xref: /openbmc/u-boot/arch/arm/mach-sunxi/p2wi.c (revision 1d2c0506)
1 /*
2  * Sunxi A31 Power Management Unit
3  *
4  * (C) Copyright 2013 Oliver Schinagl <oliver@schinagl.nl>
5  * http://linux-sunxi.org
6  *
7  * Based on sun6i sources and earlier U-Boot Allwiner A10 SPL work
8  *
9  * (C) Copyright 2006-2013
10  * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
11  * Berg Xing <bergxing@allwinnertech.com>
12  * Tom Cubie <tangliang@allwinnertech.com>
13  *
14  * SPDX-License-Identifier:	GPL-2.0+
15  */
16 
17 #include <common.h>
18 #include <errno.h>
19 #include <asm/io.h>
20 #include <asm/arch/cpu.h>
21 #include <asm/arch/gpio.h>
22 #include <asm/arch/p2wi.h>
23 #include <asm/arch/prcm.h>
24 #include <asm/arch/clock.h>
25 #include <asm/arch/sys_proto.h>
26 
27 void p2wi_init(void)
28 {
29 	struct sunxi_p2wi_reg *p2wi = (struct sunxi_p2wi_reg *)SUN6I_P2WI_BASE;
30 
31 	/* Enable p2wi and PIO clk, and de-assert their resets */
32 	prcm_apb0_enable(PRCM_APB0_GATE_PIO | PRCM_APB0_GATE_P2WI);
33 
34 	sunxi_gpio_set_cfgpin(SUNXI_GPL(0), SUN6I_GPL0_R_P2WI_SCK);
35 	sunxi_gpio_set_cfgpin(SUNXI_GPL(1), SUN6I_GPL1_R_P2WI_SDA);
36 
37 	/* Reset p2wi controller and set clock to CLKIN(12)/8 = 1.5 MHz */
38 	writel(P2WI_CTRL_RESET, &p2wi->ctrl);
39 	sdelay(0x100);
40 	writel(P2WI_CC_SDA_OUT_DELAY(1) | P2WI_CC_CLK_DIV(8),
41 	       &p2wi->cc);
42 }
43 
44 int p2wi_change_to_p2wi_mode(u8 slave_addr, u8 ctrl_reg, u8 init_data)
45 {
46 	struct sunxi_p2wi_reg *p2wi = (struct sunxi_p2wi_reg *)SUN6I_P2WI_BASE;
47 	unsigned long tmo = timer_get_us() + 1000000;
48 
49 	writel(P2WI_PM_DEV_ADDR(slave_addr) |
50 	       P2WI_PM_CTRL_ADDR(ctrl_reg) |
51 	       P2WI_PM_INIT_DATA(init_data) |
52 	       P2WI_PM_INIT_SEND,
53 	       &p2wi->pm);
54 
55 	while ((readl(&p2wi->pm) & P2WI_PM_INIT_SEND)) {
56 		if (timer_get_us() > tmo)
57 			return -ETIME;
58 	}
59 
60 	return 0;
61 }
62 
63 static int p2wi_await_trans(void)
64 {
65 	struct sunxi_p2wi_reg *p2wi = (struct sunxi_p2wi_reg *)SUN6I_P2WI_BASE;
66 	unsigned long tmo = timer_get_us() + 1000000;
67 	int ret;
68 	u8 reg;
69 
70 	while (1) {
71 		reg = readl(&p2wi->status);
72 		if (reg & P2WI_STAT_TRANS_ERR) {
73 			ret = -EIO;
74 			break;
75 		}
76 		if (reg & P2WI_STAT_TRANS_DONE) {
77 			ret = 0;
78 			break;
79 		}
80 		if (timer_get_us() > tmo) {
81 			ret = -ETIME;
82 			break;
83 		}
84 	}
85 	writel(reg, &p2wi->status); /* Clear status bits */
86 	return ret;
87 }
88 
89 int p2wi_read(const u8 addr, u8 *data)
90 {
91 	struct sunxi_p2wi_reg *p2wi = (struct sunxi_p2wi_reg *)SUN6I_P2WI_BASE;
92 	int ret;
93 
94 	writel(P2WI_DATADDR_BYTE_1(addr), &p2wi->dataddr0);
95 	writel(P2WI_DATA_NUM_BYTES(1) |
96 	       P2WI_DATA_NUM_BYTES_READ, &p2wi->numbytes);
97 	writel(P2WI_STAT_TRANS_DONE, &p2wi->status);
98 	writel(P2WI_CTRL_TRANS_START, &p2wi->ctrl);
99 
100 	ret = p2wi_await_trans();
101 
102 	*data = readl(&p2wi->data0) & P2WI_DATA_BYTE_1_MASK;
103 	return ret;
104 }
105 
106 int p2wi_write(const u8 addr, u8 data)
107 {
108 	struct sunxi_p2wi_reg *p2wi = (struct sunxi_p2wi_reg *)SUN6I_P2WI_BASE;
109 
110 	writel(P2WI_DATADDR_BYTE_1(addr), &p2wi->dataddr0);
111 	writel(P2WI_DATA_BYTE_1(data), &p2wi->data0);
112 	writel(P2WI_DATA_NUM_BYTES(1), &p2wi->numbytes);
113 	writel(P2WI_STAT_TRANS_DONE, &p2wi->status);
114 	writel(P2WI_CTRL_TRANS_START, &p2wi->ctrl);
115 
116 	return p2wi_await_trans();
117 }
118