2CC3M_T),
244 
245 	/* 0x48 */
246 	TYPE(PERIPHC_AUDIO,	CLOCK_TYPE_AC2CC3P_TS2),
247 	TYPE(PERIPHC_49h,	CLOCK_TYPE_NONE),
248 	TYPE(PERIPHC_4ah,	CLOCK_TYPE_NONE),
249 	TYPE(PERIPHC_4bh,	CLOCK_TYPE_NONE),
250 	TYPE(PERIPHC_4ch,	CLOCK_TYPE_NONE),
251 	TYPE(PERIPHC_HDA2CODEC2X, CLOCK_TYPE_PC2CC3M_T),
252 	TYPE(PERIPHC_ACTMON,	CLOCK_TYPE_PC2CC3S_T),
253 	TYPE(PERIPHC_EXTPERIPH1, CLOCK_TYPE_ASPTE),
254 
255 	/* 0x50 */
256 	TYPE(PERIPHC_EXTPERIPH2, CLOCK_TYPE_ASPTE),
257 	TYPE(PERIPHC_EXTPERIPH3, CLOCK_TYPE_ASPTE),
258 	TYPE(PERIPHC_52h,	CLOCK_TYPE_NONE),
259 	TYPE(PERIPHC_I2CSLOW,	CLOCK_TYPE_PC2CC3S_T),
260 	TYPE(PERIPHC_SYS,	CLOCK_TYPE_NONE),
261 	TYPE(PERIPHC_55h,	CLOCK_TYPE_NONE),
262 	TYPE(PERIPHC_56h,	CLOCK_TYPE_NONE),
263 	TYPE(PERIPHC_57h,	CLOCK_TYPE_NONE),
264 
265 	/* 0x58 */
266 	TYPE(PERIPHC_58h,	CLOCK_TYPE_NONE),
267 	TYPE(PERIPHC_59h,	CLOCK_TYPE_NONE),
268 	TYPE(PERIPHC_5ah,	CLOCK_TYPE_NONE),
269 	TYPE(PERIPHC_5bh,	CLOCK_TYPE_NONE),
270 	TYPE(PERIPHC_SATAOOB,	CLOCK_TYPE_PCMT),
271 	TYPE(PERIPHC_SATA,	CLOCK_TYPE_PCMT),
272 	TYPE(PERIPHC_HDA,	CLOCK_TYPE_PC2CC3M_T),
273 	TYPE(PERIPHC_5fh,	CLOCK_TYPE_NONE),
274 
275 	/* 0x60 */
276 	TYPE(PERIPHC_XUSB_CORE_HOST, CLOCK_TYPE_NONE),
277 	TYPE(PERIPHC_XUSB_FALCON, CLOCK_TYPE_NONE),
278 	TYPE(PERIPHC_XUSB_FS,	CLOCK_TYPE_NONE),
279 	TYPE(PERIPHC_XUSB_CORE_DEV, CLOCK_TYPE_NONE),
280 	TYPE(PERIPHC_XUSB_SS,	CLOCK_TYPE_NONE),
281 	TYPE(PERIPHC_CILAB,	CLOCK_TYPE_NONE),
282 	TYPE(PERIPHC_CILCD,	CLOCK_TYPE_NONE),
283 	TYPE(PERIPHC_CILE,	CLOCK_TYPE_NONE),
284 
285 	/* 0x68 */
286 	TYPE(PERIPHC_DSIA_LP,	CLOCK_TYPE_NONE),
287 	TYPE(PERIPHC_DSIB_LP,	CLOCK_TYPE_NONE),
288 	TYPE(PERIPHC_ENTROPY,	CLOCK_TYPE_NONE),
289 	TYPE(PERIPHC_DVFS_REF,	CLOCK_TYPE_NONE),
290 	TYPE(PERIPHC_DVFS_SOC,	CLOCK_TYPE_NONE),
291 	TYPE(PERIPHC_TRACECLKIN, CLOCK_TYPE_NONE),
292 	TYPE(PERIPHC_6eh,	CLOCK_TYPE_NONE),
293 	TYPE(PERIPHC_6fh,	CLOCK_TYPE_NONE),
294 
295 	/* 0x70 */
296 	TYPE(PERIPHC_EMC_LATENCY, CLOCK_TYPE_NONE),
297 	TYPE(PERIPHC_SOC_THERM,	CLOCK_TYPE_NONE),
298 	TYPE(PERIPHC_72h,	CLOCK_TYPE_NONE),
299 	TYPE(PERIPHC_73h,	CLOCK_TYPE_NONE),
300 	TYPE(PERIPHC_74h,	CLOCK_TYPE_NONE),
301 	TYPE(PERIPHC_75h,	CLOCK_TYPE_NONE),
302 	TYPE(PERIPHC_VI_SENSOR2, CLOCK_TYPE_NONE),
303 	TYPE(PERIPHC_I2C6,	CLOCK_TYPE_PC2CC3M_T16),
304 
305 	/* 0x78 */
306 	TYPE(PERIPHC_78h,	CLOCK_TYPE_NONE),
307 	TYPE(PERIPHC_EMC_DLL,	CLOCK_TYPE_MCPTM2C2C3),
308 	TYPE(PERIPHC_7ah,	CLOCK_TYPE_NONE),
309 	TYPE(PERIPHC_CLK72MHZ,	CLOCK_TYPE_NONE),
310 	TYPE(PERIPHC_7ch,	CLOCK_TYPE_NONE),
311 	TYPE(PERIPHC_7dh,	CLOCK_TYPE_NONE),
312 	TYPE(PERIPHC_VIC,	CLOCK_TYPE_NONE),
313 	TYPE(PERIPHC_7Fh,	CLOCK_TYPE_NONE),
314 
315 	/* 0x80 */
316 	TYPE(PERIPHC_SDMMC_LEGACY_TM,	CLOCK_TYPE_NONE),
317 	TYPE(PERIPHC_NVDEC,	CLOCK_TYPE_NONE),
318 	TYPE(PERIPHC_NVJPG,	CLOCK_TYPE_NONE),
319 	TYPE(PERIPHC_NVENC,	CLOCK_TYPE_NONE),
320 	TYPE(PERIPHC_84h,	CLOCK_TYPE_NONE),
321 	TYPE(PERIPHC_85h,	CLOCK_TYPE_NONE),
322 	TYPE(PERIPHC_86h,	CLOCK_TYPE_NONE),
323 	TYPE(PERIPHC_87h,	CLOCK_TYPE_NONE),
324 
325 	/* 0x88 */
326 	TYPE(PERIPHC_88h,	CLOCK_TYPE_NONE),
327 	TYPE(PERIPHC_89h,	CLOCK_TYPE_NONE),
328 	TYPE(PERIPHC_DMIC3,	CLOCK_TYPE_NONE),
329 	TYPE(PERIPHC_APE,	CLOCK_TYPE_NONE),
330 	TYPE(PERIPHC_QSPI,	CLOCK_TYPE_PC01C00_C42C41TC40),
331 	TYPE(PERIPHC_VI_I2C,	CLOCK_TYPE_NONE),
332 	TYPE(PERIPHC_USB2_HSIC_TRK, CLOCK_TYPE_NONE),
333 	TYPE(PERIPHC_PEX_SATA_USB_RX_BYP, CLOCK_TYPE_NONE),
334 
335 	/* 0x90 */
336 	TYPE(PERIPHC_MAUD,	CLOCK_TYPE_NONE),
337 	TYPE(PERIPHC_TSECB,	CLOCK_TYPE_NONE),
338 };
339 
340 /*
341  * This array translates a periph_id to a periphc_internal_id
342  *
343  * Not present/matched up:
344  *	uint vi_sensor;	 _VI_SENSOR_0,		0x1A8
345  *	SPDIF - which is both 0x08 and 0x0c
346  *
347  */
348 #define NONE(name) (-1)
349 #define OFFSET(name, value) PERIPHC_ ## name
350 #define INTERNAL_ID(id) (id & 0x000000ff)
351 static s8 periph_id_to_internal_id[PERIPH_ID_COUNT] = {
352 	/* Low word: 31:0 */
353 	NONE(CPU),
354 	NONE(COP),
355 	NONE(TRIGSYS),
356 	NONE(ISPB),
357 	NONE(RESERVED4),
358 	NONE(TMR),
359 	PERIPHC_UART1,
360 	PERIPHC_UART2,	/* and vfir 0x68 */
361 
362 	/* 8 */
363 	NONE(GPIO),
364 	PERIPHC_SDMMC2,
365 	PERIPHC_SPDIF_IN,
366 	PERIPHC_I2S2,
367 	PERIPHC_I2C1,
368 	NONE(RESERVED13),
369 	PERIPHC_SDMMC1,
370 	PERIPHC_SDMMC4,
371 
372 	/* 16 */
373 	NONE(TCW),
374 	PERIPHC_PWM,
375 	PERIPHC_I2S3,
376 	NONE(RESERVED19),
377 	PERIPHC_VI,
378 	NONE(RESERVED21),
379 	NONE(USBD),
380 	NONE(ISP),
381 
382 	/* 24 */
383 	NONE(RESERVED24),
384 	NONE(RESERVED25),
385 	PERIPHC_DISP2,
386 	PERIPHC_DISP1,
387 	PERIPHC_HOST1X,
388 	NONE(VCP),
389 	PERIPHC_I2S1,
390 	NONE(CACHE2),
391 
392 	/* Middle word: 63:32 */
393 	NONE(MEM),
394 	NONE(AHBDMA),
395 	NONE(APBDMA),
396 	NONE(RESERVED35),
397 	NONE(RESERVED36),
398 	NONE(STAT_MON),
399 	NONE(RESERVED38),
400 	NONE(FUSE),
401 
402 	/* 40 */
403 	NONE(KFUSE),
404 	PERIPHC_SBC1,		/* SBCx = SPIx */
405 	PERIPHC_NOR,
406 	NONE(RESERVED43),
407 	PERIPHC_SBC2,
408 	NONE(XIO),
409 	PERIPHC_SBC3,
410 	PERIPHC_I2C5,
411 
412 	/* 48 */
413 	NONE(DSI),
414 	NONE(RESERVED49),
415 	PERIPHC_HSI,
416 	NONE(RESERVED51),
417 	NONE(CSI),
418 	NONE(RESERVED53),
419 	PERIPHC_I2C2,
420 	PERIPHC_UART3,
421 
422 	/* 56 */
423 	NONE(MIPI_CAL),
424 	PERIPHC_EMC,
425 	NONE(USB2),
426 	NONE(USB3),
427 	NONE(RESERVED60),
428 	PERIPHC_VDE,
429 	NONE(BSEA),
430 	NONE(BSEV),
431 
432 	/* Upper word 95:64 */
433 	NONE(RESERVED64),
434 	PERIPHC_UART4,
435 	PERIPHC_UART5,
436 	PERIPHC_I2C3,
437 	PERIPHC_SBC4,
438 	PERIPHC_SDMMC3,
439 	NONE(PCIE),
440 	PERIPHC_OWR,
441 
442 	/* 72 */
443 	NONE(AFI),
444 	PERIPHC_CSITE,
445 	NONE(PCIEXCLK),
446 	NONE(AVPUCQ),
447 	NONE(LA),
448 	NONE(TRACECLKIN),
449 	NONE(SOC_THERM),
450 	NONE(DTV),
451 
452 	/* 80 */
453 	NONE(RESERVED80),
454 	PERIPHC_I2CSLOW,
455 	NONE(DSIB),
456 	PERIPHC_TSEC,
457 	NONE(RESERVED84),
458 	NONE(RESERVED85),
459 	NONE(RESERVED86),
460 	NONE(EMUCIF),
461 
462 	/* 88 */
463 	NONE(RESERVED88),
464 	NONE(XUSB_HOST),
465 	NONE(RESERVED90),
466 	PERIPHC_MSENC,
467 	NONE(RESERVED92),
468 	NONE(RESERVED93),
469 	NONE(RESERVED94),
470 	NONE(XUSB_DEV),
471 
472 	/* V word: 31:0 */
473 	NONE(CPUG),
474 	NONE(CPULP),
475 	NONE(V_RESERVED2),
476 	PERIPHC_MSELECT,
477 	NONE(V_RESERVED4),
478 	PERIPHC_I2S4,
479 	PERIPHC_I2S5,
480 	PERIPHC_I2C4,
481 
482 	/* 104 */
483 	PERIPHC_SBC5,
484 	PERIPHC_SBC6,
485 	PERIPHC_AUDIO,
486 	NONE(APBIF),
487 	NONE(V_RESERVED12),
488 	NONE(V_RESERVED13),
489 	NONE(V_RESERVED14),
490 	PERIPHC_HDA2CODEC2X,
491 
492 	/* 112 */
493 	NONE(ATOMICS),
494 	NONE(V_RESERVED17),
495 	NONE(V_RESERVED18),
496 	NONE(V_RESERVED19),
497 	NONE(V_RESERVED20),
498 	NONE(V_RESERVED21),
499 	NONE(V_RESERVED22),
500 	PERIPHC_ACTMON,
501 
502 	/* 120 */
503 	NONE(EXTPERIPH1),
504 	NONE(EXTPERIPH2),
505 	NONE(EXTPERIPH3),
506 	NONE(OOB),
507 	PERIPHC_SATA,
508 	PERIPHC_HDA,
509 	NONE(TZRAM),
510 	NONE(SE),
511 
512 	/* W word: 31:0 */
513 	NONE(HDA2HDMICODEC),
514 	NONE(SATACOLD),
515 	NONE(W_RESERVED2),
516 	NONE(W_RESERVED3),
517 	NONE(W_RESERVED4),
518 	NONE(W_RESERVED5),
519 	NONE(W_RESERVED6),
520 	NONE(W_RESERVED7),
521 
522 	/* 136 */
523 	NONE(CEC),
524 	NONE(W_RESERVED9),
525 	NONE(W_RESERVED10),
526 	NONE(W_RESERVED11),
527 	NONE(W_RESERVED12),
528 	NONE(W_RESERVED13),
529 	NONE(XUSB_PADCTL),
530 	NONE(W_RESERVED15),
531 
532 	/* 144 */
533 	NONE(W_RESERVED16),
534 	NONE(W_RESERVED17),
535 	NONE(W_RESERVED18),
536 	NONE(W_RESERVED19),
537 	NONE(W_RESERVED20),
538 	NONE(ENTROPY),
539 	NONE(DDS),
540 	NONE(W_RESERVED23),
541 
542 	/* 152 */
543 	NONE(W_RESERVED24),
544 	NONE(W_RESERVED25),
545 	NONE(W_RESERVED26),
546 	NONE(DVFS),
547 	NONE(XUSB_SS),
548 	NONE(W_RESERVED29),
549 	NONE(W_RESERVED30),
550 	NONE(W_RESERVED31),
551 
552 	/* X word: 31:0 */
553 	NONE(SPARE),
554 	NONE(X_RESERVED1),
555 	NONE(X_RESERVED2),
556 	NONE(X_RESERVED3),
557 	NONE(CAM_MCLK),
558 	NONE(CAM_MCLK2),
559 	PERIPHC_I2C6,
560 	NONE(X_RESERVED7),
561 
562 	/* 168 */
563 	NONE(X_RESERVED8),
564 	NONE(X_RESERVED9),
565 	NONE(X_RESERVED10),
566 	NONE(VIM2_CLK),
567 	NONE(X_RESERVED12),
568 	NONE(X_RESERVED13),
569 	NONE(EMC_DLL),
570 	NONE(X_RESERVED15),
571 
572 	/* 176 */
573 	NONE(X_RESERVED16),
574 	NONE(CLK72MHZ),
575 	NONE(VIC),
576 	NONE(X_RESERVED19),
577 	NONE(X_RESERVED20),
578 	NONE(DPAUX),
579 	NONE(SOR0),
580 	NONE(X_RESERVED23),
581 
582 	/* 184 */
583 	NONE(GPU),
584 	NONE(X_RESERVED25),
585 	NONE(X_RESERVED26),
586 	NONE(X_RESERVED27),
587 	NONE(X_RESERVED28),
588 	NONE(X_RESERVED29),
589 	NONE(X_RESERVED30),
590 	NONE(X_RESERVED31),
591 
592 	/* Y: 192 (192 - 223) */
593 	NONE(Y_RESERVED0),
594 	PERIPHC_SDMMC_LEGACY_TM,
595 	PERIPHC_NVDEC,
596 	PERIPHC_NVJPG,
597 	NONE(Y_RESERVED4),
598 	PERIPHC_DMIC3,		/* 197 */
599 	PERIPHC_APE,		/* 198 */
600 	NONE(Y_RESERVED7),
601 
602 	/* 200 */
603 	NONE(Y_RESERVED8),
604 	NONE(Y_RESERVED9),
605 	NONE(Y_RESERVED10),
606 	NONE(Y_RESERVED11),
607 	NONE(Y_RESERVED12),
608 	NONE(Y_RESERVED13),
609 	NONE(Y_RESERVED14),
610 	NONE(Y_RESERVED15),
611 
612 	/* 208 */
613 	PERIPHC_VI_I2C,		/* 208 */
614 	NONE(Y_RESERVED17),
615 	NONE(Y_RESERVED18),
616 	PERIPHC_QSPI,		/* 211 */
617 	NONE(Y_RESERVED20),
618 	NONE(Y_RESERVED21),
619 	NONE(Y_RESERVED22),
620 	NONE(Y_RESERVED23),
621 
622 	/* 216 */
623 	NONE(Y_RESERVED24),
624 	NONE(Y_RESERVED25),
625 	NONE(Y_RESERVED26),
626 	PERIPHC_NVENC,		/* 219 */
627 	NONE(Y_RESERVED28),
628 	NONE(Y_RESERVED29),
629 	NONE(Y_RESERVED30),
630 	NONE(Y_RESERVED31),
631 };
632 
633 /*
634  * Get the oscillator frequency, from the corresponding hardware configuration
635  * field. Note that Tegra30+ support 3 new higher freqs, but we map back
636  * to the old T20 freqs. Support for the higher oscillators is TBD.
637  */
638 enum clock_osc_freq clock_get_osc_freq(void)
639 {
640 	struct clk_rst_ctlr *clkrst =
641 			(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
642 	u32 reg;
643 
644 	reg = readl(&clkrst->crc_osc_ctrl);
645 	reg = (reg & OSC_FREQ_MASK) >> OSC_FREQ_SHIFT;
646 	/*
647 	 * 0 = 13MHz, 1 = 16.8MHz, 4 = 19.2MHz, 5 = 38.4MHz,
648 	 * 8 = 12MHz, 9 = 48MHz,  12 = 26MHz
649 	 */
650 	if (reg == 5) {
651 		debug("OSC_FREQ is 38.4MHz (%d) ...\n", reg);
652 		/* Map it to 19.2MHz for now. 38.4MHz OSC support TBD */
653 		return 1;
654 	}
655 
656 	/*
657 	 * Map to most common (T20) freqs (except 38.4, handled above):
658 	 *  13/16.8 = 0, 19.2 = 1, 12/48 = 2, 26 = 3
659 	 */
660 	return reg >> 2;
661 }
662 
663 /* Returns a pointer to the clock source register for a peripheral */
664 u32 *get_periph_source_reg(enum periph_id periph_id)
665 {
666 	struct clk_rst_ctlr *clkrst =
667 		(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
668 	enum periphc_internal_id internal_id;
669 
670 	/* Coresight is a special case */
671 	if (periph_id == PERIPH_ID_CSI)
672 		return &clkrst->crc_clk_src[PERIPH_ID_CSI+1];
673 
674 	assert(periph_id >= PERIPH_ID_FIRST && periph_id < PERIPH_ID_COUNT);
675 	internal_id = INTERNAL_ID(periph_id_to_internal_id[periph_id]);
676 	assert(internal_id != -1);
677 
678 	if (internal_id < PERIPHC_VW_FIRST)
679 		/* L, H, U */
680 		return &clkrst->crc_clk_src[internal_id];
681 
682 	if (internal_id < PERIPHC_X_FIRST) {
683 		/* VW */
684 		internal_id -= PERIPHC_VW_FIRST;
685 		return &clkrst->crc_clk_src_vw[internal_id];
686 	}
687 
688 	if (internal_id < PERIPHC_Y_FIRST) {
689 		/* X */
690 		internal_id -= PERIPHC_X_FIRST;
691 		return &clkrst->crc_clk_src_x[internal_id];
692 	}
693 
694 	/* Y */
695 	internal_id -= PERIPHC_Y_FIRST;
696 	return &clkrst->crc_clk_src_y[internal_id];
697 }
698 
699 /**
700  * Given a peripheral ID and the required source clock, this returns which
701  * value should be programmed into the source mux for that peripheral.
702  *
703  * There is special code here to handle the one source type with 5 sources.
704  *
705  * @param periph_id	peripheral to start
706  * @param source	PLL id of required parent clock
707  * @param mux_bits	Set to number of bits in mux register: 2 or 4
708  * @param divider_bits Set to number of divider bits (8 or 16)
709  * @return mux value (0-4, or -1 if not found)
710  */
711 int get_periph_clock_source(enum periph_id periph_id,
712 	enum clock_id parent, int *mux_bits, int *divider_bits)
713 {
714 	enum clock_type_id type;
715 	enum periphc_internal_id internal_id;
716 	int mux;
717 
718 	assert(clock_periph_id_isvalid(periph_id));
719 
720 	internal_id = INTERNAL_ID(periph_id_to_internal_id[periph_id]);
721 	assert(periphc_internal_id_isvalid(internal_id));
722 
723 	type = clock_periph_type[internal_id];
724 	assert(clock_type_id_isvalid(type));
725 
726 	*mux_bits = clock_source[type][CLOCK_MAX_MUX];
727 
728 	if (type == CLOCK_TYPE_PC2CC3M_T16)
729 		*divider_bits = 16;
730 	else
731 		*divider_bits = 8;
732 
733 	for (mux = 0; mux < CLOCK_MAX_MUX; mux++)
734 		if (clock_source[type][mux] == parent)
735 			return mux;
736 
737 	/* if we get here, either us or the caller has made a mistake */
738 	printf("Caller requested bad clock: periph=%d, parent=%d\n", periph_id,
739 	       parent);
740 	return -1;
741 }
742 
743 void clock_set_enable(enum periph_id periph_id, int enable)
744 {
745 	struct clk_rst_ctlr *clkrst =
746 		(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
747 	u32 *clk;
748 	u32 reg;
749 
750 	/* Enable/disable the clock to this peripheral */
751 	assert(clock_periph_id_isvalid(periph_id));
752 	if ((int)periph_id < (int)PERIPH_ID_VW_FIRST)
753 		clk = &clkrst->crc_clk_out_enb[PERIPH_REG(periph_id)];
754 	else if ((int)periph_id < (int)PERIPH_ID_X_FIRST)
755 		clk = &clkrst->crc_clk_out_enb_vw[PERIPH_REG(periph_id)];
756 	else if ((int)periph_id < (int)PERIPH_ID_Y_FIRST)
757 		clk = &clkrst->crc_clk_out_enb_x;
758 	else
759 		clk = &clkrst->crc_clk_out_enb_y;
760 
761 	reg = readl(clk);
762 	if (enable)
763 		reg |= PERIPH_MASK(periph_id);
764 	else
765 		reg &= ~PERIPH_MASK(periph_id);
766 	writel(reg, clk);
767 }
768 
769 void reset_set_enable(enum periph_id periph_id, int enable)
770 {
771 	struct clk_rst_ctlr *clkrst =
772 		(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
773 	u32 *reset;
774 	u32 reg;
775 
776 	/* Enable/disable reset to the peripheral */
777 	assert(clock_periph_id_isvalid(periph_id));
778 	if (periph_id < PERIPH_ID_VW_FIRST)
779 		reset = &clkrst->crc_rst_dev[PERIPH_REG(periph_id)];
780 	else if ((int)periph_id < (int)PERIPH_ID_X_FIRST)
781 		reset = &clkrst->crc_rst_dev_vw[PERIPH_REG(periph_id)];
782 	else if ((int)periph_id < (int)PERIPH_ID_Y_FIRST)
783 		reset = &clkrst->crc_rst_devices_x;
784 	else
785 		reset = &clkrst->crc_rst_devices_y;
786 
787 	reg = readl(reset);
788 	if (enable)
789 		reg |= PERIPH_MASK(periph_id);
790 	else
791 		reg &= ~PERIPH_MASK(periph_id);
792 	writel(reg, reset);
793 }
794 
795 #ifdef CONFIG_OF_CONTROL
796 /*
797  * Convert a device tree clock ID to our peripheral ID. They are mostly
798  * the same but we are very cautious so we check that a valid clock ID is
799  * provided.
800  *
801  * @param clk_id    Clock ID according to tegra210 device tree binding
802  * @return peripheral ID, or PERIPH_ID_NONE if the clock ID is invalid
803  */
804 enum periph_id clk_id_to_periph_id(int clk_id)
805 {
806 	if (clk_id > PERIPH_ID_COUNT)
807 		return PERIPH_ID_NONE;
808 
809 	switch (clk_id) {
810 	case PERIPH_ID_RESERVED4:
811 	case PERIPH_ID_RESERVED25:
812 	case PERIPH_ID_RESERVED35:
813 	case PERIPH_ID_RESERVED36:
814 	case PERIPH_ID_RESERVED38:
815 	case PERIPH_ID_RESERVED43:
816 	case PERIPH_ID_RESERVED49:
817 	case PERIPH_ID_RESERVED53:
818 	case PERIPH_ID_RESERVED64:
819 	case PERIPH_ID_RESERVED84:
820 	case PERIPH_ID_RESERVED85:
821 	case PERIPH_ID_RESERVED86:
822 	case PERIPH_ID_RESERVED88:
823 	case PERIPH_ID_RESERVED90:
824 	case PERIPH_ID_RESERVED92:
825 	case PERIPH_ID_RESERVED93:
826 	case PERIPH_ID_RESERVED94:
827 	case PERIPH_ID_V_RESERVED2:
828 	case PERIPH_ID_V_RESERVED4:
829 	case PERIPH_ID_V_RESERVED17:
830 	case PERIPH_ID_V_RESERVED18:
831 	case PERIPH_ID_V_RESERVED19:
832 	case PERIPH_ID_V_RESERVED20:
833 	case PERIPH_ID_V_RESERVED21:
834 	case PERIPH_ID_V_RESERVED22:
835 	case PERIPH_ID_W_RESERVED2:
836 	case PERIPH_ID_W_RESERVED3:
837 	case PERIPH_ID_W_RESERVED4:
838 	case PERIPH_ID_W_RESERVED5:
839 	case PERIPH_ID_W_RESERVED6:
840 	case PERIPH_ID_W_RESERVED7:
841 	case PERIPH_ID_W_RESERVED9:
842 	case PERIPH_ID_W_RESERVED10:
843 	case PERIPH_ID_W_RESERVED11:
844 	case PERIPH_ID_W_RESERVED12:
845 	case PERIPH_ID_W_RESERVED13:
846 	case PERIPH_ID_W_RESERVED15:
847 	case PERIPH_ID_W_RESERVED16:
848 	case PERIPH_ID_W_RESERVED17:
849 	case PERIPH_ID_W_RESERVED18:
850 	case PERIPH_ID_W_RESERVED19:
851 	case PERIPH_ID_W_RESERVED20:
852 	case PERIPH_ID_W_RESERVED23:
853 	case PERIPH_ID_W_RESERVED29:
854 	case PERIPH_ID_W_RESERVED30:
855 	case PERIPH_ID_W_RESERVED31:
856 		return PERIPH_ID_NONE;
857 	default:
858 		return clk_id;
859 	}
860 }
861 #endif /* CONFIG_OF_CONTROL */
862 
863 /*
864  * T210 redefines PLLP_OUT2 as PLLP_VCO/DIVP, so do different OUT1-4 setup here.
865  * PLLP_BASE/MISC/etc. is already set up for 408MHz in the BootROM.
866  */
867 void tegra210_setup_pllp(void)
868 {
869 	struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
870 	u32 reg;
871 
872 	/* Set PLLP_OUT1, 3 & 4 freqs to 9.6, 102 & 204MHz */
873 
874 	/* OUT1 */
875 	/* Assert RSTN before enable */
876 	reg = PLLP_OUT1_RSTN_EN;
877 	writel(reg, &clkrst->crc_pll[CLOCK_ID_PERIPH].pll_out[0]);
878 	/* Set divisor and reenable */
879 	reg = (IN_408_OUT_9_6_DIVISOR << PLLP_OUT1_RATIO)
880 		| PLLP_OUT1_OVR | PLLP_OUT1_CLKEN | PLLP_OUT1_RSTN_DIS;
881 	writel(reg, &clkrst->crc_pll[CLOCK_ID_PERIPH].pll_out[0]);
882 
883 	/* OUT3, 4 */
884 	/* Assert RSTN before enable */
885 	reg = PLLP_OUT4_RSTN_EN | PLLP_OUT3_RSTN_EN;
886 	writel(reg, &clkrst->crc_pll[CLOCK_ID_PERIPH].pll_out[1]);
887 	/* Set divisor and reenable */
888 	reg = (IN_408_OUT_204_DIVISOR << PLLP_OUT4_RATIO)
889 		| PLLP_OUT4_OVR | PLLP_OUT4_CLKEN | PLLP_OUT4_RSTN_DIS
890 		| (IN_408_OUT_102_DIVISOR << PLLP_OUT3_RATIO)
891 		| PLLP_OUT3_OVR | PLLP_OUT3_CLKEN | PLLP_OUT3_RSTN_DIS;
892 	writel(reg, &clkrst->crc_pll[CLOCK_ID_PERIPH].pll_out[1]);
893 
894 	/*
895 	 * NOTE: If you want to change PLLP_OUT2 away from 204MHz,
896 	 * you can change PLLP_BASE DIVP here. Currently defaults
897 	 * to 1, which is 2^1, or 2, so PLLP_OUT2 is 204MHz.
898 	 * See Table 13 in section 5.1.4 in T210 TRM for more info.
899 	 */
900 }
901 
902 void clock_early_init(void)
903 {
904 	struct clk_rst_ctlr *clkrst =
905 		(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
906 	u32 data;
907 
908 	tegra210_setup_pllp();
909 
910 	/*
911 	 * PLLC output frequency set to 600Mhz
912 	 * PLLD output frequency set to 925Mhz
913 	 */
914 	switch (clock_get_osc_freq()) {
915 	case CLOCK_OSC_FREQ_12_0: /* OSC is 12Mhz */
916 		clock_set_rate(CLOCK_ID_CGENERAL, 600, 12, 0, 8);
917 		clock_set_rate(CLOCK_ID_DISPLAY, 925, 12, 0, 12);
918 		break;
919 
920 	case CLOCK_OSC_FREQ_26_0: /* OSC is 26Mhz */
921 		clock_set_rate(CLOCK_ID_CGENERAL, 600, 26, 0, 8);
922 		clock_set_rate(CLOCK_ID_DISPLAY, 925, 26, 0, 12);
923 		break;
924 
925 	case CLOCK_OSC_FREQ_13_0: /* OSC is 13Mhz */
926 		clock_set_rate(CLOCK_ID_CGENERAL, 600, 13, 0, 8);
927 		clock_set_rate(CLOCK_ID_DISPLAY, 925, 13, 0, 12);
928 		break;
929 	case CLOCK_OSC_FREQ_19_2:
930 		clock_set_rate(CLOCK_ID_CGENERAL, 125, 4, 0, 0);
931 		clock_set_rate(CLOCK_ID_DISPLAY, 96, 2, 0, 12);
932 		break;
933 	default:
934 		/*
935 		 * These are not supported. It is too early to print a
936 		 * message and the UART likely won't work anyway due to the
937 		 * oscillator being wrong.
938 		 */
939 		break;
940 	}
941 
942 	/* PLLC_MISC1: Turn IDDQ off. NOTE: T210 PLLC_MISC_1 maps to pll_misc */
943 	clrbits_le32(&clkrst->crc_pll[CLOCK_ID_CGENERAL].pll_misc,
944 		     (1 << PLLC_IDDQ));
945 	udelay(2);
946 
947 	/*
948 	 * PLLC_MISC: Take PLLC out of reset. NOTE: T210 PLLC_MISC maps
949 	 * to pll_out[1]
950 	 */
951 	clrbits_le32(&clkrst->crc_pll[CLOCK_ID_CGENERAL].pll_out[1],
952 		     (1 << PLLC_RESET));
953 	udelay(2);
954 
955 	/* PLLD_MISC: Set CLKENABLE and LOCK_DETECT bits */
956 	data = (1 << PLLD_ENABLE_CLK) | (1 << PLLD_EN_LCKDET);
957 	writel(data, &clkrst->crc_pll[CLOCK_ID_DISPLAY].pll_misc);
958 	udelay(2);
959 }
960 
961 void arch_timer_init(void)
962 {
963 	struct sysctr_ctlr *sysctr = (struct sysctr_ctlr *)NV_PA_TSC_BASE;
964 	u32 freq, val;
965 
966 	freq = clock_get_rate(CLOCK_ID_OSC);
967 	debug("%s: osc freq is %dHz [0x%08X]\n", __func__, freq, freq);
968 
969 	/* ARM CNTFRQ */
970 #ifndef CONFIG_ARM64
971 	asm("mcr p15, 0, %0, c14, c0, 0\n" : : "r" (freq));
972 #endif
973 
974 	/* Only Tegra114+ has the System Counter regs */
975 	debug("%s: setting CNTFID0 to 0x%08X\n", __func__, freq);
976 	writel(freq, &sysctr->cntfid0);
977 
978 	val = readl(&sysctr->cntcr);
979 	val |= TSC_CNTCR_ENABLE | TSC_CNTCR_HDBG;
980 	writel(val, &sysctr->cntcr);
981 	debug("%s: TSC CNTCR = 0x%08X\n", __func__, val);
982 }
983 
984 #define PLLE_SS_CNTL 0x68
985 #define  PLLE_SS_CNTL_SSCINCINTR(x) (((x) & 0x3f) << 24)
986 #define  PLLE_SS_CNTL_SSCINC(x) (((x) & 0xff) << 16)
987 #define  PLLE_SS_CNTL_SSCINVERT (1 << 15)
988 #define  PLLE_SS_CNTL_SSCCENTER (1 << 14)
989 #define  PLLE_SS_CNTL_SSCBYP (1 << 12)
990 #define  PLLE_SS_CNTL_INTERP_RESET (1 << 11)
991 #define  PLLE_SS_CNTL_BYPASS_SS (1 << 10)
992 #define  PLLE_SS_CNTL_SSCMAX(x) (((x) & 0x1ff) << 0)
993 
994 #define PLLE_BASE 0x0e8
995 #define  PLLE_BASE_ENABLE (1 << 30)
996 #define  PLLE_BASE_LOCK_OVERRIDE (1 << 29)
997 #define  PLLE_BASE_PLDIV_CML(x) (((x) & 0xf) << 24)
998 #define  PLLE_BASE_NDIV(x) (((x) & 0xff) << 8)
999 #define  PLLE_BASE_MDIV(x) (((x) & 0xff) << 0)
1000 
1001 #define PLLE_MISC 0x0ec
1002 #define  PLLE_MISC_IDDQ_SWCTL (1 << 14)
1003 #define  PLLE_MISC_IDDQ_OVERRIDE (1 << 13)
1004 #define  PLLE_MISC_LOCK_ENABLE (1 << 9)
1005 #define  PLLE_MISC_PTS (1 << 8)
1006 #define  PLLE_MISC_VREG_BG_CTRL(x) (((x) & 0x3) << 4)
1007 #define  PLLE_MISC_VREG_CTRL(x) (((x) & 0x3) << 2)
1008 
1009 #define PLLE_AUX 0x48c
1010 #define  PLLE_AUX_SEQ_ENABLE (1 << 24)
1011 #define  PLLE_AUX_ENABLE_SWCTL (1 << 4)
1012 
1013 int tegra_plle_enable(void)
1014 {
1015 	unsigned int m = 1, n = 200, cpcon = 13;
1016 	u32 value;
1017 
1018 	value = readl(NV_PA_CLK_RST_BASE + PLLE_BASE);
1019 	value &= ~PLLE_BASE_LOCK_OVERRIDE;
1020 	writel(value, NV_PA_CLK_RST_BASE + PLLE_BASE);
1021 
1022 	value = readl(NV_PA_CLK_RST_BASE + PLLE_AUX);
1023 	value |= PLLE_AUX_ENABLE_SWCTL;
1024 	value &= ~PLLE_AUX_SEQ_ENABLE;
1025 	writel(value, NV_PA_CLK_RST_BASE + PLLE_AUX);
1026 
1027 	udelay(1);
1028 
1029 	value = readl(NV_PA_CLK_RST_BASE + PLLE_MISC);
1030 	value |= PLLE_MISC_IDDQ_SWCTL;
1031 	value &= ~PLLE_MISC_IDDQ_OVERRIDE;
1032 	value |= PLLE_MISC_LOCK_ENABLE;
1033 	value |= PLLE_MISC_PTS;
1034 	value |= PLLE_MISC_VREG_BG_CTRL(3);
1035 	value |= PLLE_MISC_VREG_CTRL(2);
1036 	writel(value, NV_PA_CLK_RST_BASE + PLLE_MISC);
1037 
1038 	udelay(5);
1039 
1040 	value = readl(NV_PA_CLK_RST_BASE + PLLE_SS_CNTL);
1041 	value |= PLLE_SS_CNTL_SSCBYP | PLLE_SS_CNTL_INTERP_RESET |
1042 		 PLLE_SS_CNTL_BYPASS_SS;
1043 	writel(value, NV_PA_CLK_RST_BASE + PLLE_SS_CNTL);
1044 
1045 	value = readl(NV_PA_CLK_RST_BASE + PLLE_BASE);
1046 	value &= ~PLLE_BASE_PLDIV_CML(0xf);
1047 	value &= ~PLLE_BASE_NDIV(0xff);
1048 	value &= ~PLLE_BASE_MDIV(0xff);
1049 	value |= PLLE_BASE_PLDIV_CML(cpcon);
1050 	value |= PLLE_BASE_NDIV(n);
1051 	value |= PLLE_BASE_MDIV(m);
1052 	writel(value, NV_PA_CLK_RST_BASE + PLLE_BASE);
1053 
1054 	udelay(1);
1055 
1056 	value = readl(NV_PA_CLK_RST_BASE + PLLE_BASE);
1057 	value |= PLLE_BASE_ENABLE;
1058 	writel(value, NV_PA_CLK_RST_BASE + PLLE_BASE);
1059 
1060 	/* wait for lock */
1061 	udelay(300);
1062 
1063 	value = readl(NV_PA_CLK_RST_BASE + PLLE_SS_CNTL);
1064 	value &= ~PLLE_SS_CNTL_SSCINVERT;
1065 	value &= ~PLLE_SS_CNTL_SSCCENTER;
1066 
1067 	value &= ~PLLE_SS_CNTL_SSCINCINTR(0x3f);
1068 	value &= ~PLLE_SS_CNTL_SSCINC(0xff);
1069 	value &= ~PLLE_SS_CNTL_SSCMAX(0x1ff);
1070 
1071 	value |= PLLE_SS_CNTL_SSCINCINTR(0x20);
1072 	value |= PLLE_SS_CNTL_SSCINC(0x01);
1073 	value |= PLLE_SS_CNTL_SSCMAX(0x25);
1074 
1075 	writel(value, NV_PA_CLK_RST_BASE + PLLE_SS_CNTL);
1076 
1077 	value = readl(NV_PA_CLK_RST_BASE + PLLE_SS_CNTL);
1078 	value &= ~PLLE_SS_CNTL_SSCBYP;
1079 	value &= ~PLLE_SS_CNTL_BYPASS_SS;
1080 	writel(value, NV_PA_CLK_RST_BASE + PLLE_SS_CNTL);
1081 
1082 	udelay(1);
1083 
1084 	value = readl(NV_PA_CLK_RST_BASE + PLLE_SS_CNTL);
1085 	value &= ~PLLE_SS_CNTL_INTERP_RESET;
1086 	writel(value, NV_PA_CLK_RST_BASE + PLLE_SS_CNTL);
1087 
1088 	udelay(1);
1089 
1090 	return 0;
1091 }
1092