1 /* 2 * sun50i H6 platform dram controller init 3 * 4 * (C) Copyright 2017 Icenowy Zheng <icenowy@aosc.io> 5 * 6 * SPDX-License-Identifier: GPL-2.0+ 7 */ 8 #include <common.h> 9 #include <asm/io.h> 10 #include <asm/arch/clock.h> 11 #include <asm/arch/dram.h> 12 #include <asm/arch/cpu.h> 13 #include <linux/bitops.h> 14 #include <linux/kconfig.h> 15 16 /* 17 * The DRAM controller structure on H6 is similar to the ones on A23/A80: 18 * they all contains 3 parts, COM, CTL and PHY. (As a note on A33/A83T/H3/A64 19 * /H5/R40 CTL and PHY is composed). 20 * 21 * COM is allwinner-specific. On H6, the address mapping function is moved 22 * from COM to CTL (with the standard ADDRMAP registers on DesignWare memory 23 * controller). 24 * 25 * CTL (controller) and PHY is from DesignWare. 26 * 27 * The CTL part is a bit similar to the one on A23/A80 (because they all 28 * originate from DesignWare), but gets more registers added. 29 * 30 * The PHY part is quite new, not seen in any previous Allwinner SoCs, and 31 * not seen on other SoCs in U-Boot. The only SoC that is also known to have 32 * similar PHY is ZynqMP. 33 */ 34 35 /* 36 * The delay parameters below allow to allegedly specify delay times of some 37 * unknown unit for each individual bit trace in each of the four data bytes 38 * the 32-bit wide access consists of. Also three control signals can be 39 * adjusted individually. 40 */ 41 #define NR_OF_BYTE_LANES (32 / BITS_PER_BYTE) 42 /* The eight data lines (DQn) plus DM, DQS, DQS/DM/DQ Output Enable and DQSN */ 43 #define WR_LINES_PER_BYTE_LANE (BITS_PER_BYTE + 4) 44 /* 45 * The eight data lines (DQn) plus DM, DQS, DQS/DM/DQ Output Enable, DQSN, 46 * Termination and Power down 47 */ 48 #define RD_LINES_PER_BYTE_LANE (BITS_PER_BYTE + 6) 49 struct dram_para { 50 u32 clk; 51 enum sunxi_dram_type type; 52 u8 cols; 53 u8 rows; 54 u8 ranks; 55 const u8 dx_read_delays[NR_OF_BYTE_LANES][RD_LINES_PER_BYTE_LANE]; 56 const u8 dx_write_delays[NR_OF_BYTE_LANES][WR_LINES_PER_BYTE_LANE]; 57 }; 58 59 static void mctl_sys_init(struct dram_para *para); 60 static void mctl_com_init(struct dram_para *para); 61 static void mctl_set_timing_lpddr3(struct dram_para *para); 62 static void mctl_channel_init(struct dram_para *para); 63 64 static void mctl_core_init(struct dram_para *para) 65 { 66 mctl_sys_init(para); 67 mctl_com_init(para); 68 switch (para->type) { 69 case SUNXI_DRAM_TYPE_LPDDR3: 70 mctl_set_timing_lpddr3(para); 71 break; 72 default: 73 panic("Unsupported DRAM type!"); 74 }; 75 mctl_channel_init(para); 76 } 77 78 static void mctl_phy_pir_init(u32 val) 79 { 80 struct sunxi_mctl_phy_reg * const mctl_phy = 81 (struct sunxi_mctl_phy_reg *)SUNXI_DRAM_PHY0_BASE; 82 83 writel(val | BIT(0), &mctl_phy->pir); 84 mctl_await_completion(&mctl_phy->pgsr[0], BIT(0), BIT(0)); 85 } 86 87 enum { 88 MBUS_PORT_CPU = 0, 89 MBUS_PORT_GPU = 1, 90 MBUS_PORT_MAHB = 2, 91 MBUS_PORT_DMA = 3, 92 MBUS_PORT_VE = 4, 93 MBUS_PORT_CE = 5, 94 MBUS_PORT_TSC0 = 6, 95 MBUS_PORT_NDFC0 = 8, 96 MBUS_PORT_CSI0 = 11, 97 MBUS_PORT_DI0 = 14, 98 MBUS_PORT_DI1 = 15, 99 MBUS_PORT_DE300 = 16, 100 MBUS_PORT_IOMMU = 25, 101 MBUS_PORT_VE2 = 26, 102 MBUS_PORT_USB3 = 37, 103 MBUS_PORT_PCIE = 38, 104 MBUS_PORT_VP9 = 39, 105 MBUS_PORT_HDCP2 = 40, 106 }; 107 108 enum { 109 MBUS_QOS_LOWEST = 0, 110 MBUS_QOS_LOW, 111 MBUS_QOS_HIGH, 112 MBUS_QOS_HIGHEST 113 }; 114 inline void mbus_configure_port(u8 port, 115 bool bwlimit, 116 bool priority, 117 u8 qos, 118 u8 waittime, 119 u8 acs, 120 u16 bwl0, 121 u16 bwl1, 122 u16 bwl2) 123 { 124 struct sunxi_mctl_com_reg * const mctl_com = 125 (struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE; 126 127 const u32 cfg0 = ( (bwlimit ? (1 << 0) : 0) 128 | (priority ? (1 << 1) : 0) 129 | ((qos & 0x3) << 2) 130 | ((waittime & 0xf) << 4) 131 | ((acs & 0xff) << 8) 132 | (bwl0 << 16) ); 133 const u32 cfg1 = ((u32)bwl2 << 16) | (bwl1 & 0xffff); 134 135 debug("MBUS port %d cfg0 %08x cfg1 %08x\n", port, cfg0, cfg1); 136 writel(cfg0, &mctl_com->master[port].cfg0); 137 writel(cfg1, &mctl_com->master[port].cfg1); 138 } 139 140 #define MBUS_CONF(port, bwlimit, qos, acs, bwl0, bwl1, bwl2) \ 141 mbus_configure_port(MBUS_PORT_ ## port, bwlimit, false, \ 142 MBUS_QOS_ ## qos, 0, acs, bwl0, bwl1, bwl2) 143 144 static void mctl_set_master_priority(void) 145 { 146 struct sunxi_mctl_com_reg * const mctl_com = 147 (struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE; 148 149 /* enable bandwidth limit windows and set windows size 1us */ 150 writel(399, &mctl_com->tmr); 151 writel(BIT(16), &mctl_com->bwcr); 152 153 MBUS_CONF( CPU, true, HIGHEST, 0, 256, 128, 100); 154 MBUS_CONF( GPU, true, HIGH, 0, 1536, 1400, 256); 155 MBUS_CONF( MAHB, true, HIGHEST, 0, 512, 256, 96); 156 MBUS_CONF( DMA, true, HIGH, 0, 256, 100, 80); 157 MBUS_CONF( VE, true, HIGH, 2, 8192, 5500, 5000); 158 MBUS_CONF( CE, true, HIGH, 2, 100, 64, 32); 159 MBUS_CONF( TSC0, true, HIGH, 2, 100, 64, 32); 160 MBUS_CONF(NDFC0, true, HIGH, 0, 256, 128, 64); 161 MBUS_CONF( CSI0, true, HIGH, 0, 256, 128, 100); 162 MBUS_CONF( DI0, true, HIGH, 0, 1024, 256, 64); 163 MBUS_CONF(DE300, true, HIGHEST, 6, 8192, 2800, 2400); 164 MBUS_CONF(IOMMU, true, HIGHEST, 0, 100, 64, 32); 165 MBUS_CONF( VE2, true, HIGH, 2, 8192, 5500, 5000); 166 MBUS_CONF( USB3, true, HIGH, 0, 256, 128, 64); 167 MBUS_CONF( PCIE, true, HIGH, 2, 100, 64, 32); 168 MBUS_CONF( VP9, true, HIGH, 2, 8192, 5500, 5000); 169 MBUS_CONF(HDCP2, true, HIGH, 2, 100, 64, 32); 170 } 171 172 static u32 mr_lpddr3[12] = { 173 0x00000000, 0x00000043, 0x0000001a, 0x00000001, 174 0x00000000, 0x00000000, 0x00000048, 0x00000000, 175 0x00000000, 0x00000000, 0x00000000, 0x00000003, 176 }; 177 178 /* TODO: flexible timing */ 179 static void mctl_set_timing_lpddr3(struct dram_para *para) 180 { 181 struct sunxi_mctl_ctl_reg * const mctl_ctl = 182 (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE; 183 struct sunxi_mctl_phy_reg * const mctl_phy = 184 (struct sunxi_mctl_phy_reg *)SUNXI_DRAM_PHY0_BASE; 185 186 u8 tccd = 2; 187 u8 tfaw = max(ns_to_t(50), 4); 188 u8 trrd = max(ns_to_t(10), 2); 189 u8 trcd = max(ns_to_t(24), 2); 190 u8 trc = ns_to_t(70); 191 u8 txp = max(ns_to_t(8), 2); 192 u8 twtr = max(ns_to_t(8), 2); 193 u8 trtp = max(ns_to_t(8), 2); 194 u8 twr = max(ns_to_t(15), 2); 195 u8 trp = ns_to_t(18); 196 u8 tras = ns_to_t(42); 197 u8 twtr_sa = ns_to_t(5); 198 u8 tcksrea = ns_to_t(11); 199 u16 trefi = ns_to_t(3900) / 32; 200 u16 trfc = ns_to_t(210); 201 u16 txsr = ns_to_t(220); 202 203 if (CONFIG_DRAM_CLK % 400 == 0) { 204 /* Round up these parameters */ 205 twtr_sa++; 206 tcksrea++; 207 } 208 209 u8 tmrw = 5; 210 u8 tmrd = 5; 211 u8 tmod = 12; 212 u8 tcke = 3; 213 u8 tcksrx = 5; 214 u8 tcksre = 5; 215 u8 tckesr = 5; 216 u8 trasmax = CONFIG_DRAM_CLK / 60; 217 u8 txs = 4; 218 u8 txsdll = 4; 219 u8 txsabort = 4; 220 u8 txsfast = 4; 221 222 u8 tcl = 5; /* CL 10 */ 223 u8 tcwl = 3; /* CWL 6 */ 224 u8 t_rdata_en = twtr_sa + 8; 225 226 u32 tdinit0 = (200 * CONFIG_DRAM_CLK) + 1; /* 200us */ 227 u32 tdinit1 = (100 * CONFIG_DRAM_CLK) / 1000 + 1; /* 100ns */ 228 u32 tdinit2 = (11 * CONFIG_DRAM_CLK) + 1; /* 11us */ 229 u32 tdinit3 = (1 * CONFIG_DRAM_CLK) + 1; /* 1us */ 230 231 u8 twtp = tcwl + 4 + twr + 1; 232 /* 233 * The code below for twr2rd and trd2wr follows the IP core's 234 * document from ZynqMP and i.MX7. The BSP has both number 235 * substracted by 2. 236 */ 237 u8 twr2rd = tcwl + 4 + 1 + twtr; 238 u8 trd2wr = tcl + 4 + (tcksrea >> 1) - tcwl + 1; 239 240 /* set mode register */ 241 memcpy(mctl_phy->mr, mr_lpddr3, sizeof(mr_lpddr3)); 242 243 /* set DRAM timing */ 244 writel((twtp << 24) | (tfaw << 16) | (trasmax << 8) | tras, 245 &mctl_ctl->dramtmg[0]); 246 writel((txp << 16) | (trtp << 8) | trc, &mctl_ctl->dramtmg[1]); 247 writel((tcwl << 24) | (tcl << 16) | (trd2wr << 8) | twr2rd, 248 &mctl_ctl->dramtmg[2]); 249 writel((tmrw << 20) | (tmrd << 12) | tmod, &mctl_ctl->dramtmg[3]); 250 writel((trcd << 24) | (tccd << 16) | (trrd << 8) | trp, 251 &mctl_ctl->dramtmg[4]); 252 writel((tcksrx << 24) | (tcksre << 16) | (tckesr << 8) | tcke, 253 &mctl_ctl->dramtmg[5]); 254 /* Value suggested by ZynqMP manual and used by libdram */ 255 writel((txp + 2) | 0x02020000, &mctl_ctl->dramtmg[6]); 256 writel((txsfast << 24) | (txsabort << 16) | (txsdll << 8) | txs, 257 &mctl_ctl->dramtmg[8]); 258 writel(txsr, &mctl_ctl->dramtmg[14]); 259 260 clrsetbits_le32(&mctl_ctl->init[0], (3 << 30), (1 << 30)); 261 writel(0, &mctl_ctl->dfimisc); 262 clrsetbits_le32(&mctl_ctl->rankctl, 0xff0, 0x660); 263 264 /* 265 * Set timing registers of the PHY. 266 * Note: the PHY is clocked 2x from the DRAM frequency. 267 */ 268 writel((trrd << 25) | (tras << 17) | (trp << 9) | (trtp << 1), 269 &mctl_phy->dtpr[0]); 270 writel((tfaw << 17) | 0x28000400 | (tmrd << 1), &mctl_phy->dtpr[1]); 271 writel(((txs << 6) - 1) | (tcke << 17), &mctl_phy->dtpr[2]); 272 writel(((txsdll << 22) - (0x1 << 16)) | twtr_sa | (tcksrea << 8), 273 &mctl_phy->dtpr[3]); 274 writel((txp << 1) | (trfc << 17) | 0x800, &mctl_phy->dtpr[4]); 275 writel((trc << 17) | (trcd << 9) | (twtr << 1), &mctl_phy->dtpr[5]); 276 writel(0x0505, &mctl_phy->dtpr[6]); 277 278 /* Configure DFI timing */ 279 writel(tcl | 0x2000200 | (t_rdata_en << 16) | 0x808000, 280 &mctl_ctl->dfitmg0); 281 writel(0x040201, &mctl_ctl->dfitmg1); 282 283 /* Configure PHY timing */ 284 writel(tdinit0 | (tdinit1 << 20), &mctl_phy->ptr[3]); 285 writel(tdinit2 | (tdinit3 << 18), &mctl_phy->ptr[4]); 286 287 /* set refresh timing */ 288 writel((trefi << 16) | trfc, &mctl_ctl->rfshtmg); 289 } 290 291 static void mctl_sys_init(struct dram_para *para) 292 { 293 struct sunxi_ccm_reg * const ccm = 294 (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; 295 struct sunxi_mctl_com_reg * const mctl_com = 296 (struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE; 297 struct sunxi_mctl_ctl_reg * const mctl_ctl = 298 (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE; 299 300 /* Put all DRAM-related blocks to reset state */ 301 clrbits_le32(&ccm->mbus_cfg, MBUS_ENABLE | MBUS_RESET); 302 writel(0, &ccm->dram_gate_reset); 303 clrbits_le32(&ccm->pll5_cfg, CCM_PLL5_CTRL_EN); 304 clrbits_le32(&ccm->dram_clk_cfg, DRAM_MOD_RESET); 305 306 udelay(5); 307 308 /* Set PLL5 rate to doubled DRAM clock rate */ 309 writel(CCM_PLL5_CTRL_EN | CCM_PLL5_LOCK_EN | 310 CCM_PLL5_CTRL_N(para->clk * 2 / 24 - 1), &ccm->pll5_cfg); 311 mctl_await_completion(&ccm->pll5_cfg, CCM_PLL5_LOCK, CCM_PLL5_LOCK); 312 313 /* Configure DRAM mod clock */ 314 writel(DRAM_CLK_SRC_PLL5, &ccm->dram_clk_cfg); 315 setbits_le32(&ccm->dram_clk_cfg, DRAM_CLK_UPDATE); 316 writel(BIT(0) | BIT(RESET_SHIFT), &ccm->dram_gate_reset); 317 318 /* Disable all channels */ 319 writel(0, &mctl_com->maer0); 320 writel(0, &mctl_com->maer1); 321 writel(0, &mctl_com->maer2); 322 323 /* Configure MBUS and enable DRAM mod reset */ 324 setbits_le32(&ccm->mbus_cfg, MBUS_RESET); 325 setbits_le32(&ccm->mbus_cfg, MBUS_ENABLE); 326 setbits_le32(&ccm->dram_clk_cfg, DRAM_MOD_RESET); 327 udelay(5); 328 329 /* Unknown hack from the BSP, which enables access of mctl_ctl regs */ 330 writel(0x8000, &mctl_ctl->unk_0x00c); 331 } 332 333 static void mctl_set_addrmap(struct dram_para *para) 334 { 335 struct sunxi_mctl_ctl_reg * const mctl_ctl = 336 (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE; 337 u8 cols = para->cols; 338 u8 rows = para->rows; 339 u8 ranks = para->ranks; 340 341 /* Ranks */ 342 if (ranks == 2) 343 mctl_ctl->addrmap[0] = rows + cols - 3; 344 else 345 mctl_ctl->addrmap[0] = 0x1F; 346 347 /* Banks, hardcoded to 8 banks now */ 348 mctl_ctl->addrmap[1] = (cols - 2) | (cols - 2) << 8 | (cols - 2) << 16; 349 350 /* Columns */ 351 mctl_ctl->addrmap[2] = 0; 352 switch (cols) { 353 case 8: 354 mctl_ctl->addrmap[3] = 0x1F1F0000; 355 mctl_ctl->addrmap[4] = 0x1F1F; 356 break; 357 case 9: 358 mctl_ctl->addrmap[3] = 0x1F000000; 359 mctl_ctl->addrmap[4] = 0x1F1F; 360 break; 361 case 10: 362 mctl_ctl->addrmap[3] = 0; 363 mctl_ctl->addrmap[4] = 0x1F1F; 364 break; 365 case 11: 366 mctl_ctl->addrmap[3] = 0; 367 mctl_ctl->addrmap[4] = 0x1F00; 368 break; 369 case 12: 370 mctl_ctl->addrmap[3] = 0; 371 mctl_ctl->addrmap[4] = 0; 372 break; 373 default: 374 panic("Unsupported DRAM configuration: column number invalid\n"); 375 } 376 377 /* Rows */ 378 mctl_ctl->addrmap[5] = (cols - 3) | ((cols - 3) << 8) | ((cols - 3) << 16) | ((cols - 3) << 24); 379 switch (rows) { 380 case 13: 381 mctl_ctl->addrmap[6] = (cols - 3) | 0x0F0F0F00; 382 mctl_ctl->addrmap[7] = 0x0F0F; 383 break; 384 case 14: 385 mctl_ctl->addrmap[6] = (cols - 3) | ((cols - 3) << 8) | 0x0F0F0000; 386 mctl_ctl->addrmap[7] = 0x0F0F; 387 break; 388 case 15: 389 mctl_ctl->addrmap[6] = (cols - 3) | ((cols - 3) << 8) | ((cols - 3) << 16) | 0x0F000000; 390 mctl_ctl->addrmap[7] = 0x0F0F; 391 break; 392 case 16: 393 mctl_ctl->addrmap[6] = (cols - 3) | ((cols - 3) << 8) | ((cols - 3) << 16) | ((cols - 3) << 24); 394 mctl_ctl->addrmap[7] = 0x0F0F; 395 break; 396 case 17: 397 mctl_ctl->addrmap[6] = (cols - 3) | ((cols - 3) << 8) | ((cols - 3) << 16) | ((cols - 3) << 24); 398 mctl_ctl->addrmap[7] = (cols - 3) | 0x0F00; 399 break; 400 case 18: 401 mctl_ctl->addrmap[6] = (cols - 3) | ((cols - 3) << 8) | ((cols - 3) << 16) | ((cols - 3) << 24); 402 mctl_ctl->addrmap[7] = (cols - 3) | ((cols - 3) << 8); 403 break; 404 default: 405 panic("Unsupported DRAM configuration: row number invalid\n"); 406 } 407 408 /* Bank groups, DDR4 only */ 409 mctl_ctl->addrmap[8] = 0x3F3F; 410 } 411 412 static void mctl_com_init(struct dram_para *para) 413 { 414 struct sunxi_mctl_com_reg * const mctl_com = 415 (struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE; 416 struct sunxi_mctl_ctl_reg * const mctl_ctl = 417 (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE; 418 struct sunxi_mctl_phy_reg * const mctl_phy = 419 (struct sunxi_mctl_phy_reg *)SUNXI_DRAM_PHY0_BASE; 420 u32 reg_val, tmp; 421 422 mctl_set_addrmap(para); 423 424 setbits_le32(&mctl_com->cr, BIT(31)); 425 /* 426 * This address is magic; it's in SID memory area, but there's no 427 * known definition of it. 428 * On my Pine H64 board it has content 7. 429 */ 430 if (readl(0x03006100) == 7) 431 clrbits_le32(&mctl_com->cr, BIT(27)); 432 else if (readl(0x03006100) == 3) 433 setbits_le32(&mctl_com->cr, BIT(27)); 434 435 if (para->clk > 408) 436 reg_val = 0xf00; 437 else if (para->clk > 246) 438 reg_val = 0x1f00; 439 else 440 reg_val = 0x3f00; 441 clrsetbits_le32(&mctl_com->unk_0x008, 0x3f00, reg_val); 442 443 /* TODO: half DQ, non-LPDDR3 types */ 444 writel(MSTR_DEVICETYPE_LPDDR3 | MSTR_BUSWIDTH_FULL | 445 MSTR_BURST_LENGTH(8) | MSTR_ACTIVE_RANKS(para->ranks) | 446 0x80000000, &mctl_ctl->mstr); 447 writel(DCR_LPDDR3 | DCR_DDR8BANK | 0x400, &mctl_phy->dcr); 448 449 if (para->ranks == 2) 450 writel(0x0303, &mctl_ctl->odtmap); 451 else 452 writel(0x0201, &mctl_ctl->odtmap); 453 454 /* TODO: non-LPDDR3 types */ 455 tmp = para->clk * 7 / 2000; 456 reg_val = 0x0400; 457 reg_val |= (tmp + 7) << 24; 458 reg_val |= (((para->clk < 400) ? 3 : 4) - tmp) << 16; 459 writel(reg_val, &mctl_ctl->odtcfg); 460 461 /* TODO: half DQ */ 462 } 463 464 static void mctl_bit_delay_set(struct dram_para *para) 465 { 466 struct sunxi_mctl_phy_reg * const mctl_phy = 467 (struct sunxi_mctl_phy_reg *)SUNXI_DRAM_PHY0_BASE; 468 int i, j; 469 u32 val; 470 471 for (i = 0; i < 4; i++) { 472 val = readl(&mctl_phy->dx[i].bdlr0); 473 for (j = 0; j < 4; j++) 474 val += para->dx_write_delays[i][j] << (j * 8); 475 writel(val, &mctl_phy->dx[i].bdlr0); 476 477 val = readl(&mctl_phy->dx[i].bdlr1); 478 for (j = 0; j < 4; j++) 479 val += para->dx_write_delays[i][j + 4] << (j * 8); 480 writel(val, &mctl_phy->dx[i].bdlr1); 481 482 val = readl(&mctl_phy->dx[i].bdlr2); 483 for (j = 0; j < 4; j++) 484 val += para->dx_write_delays[i][j + 8] << (j * 8); 485 writel(val, &mctl_phy->dx[i].bdlr2); 486 } 487 clrbits_le32(&mctl_phy->pgcr[0], BIT(26)); 488 489 for (i = 0; i < 4; i++) { 490 val = readl(&mctl_phy->dx[i].bdlr3); 491 for (j = 0; j < 4; j++) 492 val += para->dx_read_delays[i][j] << (j * 8); 493 writel(val, &mctl_phy->dx[i].bdlr3); 494 495 val = readl(&mctl_phy->dx[i].bdlr4); 496 for (j = 0; j < 4; j++) 497 val += para->dx_read_delays[i][j + 4] << (j * 8); 498 writel(val, &mctl_phy->dx[i].bdlr4); 499 500 val = readl(&mctl_phy->dx[i].bdlr5); 501 for (j = 0; j < 4; j++) 502 val += para->dx_read_delays[i][j + 8] << (j * 8); 503 writel(val, &mctl_phy->dx[i].bdlr5); 504 505 val = readl(&mctl_phy->dx[i].bdlr6); 506 val += (para->dx_read_delays[i][12] << 8) | 507 (para->dx_read_delays[i][13] << 16); 508 writel(val, &mctl_phy->dx[i].bdlr6); 509 } 510 setbits_le32(&mctl_phy->pgcr[0], BIT(26)); 511 udelay(1); 512 513 for (i = 1; i < 14; i++) { 514 val = readl(&mctl_phy->acbdlr[i]); 515 val += 0x0a0a0a0a; 516 writel(val, &mctl_phy->acbdlr[i]); 517 } 518 } 519 520 static void mctl_channel_init(struct dram_para *para) 521 { 522 struct sunxi_mctl_com_reg * const mctl_com = 523 (struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE; 524 struct sunxi_mctl_ctl_reg * const mctl_ctl = 525 (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE; 526 struct sunxi_mctl_phy_reg * const mctl_phy = 527 (struct sunxi_mctl_phy_reg *)SUNXI_DRAM_PHY0_BASE; 528 int i; 529 u32 val; 530 531 setbits_le32(&mctl_ctl->dfiupd[0], BIT(31) | BIT(30)); 532 setbits_le32(&mctl_ctl->zqctl[0], BIT(31) | BIT(30)); 533 writel(0x2f05, &mctl_ctl->sched[0]); 534 setbits_le32(&mctl_ctl->rfshctl3, BIT(0)); 535 setbits_le32(&mctl_ctl->dfimisc, BIT(0)); 536 setbits_le32(&mctl_ctl->unk_0x00c, BIT(8)); 537 clrsetbits_le32(&mctl_phy->pgcr[1], 0x180, 0xc0); 538 /* TODO: non-LPDDR3 types */ 539 clrsetbits_le32(&mctl_phy->pgcr[2], GENMASK(17, 0), ns_to_t(7800)); 540 clrbits_le32(&mctl_phy->pgcr[6], BIT(0)); 541 clrsetbits_le32(&mctl_phy->dxccr, 0xee0, 0x220); 542 /* TODO: VT compensation */ 543 clrsetbits_le32(&mctl_phy->dsgcr, BIT(0), 0x440060); 544 clrbits_le32(&mctl_phy->vtcr[1], BIT(1)); 545 546 for (i = 0; i < 4; i++) 547 clrsetbits_le32(&mctl_phy->dx[i].gcr[0], 0xe00, 0x800); 548 for (i = 0; i < 4; i++) 549 clrsetbits_le32(&mctl_phy->dx[i].gcr[2], 0xffff, 0x5555); 550 for (i = 0; i < 4; i++) 551 clrsetbits_le32(&mctl_phy->dx[i].gcr[3], 0x3030, 0x1010); 552 553 udelay(100); 554 555 if (para->ranks == 2) 556 setbits_le32(&mctl_phy->dtcr[1], 0x30000); 557 else 558 clrsetbits_le32(&mctl_phy->dtcr[1], 0x30000, 0x10000); 559 560 clrbits_le32(&mctl_phy->dtcr[1], BIT(1)); 561 if (para->ranks == 2) { 562 writel(0x00010001, &mctl_phy->rankidr); 563 writel(0x20000, &mctl_phy->odtcr); 564 } else { 565 writel(0x0, &mctl_phy->rankidr); 566 writel(0x10000, &mctl_phy->odtcr); 567 } 568 569 /* TODO: non-LPDDR3 types */ 570 clrsetbits_le32(&mctl_phy->dtcr[0], 0xF0000000, 0x10000040); 571 if (para->clk <= 792) { 572 if (para->clk <= 672) { 573 if (para->clk <= 600) 574 val = 0x300; 575 else 576 val = 0x400; 577 } else { 578 val = 0x500; 579 } 580 } else { 581 val = 0x600; 582 } 583 /* FIXME: NOT REVIEWED YET */ 584 clrsetbits_le32(&mctl_phy->zq[0].zqcr, 0x700, val); 585 clrsetbits_le32(&mctl_phy->zq[0].zqpr[0], 0xff, 586 CONFIG_DRAM_ZQ & 0xff); 587 clrbits_le32(&mctl_phy->zq[0].zqor[0], 0xfffff); 588 setbits_le32(&mctl_phy->zq[0].zqor[0], (CONFIG_DRAM_ZQ >> 8) & 0xff); 589 setbits_le32(&mctl_phy->zq[0].zqor[0], (CONFIG_DRAM_ZQ & 0xf00) - 0x100); 590 setbits_le32(&mctl_phy->zq[0].zqor[0], (CONFIG_DRAM_ZQ & 0xff00) << 4); 591 clrbits_le32(&mctl_phy->zq[1].zqpr[0], 0xfffff); 592 setbits_le32(&mctl_phy->zq[1].zqpr[0], (CONFIG_DRAM_ZQ >> 16) & 0xff); 593 setbits_le32(&mctl_phy->zq[1].zqpr[0], ((CONFIG_DRAM_ZQ >> 8) & 0xf00) - 0x100); 594 setbits_le32(&mctl_phy->zq[1].zqpr[0], (CONFIG_DRAM_ZQ & 0xff0000) >> 4); 595 if (para->type == SUNXI_DRAM_TYPE_LPDDR3) { 596 for (i = 1; i < 14; i++) 597 writel(0x06060606, &mctl_phy->acbdlr[i]); 598 } 599 600 /* TODO: non-LPDDR3 types */ 601 mctl_phy_pir_init(PIR_ZCAL | PIR_DCAL | PIR_PHYRST | PIR_DRAMINIT | 602 PIR_QSGATE | PIR_RDDSKW | PIR_WRDSKW | PIR_RDEYE | 603 PIR_WREYE); 604 605 /* TODO: non-LPDDR3 types */ 606 for (i = 0; i < 4; i++) 607 writel(0x00000909, &mctl_phy->dx[i].gcr[5]); 608 609 for (i = 0; i < 4; i++) { 610 if (IS_ENABLED(CONFIG_DRAM_ODT_EN)) 611 val = 0x0; 612 else 613 val = 0xaaaa; 614 clrsetbits_le32(&mctl_phy->dx[i].gcr[2], 0xffff, val); 615 616 if (IS_ENABLED(CONFIG_DRAM_ODT_EN)) 617 val = 0x0; 618 else 619 val = 0x2020; 620 clrsetbits_le32(&mctl_phy->dx[i].gcr[3], 0x3030, val); 621 } 622 623 mctl_bit_delay_set(para); 624 udelay(1); 625 626 setbits_le32(&mctl_phy->pgcr[6], BIT(0)); 627 clrbits_le32(&mctl_phy->pgcr[6], 0xfff8); 628 for (i = 0; i < 4; i++) 629 clrbits_le32(&mctl_phy->dx[i].gcr[3], ~0x3ffff); 630 udelay(10); 631 632 if (readl(&mctl_phy->pgsr[0]) & 0x400000) 633 { 634 /* 635 * Detect single rank. 636 * TODO: also detect half DQ. 637 */ 638 if ((readl(&mctl_phy->dx[0].rsr[0]) & 0x3) == 2 && 639 (readl(&mctl_phy->dx[1].rsr[0]) & 0x3) == 2 && 640 (readl(&mctl_phy->dx[2].rsr[0]) & 0x3) == 2 && 641 (readl(&mctl_phy->dx[3].rsr[0]) & 0x3) == 2) { 642 para->ranks = 1; 643 /* Restart DRAM initialization from scratch. */ 644 mctl_core_init(para); 645 return; 646 } 647 else { 648 panic("This DRAM setup is currently not supported.\n"); 649 } 650 } 651 652 if (readl(&mctl_phy->pgsr[0]) & 0xff00000) { 653 /* Oops! There's something wrong! */ 654 debug("PLL = %x\n", readl(0x3001010)); 655 debug("DRAM PHY PGSR0 = %x\n", readl(&mctl_phy->pgsr[0])); 656 for (i = 0; i < 4; i++) 657 debug("DRAM PHY DX%dRSR0 = %x\n", i, readl(&mctl_phy->dx[i].rsr[0])); 658 panic("Error while initializing DRAM PHY!\n"); 659 } 660 661 clrsetbits_le32(&mctl_phy->dsgcr, 0xc0, 0x40); 662 clrbits_le32(&mctl_phy->pgcr[1], 0x40); 663 clrbits_le32(&mctl_ctl->dfimisc, BIT(0)); 664 writel(1, &mctl_ctl->swctl); 665 mctl_await_completion(&mctl_ctl->swstat, 1, 1); 666 clrbits_le32(&mctl_ctl->rfshctl3, BIT(0)); 667 668 setbits_le32(&mctl_com->unk_0x014, BIT(31)); 669 writel(0xffffffff, &mctl_com->maer0); 670 writel(0x7ff, &mctl_com->maer1); 671 writel(0xffff, &mctl_com->maer2); 672 } 673 674 static void mctl_auto_detect_dram_size(struct dram_para *para) 675 { 676 /* TODO: non-LPDDR3, half DQ */ 677 /* 678 * Detect rank number by the code in mctl_channel_init. Furtherly 679 * when DQ detection is available it will also be executed there. 680 */ 681 mctl_core_init(para); 682 683 /* detect row address bits */ 684 para->cols = 8; 685 para->rows = 18; 686 mctl_core_init(para); 687 688 for (para->rows = 13; para->rows < 18; para->rows++) { 689 /* 8 banks, 8 bit per byte and 32 bit width */ 690 if (mctl_mem_matches((1 << (para->rows + para->cols + 5)))) 691 break; 692 } 693 694 /* detect column address bits */ 695 para->cols = 11; 696 mctl_core_init(para); 697 698 for (para->cols = 8; para->cols < 11; para->cols++) { 699 /* 8 bits per byte and 32 bit width */ 700 if (mctl_mem_matches(1 << (para->cols + 2))) 701 break; 702 } 703 } 704 705 unsigned long mctl_calc_size(struct dram_para *para) 706 { 707 /* TODO: non-LPDDR3, half DQ */ 708 709 /* 8 banks, 32-bit (4 byte) data width */ 710 return (1ULL << (para->cols + para->rows + 3)) * 4 * para->ranks; 711 } 712 713 #define SUN50I_H6_DX_WRITE_DELAYS \ 714 {{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, \ 715 { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, \ 716 { 0, 0, 0, 0, 0, 0, 0, 0, 0, 4, 4, 0 }, \ 717 { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }} 718 #define SUN50I_H6_DX_READ_DELAYS \ 719 {{ 4, 4, 4, 4, 4, 4, 4, 4, 4, 0, 0, 0, 0, 0 }, \ 720 { 4, 4, 4, 4, 4, 4, 4, 4, 4, 0, 0, 0, 0, 0 }, \ 721 { 4, 4, 4, 4, 4, 4, 4, 4, 4, 0, 0, 0, 0, 0 }, \ 722 { 4, 4, 4, 4, 4, 4, 4, 4, 4, 0, 0, 0, 0, 0 }} 723 724 unsigned long sunxi_dram_init(void) 725 { 726 struct sunxi_mctl_com_reg * const mctl_com = 727 (struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE; 728 struct dram_para para = { 729 .clk = CONFIG_DRAM_CLK, 730 .type = SUNXI_DRAM_TYPE_LPDDR3, 731 .ranks = 2, 732 .cols = 11, 733 .rows = 14, 734 .dx_read_delays = SUN50I_H6_DX_READ_DELAYS, 735 .dx_write_delays = SUN50I_H6_DX_WRITE_DELAYS, 736 }; 737 738 unsigned long size; 739 740 /* RES_CAL_CTRL_REG in BSP U-boot*/ 741 setbits_le32(0x7010310, BIT(8)); 742 clrbits_le32(0x7010318, 0x3f); 743 744 mctl_auto_detect_dram_size(¶); 745 746 mctl_core_init(¶); 747 748 size = mctl_calc_size(¶); 749 750 clrsetbits_le32(&mctl_com->cr, 0xf0, (size >> (10 + 10 + 4)) & 0xf0); 751 752 mctl_set_master_priority(); 753 754 return size; 755 }; 756