1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * Sunxi A31 Power Management Unit 4 * 5 * (C) Copyright 2013 Oliver Schinagl <oliver@schinagl.nl> 6 * http://linux-sunxi.org 7 * 8 * Based on sun6i sources and earlier U-Boot Allwiner A10 SPL work 9 * 10 * (C) Copyright 2006-2013 11 * Allwinner Technology Co., Ltd. <www.allwinnertech.com> 12 * Berg Xing <bergxing@allwinnertech.com> 13 * Tom Cubie <tangliang@allwinnertech.com> 14 */ 15 16 #include <common.h> 17 #include <errno.h> 18 #include <asm/io.h> 19 #include <asm/arch/cpu.h> 20 #include <asm/arch/gpio.h> 21 #include <asm/arch/p2wi.h> 22 #include <asm/arch/prcm.h> 23 #include <asm/arch/clock.h> 24 #include <asm/arch/sys_proto.h> 25 26 void p2wi_init(void) 27 { 28 struct sunxi_p2wi_reg *p2wi = (struct sunxi_p2wi_reg *)SUN6I_P2WI_BASE; 29 30 /* Enable p2wi and PIO clk, and de-assert their resets */ 31 prcm_apb0_enable(PRCM_APB0_GATE_PIO | PRCM_APB0_GATE_P2WI); 32 33 sunxi_gpio_set_cfgpin(SUNXI_GPL(0), SUN6I_GPL0_R_P2WI_SCK); 34 sunxi_gpio_set_cfgpin(SUNXI_GPL(1), SUN6I_GPL1_R_P2WI_SDA); 35 36 /* Reset p2wi controller and set clock to CLKIN(12)/8 = 1.5 MHz */ 37 writel(P2WI_CTRL_RESET, &p2wi->ctrl); 38 sdelay(0x100); 39 writel(P2WI_CC_SDA_OUT_DELAY(1) | P2WI_CC_CLK_DIV(8), 40 &p2wi->cc); 41 } 42 43 int p2wi_change_to_p2wi_mode(u8 slave_addr, u8 ctrl_reg, u8 init_data) 44 { 45 struct sunxi_p2wi_reg *p2wi = (struct sunxi_p2wi_reg *)SUN6I_P2WI_BASE; 46 unsigned long tmo = timer_get_us() + 1000000; 47 48 writel(P2WI_PM_DEV_ADDR(slave_addr) | 49 P2WI_PM_CTRL_ADDR(ctrl_reg) | 50 P2WI_PM_INIT_DATA(init_data) | 51 P2WI_PM_INIT_SEND, 52 &p2wi->pm); 53 54 while ((readl(&p2wi->pm) & P2WI_PM_INIT_SEND)) { 55 if (timer_get_us() > tmo) 56 return -ETIME; 57 } 58 59 return 0; 60 } 61 62 static int p2wi_await_trans(void) 63 { 64 struct sunxi_p2wi_reg *p2wi = (struct sunxi_p2wi_reg *)SUN6I_P2WI_BASE; 65 unsigned long tmo = timer_get_us() + 1000000; 66 int ret; 67 u8 reg; 68 69 while (1) { 70 reg = readl(&p2wi->status); 71 if (reg & P2WI_STAT_TRANS_ERR) { 72 ret = -EIO; 73 break; 74 } 75 if (reg & P2WI_STAT_TRANS_DONE) { 76 ret = 0; 77 break; 78 } 79 if (timer_get_us() > tmo) { 80 ret = -ETIME; 81 break; 82 } 83 } 84 writel(reg, &p2wi->status); /* Clear status bits */ 85 return ret; 86 } 87 88 int p2wi_read(const u8 addr, u8 *data) 89 { 90 struct sunxi_p2wi_reg *p2wi = (struct sunxi_p2wi_reg *)SUN6I_P2WI_BASE; 91 int ret; 92 93 writel(P2WI_DATADDR_BYTE_1(addr), &p2wi->dataddr0); 94 writel(P2WI_DATA_NUM_BYTES(1) | 95 P2WI_DATA_NUM_BYTES_READ, &p2wi->numbytes); 96 writel(P2WI_STAT_TRANS_DONE, &p2wi->status); 97 writel(P2WI_CTRL_TRANS_START, &p2wi->ctrl); 98 99 ret = p2wi_await_trans(); 100 101 *data = readl(&p2wi->data0) & P2WI_DATA_BYTE_1_MASK; 102 return ret; 103 } 104 105 int p2wi_write(const u8 addr, u8 data) 106 { 107 struct sunxi_p2wi_reg *p2wi = (struct sunxi_p2wi_reg *)SUN6I_P2WI_BASE; 108 109 writel(P2WI_DATADDR_BYTE_1(addr), &p2wi->dataddr0); 110 writel(P2WI_DATA_BYTE_1(data), &p2wi->data0); 111 writel(P2WI_DATA_NUM_BYTES(1), &p2wi->numbytes); 112 writel(P2WI_STAT_TRANS_DONE, &p2wi->status); 113 writel(P2WI_CTRL_TRANS_START, &p2wi->ctrl); 114 115 return p2wi_await_trans(); 116 } 117