1 /* 2 * (C) Copyright 2010,2011 3 * NVIDIA Corporation <www.nvidia.com> 4 * 5 * SPDX-License-Identifier: GPL-2.0+ 6 */ 7 8 #include <common.h> 9 #include <dm.h> 10 #include <errno.h> 11 #include <ns16550.h> 12 #include <linux/compiler.h> 13 #include <linux/sizes.h> 14 #include <asm/io.h> 15 #include <asm/arch/clock.h> 16 #include <asm/arch/funcmux.h> 17 #include <asm/arch/pinmux.h> 18 #include <asm/arch/pmu.h> 19 #include <asm/arch/tegra.h> 20 #include <asm/arch-tegra/ap.h> 21 #include <asm/arch-tegra/board.h> 22 #include <asm/arch-tegra/clk_rst.h> 23 #include <asm/arch-tegra/pmc.h> 24 #include <asm/arch-tegra/sys_proto.h> 25 #include <asm/arch-tegra/uart.h> 26 #include <asm/arch-tegra/warmboot.h> 27 #include <asm/arch-tegra/gpu.h> 28 #ifdef CONFIG_TEGRA_CLOCK_SCALING 29 #include <asm/arch/emc.h> 30 #endif 31 #include <asm/arch-tegra/usb.h> 32 #ifdef CONFIG_USB_EHCI_TEGRA 33 #include <usb.h> 34 #endif 35 #include <asm/arch-tegra/xusb-padctl.h> 36 #include <power/as3722.h> 37 #include <i2c.h> 38 #include <spi.h> 39 #include "emc.h" 40 41 DECLARE_GLOBAL_DATA_PTR; 42 43 #ifdef CONFIG_SPL_BUILD 44 /* TODO(sjg@chromium.org): Remove once SPL supports device tree */ 45 U_BOOT_DEVICE(tegra_gpios) = { 46 "gpio_tegra" 47 }; 48 #endif 49 50 __weak void pinmux_init(void) {} 51 __weak void pin_mux_usb(void) {} 52 __weak void pin_mux_spi(void) {} 53 __weak void pin_mux_mmc(void) {} 54 __weak void gpio_early_init_uart(void) {} 55 __weak void pin_mux_display(void) {} 56 __weak void start_cpu_fan(void) {} 57 58 #if defined(CONFIG_TEGRA_NAND) 59 __weak void pin_mux_nand(void) 60 { 61 funcmux_select(PERIPH_ID_NDFLASH, FUNCMUX_DEFAULT); 62 } 63 #endif 64 65 /* 66 * Routine: power_det_init 67 * Description: turn off power detects 68 */ 69 static void power_det_init(void) 70 { 71 #if defined(CONFIG_TEGRA20) 72 struct pmc_ctlr *const pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE; 73 74 /* turn off power detects */ 75 writel(0, &pmc->pmc_pwr_det_latch); 76 writel(0, &pmc->pmc_pwr_det); 77 #endif 78 } 79 80 __weak int tegra_board_id(void) 81 { 82 return -1; 83 } 84 85 #ifdef CONFIG_DISPLAY_BOARDINFO 86 int checkboard(void) 87 { 88 int board_id = tegra_board_id(); 89 90 printf("Board: %s", CONFIG_TEGRA_BOARD_STRING); 91 if (board_id != -1) 92 printf(", ID: %d\n", board_id); 93 printf("\n"); 94 95 return 0; 96 } 97 #endif /* CONFIG_DISPLAY_BOARDINFO */ 98 99 __weak int tegra_lcd_pmic_init(int board_it) 100 { 101 return 0; 102 } 103 104 __weak int nvidia_board_init(void) 105 { 106 return 0; 107 } 108 109 /* 110 * Routine: board_init 111 * Description: Early hardware init. 112 */ 113 int board_init(void) 114 { 115 __maybe_unused int err; 116 __maybe_unused int board_id; 117 118 /* Do clocks and UART first so that printf() works */ 119 clock_init(); 120 clock_verify(); 121 122 tegra_gpu_config(); 123 124 #ifdef CONFIG_TEGRA_SPI 125 pin_mux_spi(); 126 #endif 127 128 #ifdef CONFIG_MMC_SDHCI_TEGRA 129 pin_mux_mmc(); 130 #endif 131 132 /* Init is handled automatically in the driver-model case */ 133 #if defined(CONFIG_DM_VIDEO) 134 pin_mux_display(); 135 #endif 136 /* boot param addr */ 137 gd->bd->bi_boot_params = (NV_PA_SDRAM_BASE + 0x100); 138 139 power_det_init(); 140 141 #ifdef CONFIG_SYS_I2C_TEGRA 142 # ifdef CONFIG_TEGRA_PMU 143 if (pmu_set_nominal()) 144 debug("Failed to select nominal voltages\n"); 145 # ifdef CONFIG_TEGRA_CLOCK_SCALING 146 err = board_emc_init(); 147 if (err) 148 debug("Memory controller init failed: %d\n", err); 149 # endif 150 # endif /* CONFIG_TEGRA_PMU */ 151 #ifdef CONFIG_AS3722_POWER 152 err = as3722_init(NULL); 153 if (err && err != -ENODEV) 154 return err; 155 #endif 156 #endif /* CONFIG_SYS_I2C_TEGRA */ 157 158 #ifdef CONFIG_USB_EHCI_TEGRA 159 pin_mux_usb(); 160 #endif 161 162 #if defined(CONFIG_DM_VIDEO) 163 board_id = tegra_board_id(); 164 err = tegra_lcd_pmic_init(board_id); 165 if (err) 166 return err; 167 #endif 168 169 #ifdef CONFIG_TEGRA_NAND 170 pin_mux_nand(); 171 #endif 172 173 tegra_xusb_padctl_init(gd->fdt_blob); 174 175 #ifdef CONFIG_TEGRA_LP0 176 /* save Sdram params to PMC 2, 4, and 24 for WB0 */ 177 warmboot_save_sdram_params(); 178 179 /* prepare the WB code to LP0 location */ 180 warmboot_prepare_code(TEGRA_LP0_ADDR, TEGRA_LP0_SIZE); 181 #endif 182 return nvidia_board_init(); 183 } 184 185 #ifdef CONFIG_BOARD_EARLY_INIT_F 186 static void __gpio_early_init(void) 187 { 188 } 189 190 void gpio_early_init(void) __attribute__((weak, alias("__gpio_early_init"))); 191 192 int board_early_init_f(void) 193 { 194 #if defined(CONFIG_TEGRA_DISCONNECT_UDC_ON_BOOT) 195 #define USBCMD_FS2 (1 << 15) 196 { 197 struct usb_ctlr *usbctlr = (struct usb_ctlr *)0x7d000000; 198 writel(USBCMD_FS2, &usbctlr->usb_cmd); 199 } 200 #endif 201 202 /* Do any special system timer/TSC setup */ 203 #if defined(CONFIG_TEGRA_SUPPORT_NON_SECURE) 204 if (!tegra_cpu_is_non_secure()) 205 #endif 206 arch_timer_init(); 207 208 pinmux_init(); 209 board_init_uart_f(); 210 211 /* Initialize periph GPIOs */ 212 gpio_early_init(); 213 gpio_early_init_uart(); 214 215 return 0; 216 } 217 #endif /* EARLY_INIT */ 218 219 int board_late_init(void) 220 { 221 #if defined(CONFIG_TEGRA_SUPPORT_NON_SECURE) 222 if (tegra_cpu_is_non_secure()) { 223 printf("CPU is in NS mode\n"); 224 setenv("cpu_ns_mode", "1"); 225 } else { 226 setenv("cpu_ns_mode", ""); 227 } 228 #endif 229 start_cpu_fan(); 230 231 return 0; 232 } 233 234 /* 235 * In some SW environments, a memory carve-out exists to house a secure 236 * monitor, a trusted OS, and/or various statically allocated media buffers. 237 * 238 * This carveout exists at the highest possible address that is within a 239 * 32-bit physical address space. 240 * 241 * This function returns the total size of this carve-out. At present, the 242 * returned value is hard-coded for simplicity. In the future, it may be 243 * possible to determine the carve-out size: 244 * - By querying some run-time information source, such as: 245 * - A structure passed to U-Boot by earlier boot software. 246 * - SoC registers. 247 * - A call into the secure monitor. 248 * - In the per-board U-Boot configuration header, based on knowledge of the 249 * SW environment that U-Boot is being built for. 250 * 251 * For now, we support two configurations in U-Boot: 252 * - 32-bit ports without any form of carve-out. 253 * - 64 bit ports which are assumed to use a carve-out of a conservatively 254 * hard-coded size. 255 */ 256 static ulong carveout_size(void) 257 { 258 #ifdef CONFIG_ARM64 259 return SZ_512M; 260 #else 261 return 0; 262 #endif 263 } 264 265 /* 266 * Determine the amount of usable RAM below 4GiB, taking into account any 267 * carve-out that may be assigned. 268 */ 269 static ulong usable_ram_size_below_4g(void) 270 { 271 ulong total_size_below_4g; 272 ulong usable_size_below_4g; 273 274 /* 275 * The total size of RAM below 4GiB is the lesser address of: 276 * (a) 2GiB itself (RAM starts at 2GiB, and 4GiB - 2GiB == 2GiB). 277 * (b) The size RAM physically present in the system. 278 */ 279 if (gd->ram_size < SZ_2G) 280 total_size_below_4g = gd->ram_size; 281 else 282 total_size_below_4g = SZ_2G; 283 284 /* Calculate usable RAM by subtracting out any carve-out size */ 285 usable_size_below_4g = total_size_below_4g - carveout_size(); 286 287 return usable_size_below_4g; 288 } 289 290 /* 291 * Represent all available RAM in either one or two banks. 292 * 293 * The first bank describes any usable RAM below 4GiB. 294 * The second bank describes any RAM above 4GiB. 295 * 296 * This split is driven by the following requirements: 297 * - The NVIDIA L4T kernel requires separate entries in the DT /memory/reg 298 * property for memory below and above the 4GiB boundary. The layout of that 299 * DT property is directly driven by the entries in the U-Boot bank array. 300 * - The potential existence of a carve-out at the end of RAM below 4GiB can 301 * only be represented using multiple banks. 302 * 303 * Explicitly removing the carve-out RAM from the bank entries makes the RAM 304 * layout a bit more obvious, e.g. when running "bdinfo" at the U-Boot 305 * command-line. 306 * 307 * This does mean that the DT U-Boot passes to the Linux kernel will not 308 * include this RAM in /memory/reg at all. An alternative would be to include 309 * all RAM in the U-Boot banks (and hence DT), and add a /memreserve/ node 310 * into DT to stop the kernel from using the RAM. IIUC, I don't /think/ the 311 * Linux kernel will ever need to access any RAM in* the carve-out via a CPU 312 * mapping, so either way is acceptable. 313 * 314 * On 32-bit systems, we never define a bank for RAM above 4GiB, since the 315 * start address of that bank cannot be represented in the 32-bit .size 316 * field. 317 */ 318 void dram_init_banksize(void) 319 { 320 gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE; 321 gd->bd->bi_dram[0].size = usable_ram_size_below_4g(); 322 323 #ifdef CONFIG_PCI 324 gd->pci_ram_top = gd->bd->bi_dram[0].start + gd->bd->bi_dram[0].size; 325 #endif 326 327 #ifdef CONFIG_PHYS_64BIT 328 if (gd->ram_size > SZ_2G) { 329 gd->bd->bi_dram[1].start = 0x100000000; 330 gd->bd->bi_dram[1].size = gd->ram_size - SZ_2G; 331 } else 332 #endif 333 { 334 gd->bd->bi_dram[1].start = 0; 335 gd->bd->bi_dram[1].size = 0; 336 } 337 } 338 339 /* 340 * Most hardware on 64-bit Tegra is still restricted to DMA to the lower 341 * 32-bits of the physical address space. Cap the maximum usable RAM area 342 * at 4 GiB to avoid DMA buffers from being allocated beyond the 32-bit 343 * boundary that most devices can address. Also, don't let U-Boot use any 344 * carve-out, as mentioned above. 345 * 346 * This function is called before dram_init_banksize(), so we can't simply 347 * return gd->bd->bi_dram[1].start + gd->bd->bi_dram[1].size. 348 */ 349 ulong board_get_usable_ram_top(ulong total_size) 350 { 351 return CONFIG_SYS_SDRAM_BASE + usable_ram_size_below_4g(); 352 } 353