1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * (C) Copyright 2010,2011 4 * NVIDIA Corporation <www.nvidia.com> 5 */ 6 7 #include <common.h> 8 #include <dm.h> 9 #include <errno.h> 10 #include <ns16550.h> 11 #include <usb.h> 12 #include <asm/io.h> 13 #include <asm/arch-tegra/ap.h> 14 #include <asm/arch-tegra/board.h> 15 #include <asm/arch-tegra/clk_rst.h> 16 #include <asm/arch-tegra/pmc.h> 17 #include <asm/arch-tegra/sys_proto.h> 18 #include <asm/arch-tegra/uart.h> 19 #include <asm/arch-tegra/warmboot.h> 20 #include <asm/arch-tegra/gpu.h> 21 #include <asm/arch-tegra/usb.h> 22 #include <asm/arch-tegra/xusb-padctl.h> 23 #include <asm/arch/clock.h> 24 #include <asm/arch/funcmux.h> 25 #include <asm/arch/pinmux.h> 26 #include <asm/arch/pmu.h> 27 #include <asm/arch/tegra.h> 28 #ifdef CONFIG_TEGRA_CLOCK_SCALING 29 #include <asm/arch/emc.h> 30 #endif 31 #include "emc.h" 32 33 DECLARE_GLOBAL_DATA_PTR; 34 35 #ifdef CONFIG_SPL_BUILD 36 /* TODO(sjg@chromium.org): Remove once SPL supports device tree */ 37 U_BOOT_DEVICE(tegra_gpios) = { 38 "gpio_tegra" 39 }; 40 #endif 41 42 __weak void pinmux_init(void) {} 43 __weak void pin_mux_usb(void) {} 44 __weak void pin_mux_spi(void) {} 45 __weak void pin_mux_mmc(void) {} 46 __weak void gpio_early_init_uart(void) {} 47 __weak void pin_mux_display(void) {} 48 __weak void start_cpu_fan(void) {} 49 50 #if defined(CONFIG_TEGRA_NAND) 51 __weak void pin_mux_nand(void) 52 { 53 funcmux_select(PERIPH_ID_NDFLASH, FUNCMUX_DEFAULT); 54 } 55 #endif 56 57 /* 58 * Routine: power_det_init 59 * Description: turn off power detects 60 */ 61 static void power_det_init(void) 62 { 63 #if defined(CONFIG_TEGRA20) 64 struct pmc_ctlr *const pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE; 65 66 /* turn off power detects */ 67 writel(0, &pmc->pmc_pwr_det_latch); 68 writel(0, &pmc->pmc_pwr_det); 69 #endif 70 } 71 72 __weak int tegra_board_id(void) 73 { 74 return -1; 75 } 76 77 #ifdef CONFIG_DISPLAY_BOARDINFO 78 int checkboard(void) 79 { 80 int board_id = tegra_board_id(); 81 82 printf("Board: %s", CONFIG_TEGRA_BOARD_STRING); 83 if (board_id != -1) 84 printf(", ID: %d\n", board_id); 85 printf("\n"); 86 87 return 0; 88 } 89 #endif /* CONFIG_DISPLAY_BOARDINFO */ 90 91 __weak int tegra_lcd_pmic_init(int board_it) 92 { 93 return 0; 94 } 95 96 __weak int nvidia_board_init(void) 97 { 98 return 0; 99 } 100 101 /* 102 * Routine: board_init 103 * Description: Early hardware init. 104 */ 105 int board_init(void) 106 { 107 __maybe_unused int err; 108 __maybe_unused int board_id; 109 110 /* Do clocks and UART first so that printf() works */ 111 clock_init(); 112 clock_verify(); 113 114 tegra_gpu_config(); 115 116 #ifdef CONFIG_TEGRA_SPI 117 pin_mux_spi(); 118 #endif 119 120 #ifdef CONFIG_MMC_SDHCI_TEGRA 121 pin_mux_mmc(); 122 #endif 123 124 /* Init is handled automatically in the driver-model case */ 125 #if defined(CONFIG_DM_VIDEO) 126 pin_mux_display(); 127 #endif 128 /* boot param addr */ 129 gd->bd->bi_boot_params = (NV_PA_SDRAM_BASE + 0x100); 130 131 power_det_init(); 132 133 #ifdef CONFIG_SYS_I2C_TEGRA 134 # ifdef CONFIG_TEGRA_PMU 135 if (pmu_set_nominal()) 136 debug("Failed to select nominal voltages\n"); 137 # ifdef CONFIG_TEGRA_CLOCK_SCALING 138 err = board_emc_init(); 139 if (err) 140 debug("Memory controller init failed: %d\n", err); 141 # endif 142 # endif /* CONFIG_TEGRA_PMU */ 143 #endif /* CONFIG_SYS_I2C_TEGRA */ 144 145 #ifdef CONFIG_USB_EHCI_TEGRA 146 pin_mux_usb(); 147 #endif 148 149 #if defined(CONFIG_DM_VIDEO) 150 board_id = tegra_board_id(); 151 err = tegra_lcd_pmic_init(board_id); 152 if (err) { 153 debug("Failed to set up LCD PMIC\n"); 154 return err; 155 } 156 #endif 157 158 #ifdef CONFIG_TEGRA_NAND 159 pin_mux_nand(); 160 #endif 161 162 tegra_xusb_padctl_init(); 163 164 #ifdef CONFIG_TEGRA_LP0 165 /* save Sdram params to PMC 2, 4, and 24 for WB0 */ 166 warmboot_save_sdram_params(); 167 168 /* prepare the WB code to LP0 location */ 169 warmboot_prepare_code(TEGRA_LP0_ADDR, TEGRA_LP0_SIZE); 170 #endif 171 return nvidia_board_init(); 172 } 173 174 #ifdef CONFIG_BOARD_EARLY_INIT_F 175 static void __gpio_early_init(void) 176 { 177 } 178 179 void gpio_early_init(void) __attribute__((weak, alias("__gpio_early_init"))); 180 181 int board_early_init_f(void) 182 { 183 if (!clock_early_init_done()) 184 clock_early_init(); 185 186 #if defined(CONFIG_TEGRA_DISCONNECT_UDC_ON_BOOT) 187 #define USBCMD_FS2 (1 << 15) 188 { 189 struct usb_ctlr *usbctlr = (struct usb_ctlr *)0x7d000000; 190 writel(USBCMD_FS2, &usbctlr->usb_cmd); 191 } 192 #endif 193 194 /* Do any special system timer/TSC setup */ 195 #if defined(CONFIG_TEGRA_SUPPORT_NON_SECURE) 196 if (!tegra_cpu_is_non_secure()) 197 #endif 198 arch_timer_init(); 199 200 pinmux_init(); 201 board_init_uart_f(); 202 203 /* Initialize periph GPIOs */ 204 gpio_early_init(); 205 gpio_early_init_uart(); 206 207 return 0; 208 } 209 #endif /* EARLY_INIT */ 210 211 int board_late_init(void) 212 { 213 #if defined(CONFIG_TEGRA_SUPPORT_NON_SECURE) 214 if (tegra_cpu_is_non_secure()) { 215 printf("CPU is in NS mode\n"); 216 env_set("cpu_ns_mode", "1"); 217 } else { 218 env_set("cpu_ns_mode", ""); 219 } 220 #endif 221 start_cpu_fan(); 222 223 return 0; 224 } 225 226 /* 227 * In some SW environments, a memory carve-out exists to house a secure 228 * monitor, a trusted OS, and/or various statically allocated media buffers. 229 * 230 * This carveout exists at the highest possible address that is within a 231 * 32-bit physical address space. 232 * 233 * This function returns the total size of this carve-out. At present, the 234 * returned value is hard-coded for simplicity. In the future, it may be 235 * possible to determine the carve-out size: 236 * - By querying some run-time information source, such as: 237 * - A structure passed to U-Boot by earlier boot software. 238 * - SoC registers. 239 * - A call into the secure monitor. 240 * - In the per-board U-Boot configuration header, based on knowledge of the 241 * SW environment that U-Boot is being built for. 242 * 243 * For now, we support two configurations in U-Boot: 244 * - 32-bit ports without any form of carve-out. 245 * - 64 bit ports which are assumed to use a carve-out of a conservatively 246 * hard-coded size. 247 */ 248 static ulong carveout_size(void) 249 { 250 #ifdef CONFIG_ARM64 251 return SZ_512M; 252 #elif defined(CONFIG_ARMV7_SECURE_RESERVE_SIZE) 253 // BASE+SIZE might not == 4GB. If so, we want the carveout to cover 254 // from BASE to 4GB, not BASE to BASE+SIZE. 255 return (0 - CONFIG_ARMV7_SECURE_BASE) & ~(SZ_2M - 1); 256 #else 257 return 0; 258 #endif 259 } 260 261 /* 262 * Determine the amount of usable RAM below 4GiB, taking into account any 263 * carve-out that may be assigned. 264 */ 265 static ulong usable_ram_size_below_4g(void) 266 { 267 ulong total_size_below_4g; 268 ulong usable_size_below_4g; 269 270 /* 271 * The total size of RAM below 4GiB is the lesser address of: 272 * (a) 2GiB itself (RAM starts at 2GiB, and 4GiB - 2GiB == 2GiB). 273 * (b) The size RAM physically present in the system. 274 */ 275 if (gd->ram_size < SZ_2G) 276 total_size_below_4g = gd->ram_size; 277 else 278 total_size_below_4g = SZ_2G; 279 280 /* Calculate usable RAM by subtracting out any carve-out size */ 281 usable_size_below_4g = total_size_below_4g - carveout_size(); 282 283 return usable_size_below_4g; 284 } 285 286 /* 287 * Represent all available RAM in either one or two banks. 288 * 289 * The first bank describes any usable RAM below 4GiB. 290 * The second bank describes any RAM above 4GiB. 291 * 292 * This split is driven by the following requirements: 293 * - The NVIDIA L4T kernel requires separate entries in the DT /memory/reg 294 * property for memory below and above the 4GiB boundary. The layout of that 295 * DT property is directly driven by the entries in the U-Boot bank array. 296 * - The potential existence of a carve-out at the end of RAM below 4GiB can 297 * only be represented using multiple banks. 298 * 299 * Explicitly removing the carve-out RAM from the bank entries makes the RAM 300 * layout a bit more obvious, e.g. when running "bdinfo" at the U-Boot 301 * command-line. 302 * 303 * This does mean that the DT U-Boot passes to the Linux kernel will not 304 * include this RAM in /memory/reg at all. An alternative would be to include 305 * all RAM in the U-Boot banks (and hence DT), and add a /memreserve/ node 306 * into DT to stop the kernel from using the RAM. IIUC, I don't /think/ the 307 * Linux kernel will ever need to access any RAM in* the carve-out via a CPU 308 * mapping, so either way is acceptable. 309 * 310 * On 32-bit systems, we never define a bank for RAM above 4GiB, since the 311 * start address of that bank cannot be represented in the 32-bit .size 312 * field. 313 */ 314 int dram_init_banksize(void) 315 { 316 gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE; 317 gd->bd->bi_dram[0].size = usable_ram_size_below_4g(); 318 319 #ifdef CONFIG_PCI 320 gd->pci_ram_top = gd->bd->bi_dram[0].start + gd->bd->bi_dram[0].size; 321 #endif 322 323 #ifdef CONFIG_PHYS_64BIT 324 if (gd->ram_size > SZ_2G) { 325 gd->bd->bi_dram[1].start = 0x100000000; 326 gd->bd->bi_dram[1].size = gd->ram_size - SZ_2G; 327 } else 328 #endif 329 { 330 gd->bd->bi_dram[1].start = 0; 331 gd->bd->bi_dram[1].size = 0; 332 } 333 334 return 0; 335 } 336 337 /* 338 * Most hardware on 64-bit Tegra is still restricted to DMA to the lower 339 * 32-bits of the physical address space. Cap the maximum usable RAM area 340 * at 4 GiB to avoid DMA buffers from being allocated beyond the 32-bit 341 * boundary that most devices can address. Also, don't let U-Boot use any 342 * carve-out, as mentioned above. 343 * 344 * This function is called before dram_init_banksize(), so we can't simply 345 * return gd->bd->bi_dram[1].start + gd->bd->bi_dram[1].size. 346 */ 347 ulong board_get_usable_ram_top(ulong total_size) 348 { 349 return CONFIG_SYS_SDRAM_BASE + usable_ram_size_below_4g(); 350 } 351