xref: /openbmc/u-boot/arch/arm/mach-socfpga/spl_s10.c (revision 5c8fd32b)
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * Copyright (C) 2016-2018 Intel Corporation <www.intel.com>
4  *
5  */
6 
7 #include <asm/io.h>
8 #include <asm/u-boot.h>
9 #include <asm/utils.h>
10 #include <common.h>
11 #include <debug_uart.h>
12 #include <image.h>
13 #include <spl.h>
14 #include <asm/arch/clock_manager.h>
15 #include <asm/arch/firewall_s10.h>
16 #include <asm/arch/mailbox_s10.h>
17 #include <asm/arch/reset_manager.h>
18 #include <asm/arch/sdram_s10.h>
19 #include <asm/arch/system_manager.h>
20 #include <watchdog.h>
21 
22 DECLARE_GLOBAL_DATA_PTR;
23 
24 static struct socfpga_system_manager *sysmgr_regs =
25 	(struct socfpga_system_manager *)SOCFPGA_SYSMGR_ADDRESS;
26 
27 u32 spl_boot_device(void)
28 {
29 	/* TODO: Get from SDM or handoff */
30 	return BOOT_DEVICE_MMC1;
31 }
32 
33 #ifdef CONFIG_SPL_MMC_SUPPORT
34 u32 spl_boot_mode(const u32 boot_device)
35 {
36 #if defined(CONFIG_SPL_FAT_SUPPORT) || defined(CONFIG_SPL_EXT_SUPPORT)
37 	return MMCSD_MODE_FS;
38 #else
39 	return MMCSD_MODE_RAW;
40 #endif
41 }
42 #endif
43 
44 void spl_disable_firewall_l4_per(void)
45 {
46 	const struct socfpga_firwall_l4_per *firwall_l4_per_base =
47 		(struct socfpga_firwall_l4_per *)SOCFPGA_FIREWALL_L4_PER;
48 	u32 i;
49 	const u32 *addr[] = {
50 			&firwall_l4_per_base->nand,
51 			&firwall_l4_per_base->nand_data,
52 			&firwall_l4_per_base->usb0,
53 			&firwall_l4_per_base->usb1,
54 			&firwall_l4_per_base->spim0,
55 			&firwall_l4_per_base->spim1,
56 			&firwall_l4_per_base->emac0,
57 			&firwall_l4_per_base->emac1,
58 			&firwall_l4_per_base->emac2,
59 			&firwall_l4_per_base->sdmmc,
60 			&firwall_l4_per_base->gpio0,
61 			&firwall_l4_per_base->gpio1,
62 			&firwall_l4_per_base->i2c0,
63 			&firwall_l4_per_base->i2c1,
64 			&firwall_l4_per_base->i2c2,
65 			&firwall_l4_per_base->i2c3,
66 			&firwall_l4_per_base->i2c4,
67 			&firwall_l4_per_base->timer0,
68 			&firwall_l4_per_base->timer1,
69 			&firwall_l4_per_base->uart0,
70 			&firwall_l4_per_base->uart1
71 			};
72 
73 	/*
74 	 * The following lines of code will enable non-secure access
75 	 * to nand, usb, spi, emac, sdmmc, gpio, i2c, timers and uart. This
76 	 * is needed as most OS run in non-secure mode. Thus we need to
77 	 * enable non-secure access to these peripherals in order for the
78 	 * OS to use these peripherals.
79 	 */
80 	for (i = 0; i < ARRAY_SIZE(addr); i++)
81 		writel(FIREWALL_L4_DISABLE_ALL, addr[i]);
82 }
83 
84 void spl_disable_firewall_l4_sys(void)
85 {
86 	const struct socfpga_firwall_l4_sys *firwall_l4_sys_base =
87 		(struct socfpga_firwall_l4_sys *)SOCFPGA_FIREWALL_L4_SYS;
88 	u32 i;
89 	const u32 *addr[] = {
90 			&firwall_l4_sys_base->dma_ecc,
91 			&firwall_l4_sys_base->emac0rx_ecc,
92 			&firwall_l4_sys_base->emac0tx_ecc,
93 			&firwall_l4_sys_base->emac1rx_ecc,
94 			&firwall_l4_sys_base->emac1tx_ecc,
95 			&firwall_l4_sys_base->emac2rx_ecc,
96 			&firwall_l4_sys_base->emac2tx_ecc,
97 			&firwall_l4_sys_base->nand_ecc,
98 			&firwall_l4_sys_base->nand_read_ecc,
99 			&firwall_l4_sys_base->nand_write_ecc,
100 			&firwall_l4_sys_base->ocram_ecc,
101 			&firwall_l4_sys_base->sdmmc_ecc,
102 			&firwall_l4_sys_base->usb0_ecc,
103 			&firwall_l4_sys_base->usb1_ecc,
104 			&firwall_l4_sys_base->clock_manager,
105 			&firwall_l4_sys_base->io_manager,
106 			&firwall_l4_sys_base->reset_manager,
107 			&firwall_l4_sys_base->system_manager,
108 			&firwall_l4_sys_base->watchdog0,
109 			&firwall_l4_sys_base->watchdog1,
110 			&firwall_l4_sys_base->watchdog2,
111 			&firwall_l4_sys_base->watchdog3
112 		};
113 
114 	for (i = 0; i < ARRAY_SIZE(addr); i++)
115 		writel(FIREWALL_L4_DISABLE_ALL, addr[i]);
116 }
117 
118 void board_init_f(ulong dummy)
119 {
120 	const struct cm_config *cm_default_cfg = cm_get_default_config();
121 	int ret;
122 
123 #ifdef CONFIG_HW_WATCHDOG
124 	/* Ensure watchdog is paused when debugging is happening */
125 	writel(SYSMGR_WDDBG_PAUSE_ALL_CPU, &sysmgr_regs->wddbg);
126 
127 	/* Enable watchdog before initializing the HW */
128 	socfpga_per_reset(SOCFPGA_RESET(L4WD0), 1);
129 	socfpga_per_reset(SOCFPGA_RESET(L4WD0), 0);
130 	hw_watchdog_init();
131 #endif
132 
133 	/* ensure all processors are not released prior Linux boot */
134 	writeq(0, CPU_RELEASE_ADDR);
135 
136 	socfpga_per_reset(SOCFPGA_RESET(OSC1TIMER0), 0);
137 	timer_init();
138 
139 	sysmgr_pinmux_init();
140 
141 	/* configuring the HPS clocks */
142 	cm_basic_init(cm_default_cfg);
143 
144 #ifdef CONFIG_DEBUG_UART
145 	socfpga_per_reset(SOCFPGA_RESET(UART0), 0);
146 	debug_uart_init();
147 #endif
148 	ret = spl_early_init();
149 	if (ret) {
150 		debug("spl_early_init() failed: %d\n", ret);
151 		hang();
152 	}
153 
154 	preloader_console_init();
155 	cm_print_clock_quick_summary();
156 
157 	/* enable non-secure interface to DMA330 DMA and peripherals */
158 	writel(SYSMGR_DMA_IRQ_NS | SYSMGR_DMA_MGR_NS, &sysmgr_regs->dma);
159 	writel(SYSMGR_DMAPERIPH_ALL_NS, &sysmgr_regs->dma_periph);
160 
161 	spl_disable_firewall_l4_per();
162 
163 	spl_disable_firewall_l4_sys();
164 
165 	/* disable lwsocf2fpga and soc2fpga bridge security */
166 	writel(FIREWALL_BRIDGE_DISABLE_ALL, SOCFPGA_FIREWALL_SOC2FPGA);
167 	writel(FIREWALL_BRIDGE_DISABLE_ALL, SOCFPGA_FIREWALL_LWSOC2FPGA);
168 
169 	/* disable SMMU security */
170 	writel(FIREWALL_L4_DISABLE_ALL, SOCFPGA_FIREWALL_TCU);
171 
172 	/* disable ocram security at CCU for non secure access */
173 	clrbits_le32(CCU_REG_ADDR(CCU_CPU0_MPRT_ADMASK_MEM_RAM0),
174 		     CCU_ADMASK_P_MASK | CCU_ADMASK_NS_MASK);
175 	clrbits_le32(CCU_REG_ADDR(CCU_IOM_MPRT_ADMASK_MEM_RAM0),
176 		     CCU_ADMASK_P_MASK | CCU_ADMASK_NS_MASK);
177 
178 	debug("DDR: Initializing Hard Memory Controller\n");
179 	if (sdram_mmr_init_full(0)) {
180 		puts("DDR: Initialization failed.\n");
181 		hang();
182 	}
183 
184 	gd->ram_size = sdram_calculate_size();
185 	printf("DDR: %d MiB\n", (int)(gd->ram_size >> 20));
186 
187 	/* Sanity check ensure correct SDRAM size specified */
188 	debug("DDR: Running SDRAM size sanity check\n");
189 	if (get_ram_size(0, gd->ram_size) != gd->ram_size) {
190 		puts("DDR: SDRAM size check failed!\n");
191 		hang();
192 	}
193 	debug("DDR: SDRAM size check passed!\n");
194 
195 	mbox_init();
196 
197 #ifdef CONFIG_CADENCE_QSPI
198 	mbox_qspi_open();
199 #endif
200 }
201